All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Ozan Çağlayan" <ozan@pardus.org.tr>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org
Subject: Re: No sound after returning from suspend-to-ram
Date: Mon, 28 Sep 2009 12:16:46 +0300	[thread overview]
Message-ID: <4AC07EFE.2090202@pardus.org.tr> (raw)
In-Reply-To: <s5hhbun4gcw.wl%tiwai@suse.de>

Takashi Iwai wrote On 28-09-2009 11:34:
> Well, first we need to check the diff of alsa-info outputs between
> before/after suspend.  If reloading the driver helps, usually it's no
> the issue of the PCM core but rather the driver itself.
>
>   

This is the diff before/after suspend. I also wanted
before/after/unload-reload alsa-info outputs. The amp-out values may be
modified by the user just after the suspend but the unsolicited tag
isn't changeable by the user, right?

@@ -226,7 +226,7 @@
 Node 0x19 [Beep Generator Widget] wcaps 0x700200: Mono Digital
 Node 0x1a [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
   Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
-  Amp-Out vals:  [0x0a 0x0a]
+  Amp-Out vals:  [0x0c 0x0c]
   Pincap 0x0000001f: OUT HP Detect Trigger ImpSense
   Pin Default 0x01813030: [Jack] Line In at Ext Rear
     Conn = 1/8, Color = Blue
@@ -237,7 +237,7 @@
      0x0a
 Node 0x1b [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
   Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
-  Amp-Out vals:  [0x0a 0x0a]
+  Amp-Out vals:  [0x0c 0x0c]
   Pincap 0x0001001f: OUT HP EAPD Detect Trigger ImpSense
   EAPD 0x2: EAPD
   Pin Default 0x01014011: [Jack] Line Out at Ext Rear
@@ -280,7 +280,7 @@
     Conn = Analog, Color = Unknown
     DefAssociation = 0xf, Sequence = 0x0
   Pin-ctls: 0x40: OUT
-  Unsolicited: tag=0f, enabled=1
+  Unsolicited: tag=2f, enabled=1
   Connection: 1
      0x0e
 Node 0x1f [Pin Complex] wcaps 0x400081: Stereo
@@ -370,7 +370,7 @@
 crw-rw----+ 1 root audio 116,  4 Sep 23 15:32 /dev/snd/hwC0D0
 crw-rw----+ 1 root audio 116,  5 Sep 23 15:32 /dev/snd/hwC0D1
 crw-rw----+ 1 root audio 116, 24 Sep 23 18:59 /dev/snd/pcmC0D0c
-crw-rw----+ 1 root audio 116, 16 Sep 23 20:04 /dev/snd/pcmC0D0p
+crw-rw----+ 1 root audio 116, 16 Sep 23 20:34 /dev/snd/pcmC0D0p
 crw-rw----+ 1 root audio 116, 17 Sep 23 18:59 /dev/snd/pcmC0D1p
 crw-rw----+ 1 root audio 116, 30 Sep 23 15:32 /dev/snd/pcmC0D6c
 crw-rw----+ 1 root audio 116, 22 Sep 23 15:32 /dev/snd/pcmC0D6p
@@ -466,8 +466,8 @@
   Playback channels: Front Left - Front Right
   Limits: Playback 0 - 31
   Mono:
-  Front Left: Playback 10 [32%] [-31.50dB] [on]
-  Front Right: Playback 10 [32%] [-31.50dB] [on]
+  Front Left: Playback 12 [39%] [-28.50dB] [on]
+  Front Right: Playback 12 [39%] [-28.50dB] [on]
 Simple mixer control 'PCM',0
   Capabilities: pvolume pswitch
   Playback channels: Front Left - Front Right
@@ -597,8 +597,8 @@
 ·  ·   comment.dbmax 0
 ·  ·   iface MIXER
 ·  ·   name 'Master Playback Volume'
-·  ·   value.0 10
-·  ·   value.1 10
+·  ·   value.0 12
+·  ·   value.1 12
 ·  }
 ·  control.4 {
 ·  ·   comment.access 'read write'
@@ -952,5 +952,29 @@
 --
 [17038.984733] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
 [17328.304515] hda_codec: invalid CONNECT_LIST verb 12[2]:2100
+[17381.230771] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
+--
+[19218.645128] uhci_hcd 0000:00:1d.0: PCI INT A disabled
+[19218.847104] HDA Intel 0000:00:1b.0: PCI INT A disabled
+[19218.858097] HDA Intel 0000:00:1b.0: power state changed by ACPI to D3
+[19218.880064] ACPI: Preparing to enter system sleep state S3
+--
+[19218.880463] Hardware name: AMILO Pro V2045
+[19218.880464] Modules linked in: rfcomm radeon drm i2c_algo_bit sco
bridge stp bnep l2cap bluetooth ipv6 xt_state iptable_nat nf_nat
nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 vboxnetadp vboxnetflt
iptable_mangle iptable_raw microcode iptable_filter ip_tables x_tables
vboxdrv snd_hda_codec_si3054 snd_hda_codec_analog snd_hda_intel
snd_hda_codec snd_hwdep snd_seq_dummy snd_seq_oss snd_seq_midi_event
 snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm snd_timer
pcmcia snd ipw2200 libipw video tifm_sd iTCO_wdt soundcore lib80211
iTCO_vendor_support ppdev output snd_page_alloc yenta_socket rsrc_n
onstatic r8169 pcmcia_core parport_pc tifm_7xx1 tifm_core lp intel_agp
parport agpgart mii serio_raw pcspkr joydev brd pata_acpi sdhci_pci
sdhci mmc_core led_class ohci1394 ieee1394 ata_piix ahci ata_gen
eric libata firewire_ohci firewire_core
+[19218.880530] Pid: 4018, comm: pm-suspend Not tainted 2.6.30.5-126 #1
+--
+[19218.924201] pcieport-driver 0000:00:01.0: restoring config space at
offset 0x3 (was 0x10000, writing 0x10008)
+[19218.924241] HDA Intel 0000:00:1b.0: restoring config space at offset
0x4 (was 0xd000c004, writing 0xb0000004)
+[19218.924247] HDA Intel 0000:00:1b.0: restoring config space at offset
0x3 (was 0x0, writing 0x8)
+[19218.924255] HDA Intel 0000:00:1b.0: restoring config space at offset
0x1 (was 0x100006, writing 0x100002)
+[19218.924285] pcieport-driver 0000:00:1c.0: restoring config space at
offset 0xf (was 0x40100, writing 0x4010b)
+--
+[19218.925149] sdhci-pci 0000:06:09.4: restoring config space at offset
0x1 (was 0x2100000, writing 0x2100106)
+[19219.772226] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
+[19219.772234] HDA Intel 0000:00:1b.0: setting latency timer to 64
+[19220.140249] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
+--
+[19255.960448] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
+[19262.099609] hda_codec: invalid CONNECT_LIST verb 12[2]:2100
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

  reply	other threads:[~2009-09-28  9:12 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-09-23 18:20 No sound after returning from suspend-to-ram Ozan Çağlayan
2009-09-24  7:30 ` Takashi Iwai
2009-09-24 19:03   ` Ozan Çağlayan
2009-09-28  8:34     ` Takashi Iwai
2009-09-28  9:16       ` Ozan Çağlayan [this message]
2009-09-28  9:18         ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4AC07EFE.2090202@pardus.org.tr \
    --to=ozan@pardus.org.tr \
    --cc=alsa-devel@alsa-project.org \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.