From: "Gábor Stefanik" <netrolller.3d@gmail.com>
To: John Linville <linville@tuxdriver.com>,
Michael Buesch <mb@bu3sch.de>,
Larry Finger <Larry.Finger@lwfinger.net>
Cc: Broadcom Wireless <bcm43xx-dev@lists.berlios.de>,
linux-wireless <linux-wireless@vger.kernel.org>
Subject: [PATCH] b43: LP-PHY: Implement channel switching for rev0/1/B2062 radio
Date: Fri, 14 Aug 2009 00:15:17 +0200 [thread overview]
Message-ID: <4A849075.7000000@gmail.com> (raw)
-Move pdiv from lpphy_2062_init to struct b43_phy_lp.
-Add channel table for the B2062 radio.
-Add code for tuning the B2062 radio to channel.
-Add error handling to op_switch_channel, and use it for both radios.
Rev0/1/B2062 will now hopefully show some signs of life, though
it won't work at full performance, as calibration is still missing.
Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com>
---
Larry, this one is for your PHY/radio revision! :-)
drivers/net/wireless/b43/phy_lp.c | 297 +++++++++++++++++++++++++++++++++++--
drivers/net/wireless/b43/phy_lp.h | 2 +
2 files changed, 284 insertions(+), 15 deletions(-)
diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c
index 992e250..cc27941 100644
--- a/drivers/net/wireless/b43/phy_lp.c
+++ b/drivers/net/wireless/b43/phy_lp.c
@@ -455,8 +455,9 @@ struct b2062_freqdata {
/* Initialize the 2062 radio. */
static void lpphy_2062_init(struct b43_wldev *dev)
{
+ struct b43_phy_lp *lpphy = dev->phy.lp;
struct ssb_bus *bus = dev->dev->bus;
- u32 crystalfreq, pdiv, tmp, ref;
+ u32 crystalfreq, tmp, ref;
unsigned int i;
const struct b2062_freqdata *fd = NULL;
@@ -496,22 +497,24 @@ static void lpphy_2062_init(struct b43_wldev *dev)
B43_WARN_ON(crystalfreq == 0);
if (crystalfreq >= 30000000) {
- pdiv = 1;
+ lpphy->pdiv = 1;
b43_radio_mask(dev, B2062_S_RFPLL_CTL1, 0xFFFB);
} else {
- pdiv = 2;
+ lpphy->pdiv = 2;
b43_radio_set(dev, B2062_S_RFPLL_CTL1, 0x4);
}
- tmp = (800000000 * pdiv + crystalfreq) / (32000000 * pdiv);
+ tmp = (800000000 * lpphy->pdiv + crystalfreq) /
+ (32000000 * lpphy->pdiv);
tmp = (tmp - 1) & 0xFF;
b43_radio_write(dev, B2062_S_RFPLL_CTL18, tmp);
- tmp = (2 * crystalfreq + 1000000 * pdiv) / (2000000 * pdiv);
+ tmp = (2 * crystalfreq + 1000000 * lpphy->pdiv) /
+ (2000000 * lpphy->pdiv);
tmp = ((tmp & 0xFF) - 1) & 0xFFFF;
b43_radio_write(dev, B2062_S_RFPLL_CTL19, tmp);
- ref = (1000 * pdiv + 2 * crystalfreq) / (2000 * pdiv);
+ ref = (1000 * lpphy->pdiv + 2 * crystalfreq) / (2000 * lpphy->pdiv);
ref &= 0xFFFF;
for (i = 0; i < ARRAY_SIZE(freqdata_tab); i++) {
if (ref < freqdata_tab[i].freq) {
@@ -1431,6 +1434,162 @@ struct b206x_channel {
u8 data[12];
};
+static const struct b206x_channel b2062_chantbl[] = {
+ { .channel = 1, .freq = 2412, .data[0] = 0xFF, .data[1] = 0xFF,
+ .data[2] = 0xB5, .data[3] = 0x1B, .data[4] = 0x24, .data[5] = 0x32,
+ .data[6] = 0x32, .data[7] = 0x88, .data[8] = 0x88, },
+ { .channel = 2, .freq = 2417, .data[0] = 0xFF, .data[1] = 0xFF,
+ .data[2] = 0xB5, .data[3] = 0x1B, .data[4] = 0x24, .data[5] = 0x32,
+ .data[6] = 0x32, .data[7] = 0x88, .data[8] = 0x88, },
+ { .channel = 3, .freq = 2422, .data[0] = 0xFF, .data[1] = 0xFF,
+ .data[2] = 0xB5, .data[3] = 0x1B, .data[4] = 0x24, .data[5] = 0x32,
+ .data[6] = 0x32, .data[7] = 0x88, .data[8] = 0x88, },
+ { .channel = 4, .freq = 2427, .data[0] = 0xFF, .data[1] = 0xFF,
+ .data[2] = 0xB5, .data[3] = 0x1B, .data[4] = 0x24, .data[5] = 0x32,
+ .data[6] = 0x32, .data[7] = 0x88, .data[8] = 0x88, },
+ { .channel = 5, .freq = 2432, .data[0] = 0xFF, .data[1] = 0xFF,
+ .data[2] = 0xB5, .data[3] = 0x1B, .data[4] = 0x24, .data[5] = 0x32,
+ .data[6] = 0x32, .data[7] = 0x88, .data[8] = 0x88, },
+ { .channel = 6, .freq = 2437, .data[0] = 0xFF, .data[1] = 0xFF,
+ .data[2] = 0xB5, .data[3] = 0x1B, .data[4] = 0x24, .data[5] = 0x32,
+ .data[6] = 0x32, .data[7] = 0x88, .data[8] = 0x88, },
+ { .channel = 7, .freq = 2442, .data[0] = 0xFF, .data[1] = 0xFF,
+ .data[2] = 0xB5, .data[3] = 0x1B, .data[4] = 0x24, .data[5] = 0x32,
+ .data[6] = 0x32, .data[7] = 0x88, .data[8] = 0x88, },
+ { .channel = 8, .freq = 2447, .data[0] = 0xFF, .data[1] = 0xFF,
+ .data[2] = 0xB5, .data[3] = 0x1B, .data[4] = 0x24, .data[5] = 0x32,
+ .data[6] = 0x32, .data[7] = 0x88, .data[8] = 0x88, },
+ { .channel = 9, .freq = 2452, .data[0] = 0xFF, .data[1] = 0xFF,
+ .data[2] = 0xB5, .data[3] = 0x1B, .data[4] = 0x24, .data[5] = 0x32,
+ .data[6] = 0x32, .data[7] = 0x88, .data[8] = 0x88, },
+ { .channel = 10, .freq = 2457, .data[0] = 0xFF, .data[1] = 0xFF,
+ .data[2] = 0xB5, .data[3] = 0x1B, .data[4] = 0x24, .data[5] = 0x32,
+ .data[6] = 0x32, .data[7] = 0x88, .data[8] = 0x88, },
+ { .channel = 11, .freq = 2462, .data[0] = 0xFF, .data[1] = 0xFF,
+ .data[2] = 0xB5, .data[3] = 0x1B, .data[4] = 0x24, .data[5] = 0x32,
+ .data[6] = 0x32, .data[7] = 0x88, .data[8] = 0x88, },
+ { .channel = 12, .freq = 2467, .data[0] = 0xFF, .data[1] = 0xFF,
+ .data[2] = 0xB5, .data[3] = 0x1B, .data[4] = 0x24, .data[5] = 0x32,
+ .data[6] = 0x32, .data[7] = 0x88, .data[8] = 0x88, },
+ { .channel = 13, .freq = 2472, .data[0] = 0xFF, .data[1] = 0xFF,
+ .data[2] = 0xB5, .data[3] = 0x1B, .data[4] = 0x24, .data[5] = 0x32,
+ .data[6] = 0x32, .data[7] = 0x88, .data[8] = 0x88, },
+ { .channel = 14, .freq = 2484, .data[0] = 0xFF, .data[1] = 0xFF,
+ .data[2] = 0xB5, .data[3] = 0x1B, .data[4] = 0x24, .data[5] = 0x32,
+ .data[6] = 0x32, .data[7] = 0x88, .data[8] = 0x88, },
+ { .channel = 34, .freq = 5170, .data[0] = 0x00, .data[1] = 0x22,
+ .data[2] = 0x20, .data[3] = 0x84, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x35, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 38, .freq = 5190, .data[0] = 0x00, .data[1] = 0x11,
+ .data[2] = 0x10, .data[3] = 0x83, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x35, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 42, .freq = 5210, .data[0] = 0x00, .data[1] = 0x11,
+ .data[2] = 0x10, .data[3] = 0x83, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x35, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 46, .freq = 5230, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x83, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x35, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 36, .freq = 5180, .data[0] = 0x00, .data[1] = 0x11,
+ .data[2] = 0x20, .data[3] = 0x83, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x35, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 40, .freq = 5200, .data[0] = 0x00, .data[1] = 0x11,
+ .data[2] = 0x10, .data[3] = 0x84, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x35, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 44, .freq = 5220, .data[0] = 0x00, .data[1] = 0x11,
+ .data[2] = 0x00, .data[3] = 0x83, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x35, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 48, .freq = 5240, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x83, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x35, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 52, .freq = 5260, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x83, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x35, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 56, .freq = 5280, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x83, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x35, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 60, .freq = 5300, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x63, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x35, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 64, .freq = 5320, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x62, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x35, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 100, .freq = 5500, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x30, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x37, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 104, .freq = 5520, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x20, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x37, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 108, .freq = 5540, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x20, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x37, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 112, .freq = 5560, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x20, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x37, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 116, .freq = 5580, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x10, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x37, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 120, .freq = 5600, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x00, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x37, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 124, .freq = 5620, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x00, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x37, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 128, .freq = 5640, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x00, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x37, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 132, .freq = 5660, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x00, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x37, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 136, .freq = 5680, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x00, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x37, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 140, .freq = 5700, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x00, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x37, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 149, .freq = 5745, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x00, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x37, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 153, .freq = 5765, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x00, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x37, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 157, .freq = 5785, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x00, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x37, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 161, .freq = 5805, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x00, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x37, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 165, .freq = 5825, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x00, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x37, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 184, .freq = 4920, .data[0] = 0x55, .data[1] = 0x77,
+ .data[2] = 0x90, .data[3] = 0xF7, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x35, .data[7] = 0xFF, .data[8] = 0xFF, },
+ { .channel = 188, .freq = 4940, .data[0] = 0x44, .data[1] = 0x77,
+ .data[2] = 0x80, .data[3] = 0xE7, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x35, .data[7] = 0xFF, .data[8] = 0xFF, },
+ { .channel = 192, .freq = 4960, .data[0] = 0x44, .data[1] = 0x66,
+ .data[2] = 0x80, .data[3] = 0xE7, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x35, .data[7] = 0xFF, .data[8] = 0xFF, },
+ { .channel = 196, .freq = 4980, .data[0] = 0x33, .data[1] = 0x66,
+ .data[2] = 0x70, .data[3] = 0xC7, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x35, .data[7] = 0xFF, .data[8] = 0xFF, },
+ { .channel = 200, .freq = 5000, .data[0] = 0x22, .data[1] = 0x55,
+ .data[2] = 0x60, .data[3] = 0xD7, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x35, .data[7] = 0xFF, .data[8] = 0xFF, },
+ { .channel = 204, .freq = 5020, .data[0] = 0x22, .data[1] = 0x55,
+ .data[2] = 0x60, .data[3] = 0xC7, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x35, .data[7] = 0xFF, .data[8] = 0xFF, },
+ { .channel = 208, .freq = 5040, .data[0] = 0x22, .data[1] = 0x44,
+ .data[2] = 0x50, .data[3] = 0xC7, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x35, .data[7] = 0xFF, .data[8] = 0xFF, },
+ { .channel = 212, .freq = 5060, .data[0] = 0x11, .data[1] = 0x44,
+ .data[2] = 0x50, .data[3] = 0xA5, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x35, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 216, .freq = 5080, .data[0] = 0x00, .data[1] = 0x44,
+ .data[2] = 0x40, .data[3] = 0xB6, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x35, .data[7] = 0xFF, .data[8] = 0x88, },
+};
+
static const struct b206x_channel b2063_chantbl[] = {
{ .channel = 1, .freq = 2412, .data[0] = 0x6F, .data[1] = 0x3C,
.data[2] = 0x3C, .data[3] = 0x04, .data[4] = 0x05, .data[5] = 0x05,
@@ -1638,10 +1797,110 @@ static const struct b206x_channel b2063_chantbl[] = {
.data[10] = 0x40, .data[11] = 0x00, },
};
-static void lpphy_b2062_tune(struct b43_wldev *dev,
- unsigned int channel)
+static void lpphy_b2062_reset_pll_bias(struct b43_wldev *dev)
{
- //TODO
+ struct ssb_bus *bus = dev->dev->bus;
+
+ b43_radio_write(dev, B2062_S_RFPLL_CTL2, 0xFF);
+ udelay(20);
+ if (bus->chip_id == 0x5354) {
+ b43_radio_write(dev, B2062_N_COMM1, 4);
+ b43_radio_write(dev, B2062_S_RFPLL_CTL2, 4);
+ } else {
+ b43_radio_write(dev, B2062_S_RFPLL_CTL2, 0);
+ }
+ udelay(5);
+}
+
+static void lpphy_b2062_vco_calib(struct b43_wldev *dev)
+{
+ b43_phy_write(dev, B2062_S_RFPLL_CTL21, 0x42);
+ b43_phy_write(dev, B2062_S_RFPLL_CTL21, 0x62);
+ udelay(200);
+}
+
+static int lpphy_b2062_tune(struct b43_wldev *dev,
+ unsigned int channel)
+{
+ struct b43_phy_lp *lpphy = dev->phy.lp;
+ struct ssb_bus *bus = dev->dev->bus;
+ static const struct b206x_channel *chandata = NULL;
+ u32 crystal_freq = bus->chipco.pmu.crystalfreq * 1000;
+ u32 tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7, tmp8, tmp9;
+ int i, err = 0;
+
+ for (i = 0; i < ARRAY_SIZE(b2063_chantbl); i++) {
+ if (b2063_chantbl[i].channel == channel) {
+ chandata = &b2063_chantbl[i];
+ break;
+ }
+ }
+
+ if (B43_WARN_ON(!chandata))
+ return -EINVAL;
+
+ b43_radio_set(dev, B2062_S_RFPLL_CTL14, 0x04);
+ b43_radio_write(dev, B2062_N_LGENA_TUNE0, chandata->data[0]);
+ b43_radio_write(dev, B2062_N_LGENA_TUNE2, chandata->data[1]);
+ b43_radio_write(dev, B2062_N_LGENA_TUNE3, chandata->data[2]);
+ b43_radio_write(dev, B2062_N_TX_TUNE, chandata->data[3]);
+ b43_radio_write(dev, B2062_S_LGENG_CTL1, chandata->data[4]);
+ b43_radio_write(dev, B2062_N_LGENA_CTL5, chandata->data[5]);
+ b43_radio_write(dev, B2062_N_LGENA_CTL6, chandata->data[6]);
+ b43_radio_write(dev, B2062_N_TX_PGA, chandata->data[7]);
+ b43_radio_write(dev, B2062_N_TX_PAD, chandata->data[8]);
+
+ tmp1 = crystal_freq / 1000;
+ tmp2 = lpphy->pdiv * 1000;
+ b43_radio_write(dev, B2062_S_RFPLL_CTL33, 0xCC);
+ b43_radio_write(dev, B2062_S_RFPLL_CTL34, 0x07);
+ lpphy_b2062_reset_pll_bias(dev);
+ tmp3 = tmp2 * channel2freq_lp(channel);
+ if (channel2freq_lp(channel) < 4000)
+ tmp3 *= 2;
+ tmp4 = 48 * tmp1;
+ tmp6 = tmp3 / tmp4;
+ tmp7 = tmp3 % tmp4;
+ b43_radio_write(dev, B2062_S_RFPLL_CTL26, tmp6);
+ tmp5 = tmp7 * 0x100;
+ tmp6 = tmp5 / tmp4;
+ tmp7 = tmp5 % tmp4;
+ b43_radio_write(dev, B2062_S_RFPLL_CTL28, tmp6);
+ tmp5 = tmp7 * 0x100;
+ tmp6 = tmp5 / tmp4;
+ tmp7 = tmp5 % tmp4;
+ b43_radio_write(dev, B2062_S_RFPLL_CTL29, tmp6 + ((2 * tmp7) / tmp4));
+ tmp8 = b43_phy_read(dev, B2062_S_RFPLL_CTL19);
+ tmp9 = ((2 * tmp3 * (tmp8 + 1)) + (3 * tmp1)) / (6 * tmp1);
+ b43_radio_write(dev, B2062_S_RFPLL_CTL23, tmp9 >> 8);
+ b43_radio_write(dev, B2062_S_RFPLL_CTL24, tmp9 & 0xFF);
+
+ lpphy_b2062_vco_calib(dev);
+ if (b43_radio_read(dev, B2062_S_RFPLL_CTL3) & 0x10) {
+ b43_radio_write(dev, B2062_S_RFPLL_CTL33, 0xFC);
+ b43_radio_write(dev, B2062_S_RFPLL_CTL34, 0);
+ lpphy_b2062_reset_pll_bias(dev);
+ lpphy_b2062_vco_calib(dev);
+ if (b43_radio_read(dev, B2062_S_RFPLL_CTL3) & 0x10)
+ err = -EINVAL;
+ }
+
+ b43_radio_mask(dev, B2062_S_RFPLL_CTL14, ~0x04);
+ return err;
+}
+
+static void lpphy_japan_filter(struct b43_wldev *dev, int channel)
+{
+ struct b43_phy_lp *lpphy = dev->phy.lp;
+ u16 tmp = (channel == 14); //SPEC FIXME check japanwidefilter!
+
+ if (dev->phy.rev < 2) { //SPEC FIXME Isn't this rev0/1-specific?
+ b43_phy_maskset(dev, B43_LPPHY_LP_PHY_CTL, 0xFCFF, tmp << 9);
+ if ((dev->phy.rev == 1) && (lpphy->rc_cap))
+ lpphy_set_rc_cap(dev);
+ } else {
+ b43_radio_write(dev, B2063_TX_BB_SP3, 0x3F);
+ }
}
static void lpphy_b2063_vco_calib(struct b43_wldev *dev)
@@ -1661,8 +1920,8 @@ static void lpphy_b2063_vco_calib(struct b43_wldev *dev)
b43_phy_set(dev, B2063_PLL_SP1, 0x40);
}
-static void lpphy_b2063_tune(struct b43_wldev *dev,
- unsigned int channel)
+static int lpphy_b2063_tune(struct b43_wldev *dev,
+ unsigned int channel)
{
struct ssb_bus *bus = dev->dev->bus;
@@ -1681,7 +1940,7 @@ static void lpphy_b2063_tune(struct b43_wldev *dev,
}
if (B43_WARN_ON(!chandata))
- return;
+ return -EINVAL;
b43_radio_write(dev, B2063_LOGEN_VCOBUF1, chandata->data[0]);
b43_radio_write(dev, B2063_LOGEN_MIXER2, chandata->data[1]);
@@ -1780,18 +2039,26 @@ static void lpphy_b2063_tune(struct b43_wldev *dev,
b43_phy_mask(dev, B2063_PLL_SP2, 0xFFFC);
lpphy_b2063_vco_calib(dev);
b43_radio_write(dev, B2063_COMM15, old_comm15);
+
+ return 0;
}
static int b43_lpphy_op_switch_channel(struct b43_wldev *dev,
unsigned int new_channel)
{
+ int err;
+
b43_write16(dev, B43_MMIO_CHANNEL, new_channel);
if (dev->phy.radio_ver == 0x2063) {
- lpphy_b2063_tune(dev, new_channel);
+ err = lpphy_b2063_tune(dev, new_channel);
+ if (err)
+ return err;
} else {
- lpphy_b2062_tune(dev, new_channel);
- //TODO Japan filter
+ err = lpphy_b2062_tune(dev, new_channel);
+ if (err)
+ return err;
+ lpphy_japan_filter(dev, new_channel);
}
lpphy_adjust_gain_table(dev, channel2freq_lp(new_channel));
diff --git a/drivers/net/wireless/b43/phy_lp.h b/drivers/net/wireless/b43/phy_lp.h
index 4eab760..99cb038 100644
--- a/drivers/net/wireless/b43/phy_lp.h
+++ b/drivers/net/wireless/b43/phy_lp.h
@@ -884,6 +884,8 @@ struct b43_phy_lp {
/* Used for "Save/Restore Dig Filt State" */
u16 dig_flt_state[9];
+
+ unsigned int pdiv;
};
enum tssi_mux_mode {
--
1.6.2.4
next reply other threads:[~2009-08-13 22:15 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-13 22:15 Gábor Stefanik [this message]
2009-08-14 20:16 ` [PATCH] b43: LP-PHY: Implement channel switching for rev0/1/B2062 radio Michael Buesch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A849075.7000000@gmail.com \
--to=netrolller.3d@gmail.com \
--cc=Larry.Finger@lwfinger.net \
--cc=bcm43xx-dev@lists.berlios.de \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=mb@bu3sch.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.