From: Breno Leitao <leitao@linux.vnet.ibm.com>
To: Wen Xiong <wenxiong@us.ibm.com>, scottk@digi.com
Cc: alan@lxorguk.ukuu.org.uk,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: jsm: Adding EEH handlers
Date: Fri, 11 Sep 2009 12:35:58 -0300 [thread overview]
Message-ID: <4AAA6E5E.9000900@linux.vnet.ibm.com> (raw)
Adding EEH handlers for the serial jsm driver. This patch adds
the PCI error handlers and also register them to be called when
a error is detected.
Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
---
diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c
index b3604aa..b37d2e2 100644
--- a/drivers/serial/jsm/jsm_driver.c
+++ b/drivers/serial/jsm/jsm_driver.c
@@ -48,6 +48,20 @@ struct uart_driver jsm_uart_driver = {
.nr = NR_PORTS,
};
+static pci_ers_result_t jsm_io_error_detected(struct pci_dev *pdev,
+ pci_channel_state_t state);
+static pci_ers_result_t jsm_io_slot_reset(struct pci_dev *pdev);
+static void jsm_io_resume(struct pci_dev *pdev);
+
+static struct pci_error_handlers jsm_err_handler = {
+ .error_detected = jsm_io_error_detected,
+ .slot_reset = jsm_io_slot_reset,
+ .resume = jsm_io_resume,
+};
+
int jsm_debug;
module_param(jsm_debug, int, 0);
MODULE_PARM_DESC(jsm_debug, "Driver debugging level");
@@ -164,6 +178,7 @@ static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device
}
pci_set_drvdata(pdev, brd);
+ pci_save_state(pdev);
return 0;
out_free_irq:
@@ -222,8 +237,39 @@ static struct pci_driver jsm_driver = {
.id_table = jsm_pci_tbl,
.probe = jsm_probe_one,
.remove = __devexit_p(jsm_remove_one),
+ .err_handler = &jsm_err_handler,
};
+static pci_ers_result_t jsm_io_error_detected(struct pci_dev *pdev,
+ pci_channel_state_t state)
+{
+ struct jsm_board *brd = pci_get_drvdata(pdev);
+
+ jsm_remove_uart_port(brd);
+
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+static pci_ers_result_t jsm_io_slot_reset(struct pci_dev *pdev)
+{
+ pci_enable_device(pdev);
+ pci_set_master(pdev);
+
+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+static void jsm_io_resume(struct pci_dev *pdev)
+{
+ struct jsm_board *brd = pci_get_drvdata(pdev);
+
+ pci_restore_state(pdev);
+
+ jsm_uart_port_init(brd);
+}
+
static int __init jsm_init_module(void)
{
int rc;
diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c
index 00f4577..e70f2c1 100644
--- a/drivers/serial/jsm/jsm_tty.c
+++ b/drivers/serial/jsm/jsm_tty.c
@@ -432,7 +432,7 @@ int __devinit jsm_tty_init(struct jsm_board *brd)
return 0;
}
-int __devinit jsm_uart_port_init(struct jsm_board *brd)
+int jsm_uart_port_init(struct jsm_board *brd)
{
int i;
unsigned int line;
next reply other threads:[~2009-09-11 15:36 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-09-11 15:35 Breno Leitao [this message]
2009-09-28 19:06 ` Adding EEH handlers Kilau, Scott
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4AAA6E5E.9000900@linux.vnet.ibm.com \
--to=leitao@linux.vnet.ibm.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=scottk@digi.com \
--cc=wenxiong@us.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.