From: Mario Limonciello <mario_limonciello@dell.com>
To: Johannes Berg <johannes@sipsolutions.net>,
Alan Jenkins <sourcejedi.lkml@googlemail.com>
Cc: Marcel Holtmann <marcel@holtmann.org>,
cezary.jackiewicz@gmail.com, linux-acpi@vger.kernel.org,
linux-kernel <linux-kernel@vger.kernel.org>,
"linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>
Subject: Re: [PATCH 2/3] Add rfkill support to compal-laptop
Date: Tue, 18 Aug 2009 17:00:13 -0500 [thread overview]
Message-ID: <4A8B246D.7050004@dell.com> (raw)
In-Reply-To: <1250631063.16393.14.camel@johannes.local>
[-- Attachment #1.1: Type: text/plain, Size: 846 bytes --]
Hi Guys:
Johannes Berg wrote:
> Hi everyone,
>
> That's a bit strange indeed, but I haven't seen the rest of the code.
>
> Does the 'soft block' bit change based on user input, like pressing a
> button?
>
> If not, you shouldn't poll that bit at all, but just set it based on
> what rfkill gives you as the return value of set_hw_state().
>
>
No it doesn't, so i've followed your advice in an updated patch, Thanks.
Alan Jenkins wrote:
> ... but you *do* need to unregister wifi_rfkill here, before you go on
> to destroy it.
>
> +err_wifi:
> + rfkill_destroy(wifi_rfkill);
> +
> + return ret;
> +}
>
> Regards
> Alan
>
I think I've addressed this properly now and only go through each of the error handlers as necessary.
--
Mario Limonciello
*Dell | Linux Engineering*
mario_limonciello@dell.com
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1.2: 02_add_rfkill_support.diff --]
[-- Type: text/x-patch; name="02_add_rfkill_support.diff", Size: 3274 bytes --]
--- compal-laptop.c.old 2009-08-18 05:23:39.668669312 -0500
+++ compal-laptop.c 2009-08-18 05:49:00.098015155 -0500
@@ -52,6 +52,7 @@
#include <linux/backlight.h>
#include <linux/platform_device.h>
#include <linux/autoconf.h>
+#include <linux/rfkill.h>
#define COMPAL_DRIVER_VERSION "0.2.6"
@@ -64,6 +65,10 @@
#define WLAN_MASK 0x01
#define BT_MASK 0x02
+static struct rfkill *wifi_rfkill;
+static struct rfkill *bt_rfkill;
+static struct platform_device *compal_device;
+
static int force;
module_param(force, bool, 0);
MODULE_PARM_DESC(force, "Force driver load, ignore DMI data");
@@ -89,6 +94,84 @@
return (int) result;
}
+static void compal_rfkill_poll(struct rfkill *rfkill, void *data)
+{
+ unsigned long radio = (unsigned long) data;
+ u8 result;
+ bool hw_blocked;
+ bool sw_blocked;
+
+ ec_read(COMPAL_EC_COMMAND_WIRELESS, &result);
+
+ hw_blocked = !(result & (KILLSWITCH_MASK | radio));
+ sw_blocked = rfkill_set_hw_state(rfkill, hw_blocked);
+
+ rfkill_set_sw_state(rfkill, sw_blocked);
+}
+
+static int compal_rfkill_set(void *data, bool blocked)
+{
+ unsigned long radio = (unsigned long) data;
+ u8 result, value;
+
+ ec_read(COMPAL_EC_COMMAND_WIRELESS, &result);
+
+ if ((result & KILLSWITCH_MASK) == 0)
+ return -EINVAL;
+
+ if (!blocked)
+ value = (u8) (result | radio);
+ else
+ value = (u8) (result & ~radio);
+ ec_write(COMPAL_EC_COMMAND_WIRELESS, value);
+
+ return 0;
+}
+
+static const struct rfkill_ops compal_rfkill_ops = {
+ .poll = compal_rfkill_poll,
+ .set_block = compal_rfkill_set,
+};
+
+static int setup_rfkill(void)
+{
+ int ret;
+
+ wifi_rfkill = rfkill_alloc("compal-wifi", &compal_device->dev,
+ RFKILL_TYPE_WLAN, &compal_rfkill_ops,
+ (void *) WLAN_MASK);
+ if (!wifi_rfkill)
+ return -ENOMEM;
+
+ ret = rfkill_register(wifi_rfkill);
+ if (ret)
+ goto err_wifi;
+
+ bt_rfkill = rfkill_alloc("compal-bluetooth", &compal_device->dev,
+ RFKILL_TYPE_BLUETOOTH, &compal_rfkill_ops,
+ (void *) BT_MASK);
+ if (!bt_rfkill) {
+ ret = -ENOMEM;
+ goto err_allocate_bt;
+ }
+ ret = rfkill_register(bt_rfkill);
+ if (ret)
+ goto err_register_bt;
+
+ return 0;
+
+err_register_bt:
+ rfkill_destroy(bt_rfkill);
+
+err_allocate_bt:
+ rfkill_unregister(wifi_rfkill);
+
+err_wifi:
+ rfkill_destroy(wifi_rfkill);
+
+ return ret;
+}
+
static int set_wlan_state(int state)
{
u8 result, value;
@@ -258,8 +341,6 @@
}
};
-static struct platform_device *compal_device;
-
/* Initialization */
static int dmi_check_cb(const struct dmi_system_id *id)
@@ -397,6 +478,10 @@
if (ret)
goto fail_platform_device2;
+ ret = setup_rfkill();
+ if (ret)
+ printk(KERN_WARNING "compal-laptop: Unable to setup rfkill\n");
+
printk(KERN_INFO "compal-laptop: driver "COMPAL_DRIVER_VERSION
" successfully loaded.\n");
@@ -428,6 +513,10 @@
platform_device_unregister(compal_device);
platform_driver_unregister(&compal_driver);
backlight_device_unregister(compalbl_device);
+ rfkill_unregister(wifi_rfkill);
+ rfkill_destroy(wifi_rfkill);
+ rfkill_unregister(bt_rfkill);
+ rfkill_destroy(bt_rfkill);
printk(KERN_INFO "compal-laptop: driver unloaded.\n");
}
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 260 bytes --]
next prev parent reply other threads:[~2009-08-18 21:59 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-17 23:27 [PATCH 2/3] Add rfkill support to compal-laptop Mario Limonciello
2009-08-18 1:24 ` Marcel Holtmann
2009-08-18 7:44 ` Alan Jenkins
2009-08-18 14:52 ` Alan Jenkins
2009-08-18 17:26 ` Mario Limonciello
2009-08-18 21:08 ` Alan Jenkins
[not found] ` <9b2b86520908181408v5f7875b6sea31d8d95cc08c0b-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2009-08-18 21:31 ` Johannes Berg
2009-08-18 21:31 ` Johannes Berg
2009-08-18 22:00 ` Mario Limonciello [this message]
2009-08-19 8:51 ` Alan Jenkins
2009-08-19 9:01 ` Johannes Berg
2009-08-19 11:43 ` Cezary Jackiewicz
[not found] ` <1250672475.25419.7.camel-YfaajirXv2244ywRPIzf9A@public.gmane.org>
2009-08-19 16:46 ` Mario Limonciello
2009-08-19 16:46 ` Mario Limonciello
2009-08-19 16:57 ` Alan Jenkins
2009-08-19 17:13 ` Johannes Berg
2009-08-19 18:39 ` Mario Limonciello
2009-08-18 21:17 ` Alan Jenkins
2009-08-18 8:33 ` Alan Jenkins
2009-08-18 8:19 ` Alan Jenkins
2009-08-18 12:22 ` Alan Jenkins
-- strict thread matches above, loose matches on Subject: below --
2009-08-19 18:36 Mario Limonciello
2009-08-19 18:42 ` Johannes Berg
2009-08-19 18:47 ` Mario Limonciello
2009-08-20 8:52 ` Alan Jenkins
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A8B246D.7050004@dell.com \
--to=mario_limonciello@dell.com \
--cc=cezary.jackiewicz@gmail.com \
--cc=johannes@sipsolutions.net \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=sourcejedi.lkml@googlemail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.