Re: [lm-sensors] [PATCH] coretemp: Add Lynnfield CPU

[Rudolf Marek <r.marek@assembler.cz>]

Hi,

Looks good. However I would like to see the Documentation/hwmon/coretemp updated 
too.

Maybe Intel can overtake the driver maintainership because I'm quite struggling 
to get any info from Intel. Second reason is lack of free time.

Thank you,

Rudolf

Huaxu Wan napsal(a):
> Add Lynnfield processor support. Lynnfield is a quad-core Nehalem based microprocessor for Desktop market, which is introduced in September 2009.
> 
> Signed-off-by: Huaxu Wan <huaxu.wan@linux.intel.com>
> Signed-off-by: Kent Liu <kent.liu@linux.intel.com>
> ---
>  drivers/hwmon/coretemp.c |    4 ++--
>  1 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
> index 93c1722..a9a21dc 100644
> --- a/drivers/hwmon/coretemp.c
> +++ b/drivers/hwmon/coretemp.c
> @@ -413,11 +413,11 @@ static int __init coretemp_init(void)
>         for_each_online_cpu(i) {
>                 struct cpuinfo_x86 *c = &cpu_data(i);
> 
> -               /* check if family 6, models 0xe, 0xf, 0x16, 0x17, 0x1A */
> +               /* check if family 6, models 0xe, 0xf, 0x16, 0x17, 0x1A, 0x1E */
>                 if ((c->cpuid_level < 0) || (c->x86 != 0x6) ||
>                     !((c->x86_model = 0xe) || (c->x86_model = 0xf) ||
>                         (c->x86_model = 0x16) || (c->x86_model = 0x17) ||
> -                       (c->x86_model = 0x1A))) {
> +                       (c->x86_model = 0x1A) || (c->x86_model = 0x1E))) {
> 
>                         /* supported CPU not found, but report the unknown
>                            family 6 CPU */
> --

_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors