From: Boaz Harrosh <bharrosh@panasas.com>
To: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: James.Bottomley@hansenpartnership.com, linux-scsi@vger.kernel.org
Subject: Re: [PATCH 4/5] sd: Support disks formatted with DIF Type 2
Date: Sun, 13 Sep 2009 12:37:50 +0300 [thread overview]
Message-ID: <4AACBD6E.60703@panasas.com> (raw)
In-Reply-To: <1252696852-17091-5-git-send-email-martin.petersen@oracle.com>
On 09/11/2009 10:20 PM, Martin K. Petersen wrote:
> Disks formatted with DIF Type 2 reject READ/WRITE 6/10/12/16 commands
> when protection is enabled. Only the 32-byte variants are supported.
>
> Implement support for issusing 32-byte READ/WRITE and enable Type 2
> drives in the protection type detection logic.
>
> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Boaz Harrosh <bharrosh@panasas.com>
> ---
> drivers/scsi/sd.c | 80 ++++++++++++++++++++++++++++++++++++++++++++-------
> drivers/scsi/sd.h | 5 +++
> include/scsi/scsi.h | 3 ++
> 3 files changed, 77 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
> index 36e2333..d138e6b 100644
> --- a/drivers/scsi/sd.c
> +++ b/drivers/scsi/sd.c
> @@ -116,6 +116,9 @@ static DEFINE_IDA(sd_index_ida);
> * object after last put) */
> static DEFINE_MUTEX(sd_ref_mutex);
>
> +struct kmem_cache *sd_cdb_cache;
> +mempool_t *sd_cdb_pool;
> +
> static const char *sd_cache_types[] = {
> "write through", "none", "write back",
> "write back, no read (daft)"
> @@ -413,6 +416,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
> sector_t threshold;
> unsigned int this_count = blk_rq_sectors(rq);
> int ret, host_dif;
> + unsigned char protect;
>
> if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
> ret = scsi_setup_blk_pc_cmnd(sdp, rq);
> @@ -545,13 +549,48 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
> /* Set RDPROTECT/WRPROTECT if disk is formatted with DIF */
> host_dif = scsi_host_dif_capable(sdp->host, sdkp->protection_type);
> if (host_dif)
> - SCpnt->cmnd[1] = 1 << 5;
> + protect = 1 << 5;
> else
> - SCpnt->cmnd[1] = 0;
> + protect = 0;
> +
> + if (host_dif == SD_DIF_TYPE2_PROTECTION) {
> + SCpnt->cmnd = mempool_alloc(sd_cdb_pool, GFP_ATOMIC);
> +
> + if (unlikely(SCpnt->cmnd == NULL)) {
> + ret = BLKPREP_DEFER;
> + goto out;
> + }
>
> - if (block > 0xffffffff) {
> + memset(SCpnt->cmnd, 0, SD_EXT_CDB_SIZE);
> + SCpnt->cmnd[0] = VARIABLE_LENGTH_CMD;
> + SCpnt->cmnd[7] = 0x18;
> + SCpnt->cmnd[9] = (rq_data_dir(rq) == READ) ? READ_32 : WRITE_32;
> + SCpnt->cmnd[10] = protect | (blk_fua_rq(rq) ? 0x8 : 0);
> +
> + /* LBA */
> + SCpnt->cmnd[12] = sizeof(block) > 4 ? (unsigned char) (block >> 56) & 0xff : 0;
> + SCpnt->cmnd[13] = sizeof(block) > 4 ? (unsigned char) (block >> 48) & 0xff : 0;
> + SCpnt->cmnd[14] = sizeof(block) > 4 ? (unsigned char) (block >> 40) & 0xff : 0;
> + SCpnt->cmnd[15] = sizeof(block) > 4 ? (unsigned char) (block >> 32) & 0xff : 0;
> + SCpnt->cmnd[16] = (unsigned char) (block >> 24) & 0xff;
> + SCpnt->cmnd[17] = (unsigned char) (block >> 16) & 0xff;
> + SCpnt->cmnd[18] = (unsigned char) (block >> 8) & 0xff;
> + SCpnt->cmnd[19] = (unsigned char) block & 0xff;
> +
> + /* Expected Indirect LBA */
> + SCpnt->cmnd[20] = (unsigned char) (block >> 24) & 0xff;
> + SCpnt->cmnd[21] = (unsigned char) (block >> 16) & 0xff;
> + SCpnt->cmnd[22] = (unsigned char) (block >> 8) & 0xff;
> + SCpnt->cmnd[23] = (unsigned char) block & 0xff;
> +
> + /* Transfer length */
> + SCpnt->cmnd[28] = (unsigned char) (this_count >> 24) & 0xff;
> + SCpnt->cmnd[29] = (unsigned char) (this_count >> 16) & 0xff;
> + SCpnt->cmnd[30] = (unsigned char) (this_count >> 8) & 0xff;
> + SCpnt->cmnd[31] = (unsigned char) this_count & 0xff;
> + } else if (block > 0xffffffff) {
> SCpnt->cmnd[0] += READ_16 - READ_6;
> - SCpnt->cmnd[1] |= blk_fua_rq(rq) ? 0x8 : 0;
> + SCpnt->cmnd[1] = protect | (blk_fua_rq(rq) ? 0x8 : 0);
> SCpnt->cmnd[2] = sizeof(block) > 4 ? (unsigned char) (block >> 56) & 0xff : 0;
> SCpnt->cmnd[3] = sizeof(block) > 4 ? (unsigned char) (block >> 48) & 0xff : 0;
> SCpnt->cmnd[4] = sizeof(block) > 4 ? (unsigned char) (block >> 40) & 0xff : 0;
> @@ -572,7 +611,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
> this_count = 0xffff;
>
> SCpnt->cmnd[0] += READ_10 - READ_6;
> - SCpnt->cmnd[1] |= blk_fua_rq(rq) ? 0x8 : 0;
> + SCpnt->cmnd[1] = protect | (blk_fua_rq(rq) ? 0x8 : 0);
> SCpnt->cmnd[2] = (unsigned char) (block >> 24) & 0xff;
> SCpnt->cmnd[3] = (unsigned char) (block >> 16) & 0xff;
> SCpnt->cmnd[4] = (unsigned char) (block >> 8) & 0xff;
> @@ -1047,6 +1086,7 @@ static int sd_done(struct scsi_cmnd *SCpnt)
> int result = SCpnt->result;
> unsigned int good_bytes = result ? 0 : scsi_bufflen(SCpnt);
> struct scsi_sense_hdr sshdr;
> + struct scsi_disk *sdkp = scsi_disk(SCpnt->request->rq_disk);
> int sense_valid = 0;
> int sense_deferred = 0;
>
> @@ -1108,6 +1148,10 @@ static int sd_done(struct scsi_cmnd *SCpnt)
> if (rq_data_dir(SCpnt->request) == READ && scsi_prot_sg_count(SCpnt))
> sd_dif_complete(SCpnt, good_bytes);
>
> + if (scsi_host_dif_capable(sdkp->device->host, sdkp->protection_type)
> + == SD_DIF_TYPE2_PROTECTION)
> + mempool_free(SCpnt->cmnd, sd_cdb_pool);
> +
> return good_bytes;
> }
>
> @@ -1271,12 +1315,7 @@ void sd_read_protection_type(struct scsi_disk *sdkp, unsigned char *buffer)
>
> sdkp->protection_type = type;
>
> - switch (type) {
> - case SD_DIF_TYPE1_PROTECTION:
> - case SD_DIF_TYPE3_PROTECTION:
> - break;
> -
> - default:
> + if (type > SD_DIF_TYPE3_PROTECTION) {
> sd_printk(KERN_ERR, sdkp, "formatted with unsupported " \
> "protection type %u. Disabling disk!\n", type);
> sdkp->capacity = 0;
> @@ -2321,8 +2360,24 @@ static int __init init_sd(void)
> if (err)
> goto err_out_class;
>
> + sd_cdb_cache = kmem_cache_create("sd_ext_cdb", SD_EXT_CDB_SIZE,
> + 0, 0, NULL);
> + if (!sd_cdb_cache) {
> + printk(KERN_ERR "sd: can't init extended cdb cache\n");
> + goto err_out_class;
> + }
> +
> + sd_cdb_pool = mempool_create_slab_pool(SD_MEMPOOL_SIZE, sd_cdb_cache);
> + if (!sd_cdb_pool) {
> + printk(KERN_ERR "sd: can't init extended cdb pool\n");
> + goto err_out_cache;
> + }
> +
> return 0;
>
> +err_out_cache:
> + kmem_cache_destroy(sd_cdb_cache);
> +
> err_out_class:
> class_unregister(&sd_disk_class);
> err_out:
> @@ -2342,6 +2397,9 @@ static void __exit exit_sd(void)
>
> SCSI_LOG_HLQUEUE(3, printk("exit_sd: exiting sd driver\n"));
>
> + mempool_destroy(sd_cdb_pool);
> + kmem_cache_destroy(sd_cdb_cache);
> +
> scsi_unregister_driver(&sd_template.gendrv);
> class_unregister(&sd_disk_class);
>
> diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h
> index ce1f5f8..e374804 100644
> --- a/drivers/scsi/sd.h
> +++ b/drivers/scsi/sd.h
> @@ -37,6 +37,11 @@
> */
> #define SD_LAST_BUGGY_SECTORS 8
>
> +enum {
> + SD_EXT_CDB_SIZE = 32, /* Extended CDB size */
> + SD_MEMPOOL_SIZE = 2, /* CDB pool size */
> +};
> +
> struct scsi_disk {
> struct scsi_driver *driver; /* always &sd_template */
> struct scsi_device *device;
> diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
> index 084478e..34c46ab 100644
> --- a/include/scsi/scsi.h
> +++ b/include/scsi/scsi.h
> @@ -129,6 +129,9 @@ struct scsi_cmnd;
> #define MI_REPORT_TARGET_PGS 0x0a
> /* values for maintenance out */
> #define MO_SET_TARGET_PGS 0x0a
> +/* values for variable length command */
> +#define READ_32 0x09
> +#define WRITE_32 0x0b
>
> /* Values for T10/04-262r7 */
> #define ATA_16 0x85 /* 16-byte pass-thru */
next prev parent reply other threads:[~2009-09-13 9:38 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-09-11 19:20 DIF/DIX updates for 2.6.32 Martin K. Petersen
2009-09-11 19:20 ` [PATCH 1/5] scsi: Deprecate SCSI_PROT_*_CONVERT operations Martin K. Petersen
2009-09-18 23:16 ` James Smart
2009-09-11 19:20 ` [PATCH 2/5] sd: Detach DIF from block integrity infrastructure Martin K. Petersen
2009-09-11 19:20 ` [PATCH 3/5] scsi: Fix protection scsi_data_buffer leak Martin K. Petersen
2009-09-13 9:36 ` Boaz Harrosh
2009-09-11 19:20 ` [PATCH 4/5] sd: Support disks formatted with DIF Type 2 Martin K. Petersen
2009-09-13 9:37 ` Boaz Harrosh [this message]
2009-09-11 19:20 ` [PATCH 5/5] scsi_debug: Implement support for " Martin K. Petersen
2009-09-11 23:06 ` Douglas Gilbert
-- strict thread matches above, loose matches on Subject: below --
2009-09-18 21:32 Final DIF/DIX patches for 2.6.32 Martin K. Petersen
2009-09-18 21:33 ` [PATCH 4/5] sd: Support disks formatted with DIF Type 2 Martin K. Petersen
2009-09-18 21:57 ` James Bottomley
2009-09-20 20:49 ` Martin K. Petersen
2009-09-04 8:36 DIF/DIX updates for 2.6.32 Martin K. Petersen
2009-09-04 8:36 ` [PATCH 4/5] sd: Support disks formatted with DIF Type 2 Martin K. Petersen
2009-08-26 6:17 DIF/DIX updates for 2.6.32 Martin K. Petersen
2009-08-26 6:18 ` [PATCH 4/5] sd: Support disks formatted with DIF Type 2 Martin K. Petersen
2009-08-26 12:26 ` Boaz Harrosh
2009-08-27 6:41 ` Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4AACBD6E.60703@panasas.com \
--to=bharrosh@panasas.com \
--cc=James.Bottomley@hansenpartnership.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.