From: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
To: Felipe Castro <felipecpc1@domain.hid>
Cc: xenomai@xenomai.org
Subject: Re: [Xenomai-core] [PXA + Xenomai] Latency program
Date: Fri, 28 Aug 2009 20:04:14 +0200 [thread overview]
Message-ID: <4A981C1E.8000904@domain.hid> (raw)
In-Reply-To: <4A981B54.4020908@domain.hid>
Gilles Chanteperdrix wrote:
> Felipe Castro wrote:
>> Hi ,
>>
>> I'm trying xenomai running on PXA270 Voipac module.
>> Acctually i have a problem when running the lantency test program.
>>
>> The module loads OK , but when i run latency program:
>>
>> [ 110.874334] Xenomai: starting native API services.
>> [ 282.865308] I-pipe: Detected illicit call from domain 'Xenomai'
>> [ 282.865356] into a service reserved for domain 'Linux' and below.
>> [ 282.903226] [<c0023068>] (dump_stack+0x0/0x18) from [<c006cbcc>]
>> (ipipe_check_context+0xdc/0x100)
>> [ 282.929809] [<c006caf0>] (ipipe_check_context+0x0/0x100) from
>> [<c0066168>] (module_address_lookup+0x34/0x108)
>> [ 282.959374] [<c0066134>] (module_address_lookup+0x0/0x108) from
>> [<c00670e4>] (kallsyms_lookup+0x7c/0x80)
>> [ 282.987650] [<c0067068>] (kallsyms_lookup+0x0/0x80) from [<c0067208>]
>> (sprint_symbol+0x38/0xb0)
>> [ 283.013599] [<c00671d0>] (sprint_symbol+0x0/0xb0) from [<c00672a4>]
>> (__print_symbol+0x24/0x38)
>> [ 283.039294] r6:c03334f8 r5:c7035e24 r4:c02b5728
>> [ 283.053066] [<c0067280>] (__print_symbol+0x0/0x38) from [<c007cfec>]
>> (xnpod_trap_fault+0xc8/0x258)
>> [ 283.079818] r5:c7040810 r4:c7035f40
>> [ 283.090466] [<c007cf24>] (xnpod_trap_fault+0x0/0x258) from [<c0073b30>]
>> (xnarch_trap_fault+0x24/0x2c)
>> [ 283.117967] r6:c0330cc4 r5:c02f6c48 r4:c0332950
>> [ 283.131742] [<c0073b0c>] (xnarch_trap_fault+0x0/0x2c) from [<c01dcd38>]
>> (exception_event+0x50/0x74)
>> [ 283.158751] [<c01dcce8>] (exception_event+0x0/0x74) from [<c006bbac>]
>> (__ipipe_dispatch_event+0xdc/0x1e8)
>> [ 283.187285] r4:00000000
>> [ 283.194805] [<c006bad0>] (__ipipe_dispatch_event+0x0/0x1e8) from
>> [<c001ee04>] (do_fpe+0x18/0x3c)
>> [ 283.221016] I-pipe tracer log (100 points):
>> [ 283.233469] | + func 0 ipipe_trace_panic_freeze+0x10
>> (ipipe_check_context+0x5c)
>> [ 283.260735] | + func -4 ipipe_check_context+0x10
>> (module_address_lookup+0x34)
>> [ 283.287176] | + func -6 module_address_lookup+0x10
>> (kallsyms_lookup+0x7c)
>> [ 283.312583] | + func -10 in_gate_area_no_task+0x10
>> (is_ksym_addr+0x34)
>> [ 283.336956] | + func -13 is_ksym_addr+0x10
>> (kallsyms_lookup+0x38)
>> [ 283.360036] | + func -15 kallsyms_lookup+0x14
>> (sprint_symbol+0x38)
>> [ 283.383375] | + func -18 sprint_symbol+0x14
>> (__print_symbol+0x24)
>> [ 283.406456] | + func -21 __print_symbol+0x14
>> (xnpod_trap_fault+0xc8)
>> [ 283.430313] | + func -24 xnpod_trap_fault+0x14
>> (xnarch_trap_fault+0x24)
>> [ 283.454943] | + func -27 xnarch_trap_fault+0x14
>> (exception_event+0x50)
>> [ 283.479316] | + func -30 exception_event+0x10
>> (__ipipe_dispatch_event+0xdc)
>> [ 283.504982] | + func -34 __ipipe_dispatch_event+0x14
>> (do_fpe+0x18)
>> [ 283.528320] | + end 0x80000001 -45 __ipipe_dispatch_event+0x1c8
>> (__ipipe_syscall_root+0x80)
>> [ 283.555562] | + begin 0x80000001 -48 __ipipe_dispatch_event+0x104
>> (__ipipe_syscall_root+0x80)
>> [ 283.582778] | + end 0x80000000 -52
>> ipipe_unstall_pipeline_head+0x90 (xnshadow_harden+0x1a0)
>> [ 283.610021] | # begin 0x80000000 -56
>> ipipe_unstall_pipeline_head+0x34 (xnshadow_harden+0x1a0)
>> [ 283.637262] # func -58
>> ipipe_unstall_pipeline_head+0x10 (xnshadow_harden+0x1a0)
>> [ 283.664477] # func -63 xnpod_switch_fpu+0x10
>> (xnshadow_harden+0x190)
>> [ 283.688851] | # end 0x80000001 -66 __sched_text_start+0x6d0
>> (xnshadow_harden+0xa8)
>> [ 283.713793] | # begin 0x80000001 -69 __sched_text_start+0x6b8
>> (xnshadow_harden+0xa8)
>> [ 283.738707] | # end 0x80000000 -71 __sched_text_start+0x65c
>> (xnshadow_harden+0xa8)
>> [ 283.763597] | # [ 304] telnetd -1 -92 xnpod_schedule+0xb4
>> (xnpod_schedule_handler+0x54)
>> [ 283.789056] | # func -95 xnpod_schedule+0x14
>> (xnpod_schedule_handler+0x54)
>> [ 283.814463] | # func -98 xnpod_schedule_handler+0x10
>> (__ipipe_sync_stage+0x1b4)
>> [ 283.841162] | + func -101 __ipipe_sync_stage+0x10
>> (ipipe_suspend_domain+0xa4)
>> [ 283.867086] | + func -104 ipipe_suspend_domain+0x10
>> (__ipipe_walk_pipeline+0x74)
>> [ 283.893783] | +func -108 __ipipe_walk_pipeline+0x10
>> (__ipipe_restore_pipeline_head+0xc4)
>> [ 283.922809] | * +func -111
>> __ipipe_restore_pipeline_head+0x10 (gatekeeper_thread+0x180)
>> [ 283.951058] | * +func -116 __ipipe_set_irq_pending+0x10
>> (__ipipe_dispatch_wired+0x7c)
>> [ 283.978792] | * +func -120 __ipipe_dispatch_wired+0x10
>> (__ipipe_handle_irq+0xa4)
>> [ 284.005233] | * +func -124 __ipipe_handle_irq+0x10
>> (ipipe_trigger_irq+0x7c)
>> [ 284.030381] | * +func -128 ipipe_trigger_irq+0x10
>> (xnpod_schedule+0x34)
>> [ 284.054494] | * +func -130 xnpod_schedule+0x14
>> (gatekeeper_thread+0x164)
>> [ 284.078868] | * +func -133 disengage_irq_shield+0x10
>> (gatekeeper_thread+0x160)
>> [ 284.104792] | * +[ 342] display- 0 -142 xnpod_resume_thread+0x70
>> (gatekeeper_thread+0x15c)
>> [ 284.130509] | * +func -145 xnpod_resume_thread+0x14
>> (gatekeeper_thread+0x15c)
>> [ 284.156173] | +begin 0x80000000 -147 gatekeeper_thread+0x140
>> (kthread+0x58)
>> [ 284.178789] | +end 0x80000000 -150
>> __ipipe_restore_pipeline_head+0xd8 (rpi_pop+0x4cc)
>> [ 284.204454] | * +func -153
>> __ipipe_restore_pipeline_head+0x10 (rpi_pop+0x4cc)
>> [ 284.230119] | +begin 0x80000000 -157 rpi_pop+0x38
>> (gatekeeper_thread+0x120)
>> [ 284.252709] +func -159 rpi_pop+0x14
>> (gatekeeper_thread+0x120)
>> [ 284.275273] +func -162 kthread_should_stop+0x10
>> (gatekeeper_thread+0xf8)
>> [ 284.300680] +func -165 ipipe_check_context+0x10
>> (__sched_text_start+0x750)
>> [ 284.326603] +func -168 finish_task_switch+0x10
>> (__sched_text_start+0x6e8)
>> [ 284.352269] | +end 0x80000001 -170 __sched_text_start+0x6d0
>> (gatekeeper_thread+0xf4)
>> [ 284.377701] | +begin 0x80000001 -173 __sched_text_start+0x6b8
>> (gatekeeper_thread+0xf4)
>> [ 284.403133] | +end 0x80000000 -176 __sched_text_start+0x65c
>> (gatekeeper_thread+0xf4)
>> [ 284.428565] | +func -180 ipipe_check_context+0x10
>> (__atomic_notifier_call_chain+0x68)
>> [ 284.456841] | +func -182 iwmmxt_do+0x10
>> (notifier_call_chain+0x4c)
>> [ 284.480180] | +func -185 nwfpe_notify+0x10
>> (notifier_call_chain+0x4c)
>> [ 284.504321] | +func -188 notifier_call_chain+0x10
>> (__atomic_notifier_call_chain+0x5c)
>> [ 284.532571] | +func -191 ipipe_check_context+0x10
>> (__atomic_notifier_call_chain+0x34)
>> [ 284.560845] | +func -193
>> __atomic_notifier_call_chain+0x14 (atomic_notifier_call_chain+0x24)
>> [ 284.590904] | +func -195
>> atomic_notifier_call_chain+0x14 (__switch_to+0x30)
>> [ 284.616570] | +begin 0x80000000 -199 __sched_text_start+0x634
>> (xnshadow_harden+0xa8)
>> [ 284.641486] | +end 0x80000001 -201 __sched_text_start+0x4a0
>> (xnshadow_harden+0xa8)
>> [ 284.666375] | +begin 0x80000001 -204 __sched_text_start+0x484
>> (xnshadow_harden+0xa8)
>> [ 284.691290] | +end 0x80000001 -206 __ipipe_dispatch_event+0x1c8
>> (__sched_text_start+0x44c)
>> [ 284.718248] | +begin 0x80000001 -209 __ipipe_dispatch_event+0x104
>> (__sched_text_start+0x44c)
>> [ 284.745206] | +end 0x80000000 -211
>> __ipipe_restore_pipeline_head+0xd8 (schedule_event+0xbb4)
>> [ 284.772707] | * +func -214
>> __ipipe_restore_pipeline_head+0x10 (schedule_event+0xbb4)
>> [ 284.800180] | +begin 0x80000000 -216 schedule_event+0x6b0
>> (__ipipe_dispatch_event+0xdc)
>> [ 284.825872] +func -219 schedule_event+0x14
>> (__ipipe_dispatch_event+0xdc)
>> [ 284.851278] | +end 0x80000001 -222 __ipipe_dispatch_event+0xc4
>> (__sched_text_start+0x44c)
>> [ 284.878004] | +begin 0x80000001 -225 __ipipe_dispatch_event+0x40
>> (__sched_text_start+0x44c)
>> [ 284.904727] +func -227 __ipipe_dispatch_event+0x14
>> (__sched_text_start+0x44c)
>> [ 284.931427] +func -230 ipipe_check_context+0x10
>> (__sched_text_start+0x3c0)
>> [ 284.957351] | +end 0x80000000 -232 __ipipe_unstall_root+0x64
>> (__sched_text_start+0x3b0)
>> [ 284.983533] | #begin 0x80000000 -235 __ipipe_unstall_root+0x34
>> (__sched_text_start+0x3b0)
>> [ 285.009741] #func -237 __ipipe_unstall_root+0x10
>> (__sched_text_start+0x3b0)
>> [ 285.035922] #func -243 pick_next_task_rt+0x10
>> (__sched_text_start+0x250)
>> [ 285.061329] #func -247 check_spread+0x10
>> (put_prev_task_fair+0x3c)
>> [ 285.085185] #func -249 put_prev_task_fair+0x10
>> (__sched_text_start+0x214)
>> [ 285.110850] #func -254 calc_delta_mine+0x14
>> (update_curr+0xcc)
>> [ 285.133672] #func -257 update_curr+0x14
>> (dequeue_task_fair+0x2c)
>> [ 285.157011] #func -260 dequeue_task_fair+0x10
>> (dequeue_task+0x124)
>> [ 285.180867] #func -265 dequeue_task+0x14
>> (deactivate_task+0x2c)
>> [ 285.203948] #func -268 deactivate_task+0x10
>> (__sched_text_start+0x1f8)
>> [ 285.228837] | #end 0x80000001 -271 __sched_text_start+0x18c
>> (xnshadow_harden+0xa8)
>> [ 285.253753] | #begin 0x80000001 -273 __sched_text_start+0x174
>> (xnshadow_harden+0xa8)
>> [ 285.278669] #func -276 ipipe_check_context+0x10
>> (__sched_text_start+0x144)
>> [ 285.304592] #func -279 sched_clock+0x10
>> (sched_clock_cpu+0x30)
>> [ 285.327415] #func -281 sched_clock_cpu+0x10
>> (__sched_text_start+0x134)
>> [ 285.352304] | #end 0x80000001 -283 __sched_text_start+0x128
>> (xnshadow_harden+0xa8)
>> [ 285.377220] | +begin 0x80000001 -286 __sched_text_start+0x108
>> (xnshadow_harden+0xa8)
>> [ 285.402135] +func -288 ipipe_check_context+0x10
>> (__sched_text_start+0x94)
>> [ 285.427801] +func -290 preempt_schedule+0x10
>> (__sched_text_start+0x78)
>> [ 285.452691] +func -293 ipipe_check_context+0x10
>> (__sched_text_start+0x60)
>> [ 285.478355] +func -295 ipipe_check_context+0x10
>> (__sched_text_start+0x24)
>> [ 285.504020] +func -297 __sched_text_start+0x14
>> (xnshadow_harden+0xa8)
>> [ 285.528653] +func -300 preempt_schedule+0x10
>> (__wake_up_sync+0xdc)
>> [ 285.552509] +func -302 ipipe_check_context+0x10
>> (__wake_up_sync+0xc4)
>> [ 285.577140] | +end 0x80000000 -304 __ipipe_unstall_root+0x64
>> (__ipipe_restore_root+0x64)
>> [ 285.603580] | #begin 0x80000000 -306 __ipipe_unstall_root+0x34
>> (__ipipe_restore_root+0x64)
>> [ 285.630021] #func -308 __ipipe_unstall_root+0x10
>> (__ipipe_restore_root+0x64)
>> [ 285.656461] #func -311 __ipipe_restore_root+0x10
>> (__wake_up_sync+0xbc)
>> [ 285.681351] #func -313 preempt_schedule+0x10
>> (try_to_wake_up+0x138)
>> [ 285.705466] #func -315 ipipe_check_context+0x10
>> (try_to_wake_up+0x120)
>> [ 285.730355] | #end 0x80000001 -318 __ipipe_restore_root+0x58
>> (try_to_wake_up+0x118)
>> [ 285.755503] | #begin 0x80000001 -320 __ipipe_restore_root+0x38
>> (try_to_wake_up+0x118)
>> [ 285.780689] invalid use of FPU in Xenomai context at 0x93e0
>> [ 285.797290] Xenomai: Switching display-340 to secondary mode after
>> exception #5 from user-space at 0x93e0 (pid 342)
>> [ 285.829719] Xenomai: registered exported object dispsem-342 (semaphores)
>>
>> Any idea about ?
>
> Yes, it is the same problem as was posted a few days ago: the FPU
> support for PXA is not implemented. So, you should apply the patch that
> was posted a few days ago. The backtrace is due to the fact that we use
> print_symbol, which is verboten in real-time context, this needs to be
> fixed.
>
> BUT, and that is a capital "but", be aware that when latency or any
other user-space real-time application which will use FPU while in
primary mode will switch to secondary mode, which will induce big latencies.
> So, if you do not want the high latencies, you are probably better off
> compiling real-time applications with -msoft-float.
>
>
--
Gilles.
next prev parent reply other threads:[~2009-08-28 18:04 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-28 17:50 [Xenomai-core] [PXA + Xenomai] Latency program Felipe Castro
2009-08-28 18:00 ` Gilles Chanteperdrix
2009-08-28 18:04 ` Gilles Chanteperdrix [this message]
2009-08-28 19:09 ` Felipe Castro
2009-08-28 19:16 ` Gilles Chanteperdrix
2009-08-31 14:53 ` Felipe Castro
2009-08-31 15:10 ` Gilles Chanteperdrix
2009-08-31 18:36 ` Felipe Castro
[not found] ` <7a15153d0908311135o753de66ex90f835f14c506e9b@domain.hid>
2009-08-31 18:38 ` [Xenomai-help] " Gilles Chanteperdrix
2009-08-31 18:48 ` Gilles Chanteperdrix
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A981C1E.8000904@domain.hid \
--to=gilles.chanteperdrix@xenomai.org \
--cc=felipecpc1@domain.hid \
--cc=xenomai@xenomai.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.