From: Valerio Messina <efa@iol.it>
To: linux-media@vger.kernel.org
Subject: Re: Terratec Cinergy HibridT XS
Date: Wed, 05 Aug 2009 22:08:23 +0200 [thread overview]
Message-ID: <4A79E6B7.5090408@iol.it> (raw)
In-Reply-To: <829197380908051251x6996414ek951d259373401dd7@mail.gmail.com>
Devin Heitmueller ha scritto:
> I don't know what the process is for uninstalling the mcentral.de
> em28xx driver. Probably involves removing that directory and
> re-running depmod or something.
ok, I run:
$ sudo mv /lib/modules/2.6.28-14-generic/empia/ ~/temp
$ sudo depmod -a
then connected the TVtuner, Kaffeine identify the TV tuner and the
video/audio is OK.
And now IR send digit to text editor and Kaffeine.
thanks
Valerio
dmesg show:
Aug 5 21:59:50 01ath3200 kernel: [ 6635.764021] usb 1-3: new high speed
USB device using ehci_hcd and address 4
Aug 5 21:59:50 01ath3200 kernel: [ 6635.906865] usb 1-3: configuration
#1 chosen from 1 choice
Aug 5 21:59:50 01ath3200 kernel: [ 6636.195926] em28xx: New device
TerraTec Electronic GmbH Cinergy Hybrid T USB XS @ 480 Mbps (0ccd:0042,
interface 0, class 0)
Aug 5 21:59:50 01ath3200 kernel: [ 6636.195934] em28xx #0: Identified
as Terratec Hybrid XS (card=11)
Aug 5 21:59:50 01ath3200 kernel: [ 6636.204453] em28xx #0: chip ID is
em2882/em2883
Aug 5 21:59:50 01ath3200 kernel: [ 6636.364894] em28xx #0: i2c eeprom
00: 1a eb 67 95 cd 0c 42 00 50 12 5c 03 6a 32 9c 34
Aug 5 21:59:50 01ath3200 kernel: [ 6636.364903] em28xx #0: i2c eeprom
10: 00 00 06 57 46 07 00 00 00 00 00 00 00 00 00 00
Aug 5 21:59:50 01ath3200 kernel: [ 6636.364910] em28xx #0: i2c eeprom
20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 00 00 00
Aug 5 21:59:50 01ath3200 kernel: [ 6636.364917] em28xx #0: i2c eeprom
30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
Aug 5 21:59:50 01ath3200 kernel: [ 6636.364923] em28xx #0: i2c eeprom
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Aug 5 21:59:50 01ath3200 kernel: [ 6636.364929] em28xx #0: i2c eeprom
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Aug 5 21:59:50 01ath3200 kernel: [ 6636.364936] em28xx #0: i2c eeprom
60: 00 00 00 00 00 00 00 00 00 00 32 03 43 00 69 00
Aug 5 21:59:50 01ath3200 kernel: [ 6636.364942] em28xx #0: i2c eeprom
70: 6e 00 65 00 72 00 67 00 79 00 20 00 48 00 79 00
Aug 5 21:59:50 01ath3200 kernel: [ 6636.364948] em28xx #0: i2c eeprom
80: 62 00 72 00 69 00 64 00 20 00 54 00 20 00 55 00
Aug 5 21:59:50 01ath3200 kernel: [ 6636.364955] em28xx #0: i2c eeprom
90: 53 00 42 00 20 00 58 00 53 00 00 00 34 03 54 00
Aug 5 21:59:50 01ath3200 kernel: [ 6636.364961] em28xx #0: i2c eeprom
a0: 65 00 72 00 72 00 61 00 54 00 65 00 63 00 20 00
Aug 5 21:59:50 01ath3200 kernel: [ 6636.364968] em28xx #0: i2c eeprom
b0: 45 00 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00
Aug 5 21:59:50 01ath3200 kernel: [ 6636.364974] em28xx #0: i2c eeprom
c0: 69 00 63 00 20 00 47 00 6d 00 62 00 48 00 00 00
Aug 5 21:59:50 01ath3200 kernel: [ 6636.364980] em28xx #0: i2c eeprom
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Aug 5 21:59:50 01ath3200 kernel: [ 6636.364987] em28xx #0: i2c eeprom
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Aug 5 21:59:50 01ath3200 kernel: [ 6636.364993] em28xx #0: i2c eeprom
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Aug 5 21:59:50 01ath3200 kernel: [ 6636.365001] em28xx #0: EEPROM ID=
0x9567eb1a, EEPROM hash = 0x41d0bf96
Aug 5 21:59:50 01ath3200 kernel: [ 6636.365002] em28xx #0: EEPROM info:
Aug 5 21:59:50 01ath3200 kernel: [ 6636.365004] em28xx #0:^IAC97 audio
(5 sample rates)
Aug 5 21:59:50 01ath3200 kernel: [ 6636.365006] em28xx #0:^I500mA max power
Aug 5 21:59:50 01ath3200 kernel: [ 6636.365008] em28xx #0:^ITable at
0x06, strings=0x326a, 0x349c, 0x0000
Aug 5 21:59:50 01ath3200 kernel: [ 6636.382818] tvp5150 1-005c: chip
found @ 0xb8 (em28xx #0)
Aug 5 21:59:50 01ath3200 kernel: [ 6636.398433] tuner 1-0061: chip
found @ 0xc2 (em28xx #0)
Aug 5 21:59:50 01ath3200 kernel: [ 6636.408529] xc2028 1-0061: creating
new instance
Aug 5 21:59:50 01ath3200 kernel: [ 6636.408533] xc2028 1-0061: type set
to XCeive xc2028/xc3028 tuner
Aug 5 21:59:50 01ath3200 kernel: [ 6636.408543] usb 1-3: firmware:
requesting xc3028-v27.fw
Aug 5 21:59:50 01ath3200 kernel: [ 6636.484304] xc2028 1-0061: Loading
80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
Aug 5 21:59:50 01ath3200 kernel: [ 6636.532022] xc2028 1-0061: Loading
firmware for type=BASE (1), id 0000000000000000.
Aug 5 21:59:51 01ath3200 kernel: [ 6637.614070] xc2028 1-0061: Loading
firmware for type=(0), id 000000000000b700.
Aug 5 21:59:51 01ath3200 kernel: [ 6637.630491] SCODE (20000000), id
000000000000b700:
Aug 5 21:59:51 01ath3200 kernel: [ 6637.630496] xc2028 1-0061: Loading
SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
Aug 5 21:59:52 01ath3200 kernel: [ 6637.812497] input: em28xx IR
(em28xx #0) as /devices/pci0000:00/0000:00:03.3/usb1/1-3/input/input10
Aug 5 21:59:52 01ath3200 pulseaudio[4364]: alsa-util.c: Cannot find
fallback mixer control "Mic" or mixer control is no combination of
switch/volume.
Aug 5 21:59:52 01ath3200 kernel: [ 6637.836243] em28xx #0: Config
register raw data: 0x50
Aug 5 21:59:52 01ath3200 kernel: [ 6637.836986] em28xx #0: AC97 vendor
ID = 0xffffffff
Aug 5 21:59:52 01ath3200 kernel: [ 6637.837368] em28xx #0: AC97
features = 0x6a90
Aug 5 21:59:52 01ath3200 kernel: [ 6637.837370] em28xx #0: Empia 202
AC97 audio processor detected
Aug 5 21:59:52 01ath3200 kernel: [ 6637.948487] tvp5150 1-005c:
tvp5150am1 detected.
Aug 5 21:59:52 01ath3200 kernel: [ 6638.044877] em28xx #0: v4l2 driver
version 0.1.2
Aug 5 21:59:52 01ath3200 kernel: [ 6638.115102] em28xx #0: V4L2 device
registered as /dev/video0 and /dev/vbi0
Aug 5 21:59:52 01ath3200 kernel: [ 6638.131502] usbcore: registered new
interface driver em28xx
Aug 5 21:59:52 01ath3200 kernel: [ 6638.131507] em28xx driver loaded
Aug 5 21:59:52 01ath3200 kernel: [ 6638.280453] xc2028 1-0061:
attaching existing instance
Aug 5 21:59:52 01ath3200 kernel: [ 6638.280457] xc2028 1-0061: type set
to XCeive xc2028/xc3028 tuner
Aug 5 21:59:52 01ath3200 kernel: [ 6638.280460] em28xx #0/2: xc3028
attached
Aug 5 21:59:52 01ath3200 kernel: [ 6638.280463] DVB: registering new
adapter (em28xx #0)
Aug 5 21:59:52 01ath3200 kernel: [ 6638.280467] DVB: registering
adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)...
Aug 5 21:59:52 01ath3200 kernel: [ 6638.280878] Successfully loaded
em28xx-dvb
Aug 5 21:59:52 01ath3200 kernel: [ 6638.280881] Em28xx: Initialized
(Em28xx dvb Extension) extension
Aug 5 21:59:52 01ath3200 kernel: [ 6638.564739] tvp5150 1-005c:
tvp5150am1 detected.
Aug 5 22:00:36 01ath3200 kernel: [ 6681.848015] xc2028 1-0061: Loading
firmware for type=BASE F8MHZ (3), id 0000000000000000.
Aug 5 22:00:37 01ath3200 kernel: [ 6682.781882] xc2028 1-0061: Loading
firmware for type=D2633 DTV8 (210), id 0000000000000000.
Aug 5 22:00:37 01ath3200 kernel: [ 6682.795251] xc2028 1-0061: Loading
SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760
(620003e0), id 0000000000000000.
next prev parent reply other threads:[~2009-08-05 20:08 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-28 23:32 Terratec Cinergy HibridT XS Valerio Messina
2009-07-29 0:44 ` Devin Heitmueller
2009-07-29 2:28 ` hermann pitton
2009-07-29 5:45 ` Markus Rechberger
2009-07-29 9:00 ` Simon Kenyon
2009-07-30 0:07 ` hermann pitton
2009-07-30 6:42 ` Valerio Messina
2009-07-30 12:33 ` Devin Heitmueller
2009-07-31 6:37 ` Valerio Messina
2009-07-31 8:02 ` Devin Heitmueller
2009-07-31 8:09 ` Devin Heitmueller
2009-08-01 1:43 ` Valerio Messina
2009-08-01 22:48 ` Valerio Messina
2009-08-03 1:26 ` Devin Heitmueller
2009-08-04 3:02 ` Devin Heitmueller
2009-08-05 7:17 ` Valerio Messina
2009-08-05 13:27 ` Devin Heitmueller
2009-08-05 14:27 ` Mauro Carvalho Chehab
2009-08-05 18:26 ` Valerio Messina
2009-08-05 18:34 ` Devin Heitmueller
2009-08-05 19:41 ` Valerio Messina
2009-08-05 19:51 ` Devin Heitmueller
2009-08-05 20:08 ` Valerio Messina [this message]
2009-08-05 20:22 ` Devin Heitmueller
2009-08-05 21:40 ` Valerio Messina
2009-08-05 21:51 ` Devin Heitmueller
2009-08-05 22:49 ` Valerio Messina
2009-08-06 1:43 ` Devin Heitmueller
2009-08-11 13:35 ` Valerio Messina
2009-08-05 19:52 ` Devin Heitmueller
2009-08-02 9:21 ` Valerio Messina
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A79E6B7.5090408@iol.it \
--to=efa@iol.it \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.