From: Roel Kluin <roel.kluin@gmail.com>
To: David Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org, akpm@linux-foundation.org
Subject: Re: [PATCH] yellowfin: Fix buffer underrun after dev_alloc_skb() failure
Date: Fri, 14 Aug 2009 11:59:14 +0200 [thread overview]
Message-ID: <4A853572.70209@gmail.com> (raw)
In-Reply-To: <20090812.210845.84504668.davem@davemloft.net>
When dev_alloc_skb fails in the first iteration, a buffer underrun occurs.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
---
> I think this is a case where this code is going to need to
> be majorly reworked so that you can pass error status up
> to the caller when this allocation failure happens, and
> the caller can properly act upon it.
>
> Just silently returning when no RX ring has been allocated,
> and the TX ring hasn't been setup at all, is going to be
> worse than the array overrun you're supposedly fixing.
I think it should be something like this. Should yellowfin_open()
do more than just passing the yellowfin_init_ring() error?
diff --git a/drivers/net/yellowfin.c b/drivers/net/yellowfin.c
index a075801..ee35b11 100644
--- a/drivers/net/yellowfin.c
+++ b/drivers/net/yellowfin.c
@@ -346,7 +346,7 @@ static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
static int yellowfin_open(struct net_device *dev);
static void yellowfin_timer(unsigned long data);
static void yellowfin_tx_timeout(struct net_device *dev);
-static void yellowfin_init_ring(struct net_device *dev);
+static int yellowfin_init_ring(struct net_device *dev);
static int yellowfin_start_xmit(struct sk_buff *skb, struct net_device *dev);
static irqreturn_t yellowfin_interrupt(int irq, void *dev_instance);
static int yellowfin_rx(struct net_device *dev);
@@ -573,19 +573,22 @@ static int yellowfin_open(struct net_device *dev)
{
struct yellowfin_private *yp = netdev_priv(dev);
void __iomem *ioaddr = yp->base;
- int i;
+ int i, ret;
/* Reset the chip. */
iowrite32(0x80000000, ioaddr + DMACtrl);
- i = request_irq(dev->irq, &yellowfin_interrupt, IRQF_SHARED, dev->name, dev);
- if (i) return i;
+ ret = request_irq(dev->irq, &yellowfin_interrupt, IRQF_SHARED, dev->name, dev);
+ if (ret)
+ return ret;
if (yellowfin_debug > 1)
printk(KERN_DEBUG "%s: yellowfin_open() irq %d.\n",
dev->name, dev->irq);
- yellowfin_init_ring(dev);
+ ret = yellowfin_init_ring(dev);
+ if (ret)
+ return ret;
iowrite32(yp->rx_ring_dma, ioaddr + RxPtr);
iowrite32(yp->tx_ring_dma, ioaddr + TxPtr);
@@ -725,10 +728,10 @@ static void yellowfin_tx_timeout(struct net_device *dev)
}
/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
-static void yellowfin_init_ring(struct net_device *dev)
+static int yellowfin_init_ring(struct net_device *dev)
{
struct yellowfin_private *yp = netdev_priv(dev);
- int i;
+ int i, j;
yp->tx_full = 0;
yp->cur_rx = yp->cur_tx = 0;
@@ -753,6 +756,11 @@ static void yellowfin_init_ring(struct net_device *dev)
yp->rx_ring[i].addr = cpu_to_le32(pci_map_single(yp->pci_dev,
skb->data, yp->rx_buf_sz, PCI_DMA_FROMDEVICE));
}
+ if (i != RX_RING_SIZE) {
+ for (j = 0; j < i; j++)
+ dev_kfree_skb(yp->rx_skbuff[j]);
+ return -ENOMEM;
+ }
yp->rx_ring[i-1].dbdma_cmd = cpu_to_le32(CMD_STOP);
yp->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
@@ -769,8 +777,6 @@ static void yellowfin_init_ring(struct net_device *dev)
yp->tx_ring[--i].dbdma_cmd = cpu_to_le32(CMD_STOP | BRANCH_ALWAYS);
#else
{
- int j;
-
/* Tx ring needs a pair of descriptors, the second for the status. */
for (i = 0; i < TX_RING_SIZE; i++) {
j = 2*i;
@@ -805,7 +811,7 @@ static void yellowfin_init_ring(struct net_device *dev)
}
#endif
yp->tx_tail_desc = &yp->tx_status[0];
- return;
+ return 0;
}
static int yellowfin_start_xmit(struct sk_buff *skb, struct net_device *dev)
next prev parent reply other threads:[~2009-08-14 9:55 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-07 17:57 [PATCH] yellowfin: Fix buffer underrun after dev_alloc_skb() failure Roel Kluin
2009-08-13 4:08 ` David Miller
2009-08-14 9:59 ` Roel Kluin [this message]
2009-08-14 23:17 ` David Miller
2009-08-18 8:50 ` Roel Kluin
2009-08-19 3:21 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A853572.70209@gmail.com \
--to=roel.kluin@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.