From: Klaus Schmidinger <Klaus.Schmidinger@cadsoft.de>
To: linux-media@vger.kernel.org
Subject: [DVB] Sticky module dvb_pll
Date: Sun, 23 Aug 2009 15:11:00 +0200 [thread overview]
Message-ID: <4A913FE4.8040003@cadsoft.de> (raw)
When I use the latest driver from http://linuxtv.org/hg/v4l-dvb (4d727d223236)
and load all the modules I need, as in
/sbin/modprobe firmware_class
/sbin/modprobe i2c-core
/sbin/insmod ./v4l1-compat.ko
/sbin/insmod ./cx24113.ko
/sbin/insmod ./s5h1420.ko
/sbin/insmod ./videobuf-core.ko
/sbin/insmod ./ttpci-eeprom.ko
/sbin/insmod ./cx24123.ko
/sbin/insmod ./saa7146.ko
/sbin/insmod ./videodev.ko
/sbin/insmod ./videobuf-dma-sg.ko
/sbin/insmod ./saa7146_vv.ko
/sbin/insmod ./mt352.ko
/sbin/insmod ./ves1x93.ko
/sbin/insmod ./dvb-core.ko
/sbin/insmod ./stv0299.ko
/sbin/insmod ./dvb-ttpci.ko
/sbin/insmod ./budget-core.ko
/sbin/insmod ./budget.ko
/sbin/insmod ./b2c2-flexcop.ko
/sbin/insmod ./b2c2-flexcop-pci.ko
lsmod shows
Module Size Used by
dvb_pll 16392 1
b2c2_flexcop_pci 14484 0
b2c2_flexcop 37004 1 b2c2_flexcop_pci
budget 21508 0
budget_core 15748 1 budget
dvb_ttpci 351180 0
stv0299 14984 1
dvb_core 95724 5 b2c2_flexcop,budget,budget_core,dvb_ttpci,stv0299
ves1x93 10884 2
mt352 10756 1
saa7146_vv 52352 1 dvb_ttpci
videobuf_dma_sg 18948 1 saa7146_vv
videodev 44704 1 saa7146_vv
saa7146 23816 4 budget,budget_core,dvb_ttpci,saa7146_vv
cx24123 18824 1 b2c2_flexcop
ttpci_eeprom 6656 2 budget_core,dvb_ttpci
videobuf_core 23556 2 saa7146_vv,videobuf_dma_sg
s5h1420 16388 1 b2c2_flexcop
cx24113 12420 1 b2c2_flexcop
v4l1_compat 18052 1 videodev
w83781d 34984 0
hwmon_vid 7040 1 w83781d
iptable_filter 7552 0
ip_tables 17936 1 iptable_filter
ip6_tables 19088 0
x_tables 21380 2 ip_tables,ip6_tables
nfs 266964 1
lockd 72312 2 nfs
nfs_acl 7680 1 nfs
sunrpc 197372 13 nfs,lockd,nfs_acl
af_packet 26368 0
fuse 54044 1
loop 23044 0
dm_mod 66388 0
ppdev 13060 0
rtc_cmos 14752 0
rtc_core 24860 1 rtc_cmos
rtc_lib 7040 1 rtc_core
parport_pc 42428 0
parport 40660 2 ppdev,parport_pc
8139too 30976 0
sr_mod 21160 0
cdrom 38300 1 sr_mod
i2c_ali1535 11268 0
8139cp 27392 0
i2c_ali15x3 12036 0
firmware_class 13696 3 b2c2_flexcop,budget,dvb_ttpci
ali_agp 11136 1
mii 9600 2 8139too,8139cp
shpchp 37780 0
i2c_core 28820 15 dvb_pll,b2c2_flexcop,budget,budget_core,dvb_ttpci,stv0299,ves1x93,mt352,cx24123,ttpci_eeprom,s5h1420,cx24113,w83781d,i2c_ali1535,i2c_ali15x3
agpgart 38580 1 ali_agp
pci_hotplug 33828 1 shpchp
alim7101_wdt 11928 0
sg 39732 0
sd_mod 33048 4
ohci_hcd 27396 0
usbcore 152268 2 ohci_hcd
edd 14152 0
ext3 143880 2
mbcache 13060 1 ext3
jbd 61216 1 ext3
pata_ali 15620 3
libata 164316 1 pata_ali
scsi_mod 156404 4 sr_mod,sg,sd_mod,libata
dock 15248 1 libata
If immediately after that I do
/sbin/rmmod dvb_ttpci
/sbin/rmmod saa7146_vv
/sbin/rmmod budget
/sbin/rmmod b2c2_flexcop_pci
/sbin/rmmod budget_core
/sbin/rmmod stv0299
/sbin/rmmod b2c2_flexcop
/sbin/rmmod videodev
/sbin/rmmod videobuf_dma_sg
/sbin/rmmod cx24113
/sbin/rmmod saa7146
/sbin/rmmod ttpci_eeprom
/sbin/rmmod ves1x93
/sbin/rmmod s5h1420
/sbin/rmmod mt352
/sbin/rmmod v4l1_compat
/sbin/rmmod dvb_core
/sbin/rmmod dvb_pll
ERROR: Module dvb_pll is in use
/sbin/rmmod videobuf_core
/sbin/rmmod cx24123
I get an error when trying to rmmod dvb_pll.
lsmod then shows
Module Size Used by
dvb_pll 16392 1
w83781d 34984 0
hwmon_vid 7040 1 w83781d
iptable_filter 7552 0
ip_tables 17936 1 iptable_filter
ip6_tables 19088 0
x_tables 21380 2 ip_tables,ip6_tables
nfs 266964 1
lockd 72312 2 nfs
nfs_acl 7680 1 nfs
sunrpc 197372 13 nfs,lockd,nfs_acl
af_packet 26368 0
fuse 54044 1
loop 23044 0
dm_mod 66388 0
ppdev 13060 0
rtc_cmos 14752 0
rtc_core 24860 1 rtc_cmos
rtc_lib 7040 1 rtc_core
parport_pc 42428 0
parport 40660 2 ppdev,parport_pc
8139too 30976 0
sr_mod 21160 0
cdrom 38300 1 sr_mod
i2c_ali1535 11268 0
8139cp 27392 0
i2c_ali15x3 12036 0
firmware_class 13696 0
ali_agp 11136 1
mii 9600 2 8139too,8139cp
shpchp 37780 0
i2c_core 28820 4 dvb_pll,w83781d,i2c_ali1535,i2c_ali15x3
agpgart 38580 1 ali_agp
pci_hotplug 33828 1 shpchp
alim7101_wdt 11928 0
sg 39732 0
sd_mod 33048 4
ohci_hcd 27396 0
usbcore 152268 2 ohci_hcd
edd 14152 0
ext3 143880 2
mbcache 13060 1 ext3
jbd 61216 1 ext3
pata_ali 15620 3
libata 164316 1 pata_ali
scsi_mod 156404 4 sr_mod,sg,sd_mod,libata
dock 15248 1 libata
Only an explicit
rmmod -f dvb_pll
removes the dvb_pll module and lsmod goes to
Module Size Used by
w83781d 34984 0
hwmon_vid 7040 1 w83781d
iptable_filter 7552 0
ip_tables 17936 1 iptable_filter
ip6_tables 19088 0
x_tables 21380 2 ip_tables,ip6_tables
nfs 266964 1
lockd 72312 2 nfs
nfs_acl 7680 1 nfs
sunrpc 197372 13 nfs,lockd,nfs_acl
af_packet 26368 0
fuse 54044 1
loop 23044 0
dm_mod 66388 0
ppdev 13060 0
rtc_cmos 14752 0
rtc_core 24860 1 rtc_cmos
rtc_lib 7040 1 rtc_core
parport_pc 42428 0
parport 40660 2 ppdev,parport_pc
8139too 30976 0
sr_mod 21160 0
cdrom 38300 1 sr_mod
i2c_ali1535 11268 0
8139cp 27392 0
i2c_ali15x3 12036 0
firmware_class 13696 0
ali_agp 11136 1
mii 9600 2 8139too,8139cp
shpchp 37780 0
i2c_core 28820 3 w83781d,i2c_ali1535,i2c_ali15x3
agpgart 38580 1 ali_agp
pci_hotplug 33828 1 shpchp
alim7101_wdt 11928 0
sg 39732 0
sd_mod 33048 4
ohci_hcd 27396 0
usbcore 152268 2 ohci_hcd
edd 14152 0
ext3 143880 2
mbcache 13060 1 ext3
jbd 61216 1 ext3
pata_ali 15620 3
libata 164316 1 pata_ali
scsi_mod 156404 4 sr_mod,sg,sd_mod,libata
dock 15248 1 libata
Is this normal behavior, or should dvb_pll be removed with a
plain rmmod?
Klaus
next reply other threads:[~2009-08-23 13:28 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-23 13:11 Klaus Schmidinger [this message]
2009-08-23 23:20 ` [DVB] Sticky module dvb_pll hermann pitton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A913FE4.8040003@cadsoft.de \
--to=klaus.schmidinger@cadsoft.de \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.