Nova S2 HD scanning problems

[Claes Lindblom <claesl@gmail.com>]

Hi all,
I have just installed my new Nova S2 HD card on ubuntu x86_64, 
2.6.28-13-generic, changed the
firmware to version 1.23.86.1 and I have also tried version 1.22.82.0. 
The result is that I can tune and watch
channels without any problems but when I try to scan for channels it 
will not work.

The card is loaded as adapter 1 so I use the following command to scan 
with the latest scan-s2
sudo ./scan-s2 -a 1 -s 0 -l UNIVERSAL dvb-s/Thor-1.0W

I have a DisEqC switch but I know it's working since I have a Azurewave 
AD SP400 card that I have scanned channels before
and also the card can tune in on both LNB's with szap-s2.

Has anyone ideas about the scanning problems?

Dmesg does not output anything.
Output of scan-s2:
----------------------------------> Using DVB-S
 >>> tune to: 11216:vC78S0:S0.0W:24500:
DVB-S IF freq is 1466000
WARNING: >>> tuning failed!!!
 >>> tune to: 11216:vC78S0:S0.0W:24500: (tuning failed)
DVB-S IF freq is 1466000
WARNING: >>> tuning failed!!!
----------------------------------> Using DVB-S2
 >>> tune to: 11216:vC78S1:S0.0W:24500:
DVB-S IF freq is 1466000
WARNING: >>> tuning failed!!!
 >>> tune to: 11216:vC78S1:S0.0W:24500: (tuning failed)
DVB-S IF freq is 1466000
WARNING: >>> tuning failed!!!


Regards
/Claes