All of lore.kernel.org
 help / color / mirror / Atom feed
From: Wan ZongShun <mcuos.com@gmail.com>
To: Wim Van Sebroeck <wim@iguana.be>
Cc: linux-arm-kernel <linux-arm-kernel@lists.arm.linux.org.uk>,
	linux-kernel <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2] Add watchdog driver for w90p910
Date: Mon, 17 Aug 2009 18:00:01 +0800	[thread overview]
Message-ID: <4A892A21.2010503@gmail.com> (raw)
In-Reply-To: <20090817091458.GR4302@infomag.iguana.be>

[-- Attachment #1: Type: text/plain, Size: 448 bytes --]

Dear Wim,

Wim Van Sebroeck:
> Hi Wan,
> 
>> At the same time, I renamed this driver name, due to I
>> have changed the corresponding device name in my arch file.
> 
> Isn't it best to rename the driver in drivers/watchdog also to nuc900_wdt.c ?

The attached file is my fix patch relative to w90p910-v2.diff.
Also, I renamed all w90p910 to nuc900, Due to it applies to all
Nuc9xx series SoCs.

Thanks a lot for your help.

> Thanks,
> Wim.
> 
> 


[-- Attachment #2: 0002-fix-again-wim-driver.patch --]
[-- Type: text/x-patch, Size: 19729 bytes --]

fix watchdog driver for w90p910 platform.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>

---
 drivers/watchdog/Kconfig       |    8 +-
 drivers/watchdog/Makefile      |    2 +-
 drivers/watchdog/nuc900_wdt.c  |  353 ++++++++++++++++++++++++++++++++++++++++
 drivers/watchdog/w90p910_wdt.c |  353 ----------------------------------------
 4 files changed, 358 insertions(+), 358 deletions(-)
 create mode 100644 drivers/watchdog/nuc900_wdt.c
 delete mode 100644 drivers/watchdog/w90p910_wdt.c

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index fba4b91..352b658 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -266,14 +266,14 @@ config STMP3XXX_WATCHDOG
 	  To compile this driver as a module, choose M here: the
 	  module will be called stmp3xxx_wdt.
 
-config W90P910_WATCHDOG
-	tristate "Nuvoton W90P910 watchdog"
+config NUC900_WATCHDOG
+	tristate "Nuvoton NUC900 watchdog"
 	depends on ARCH_W90X900
 	help
 	  Say Y here if to include support for the watchdog timer
-	  for the Nuvoton W90P910 SoC.
+	  for the Nuvoton NUC900 series SoCs.
 	  To compile this driver as a module, choose M here: the
-	  module will be called w90p910_wdt.
+	  module will be called nuc900_wdt.
 
 # AVR32 Architecture
 
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index ecc05b4..ecad9fa 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -44,7 +44,7 @@ obj-$(CONFIG_DAVINCI_WATCHDOG) += davinci_wdt.o
 obj-$(CONFIG_ORION_WATCHDOG) += orion_wdt.o
 obj-$(CONFIG_COH901327_WATCHDOG) += coh901327_wdt.o
 obj-$(CONFIG_STMP3XXX_WATCHDOG) += stmp3xxx_wdt.o
-obj-$(CONFIG_W90P910_WATCHDOG) += w90p910_wdt.o
+obj-$(CONFIG_NUC900_WATCHDOG) += nuc900_wdt.o
 
 # AVR32 Architecture
 obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
diff --git a/drivers/watchdog/nuc900_wdt.c b/drivers/watchdog/nuc900_wdt.c
new file mode 100644
index 0000000..adefe3a
--- /dev/null
+++ b/drivers/watchdog/nuc900_wdt.c
@@ -0,0 +1,353 @@
+/*
+ * Copyright (c) 2009 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/bitops.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/types.h>
+#include <linux/watchdog.h>
+#include <linux/uaccess.h>
+
+#define REG_WTCR		0x1c
+#define WTCLK			(0x01 << 10)
+#define WTE			(0x01 << 7)	/*wdt enable*/
+#define WTIS			(0x03 << 4)
+#define WTIF			(0x01 << 3)
+#define WTRF			(0x01 << 2)
+#define WTRE			(0x01 << 1)
+#define WTR			(0x01 << 0)
+/*
+ * The watchdog time interval can be calculated via following formula:
+ * WTIS		real time interval (formula)
+ * 0x00		((2^ 14 ) * ((external crystal freq) / 256))seconds
+ * 0x01		((2^ 16 ) * ((external crystal freq) / 256))seconds
+ * 0x02		((2^ 18 ) * ((external crystal freq) / 256))seconds
+ * 0x03		((2^ 20 ) * ((external crystal freq) / 256))seconds
+ *
+ * The external crystal freq is 15Mhz in the nuc900 evaluation board.
+ * So 0x00 = +-0.28 seconds, 0x01 = +-1.12 seconds, 0x02 = +-4.48 seconds,
+ * 0x03 = +- 16.92 seconds..
+ */
+#define WDT_HW_TIMEOUT		0x02
+#define WDT_TIMEOUT		(HZ/2)
+#define WDT_HEARTBEAT		15
+
+static int heartbeat = WDT_HEARTBEAT;
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat, "Watchdog heartbeats in seconds. "
+	"(default = " __MODULE_STRING(WDT_HEARTBEAT) ")");
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
+	"(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+struct nuc900_wdt {
+	struct resource  *res;
+	struct clk	 *wdt_clock;
+	struct platform_device *pdev;
+	void __iomem	 *wdt_base;
+	char		 expect_close;
+	struct timer_list timer;
+	spinlock_t       wdt_lock;
+	unsigned long next_heartbeat;
+};
+
+static unsigned long nuc900wdt_busy;
+struct nuc900_wdt *nuc900_wdt;
+
+static inline void nuc900_wdt_keepalive(void)
+{
+	unsigned int val;
+
+	spin_lock(&nuc900_wdt->wdt_lock);
+
+	val = __raw_readl(nuc900_wdt->wdt_base + REG_WTCR);
+	val |= (WTR | WTIF);
+	__raw_writel(val, nuc900_wdt->wdt_base + REG_WTCR);
+
+	spin_unlock(&nuc900_wdt->wdt_lock);
+}
+
+static inline void nuc900_wdt_start(void)
+{
+	unsigned int val;
+
+	spin_lock(&nuc900_wdt->wdt_lock);
+
+	val = __raw_readl(nuc900_wdt->wdt_base + REG_WTCR);
+	val |= (WTRE | WTE | WTR | WTCLK | WTIF);
+	val &= ~WTIS;
+	val |= (WDT_HW_TIMEOUT << 0x04);
+	__raw_writel(val, nuc900_wdt->wdt_base + REG_WTCR);
+
+	spin_unlock(&nuc900_wdt->wdt_lock);
+
+	nuc900_wdt->next_heartbeat = jiffies + heartbeat * HZ;
+	mod_timer(&nuc900_wdt->timer, jiffies + WDT_TIMEOUT);
+}
+
+static inline void nuc900_wdt_stop(void)
+{
+	unsigned int val;
+
+	del_timer(&nuc900_wdt->timer);
+
+	spin_lock(&nuc900_wdt->wdt_lock);
+
+	val = __raw_readl(nuc900_wdt->wdt_base + REG_WTCR);
+	val &= ~WTE;
+	__raw_writel(val, nuc900_wdt->wdt_base + REG_WTCR);
+
+	spin_unlock(&nuc900_wdt->wdt_lock);
+}
+
+static inline void nuc900_wdt_ping(void)
+{
+	nuc900_wdt->next_heartbeat = jiffies + heartbeat * HZ;
+}
+
+static int nuc900_wdt_open(struct inode *inode, struct file *file)
+{
+
+	if (test_and_set_bit(0, &nuc900wdt_busy))
+		return -EBUSY;
+
+	nuc900_wdt_start();
+
+	return nonseekable_open(inode, file);
+}
+
+static int nuc900_wdt_close(struct inode *inode, struct file *file)
+{
+	if (nuc900_wdt->expect_close == 42)
+		nuc900_wdt_stop();
+	else {
+		dev_crit(&nuc900_wdt->pdev->dev,
+			"Unexpected close, not stopping watchdog!\n");
+		nuc900_wdt_ping();
+	}
+
+	nuc900_wdt->expect_close = 0;
+	clear_bit(0, &nuc900wdt_busy);
+	return 0;
+}
+
+static const struct watchdog_info nuc900_wdt_info = {
+	.identity	= "nuc900 watchdog",
+	.options	= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
+						WDIOF_MAGICCLOSE,
+};
+
+static long nuc900_wdt_ioctl(struct file *file,
+					unsigned int cmd, unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	int new_value;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &nuc900_wdt_info,
+				sizeof(nuc900_wdt_info)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+
+	case WDIOC_KEEPALIVE:
+		nuc900_wdt_ping();
+		return 0;
+
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_value, p))
+			return -EFAULT;
+
+		heartbeat = new_value;
+		nuc900_wdt_ping();
+
+		return put_user(new_value, p);
+	case WDIOC_GETTIMEOUT:
+		return put_user(heartbeat, p);
+	default:
+		return -ENOTTY;
+	}
+}
+
+static ssize_t nuc900_wdt_write(struct file *file, const char __user *data,
+						size_t len, loff_t *ppos)
+{
+	if (!len)
+		return 0;
+
+	/* Scan for magic character */
+	if (!nowayout) {
+		size_t i;
+
+		nuc900_wdt->expect_close = 0;
+
+		for (i = 0; i < len; i++) {
+			char c;
+			if (get_user(c, data + i))
+				return -EFAULT;
+			if (c == 'V') {
+				nuc900_wdt->expect_close = 42;
+				break;
+			}
+		}
+	}
+
+	nuc900_wdt_ping();
+	return len;
+}
+
+static void nuc900_wdt_timer_ping(unsigned long data)
+{
+	if (time_before(jiffies, nuc900_wdt->next_heartbeat)) {
+		nuc900_wdt_keepalive();
+		mod_timer(&nuc900_wdt->timer, jiffies + WDT_TIMEOUT);
+	} else
+		dev_warn(&nuc900_wdt->pdev->dev, "Will reset the machine !\n");
+}
+
+static const struct file_operations nuc900wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.unlocked_ioctl	= nuc900_wdt_ioctl,
+	.open		= nuc900_wdt_open,
+	.release	= nuc900_wdt_close,
+	.write		= nuc900_wdt_write,
+};
+
+static struct miscdevice nuc900wdt_miscdev = {
+	.minor		= WATCHDOG_MINOR,
+	.name		= "watchdog",
+	.fops		= &nuc900wdt_fops,
+};
+
+static int __devinit nuc900wdt_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+
+	nuc900_wdt = kzalloc(sizeof(struct nuc900_wdt), GFP_KERNEL);
+	if (!nuc900_wdt)
+		return -ENOMEM;
+
+	nuc900_wdt->pdev = pdev;
+
+	spin_lock_init(&nuc900_wdt->wdt_lock);
+
+	nuc900_wdt->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (nuc900_wdt->res == NULL) {
+		dev_err(&pdev->dev, "no memory resource specified\n");
+		ret = -ENOENT;
+		goto err_get;
+	}
+
+	if (!request_mem_region(nuc900_wdt->res->start,
+				resource_size(nuc900_wdt->res), pdev->name)) {
+		dev_err(&pdev->dev, "failed to get memory region\n");
+		ret = -ENOENT;
+		goto err_get;
+	}
+
+	nuc900_wdt->wdt_base = ioremap(nuc900_wdt->res->start,
+					resource_size(nuc900_wdt->res));
+	if (nuc900_wdt->wdt_base == NULL) {
+		dev_err(&pdev->dev, "failed to ioremap() region\n");
+		ret = -EINVAL;
+		goto err_req;
+	}
+
+	nuc900_wdt->wdt_clock = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(nuc900_wdt->wdt_clock)) {
+		dev_err(&pdev->dev, "failed to find watchdog clock source\n");
+		ret = PTR_ERR(nuc900_wdt->wdt_clock);
+		goto err_map;
+	}
+
+	clk_enable(nuc900_wdt->wdt_clock);
+
+	setup_timer(&nuc900_wdt->timer, nuc900_wdt_timer_ping, 0);
+
+	if (misc_register(&nuc900wdt_miscdev)) {
+		dev_err(&pdev->dev, "err register miscdev on minor=%d (%d)\n",
+			WATCHDOG_MINOR, ret);
+		goto err_clk;
+	}
+
+	return 0;
+
+err_clk:
+	clk_disable(nuc900_wdt->wdt_clock);
+	clk_put(nuc900_wdt->wdt_clock);
+err_map:
+	iounmap(nuc900_wdt->wdt_base);
+err_req:
+	release_mem_region(nuc900_wdt->res->start,
+					resource_size(nuc900_wdt->res));
+err_get:
+	kfree(nuc900_wdt);
+	return ret;
+}
+
+static int __devexit nuc900wdt_remove(struct platform_device *pdev)
+{
+	misc_deregister(&nuc900wdt_miscdev);
+
+	clk_disable(nuc900_wdt->wdt_clock);
+	clk_put(nuc900_wdt->wdt_clock);
+
+	iounmap(nuc900_wdt->wdt_base);
+
+	release_mem_region(nuc900_wdt->res->start,
+					resource_size(nuc900_wdt->res));
+
+	kfree(nuc900_wdt);
+
+	return 0;
+}
+
+static struct platform_driver nuc900wdt_driver = {
+	.probe		= nuc900wdt_probe,
+	.remove		= __devexit_p(nuc900wdt_remove),
+	.driver		= {
+		.name	= "nuc900-wdt",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init nuc900_wdt_init(void)
+{
+	return platform_driver_register(&nuc900wdt_driver);
+}
+
+static void __exit nuc900_wdt_exit(void)
+{
+	platform_driver_unregister(&nuc900wdt_driver);
+}
+
+module_init(nuc900_wdt_init);
+module_exit(nuc900_wdt_exit);
+
+MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>");
+MODULE_DESCRIPTION("Watchdog driver for NUC900");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:nuc900-wdt");
diff --git a/drivers/watchdog/w90p910_wdt.c b/drivers/watchdog/w90p910_wdt.c
deleted file mode 100644
index 3cb8972..0000000
--- a/drivers/watchdog/w90p910_wdt.c
+++ /dev/null
@@ -1,353 +0,0 @@
-/*
- * Copyright (c) 2009 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#include <linux/bitops.h>
-#include <linux/errno.h>
-#include <linux/fs.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/kernel.h>
-#include <linux/miscdevice.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/types.h>
-#include <linux/watchdog.h>
-#include <linux/uaccess.h>
-
-#define REG_WTCR		0x1c
-#define WTCLK			(0x01 << 10)
-#define WTE			(0x01 << 7)	/*wdt enable*/
-#define WTIS			(0x03 << 4)
-#define WTIF			(0x01 << 3)
-#define WTRF			(0x01 << 2)
-#define WTRE			(0x01 << 1)
-#define WTR			(0x01 << 0)
-/*
- * The watchdog time interval can be calculated via following formula:
- * WTIS		real time interval (formula)
- * 0x00		((2^ 14 ) * ((external crystal freq) / 256))seconds
- * 0x01		((2^ 16 ) * ((external crystal freq) / 256))seconds
- * 0x02		((2^ 18 ) * ((external crystal freq) / 256))seconds
- * 0x03		((2^ 20 ) * ((external crystal freq) / 256))seconds
- *
- * The external crystal freq is 15Mhz in the w90p910 evaluation board.
- * So 0x00 = +-0.28 seconds, 0x01 = +-1.12 seconds, 0x02 = +-4.48 seconds,
- * 0x03 = +- 16.92 seconds..
- */
-#define WDT_HW_TIMEOUT		0x02
-#define WDT_TIMEOUT		(HZ/2)
-#define WDT_HEARTBEAT		15
-
-static int heartbeat = WDT_HEARTBEAT;
-module_param(heartbeat, int, 0);
-MODULE_PARM_DESC(heartbeat, "Watchdog heartbeats in seconds. "
-	"(default = " __MODULE_STRING(WDT_HEARTBEAT) ")");
-
-static int nowayout = WATCHDOG_NOWAYOUT;
-module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
-	"(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-
-struct w90p910_wdt {
-	struct resource  *res;
-	struct clk	 *wdt_clock;
-	struct platform_device *pdev;
-	void __iomem	 *wdt_base;
-	char		 expect_close;
-	struct timer_list timer;
-	spinlock_t       wdt_lock;
-	unsigned long next_heartbeat;
-};
-
-static unsigned long w90p910wdt_busy;
-struct w90p910_wdt *w90p910_wdt;
-
-static inline void w90p910_wdt_keepalive(void)
-{
-	unsigned int val;
-
-	spin_lock(&w90p910_wdt->wdt_lock);
-
-	val = __raw_readl(w90p910_wdt->wdt_base + REG_WTCR);
-	val |= (WTR | WTIF);
-	__raw_writel(val, w90p910_wdt->wdt_base + REG_WTCR);
-
-	spin_unlock(&w90p910_wdt->wdt_lock);
-}
-
-static inline void w90p910_wdt_start(void)
-{
-	unsigned int val;
-
-	spin_lock(&w90p910_wdt->wdt_lock);
-
-	val = __raw_readl(w90p910_wdt->wdt_base + REG_WTCR);
-	val |= (WTRE | WTE | WTR | WTCLK | WTIF);
-	val &= ~WTIS;
-	val |= (WDT_HW_TIMEOUT << 0x04);
-	__raw_writel(val, w90p910_wdt->wdt_base + REG_WTCR);
-
-	spin_unlock(&w90p910_wdt->wdt_lock);
-
-	w90p910_wdt->next_heartbeat = jiffies + heartbeat * HZ;
-	mod_timer(&w90p910_wdt->timer, jiffies + WDT_TIMEOUT);
-}
-
-static inline void w90p910_wdt_stop(void)
-{
-	unsigned int val;
-
-	del_timer(&w90p910_wdt->timer);
-
-	spin_lock(&w90p910_wdt->wdt_lock);
-
-	val = __raw_readl(w90p910_wdt->wdt_base + REG_WTCR);
-	val &= ~WTE;
-	__raw_writel(val, w90p910_wdt->wdt_base + REG_WTCR);
-
-	spin_unlock(&w90p910_wdt->wdt_lock);
-}
-
-static inline void w90p910_wdt_ping(void)
-{
-	w90p910_wdt->next_heartbeat = jiffies + heartbeat * HZ;
-}
-
-static int w90p910_wdt_open(struct inode *inode, struct file *file)
-{
-
-	if (test_and_set_bit(0, &w90p910wdt_busy))
-		return -EBUSY;
-
-	w90p910_wdt_start();
-
-	return nonseekable_open(inode, file);
-}
-
-static int w90p910_wdt_close(struct inode *inode, struct file *file)
-{
-	if (expect_close == 42)
-		w90p910_wdt_stop();
-	else {
-		dev_crit(&w90p910_wdt->pdev->dev,
-			"Unexpected close, not stopping watchdog!\n");
-		w90p910_wdt_ping();
-	}
-
-	w90p910_wdt->expect_close = 0;
-	clear_bit(0, &w90p910wdt_busy);
-	return 0;
-}
-
-static const struct watchdog_info w90p910_wdt_info = {
-	.identity	= "w90p910 watchdog",
-	.options	= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
-						WDIOF_MAGICCLOSE,
-};
-
-static long w90p910_wdt_ioctl(struct file *file,
-					unsigned int cmd, unsigned long arg)
-{
-	void __user *argp = (void __user *)arg;
-	int __user *p = argp;
-	int new_value;
-
-	switch (cmd) {
-	case WDIOC_GETSUPPORT:
-		return copy_to_user(argp, &w90p910_wdt_info,
-				sizeof(w90p910_wdt_info)) ? -EFAULT : 0;
-	case WDIOC_GETSTATUS:
-	case WDIOC_GETBOOTSTATUS:
-		return put_user(0, p);
-
-	case WDIOC_KEEPALIVE:
-		w90p910_wdt_ping();
-		return 0;
-
-	case WDIOC_SETTIMEOUT:
-		if (get_user(new_value, p))
-			return -EFAULT;
-
-		heartbeat = new_value;
-		w90p910_wdt_ping();
-
-		return put_user(new_value, p);
-	case WDIOC_GETTIMEOUT:
-		return put_user(heartbeat, p);
-	default:
-		return -ENOTTY;
-	}
-}
-
-static ssize_t w90p910_wdt_write(struct file *file, const char __user *data,
-						size_t len, loff_t *ppos)
-{
-	if (!len)
-		return 0;
-
-	/* Scan for magic character */
-	if (!nowayout) {
-		size_t i;
-
-		w90p910_wdt->expect_close = 0;
-
-		for (i = 0; i < len; i++) {
-			char c;
-			if (get_user(c, data + i))
-				return -EFAULT;
-			if (c == 'V') {
-				w90p910_wdt->expect_close = 42;
-				break;
-			}
-		}
-	}
-
-	w90p910_wdt_ping();
-	return len;
-}
-
-static void w90p910_wdt_timer_ping(unsigned long data)
-{
-	if (time_before(jiffies, w90p910_wdt->next_heartbeat)) {
-		w90p910_wdt_keepalive();
-		mod_timer(&w90p910_wdt->timer, jiffies + WDT_TIMEOUT);
-	} else
-		dev_warn(&w90p910_wdt->pdev->dev, "Will reset the machine !\n");
-}
-
-static const struct file_operations w90p910wdt_fops = {
-	.owner		= THIS_MODULE,
-	.llseek		= no_llseek,
-	.unlocked_ioctl	= w90p910_wdt_ioctl,
-	.open		= w90p910_wdt_open,
-	.release	= w90p910_wdt_close,
-	.write		= w90p910_wdt_write,
-};
-
-static struct miscdevice w90p910wdt_miscdev = {
-	.minor		= WATCHDOG_MINOR,
-	.name		= "watchdog",
-	.fops		= &w90p910wdt_fops,
-};
-
-static int __devinit w90p910wdt_probe(struct platform_device *pdev)
-{
-	int ret = 0;
-
-	w90p910_wdt = kzalloc(sizeof(struct w90p910_wdt), GFP_KERNEL);
-	if (!w90p910_wdt)
-		return -ENOMEM;
-
-	w90p910_wdt->pdev = pdev;
-
-	spin_lock_init(&w90p910_wdt->wdt_lock);
-
-	w90p910_wdt->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (w90p910_wdt->res == NULL) {
-		dev_err(&pdev->dev, "no memory resource specified\n");
-		ret = -ENOENT;
-		goto err_get;
-	}
-
-	if (!request_mem_region(w90p910_wdt->res->start,
-				resource_size(w90p910_wdt->res), pdev->name)) {
-		dev_err(&pdev->dev, "failed to get memory region\n");
-		ret = -ENOENT;
-		goto err_get;
-	}
-
-	w90p910_wdt->wdt_base = ioremap(w90p910_wdt->res->start,
-					resource_size(w90p910_wdt->res));
-	if (w90p910_wdt->wdt_base == NULL) {
-		dev_err(&pdev->dev, "failed to ioremap() region\n");
-		ret = -EINVAL;
-		goto err_req;
-	}
-
-	w90p910_wdt->wdt_clock = clk_get(&pdev->dev, NULL);
-	if (IS_ERR(w90p910_wdt->wdt_clock)) {
-		dev_err(&pdev->dev, "failed to find watchdog clock source\n");
-		ret = PTR_ERR(w90p910_wdt->wdt_clock);
-		goto err_map;
-	}
-
-	clk_enable(w90p910_wdt->wdt_clock);
-
-	setup_timer(&w90p910_wdt->timer, w90p910_wdt_timer_ping, 0);
-
-	if (misc_register(&w90p910wdt_miscdev)) {
-		dev_err(&pdev->dev, "err register miscdev on minor=%d (%d)\n",
-			WATCHDOG_MINOR, ret);
-		goto err_clk;
-	}
-
-	return 0;
-
-err_clk:
-	clk_disable(w90p910_wdt->wdt_clock);
-	clk_put(w90p910_wdt->wdt_clock);
-err_map:
-	iounmap(w90p910_wdt->wdt_base);
-err_req:
-	release_mem_region(w90p910_wdt->res->start,
-					resource_size(w90p910_wdt->res));
-err_get:
-	kfree(w90p910_wdt);
-	return ret;
-}
-
-static int __devexit w90p910wdt_remove(struct platform_device *pdev)
-{
-	misc_deregister(&w90p910wdt_miscdev);
-
-	clk_disable(w90p910_wdt->wdt_clock);
-	clk_put(w90p910_wdt->wdt_clock);
-
-	iounmap(w90p910_wdt->wdt_base);
-
-	release_mem_region(w90p910_wdt->res->start,
-					resource_size(w90p910_wdt->res));
-
-	kfree(w90p910_wdt);
-
-	return 0;
-}
-
-static struct platform_driver w90p910wdt_driver = {
-	.probe		= w90p910wdt_probe,
-	.remove		= __devexit_p(w90p910wdt_remove),
-	.driver		= {
-		.name	= "w90p910-wdt",
-		.owner	= THIS_MODULE,
-	},
-};
-
-static int __init w90p910_wdt_init(void)
-{
-	return platform_driver_register(&w90p910wdt_driver);
-}
-
-static void __exit w90p910_wdt_exit(void)
-{
-	platform_driver_unregister(&w90p910wdt_driver);
-}
-
-module_init(w90p910_wdt_init);
-module_exit(w90p910_wdt_exit);
-
-MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>");
-MODULE_DESCRIPTION("Watchdog driver for W90P910");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-MODULE_ALIAS("platform:w90p910-wdt");
-- 
1.5.6.3


  parent reply	other threads:[~2009-08-17 10:00 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-07-24 15:06 [PATCH] Add watchdog driver for w90p910 Wan ZongShun
2009-07-30  1:17 ` Wan ZongShun
2009-07-30  5:00   ` Wim Van Sebroeck
2009-07-30  5:03     ` Wan ZongShun
2009-08-04 20:10 ` Wim Van Sebroeck
2009-08-05  2:55   ` Wan ZongShun
2009-08-05  7:08     ` Wim Van Sebroeck
2009-08-05  8:00       ` Wan ZongShun
2009-08-05 10:31         ` Wim Van Sebroeck
2009-08-05 10:44           ` Wan ZongShun
2009-08-05 13:20           ` [PATCH v2] " Wan ZongShun
2009-08-17  2:40             ` Wan ZongShun
2009-08-17  9:14               ` Wim Van Sebroeck
2009-08-17  9:19                 ` Wan ZongShun
2009-08-17 10:00                 ` Wan ZongShun [this message]
2009-08-17 11:02                   ` Wim Van Sebroeck
2009-08-17 11:04                     ` Wan ZongShun
2009-08-05 11:37   ` [PATCH] " Wan ZongShun
2009-08-20 12:16     ` Wim Van Sebroeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4A892A21.2010503@gmail.com \
    --to=mcuos.com@gmail.com \
    --cc=linux-arm-kernel@lists.arm.linux.org.uk \
    --cc=linux-kernel@vger.kernel.org \
    --cc=wim@iguana.be \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.