From: "Gábor Stefanik" <netrolller.3d@gmail.com>
To: John Linville <linville@tuxdriver.com>, Michael Buesch <mb@bu3sch.de>
Cc: Larry Finger <Larry.Finger@lwfinger.net>,
Johannes Berg <johannes@sipsolutions.net>,
linux-wireless <linux-wireless@vger.kernel.org>,
Broadcom Wireless <bcm43xx-dev@lists.berlios.de>
Subject: [PATCH] b43: LP-PHY: Implement STX synchronization
Date: Sun, 09 Aug 2009 20:15:09 +0200 [thread overview]
Message-ID: <4A7F122D.3010803@gmail.com> (raw)
The v2+ radio init (B2063) is now complete, modulo BCM4325 support.
Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com>
---
drivers/net/wireless/b43/phy_lp.c | 57 +++++++++++++++++++++++++++++++++++-
1 files changed, 55 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c
index 5d50943..27eadee 100644
--- a/drivers/net/wireless/b43/phy_lp.c
+++ b/drivers/net/wireless/b43/phy_lp.c
@@ -346,9 +346,60 @@ static void lpphy_2063_init(struct b43_wldev *dev)
b43_radio_write(dev, B2063_PA_SP2, 0x18);
}
+struct lpphy_stx_table_entry {
+ u16 phy_offset;
+ u16 phy_shift;
+ u16 rf_addr;
+ u16 rf_shift;
+ u16 mask;
+};
+
+static const struct lpphy_stx_table_entry lpphy_stx_table[] = {
+ { .phy_offset = 2, .phy_shift = 6, .rf_addr = 0x3d, .rf_shift = 3, .mask = 0x01, },
+ { .phy_offset = 1, .phy_shift = 12, .rf_addr = 0x4c, .rf_shift = 1, .mask = 0x01, },
+ { .phy_offset = 1, .phy_shift = 8, .rf_addr = 0x50, .rf_shift = 0, .mask = 0x7f, },
+ { .phy_offset = 0, .phy_shift = 8, .rf_addr = 0x44, .rf_shift = 0, .mask = 0xff, },
+ { .phy_offset = 1, .phy_shift = 0, .rf_addr = 0x4a, .rf_shift = 0, .mask = 0xff, },
+ { .phy_offset = 0, .phy_shift = 4, .rf_addr = 0x4d, .rf_shift = 0, .mask = 0xff, },
+ { .phy_offset = 1, .phy_shift = 4, .rf_addr = 0x4e, .rf_shift = 0, .mask = 0xff, },
+ { .phy_offset = 0, .phy_shift = 12, .rf_addr = 0x4f, .rf_shift = 0, .mask = 0x0f, },
+ { .phy_offset = 1, .phy_shift = 0, .rf_addr = 0x4f, .rf_shift = 4, .mask = 0x0f, },
+ { .phy_offset = 3, .phy_shift = 0, .rf_addr = 0x49, .rf_shift = 0, .mask = 0x0f, },
+ { .phy_offset = 4, .phy_shift = 3, .rf_addr = 0x46, .rf_shift = 4, .mask = 0x07, },
+ { .phy_offset = 3, .phy_shift = 15, .rf_addr = 0x46, .rf_shift = 0, .mask = 0x01, },
+ { .phy_offset = 4, .phy_shift = 0, .rf_addr = 0x46, .rf_shift = 1, .mask = 0x07, },
+ { .phy_offset = 3, .phy_shift = 8, .rf_addr = 0x48, .rf_shift = 4, .mask = 0x07, },
+ { .phy_offset = 3, .phy_shift = 11, .rf_addr = 0x48, .rf_shift = 0, .mask = 0x0f, },
+ { .phy_offset = 3, .phy_shift = 4, .rf_addr = 0x49, .rf_shift = 4, .mask = 0x0f, },
+ { .phy_offset = 2, .phy_shift = 15, .rf_addr = 0x45, .rf_shift = 0, .mask = 0x01, },
+ { .phy_offset = 5, .phy_shift = 13, .rf_addr = 0x52, .rf_shift = 4, .mask = 0x07, },
+ { .phy_offset = 6, .phy_shift = 0, .rf_addr = 0x52, .rf_shift = 7, .mask = 0x01, },
+ { .phy_offset = 5, .phy_shift = 3, .rf_addr = 0x41, .rf_shift = 5, .mask = 0x07, },
+ { .phy_offset = 5, .phy_shift = 6, .rf_addr = 0x41, .rf_shift = 0, .mask = 0x0f, },
+ { .phy_offset = 5, .phy_shift = 10, .rf_addr = 0x42, .rf_shift = 5, .mask = 0x07, },
+ { .phy_offset = 4, .phy_shift = 15, .rf_addr = 0x42, .rf_shift = 0, .mask = 0x01, },
+ { .phy_offset = 5, .phy_shift = 0, .rf_addr = 0x42, .rf_shift = 1, .mask = 0x07, },
+ { .phy_offset = 4, .phy_shift = 11, .rf_addr = 0x43, .rf_shift = 4, .mask = 0x0f, },
+ { .phy_offset = 4, .phy_shift = 7, .rf_addr = 0x43, .rf_shift = 0, .mask = 0x0f, },
+ { .phy_offset = 4, .phy_shift = 6, .rf_addr = 0x45, .rf_shift = 1, .mask = 0x01, },
+ { .phy_offset = 2, .phy_shift = 7, .rf_addr = 0x40, .rf_shift = 4, .mask = 0x0f, },
+ { .phy_offset = 2, .phy_shift = 11, .rf_addr = 0x40, .rf_shift = 0, .mask = 0x0f, },
+};
+
static void lpphy_sync_stx(struct b43_wldev *dev)
{
- //TODO
+ const struct lpphy_stx_table_entry *e;
+ unsigned int i;
+ u16 tmp;
+
+ for (i = 0; i < ARRAY_SIZE(lpphy_stx_table); i++) {
+ e = &lpphy_stx_table[i];
+ tmp = b43_radio_read(dev, e->rf_addr);
+ tmp >>= e->rf_shift;
+ tmp <<= e->phy_shift;
+ b43_phy_maskset(dev, B43_PHY_OFDM(0xF2 + e->phy_offset),
+ e->mask << e->phy_shift, tmp);
+ }
}
static void lpphy_radio_init(struct b43_wldev *dev)
@@ -366,7 +417,9 @@ static void lpphy_radio_init(struct b43_wldev *dev)
lpphy_sync_stx(dev);
b43_phy_write(dev, B43_PHY_OFDM(0xF0), 0x5F80);
b43_phy_write(dev, B43_PHY_OFDM(0xF1), 0);
- //TODO Do something on the backplane
+ if (dev->dev->bus->chip_id == 0x4325) {
+ // TODO SSB PMU recalibration
+ }
}
}
--
1.6.2.4
next reply other threads:[~2009-08-09 18:15 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-09 18:15 Gábor Stefanik [this message]
2009-08-09 18:17 ` [PATCH] b43: LP-PHY: Implement STX synchronization Michael Buesch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A7F122D.3010803@gmail.com \
--to=netrolller.3d@gmail.com \
--cc=Larry.Finger@lwfinger.net \
--cc=bcm43xx-dev@lists.berlios.de \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=mb@bu3sch.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.