From: Johannes Buchner <buchner.johannes@gmx.at>
To: openembedded-devel@lists.openembedded.org
Subject: [PATCH] hx2750 compile errors
Date: Wed, 12 Aug 2009 17:26:44 +0200 [thread overview]
Message-ID: <4A82DF34.7050408@gmx.at> (raw)
[-- Attachment #1: Type: text/plain, Size: 4834 bytes --]
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi.
I noticed the linux-rp-2.6.23 on angstrom (MACHINE=hx2000) doesn't
compile on stable/2009 because of errors in the hx2750 code (probably
was not updated).
The attached patch makes it compile again. Not tested yet, might not
have full pm functionality (if it ever had).
Cheers,
Johannes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2 (MingW32)
iD8DBQFKgt8y7X1+MfqVcr0RAvvaAKCROYtxVIS4ypC/nQ3s2vpDLgA0KwCeO4Er
p/KH4Gu9dm5jQ7qMNrEVv58=
=tN91
-----END PGP SIGNATURE-----
From ef0a00966367a5d5fcda5c468dabb0a62c510c41 Mon Sep 17 00:00:00 2001
From: user <user@oebuild.localdomain>
Date: Wed, 12 Aug 2009 10:55:30 -0400
Subject: [PATCH] made hx2750 compile again
note that the hx2750_pm_ops struct now is quite crippled, I don't really
know where all the functionality went.
---
recipes/linux/linux-rp-2.6.23/hx2750-make.patch | 77 +++++++++++++++++++++++
recipes/linux/linux-rp_2.6.23.bb | 1 +
2 files changed, 78 insertions(+), 0 deletions(-)
create mode 100755 recipes/linux/linux-rp-2.6.23/hx2750-make.patch
diff --git a/recipes/linux/linux-rp-2.6.23/hx2750-make.patch b/recipes/linux/linux-rp-2.6.23/hx2750-make.patch
new file mode 100755
index 0000000..c40d725
--- /dev/null
+++ b/recipes/linux/linux-rp-2.6.23/hx2750-make.patch
@@ -0,0 +1,77 @@
+Index: linux-2.6.23/arch/arm/mach-pxa/hx2750.c
+===================================================================
+--- linux-2.6.23.orig/arch/arm/mach-pxa/hx2750.c 2009-08-12 10:37:26.000000000 -0400
++++ linux-2.6.23/arch/arm/mach-pxa/hx2750.c 2009-08-12 10:38:53.000000000 -0400
+@@ -443,7 +443,7 @@
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+- .init_irq = pxa_init_irq,
++ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = hx2750_init,
+ MACHINE_END
+Index: linux-2.6.23/arch/arm/mach-pxa/hx2750_test.c
+===================================================================
+--- linux-2.6.23.orig/arch/arm/mach-pxa/hx2750_test.c 2009-08-12 10:37:26.000000000 -0400
++++ linux-2.6.23/arch/arm/mach-pxa/hx2750_test.c 2009-08-12 10:40:35.000000000 -0400
+@@ -203,14 +203,15 @@
+
+ static DEVICE_ATTR(ssp2write, 0200, NULL, ssp2write_store);
+
+-+static ssize_t sspr_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
++static ssize_t sspr_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+ {
+- unsigned long val,ret;
++ unsigned long val;
++ int ret;
+ val = simple_strtoul(buf, NULL, 0);
+
+ hx2750_tsc2101_send(1<<15,val,&ret,1);
+
+- printk("Response: %lx\n",ret);
++ printk("Response: %x\n",ret);
+
+ return count;
+ }
+@@ -219,8 +220,9 @@
+
+ static ssize_t sspw_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+ {
+- unsigned long val,ret;
+- sscanf(buf, "%lx %lx", &val, &ret);
++ unsigned long val;
++ int ret;
++ sscanf(buf, "%lx %x", &val, &ret);
+
+ hx2750_tsc2101_send(0,val,&ret,1);
+
+@@ -336,10 +338,10 @@
+ }
+
+ static struct pm_ops hx2750_pm_ops = {
+- .pm_disk_mode = PM_DISK_FIRMWARE,
+- .prepare = pxa_pm_prepare,
++ /* .pm_disk_mode = PM_DISK_FIRMWARE, ** not sure why this element doesn't exist anymore and what replaced it ** */
++ /* .prepare = pxa_pm_prepare, */
+ .enter = hx2750_pxa_pm_enter,
+- .finish = pxa_pm_finish,
++ /* .finish = pxa_pm_finish, */
+ };
+
+
+Index: linux-2.6.23/include/asm/arch/hx2750.h
+===================================================================
+--- linux-2.6.23.orig/include/asm/arch/hx2750.h 2009-08-12 10:42:15.000000000 -0400
++++ linux-2.6.23/include/asm/arch/hx2750.h 2009-08-12 10:42:24.000000000 -0400
+@@ -85,6 +85,10 @@
+ void hx2750_set_egpio(unsigned int gpio);
+ void hx2750_clear_egpio(unsigned int gpio);
+
++/* for _test.c */
++void hx2750_ssp_init2(void);
++void hx2750_tsc2101_send(int read, int command, int *values, int numval);
++
+
+ #endif /* __ASM_ARCH_HX2750_H */
+
diff --git a/recipes/linux/linux-rp_2.6.23.bb b/recipes/linux/linux-rp_2.6.23.bb
index 460ac53..e45006a 100644
--- a/recipes/linux/linux-rp_2.6.23.bb
+++ b/recipes/linux/linux-rp_2.6.23.bb
@@ -28,6 +28,7 @@ SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-2.6.23.tar.bz2 \
${RPSRC}/hx2750_base-r29.patch;patch=1 \
${RPSRC}/hx2750_bl-r9.patch;patch=1 \
${RPSRC}/hx2750_pcmcia-r2.patch;patch=1 \
+ ${RPSRC}/hx2750_make.patch;patch=1 \
${RPSRC}/pxa_keys-r7.patch;patch=1 \
${RPSRC}/tsc2101-r16.patch;patch=1 \
${RPSRC}/hx2750_test1-r7.patch;patch=1 \
--
1.6.0.4
next reply other threads:[~2009-08-12 5:36 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-12 15:26 Johannes Buchner [this message]
2009-08-12 8:07 ` [PATCH] hx2750 compile errors Henning Heinold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A82DF34.7050408@gmx.at \
--to=buchner.johannes@gmx.at \
--cc=openembedded-devel@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.