From: Tim Blechmann <tim@klingt.org>
To: alsa-devel@alsa-project.org
Subject: [PATCH] alsa: hdsp - allow proc reporting with disconnected io box
Date: Wed, 12 Aug 2009 13:00:13 +0200 [thread overview]
Message-ID: <4A82A0BD.9060700@klingt.org> (raw)
[-- Attachment #1.1.1: Type: text/plain, Size: 391 bytes --]
the hdsp driver refuses to report any information via the proc
interface, if the io box is not connected. with this patch, the
content of the control and status registers is printed before the
iobox check.
Signed-off-by: Tim Blechmann <tim@klingt.org>
---
sound/pci/rme9652/hdsp.c | 37 ++++++++++++++++++++-----------------
1 files changed, 20 insertions(+), 17 deletions(-)
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1.1.2: 0001-alsa-hdsp-allow-proc-reporting-with-disconnected-io-.patch --]
[-- Type: text/x-patch; name="0001-alsa-hdsp-allow-proc-reporting-with-disconnected-io-.patch", Size: 3067 bytes --]
diff --git a/sound/pci/rme9652/hdsp.c b/sound/pci/rme9652/hdsp.c
index 3362065..e5b77b8 100644
--- a/sound/pci/rme9652/hdsp.c
+++ b/sound/pci/rme9652/hdsp.c
@@ -3357,17 +3357,33 @@ snd_hdsp_proc_read(struct snd_info_entry *entry, struct snd_info_buffer *buffer)
char *clock_source;
int x;
+ status = hdsp_read(hdsp, HDSP_statusRegister);
+ status2 = hdsp_read(hdsp, HDSP_status2Register);
+ snd_iprintf(buffer, "%s (Card #%d)\n", hdsp->card_name,
+ hdsp->card->number + 1);
+ snd_iprintf(buffer, "Buffers: capture %p playback %p\n",
+ hdsp->capture_buffer, hdsp->playback_buffer);
+ snd_iprintf(buffer, "IRQ: %d Registers bus: 0x%lx VM: 0x%lx\n",
+ hdsp->irq, hdsp->port, (unsigned long)hdsp->iobase);
+ snd_iprintf(buffer, "Control register: 0x%x\n", hdsp->control_register);
+ snd_iprintf(buffer, "Control2 register: 0x%x\n",
+ hdsp->control2_register);
+ snd_iprintf(buffer, "Status register: 0x%x\n", status);
+ snd_iprintf(buffer, "Status2 register: 0x%x\n", status2);
- if (hdsp_check_for_iobox (hdsp)) {
- snd_iprintf(buffer, "No I/O box connected.\nPlease connect one and upload firmware.\n");
+ if (hdsp_check_for_iobox(hdsp)) {
+ snd_iprintf(buffer, "No I/O box connected.\n"
+ "Please connect one and upload firmware.\n");
return;
- }
+ }
if (hdsp_check_for_firmware(hdsp, 0)) {
if (hdsp->state & HDSP_FirmwareCached) {
if (snd_hdsp_load_firmware_from_cache(hdsp) != 0) {
- snd_iprintf(buffer, "Firmware loading from cache failed, please upload manually.\n");
+ snd_iprintf(buffer, "Firmware loading from "
+ "cache failed, "
+ "please upload manually.\n");
return;
}
} else {
@@ -3384,18 +3400,6 @@ snd_hdsp_proc_read(struct snd_info_entry *entry, struct snd_info_buffer *buffer)
}
}
- status = hdsp_read(hdsp, HDSP_statusRegister);
- status2 = hdsp_read(hdsp, HDSP_status2Register);
-
- snd_iprintf(buffer, "%s (Card #%d)\n", hdsp->card_name, hdsp->card->number + 1);
- snd_iprintf(buffer, "Buffers: capture %p playback %p\n",
- hdsp->capture_buffer, hdsp->playback_buffer);
- snd_iprintf(buffer, "IRQ: %d Registers bus: 0x%lx VM: 0x%lx\n",
- hdsp->irq, hdsp->port, (unsigned long)hdsp->iobase);
- snd_iprintf(buffer, "Control register: 0x%x\n", hdsp->control_register);
- snd_iprintf(buffer, "Control2 register: 0x%x\n", hdsp->control2_register);
- snd_iprintf(buffer, "Status register: 0x%x\n", status);
- snd_iprintf(buffer, "Status2 register: 0x%x\n", status2);
snd_iprintf(buffer, "FIFO status: %d\n", hdsp_read(hdsp, HDSP_fifoStatus) & 0xff);
snd_iprintf(buffer, "MIDI1 Output status: 0x%x\n", hdsp_read(hdsp, HDSP_midiStatusOut0));
snd_iprintf(buffer, "MIDI1 Input status: 0x%x\n", hdsp_read(hdsp, HDSP_midiStatusIn0));
@@ -3416,7 +3420,6 @@ snd_hdsp_proc_read(struct snd_info_entry *entry, struct snd_info_buffer *buffer)
snd_iprintf(buffer, "\n");
-
switch (hdsp_clock_source(hdsp)) {
case HDSP_CLOCK_SOURCE_AUTOSYNC:
clock_source = "AutoSync";
[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
[-- Attachment #2: Type: text/plain, Size: 160 bytes --]
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
next reply other threads:[~2009-08-12 11:00 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-12 11:00 Tim Blechmann [this message]
2009-08-12 15:49 ` [PATCH] alsa: hdsp - allow proc reporting with disconnected io box Takashi Iwai
2009-08-12 16:12 ` [PATCH v2] " Tim Blechmann
2009-08-12 16:26 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A82A0BD.9060700@klingt.org \
--to=tim@klingt.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.