From: Jeremy Fitzhardinge <jeremy@goop.org>
To: Daniel Schroeder <sec@dschroeder.info>
Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>,
"Yu, Ke" <ke.yu@intel.com>
Subject: Re: pvops dom0 20090825 xen_acpi panic
Date: Tue, 25 Aug 2009 11:29:08 -0700 [thread overview]
Message-ID: <4A942D74.20104@goop.org> (raw)
In-Reply-To: <4A942449.8020707@dschroeder.info>
On 08/25/09 10:50, Daniel Schroeder wrote:
> Hi Jeremy,
>
(CC:d Ke)
> 32bit machine...on 64bit pm works...
> <snip>
> xenbus_probe_backend_init bus registered ok
>
>
> xenbus_probe_frontend_init bus registered ok
>
>
> BUG: unable to handle kernel NULL pointer dereference at 00000029
>
>
> IP: [<c1649e85>] xen_acpi_processor_extcntl_init+0x8/0x43
>
>
> *pdpt = 0000000001689001 *pde = 0000000000000000
>
>
> Oops: 0000 [#1] SMP
>
>
> last sysfs file:
>
>
>
>
>
> Pid: 1, comm: swapper Not tainted (2.6.31-rc6 #3)
>
>
> EIP: 0060:[<c1649e85>] EFLAGS: 00010246 CPU: 0
> EIP is at xen_acpi_processor_extcntl_init+0x8/0x43
> EAX: 00000000 EBX: c1672eb0 ECX: c15e916c EDX: 00000000
> ESI: c1649e7d EDI: 00000000 EBP: c784bf54 ESP: c784bf54
> DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
> Process swapper (pid: 1, ti=c784a000 task=c7849bc0 task.ti=c784a000)
> Stack:
> c784bfc4 c100203a 0000003f c7864540 c155b4d1 c784bfa4 c784bf84 c10d7cc4
> <0> 00000001 c7864600 0000000f c160e300 c784bfb0 c106a814 c1497a60 0000000f
> <0> 0000000f 3531bfb0 00000000 00000000 000001ff c161e120 c161e124 c784bfc4
> Call Trace:
> [<c100203a>] ? do_one_initcall+0x2a/0x160
> [<c10d7cc4>] ? create_proc_entry+0x54/0xb0
> [<c106a814>] ? register_irq_proc+0xa4/0xc0
> [<c106a895>] ? init_irq_proc+0x65/0x80
> [<c162931d>] ? kernel_init+0x13c/0x195
> [<c16291e1>] ? kernel_init+0x0/0x195
> [<c1009607>] ? kernel_thread_helper+0x7/0x10
> Code: ba 08 98 5e c1 a1 b8 b8 6c c1 e8 d7 6d a9 ff ba f0 97 5e c1 a1 b8
> b8 6c c1 e8 d8 49 a9 ff e9 51 ff ff ff 55 a1 44 30 69 c1 89 e5 <0f> b6
> 40 29 85 c0 74 2a a8 01 74 0a c7 05 98 99 5e c1 e0 b1 2c
> EIP: [<c1649e85>] xen_acpi_processor_extcntl_init+0x8/0x43 SS:ESP
> 0068:c784bf54
> CR2: 0000000000000029
> ---[ end trace 4eaa2a86a8e2da22 ]---
> Kernel panic - not syncing: Attempted to kill init!
> Pid: 1, comm: swapper Tainted: G D 2.6.31-rc6 #3
> Call Trace:
> [<c148d491>] ? printk+0x18/0x1a
> [<c148d3d0>] panic+0x43/0xec
> [<c103a1db>] do_exit+0x59b/0x670
> [<c148d491>] ? printk+0x18/0x1a
> [<c100c532>] oops_end+0x92/0xa0
> [<c148d491>] ? printk+0x18/0x1a
> [<c10234b6>] no_context+0xb6/0x1a0
> [<c10235fb>] __bad_area_nosemaphore+0x5b/0x170
> [<c12655e1>] ? __const_udelay+0x31/0x40
> [<c12f48e2>] ? wait_for_xmitr+0x52/0xc0
> [<c12f4950>] ? serial8250_console_putchar+0x0/0x30
> [<c12f4c70>] ? serial8250_console_write+0x0/0x110
> [<c1036df0>] ? __call_console_drivers+0x60/0x70
> [<c104f44a>] ? up+0x2a/0x40
> [<c1037311>] ? release_console_sem+0x1a1/0x1e0
> [<c1023722>] bad_area_nosemaphore+0x12/0x20
> [<c1023a6c>] do_page_fault+0x1bc/0x260
> [<c1649e7d>] ? xen_acpi_processor_extcntl_init+0x0/0x43
> [<c10238b0>] ? do_page_fault+0x0/0x260
> [<c148fba6>] error_code+0x66/0x6c
> [<c1649e7d>] ? xen_acpi_processor_extcntl_init+0x0/0x43
> [<c10238b0>] ? do_page_fault+0x0/0x260
> [<c1649e85>] ? xen_acpi_processor_extcntl_init+0x8/0x43
> [<c100203a>] do_one_initcall+0x2a/0x160
> [<c10d7cc4>] ? create_proc_entry+0x54/0xb0
> [<c106a814>] ? register_irq_proc+0xa4/0xc0
> [<c106a895>] ? init_irq_proc+0x65/0x80
> [<c162931d>] kernel_init+0x13c/0x195
> [<c16291e1>] ? kernel_init+0x0/0x195
> [<c1009607>] kernel_thread_helper+0x7/0x10
> </snap>
>
>
next prev parent reply other threads:[~2009-08-25 18:29 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-25 17:50 pvops dom0 20090825 xen_acpi panic Daniel Schroeder
2009-08-25 18:29 ` Jeremy Fitzhardinge [this message]
2009-08-26 14:39 ` Yu, Ke
2009-08-27 19:27 ` Daniel Schroeder
2009-08-28 3:06 ` Yu, Ke
2009-08-28 8:45 ` Yu, Ke
2009-08-28 12:15 ` Daniel Schroeder
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A942D74.20104@goop.org \
--to=jeremy@goop.org \
--cc=ke.yu@intel.com \
--cc=sec@dschroeder.info \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.