From: Morvan Le Meut <mlemeut@gmail.com>
To: linux-media@vger.kernel.org
Subject: (EC168) PC Basic TNT USB Basic V5 ( France ) recognized but no channel tuning
Date: Wed, 02 Sep 2009 21:34:11 +0200 [thread overview]
Message-ID: <4A9EC8B3.10904@gmail.com> (raw)
Hello
I've just bough that and it seems that the EC168 driver can't work with
it ( yet )
The PCB identifies itself as a ForwardVideo "EzTV818_D.". Work with a
EC168 and a MXL5003S ( no doubt about it, but it is barely legible, and
since i've no camera, no PCB picture available ). ( and the EC168BDA.bin
firmware is provided on the CD )
A typical dmesg for it :
[19715.764919] usb 2-1.1: new high speed USB device using ehci_hcd and
address 8
[19715.873356] usb 2-1.1: configuration #1 chosen from 1 choice
[19715.878085] dvb-usb: found a 'E3C EC168 DVB-T USB2.0 reference
design' in cold state, will try to load a firmware
[19715.878096] firmware: requesting dvb-usb-ec168.fw
[19715.929889] dvb-usb: downloading firmware from file 'dvb-usb-ec168.fw'
[19715.985884] dvb-usb: found a 'E3C EC168 DVB-T USB2.0 reference
design' in warm state.
[19715.985958] dvb-usb: will pass the complete MPEG2 transport stream to
the software demuxer.
[19715.986487] DVB: registering new adapter (E3C EC168 DVB-T USB2.0
reference design)
[19715.986931] DVB: registering adapter 1 frontend 0 (E3C EC100 DVB-T)...
[19715.987045] MXL5005S: Attached at address 0xc6
[19715.987052] dvb-usb: E3C EC168 DVB-T USB2.0 reference design
successfully initialized and connected.
[19716.004730] dvb-usb: found a 'E3C EC168 DVB-T USB2.0 reference
design' in warm state.
[19716.004799] dvb-usb: will pass the complete MPEG2 transport stream to
the software demuxer.
[19716.010131] DVB: registering new adapter (E3C EC168 DVB-T USB2.0
reference design)
[19716.010499] DVB: registering adapter 2 frontend 0 (E3C EC100 DVB-T)...
[19716.010612] MXL5005S: Attached at address 0xc6
[19716.010619] dvb-usb: E3C EC168 DVB-T USB2.0 reference design
successfully initialized and connected.
[19716.010729] usb 2-1.1: New USB device found, idVendor=18b4,
idProduct=1001
[19716.010733] usb 2-1.1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
To be perfectly honest a previous attempt didn't have the "New USB
device" at the end, but the result was the same : no tuning possible (
"WARNING: >>> tuning failed!!!" ) even if there is a device file for it
in /dev/ ( on a Linux debian 2.6.26-2-686 #1 SMP Fri Aug 14 01:27:18 UTC
2009 i686 GNU/Linux with V4L/DVB driver using mercurial ). I've checked
the antenna cable ( my old Intuix S800 work perfectly in the same setup
but it does not have a remote :) )
Thanks for any info/tips.
next reply other threads:[~2009-09-02 19:34 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-09-02 19:34 Morvan Le Meut [this message]
2009-09-02 22:03 ` (EC168) PC Basic TNT USB Basic V5 ( France ) recognized but no channel tuning Antti Palosaari
2009-09-02 23:00 ` Morvan Le Meut
2009-09-02 23:12 ` hermann pitton
2009-09-03 5:40 ` Morvan Le Meut
2009-09-03 22:45 ` hermann pitton
2009-09-03 6:45 ` Morvan Le Meut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A9EC8B3.10904@gmail.com \
--to=mlemeut@gmail.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.