From: Roman Pisl <rpisl@domain.hid>
To: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
Cc: xenomai@xenomai.org
Subject: Re: [Xenomai-help] Freeze on SMP x86-64
Date: Fri, 02 Oct 2009 15:22:53 +0200 [thread overview]
Message-ID: <4AC5FEAD.7000608@domain.hid> (raw)
In-Reply-To: <4AC5F49E.3070608@domain.hid>
[-- Attachment #1: Type: text/plain, Size: 1125 bytes --]
On 2.10.2009 14:39, Gilles Chanteperdrix wrote:
> Roman Pisl wrote:
>> Hello,
>> I just tried x86-64 SMP Linux/Xenomai on my workstation (Intel Core2
>> Quad) but it freezes immediately after latency test or clocktest is
>> started. It freezes even during the boot, when Xenomai debbuging is
>> enabled.
>>
>> The same kernel binary runs seamlessly in KVM on the same machine.
>>
>> When I completely disable ACPI, the kernel recognizes only one CPU and
>> the latency test works.
>>
>> The same configuration but for 32bit x86 also runs without freeze.
>>
>> Do you have any ideas?
>
> Yes. As we repeated many times.
> Tell us the versions of Xenomai and of the I-pipe patch you use.
> Send us your .config
> Manage to get the kernel console output (using a serial cable connected
> to another PC, or the netconsole, some people even used to send us
> photos about kernel crashes).
>
I send dmesg output for both 32 and 64 bit. Unfortunately it just
freezes with no kernel panic output. When Xenomai debugging is enabled,
the kernel freezes after Xenomai is initialized (last message: Xenomai:
starting RTDM services).
[-- Attachment #2: dmesg.raw32.xenomai --]
[-- Type: text/plain, Size: 55775 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31.1-xenomai (root@crane-k) (gcc version 4.4.1 (Gentoo 4.4.1 p1.0) ) #27 SMP Thu Oct 1 14:45:52 CEST 2009
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009a000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cd9ffc00 (usable)
[ 0.000000] BIOS-e820: 00000000cd9ffc00 - 00000000cda53c00 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cda53c00 - 00000000cda55c00 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cda55c00 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000128000000 (usable)
[ 0.000000] DMI 2.5 present.
[ 0.000000] last_pfn = 0xcd9ff max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D7FFF write-protect
[ 0.000000] D8000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0CDC00000 mask FFFC00000 uncachable
[ 0.000000] 1 base 0CE000000 mask FFE000000 uncachable
[ 0.000000] 2 base 0CDB00000 mask FFFF00000 uncachable
[ 0.000000] 3 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] ACPI: RSDP 000fec00 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 000fc7cb 00074 (v01 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: FACP 000fc8fb 000F4 (v03 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: DSDT ffe9cff8 054AD (v01 DELL dt_ex 00001000 INTL 20050624)
[ 0.000000] ACPI: FACS cd9ffc00 00040
[ 0.000000] ACPI: SSDT ffea25c4 000AA (v01 DELL st_ex 00001000 INTL 20050624)
[ 0.000000] ACPI: APIC 000fc9ef 00092 (v01 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: BOOT 000fca81 00028 (v01 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: ASF! 000fcaa9 00096 (v32 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: MCFG 000fcb3f 0003E (v01 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: HPET 000fcb7d 00038 (v01 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: TCPA 000fcdd9 00032 (v01 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: DMAR 000fce0b 00120 (v01 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: SLIC 000fcbb5 00176 (v01 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2402MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 000164c7cc] TEXT DATA BSS ==> [0001000000 - 000164c7cc]
[ 0.000000] #4 [000009a000 - 0000100000] BIOS reserved ==> [000009a000 - 0000100000]
[ 0.000000] #5 [000164d000 - 00016531a0] BRK ==> [000164d000 - 00016531a0]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] found SMP MP-table at [c00fe710] fe710
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000cd9ff
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009a
[ 0.000000] 0: 0x00000100 -> 0x000cd9ff
[ 0.000000] On node 0 totalpages: 842137
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3962 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4805 pages used for memmap
[ 0.000000] HighMem zone: 610108 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] 8 Processors exceeds NR_CPUS limit of 4
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:10000000)
[ 0.000000] NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c3065000, static data 36060 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 835556
[ 0.000000] Kernel command line: root=/dev/sda6
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Initializing HighMem for node 0 (000377fe:000cd9ff)
[ 0.000000] Memory: 3333372k/3368956k available (3631k kernel code, 34204k reserved, 1580k data, 324k init, 2459652k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff6b000 - 0xfffff000 ( 592 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc1517000 - 0xc1568000 ( 324 kB)
[ 0.000000] .data : 0xc138bddb - 0xc1516fec (1580 kB)
[ 0.000000] .text : 0xc1000000 - 0xc138bddb (3631 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:384
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2659.877 MHz processor.
[ 0.000040] I-pipe 2.4-05: pipeline enabled.
[ 0.001515] Console: colour VGA+ 80x25
[ 0.001517] console [tty0] enabled
[ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 5319.75 BogoMIPS (lpj=10639508)
[ 0.004169] Mount-cache hash table entries: 512
[ 0.004334] Initializing cgroup subsys ns
[ 0.004406] Initializing cgroup subsys cpuacct
[ 0.004479] Initializing cgroup subsys freezer
[ 0.004558] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004661] CPU: L2 cache: 3072K
[ 0.004730] CPU: Physical Processor ID: 0
[ 0.004800] CPU: Processor Core ID: 0
[ 0.004870] mce: CPU supports 6 MCE banks
[ 0.004945] CPU0: Thermal monitoring enabled (TM2)
[ 0.005022] Performance Counters: Core2 events, Intel PMU driver.
[ 0.005162] ... version: 2
[ 0.005232] ... bit width: 40
[ 0.005302] ... generic counters: 2
[ 0.005372] ... value mask: 000000ffffffffff
[ 0.005446] ... max period: 000000007fffffff
[ 0.005519] ... fixed-purpose counters: 3
[ 0.005589] ... counter mask: 0000000700000003
[ 0.005664] Checking 'hlt' instruction... OK.
[ 0.020484] ACPI: Core revision 20090521
[ 0.259694] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.260001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.260001] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.260001] ..... (found apic 0 pin 2) ...
[ 0.303358] ....... works.
[ 0.303425] CPU0: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a
[ 0.304001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 5320.29 BogoMIPS (lpj=10640596)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 3072K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] mce: CPU supports 6 MCE banks
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.389335] CPU1: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a
[ 0.390145] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.392070] Booting processor 2 APIC 0x2 ip 0x6000
[ 0.004000] Initializing CPU#2
[ 0.004000] Calibrating delay using timer specific routine.. 5320.32 BogoMIPS (lpj=10640641)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 3072K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 2
[ 0.004000] mce: CPU supports 6 MCE banks
[ 0.004000] CPU2: Thermal monitoring enabled (TM2)
[ 0.004000] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
[ 0.485394] CPU2: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a
[ 0.486198] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.488068] Booting processor 3 APIC 0x3 ip 0x6000
[ 0.004000] Initializing CPU#3
[ 0.004000] Calibrating delay using timer specific routine.. 5320.31 BogoMIPS (lpj=10640639)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 3072K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 3
[ 0.004000] mce: CPU supports 6 MCE banks
[ 0.004000] CPU3: Thermal monitoring enabled (TM2)
[ 0.004000] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
[ 0.581344] CPU3: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a
[ 0.582761] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.584017] Brought up 4 CPUs
[ 0.584092] Total of 4 processors activated (21280.69 BogoMIPS).
[ 0.584228] NET: Registered protocol family 16
[ 0.588076] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.588121] ACPI: bus type pci registered
[ 0.588200] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.588277] PCI: MCFG area at e0000000 reserved in E820
[ 0.588350] PCI: Using MMCONFIG for extended config space
[ 0.588423] PCI: Using configuration type 1 for base access
[ 0.596617] bio: create slab <bio-0> at 0
[ 0.596617] ACPI: EC: Look up EC in DSDT
[ 0.659030] ACPI: BIOS _OSI(Linux) query ignored
[ 0.686364] ACPI: Interpreter enabled
[ 0.686434] ACPI: (supports S0 S5)
[ 0.686563] ACPI: Using IOAPIC for interrupt routing
[ 0.792364] ACPI Warning: Incorrect checksum in table [TCPA] - 00, should be 7F 20090521 tbutils-246
[ 0.797461] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.804794] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.804900] pci 0000:00:02.0: reg 10 64bit mmio: [0xfe800000-0xfebfffff]
[ 0.804900] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.804900] pci 0000:00:02.0: reg 20 io port: [0xec90-0xec97]
[ 0.804900] pci 0000:00:02.1: reg 10 64bit mmio: [0xfe700000-0xfe7fffff]
[ 0.804900] pci 0000:00:03.0: reg 10 64bit mmio: [0xfeda6000-0xfeda600f]
[ 0.804900] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.804900] pci 0000:00:03.0: PME# disabled
[ 0.804900] pci 0000:00:03.2: reg 10 io port: [0xfe80-0xfe87]
[ 0.804900] pci 0000:00:03.2: reg 14 io port: [0xfe90-0xfe93]
[ 0.804900] pci 0000:00:03.2: reg 18 io port: [0xfea0-0xfea7]
[ 0.804900] pci 0000:00:03.2: reg 1c io port: [0xfeb0-0xfeb3]
[ 0.804900] pci 0000:00:03.2: reg 20 io port: [0xfef0-0xfeff]
[ 0.804900] pci 0000:00:03.3: reg 10 io port: [0xec98-0xec9f]
[ 0.804900] pci 0000:00:03.3: reg 14 32bit mmio: [0xfe6d8000-0xfe6d8fff]
[ 0.804900] pci 0000:00:19.0: reg 10 32bit mmio: [0xfe6e0000-0xfe6fffff]
[ 0.804900] pci 0000:00:19.0: reg 14 32bit mmio: [0xfe6d9000-0xfe6d9fff]
[ 0.804900] pci 0000:00:19.0: reg 18 io port: [0xecc0-0xecdf]
[ 0.804900] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.804900] pci 0000:00:19.0: PME# disabled
[ 0.804900] pci 0000:00:1a.0: reg 20 io port: [0xff20-0xff3f]
[ 0.804900] pci 0000:00:1a.1: reg 20 io port: [0xff00-0xff1f]
[ 0.804900] pci 0000:00:1a.2: reg 20 io port: [0xfc00-0xfc1f]
[ 0.804941] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe6da000-0xfe6da3ff]
[ 0.804989] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.805061] pci 0000:00:1a.7: PME# disabled
[ 0.805159] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe6dc000-0xfe6dffff]
[ 0.805195] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.805265] pci 0000:00:1b.0: PME# disabled
[ 0.805377] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.805448] pci 0000:00:1c.0: PME# disabled
[ 0.805561] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.805631] pci 0000:00:1c.1: PME# disabled
[ 0.805744] pci 0000:00:1d.0: reg 20 io port: [0xff80-0xff9f]
[ 0.805803] pci 0000:00:1d.1: reg 20 io port: [0xff60-0xff7f]
[ 0.805863] pci 0000:00:1d.2: reg 20 io port: [0xff40-0xff5f]
[ 0.805926] pci 0000:00:1d.7: reg 10 32bit mmio: [0xff980000-0xff9803ff]
[ 0.805974] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.806045] pci 0000:00:1d.7: PME# disabled
[ 0.806261] pci 0000:00:1f.2: reg 10 io port: [0xfe00-0xfe07]
[ 0.806266] pci 0000:00:1f.2: reg 14 io port: [0xfe10-0xfe13]
[ 0.806271] pci 0000:00:1f.2: reg 18 io port: [0xfe20-0xfe27]
[ 0.806276] pci 0000:00:1f.2: reg 1c io port: [0xfe30-0xfe33]
[ 0.806282] pci 0000:00:1f.2: reg 20 io port: [0xfec0-0xfedf]
[ 0.806287] pci 0000:00:1f.2: reg 24 32bit mmio: [0xff970000-0xff9707ff]
[ 0.806313] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.806382] pci 0000:00:1f.2: PME# disabled
[ 0.806470] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfe6db000-0xfe6db0ff]
[ 0.806482] pci 0000:00:1f.3: reg 20 io port: [0xece0-0xecff]
[ 0.806531] pci 0000:00:1c.0: bridge 32bit mmio: [0xfe500000-0xfe5fffff]
[ 0.806569] pci 0000:00:1c.1: bridge 32bit mmio: [0xfe400000-0xfe4fffff]
[ 0.806601] pci 0000:03:00.0: reg 10 32bit mmio: [0xfe3fe000-0xfe3fefff]
[ 0.806642] pci 0000:03:00.0: supports D1 D2
[ 0.806643] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.806714] pci 0000:03:00.0: PME# disabled
[ 0.808034] pci 0000:03:02.0: reg 10 io port: [0xdc00-0xdcff]
[ 0.808040] pci 0000:03:02.0: reg 14 32bit mmio: [0xfe3ff000-0xfe3ff0ff]
[ 0.808078] pci 0000:03:02.0: supports D1 D2
[ 0.808080] pci 0000:03:02.0: PME# supported from D1 D2 D3hot D3cold
[ 0.808151] pci 0000:03:02.0: PME# disabled
[ 0.808252] pci 0000:00:1e.0: transparent bridge
[ 0.808331] pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff]
[ 0.808335] pci 0000:00:1e.0: bridge 32bit mmio: [0xfe300000-0xfe3fffff]
[ 0.808351] pci_bus 0000:00: on NUMA node 0
[ 0.808354] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.808897] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
[ 0.809254] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
[ 0.809537] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT]
[ 2.257695] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 2.257745] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 2.260997] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 2.262161] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 2.263326] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 2.264607] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 2.265770] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 2.266941] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 2.267564] SCSI subsystem initialized
[ 2.268034] libata version 3.00 loaded.
[ 2.268034] usbcore: registered new interface driver usbfs
[ 2.268093] usbcore: registered new interface driver hub
[ 2.268093] usbcore: registered new device driver usb
[ 2.268093] PCI: Using ACPI for IRQ routing
[ 2.292005] pnp: PnP ACPI init
[ 2.292077] ACPI: bus type pnp registered
[ 2.341737] pnp: PnP ACPI: found 9 devices
[ 2.341803] ACPI: ACPI bus type pnp unregistered
[ 2.341884] system 00:01: ioport range 0x800-0x85f has been reserved
[ 2.341954] system 00:01: ioport range 0xc00-0xc7f has been reserved
[ 2.342025] system 00:01: ioport range 0x860-0x8ff has been reserved
[ 2.377190] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[ 2.377259] pci 0000:00:1c.0: IO window: disabled
[ 2.377329] pci 0000:00:1c.0: MEM window: 0xfe500000-0xfe5fffff
[ 2.377399] pci 0000:00:1c.0: PREFETCH window: disabled
[ 2.377469] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 2.377537] pci 0000:00:1c.1: IO window: disabled
[ 2.377606] pci 0000:00:1c.1: MEM window: 0xfe400000-0xfe4fffff
[ 2.377687] pci 0000:00:1c.1: PREFETCH window: disabled
[ 2.377756] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 2.377826] pci 0000:00:1e.0: IO window: 0xd000-0xdfff
[ 2.377897] pci 0000:00:1e.0: MEM window: 0xfe300000-0xfe3fffff
[ 2.377968] pci 0000:00:1e.0: PREFETCH window: disabled
[ 2.378044] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.378116] pci 0000:00:1c.0: setting latency timer to 64
[ 2.378123] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.378195] pci 0000:00:1c.1: setting latency timer to 64
[ 2.378200] pci 0000:00:1e.0: setting latency timer to 64
[ 2.378203] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 2.378205] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 2.378207] pci_bus 0000:01: resource 1 mem: [0xfe500000-0xfe5fffff]
[ 2.378210] pci_bus 0000:02: resource 1 mem: [0xfe400000-0xfe4fffff]
[ 2.378212] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
[ 2.378214] pci_bus 0000:03: resource 1 mem: [0xfe300000-0xfe3fffff]
[ 2.378216] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 2.378218] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
[ 2.378228] NET: Registered protocol family 2
[ 2.378309] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 2.378425] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 2.378791] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 2.378990] TCP: Hash tables configured (established 131072 bind 65536)
[ 2.379060] TCP reno registered
[ 2.379159] NET: Registered protocol family 1
[ 2.379363] Simple Boot Flag at 0x7a set to 0x1
[ 2.380986] audit: initializing netlink socket (disabled)
[ 2.381060] type=2000 audit(1254479895.379:1): initialized
[ 2.384836] I-pipe: Domain Xenomai registered.
[ 2.385002] Xenomai: hal/i386 started.
[ 2.385091] Xenomai: scheduling class idle registered.
[ 2.385159] Xenomai: scheduling class rt registered.
[ 2.387263] Xenomai: real-time nucleus v2.5-rc3 (Flying In A Blue Dream) loaded.
[ 2.387363] Xenomai: debug mode enabled.
[ 2.387588] Xenomai: starting native API services.
[ 2.387655] Xenomai: starting POSIX services.
[ 2.387744] Xenomai: starting RTDM services.
[ 2.388060] highmem bounce pool size: 64 pages
[ 2.388129] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 2.392034] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 2.392709] fuse init (API version 7.12)
[ 2.393079] msgmni has been set to 1708
[ 2.393492] alg: No test for stdrng (krng)
[ 2.393709] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.393811] io scheduler noop registered
[ 2.393877] io scheduler anticipatory registered
[ 2.393944] io scheduler deadline registered
[ 2.394097] io scheduler cfq registered (default)
[ 2.394172] pci 0000:00:02.0: Boot video device
[ 2.394182] pci 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0080
[ 2.394183] pci 0000:00:1a.0: Performing full reset
[ 2.394198] pci 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0080
[ 2.394199] pci 0000:00:1a.1: Performing full reset
[ 2.394214] pci 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0080
[ 2.394215] pci 0000:00:1a.2: Performing full reset
[ 2.394243] pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0080
[ 2.394245] pci 0000:00:1d.0: Performing full reset
[ 2.394259] pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0080
[ 2.394261] pci 0000:00:1d.1: Performing full reset
[ 2.394275] pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0080
[ 2.394276] pci 0000:00:1d.2: Performing full reset
[ 2.394451] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 2.394458] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 2.394728] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 2.394735] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 2.395091] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.399269] Non-volatile memory driver v1.3
[ 2.399336] Linux agpgart interface v0.103
[ 2.399412] agpgart-intel 0000:00:00.0: Intel Q45/Q43 Chipset
[ 2.400297] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
[ 2.402517] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 2.402713] [drm] Initialized drm 1.1.0 20060810
[ 2.402793] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.402865] i915 0000:00:02.0: setting latency timer to 64
[ 2.405357] i915 0000:00:02.0: irq 26 for MSI/MSI-X
[ 3.702407] [drm] TMDS-8: set mode 1920x1080 13
[ 3.871574] Switched to high resolution mode on CPU 1
[ 3.871577] Switched to high resolution mode on CPU 2
[ 3.871583] Switched to high resolution mode on CPU 3
[ 3.875560] Switched to high resolution mode on CPU 0
[ 3.935314] Console: switching to colour frame buffer device 240x67
[ 3.940952] [drm] fb0: inteldrmfb frame buffer device
[ 3.940986] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.941099] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 4.196125] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 4.196772] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 4.196931] serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 4.197061] 0000:00:03.3: ttyS1 at I/O 0xec98 (irq = 17) is a 16550A
[ 4.199194] brd: module loaded
[ 4.200218] loop: module loaded
[ 4.200555] ahci 0000:00:1f.2: version 3.0
[ 4.200565] ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.200621] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[ 4.200674] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x2f impl RAID mode
[ 4.200715] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio ems
[ 4.200759] ahci 0000:00:1f.2: setting latency timer to 64
[ 4.240051] scsi0 : ahci
[ 4.240248] scsi1 : ahci
[ 4.240451] scsi2 : ahci
[ 4.240656] scsi3 : ahci
[ 4.240860] scsi4 : ahci
[ 4.241065] scsi5 : ahci
[ 4.242675] ata1: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970100 irq 27
[ 4.242713] ata2: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970180 irq 27
[ 4.242750] ata3: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970200 irq 27
[ 4.242786] ata4: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970280 irq 27
[ 4.242822] ata5: DUMMY
[ 4.242836] ata6: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq 27
[ 4.243179] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
[ 4.243212] Copyright (c) 1999-2006 Intel Corporation.
[ 4.243311] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 4.243341] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 4.243388] e1000e 0000:00:19.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 4.243424] e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb
[ 4.243462] e1000e 0000:00:19.0: setting latency timer to 64
[ 4.243525] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[ 4.356560] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:24:e8:39:3c:95
[ 4.356598] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 4.356661] 0000:00:19.0: eth0: MAC: 8, PHY: 8, PBA No: 2021ff-0ff
[ 4.356750] Intel(R) Gigabit Ethernet Network Driver - version 1.3.16-k2
[ 4.356784] Copyright (c) 2007-2009 Intel Corporation.
[ 4.356863] Intel(R) Virtual Function Network Driver - version 1.0.0-k0
[ 4.356896] Copyright (c) 2009 Intel Corporation.
[ 4.356982] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 4.357032] 8139cp 0000:03:02.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 4.357129] tun: Universal TUN/TAP device driver, 1.6
[ 4.357155] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 4.358355] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.359382] ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96
[ 4.359397] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 4.360466] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 4.360469] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 4.361564] drivers/usb/core/inode.c: creating file 'devices'
[ 4.361567] drivers/usb/core/inode.c: creating file '001'
[ 4.361637] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 4.362735] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
[ 4.362739] ehci_hcd 0000:00:1a.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
[ 4.362751] ehci_hcd 0000:00:1a.7: reset command 000002 (park)=0 ithresh=0 period=1024 Reset HALT
[ 4.366648] ehci_hcd 0000:00:1a.7: debug port 1
[ 4.367752] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 4.367754] ehci_hcd 0000:00:1a.7: supports USB remote wakeup
[ 4.367764] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe6da000
[ 4.368916] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 4.372782] ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
[ 4.384006] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 4.385219] usb usb1: default language 0x0409
[ 4.385226] usb usb1: udev 1, busnum 1, minor = 0
[ 4.385228] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.386384] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.387567] usb usb1: Product: EHCI Host Controller
[ 4.388784] usb usb1: Manufacturer: Linux 2.6.31.1-xenomai ehci_hcd
[ 4.390005] usb usb1: SerialNumber: 0000:00:1a.7
[ 4.391251] usb usb1: uevent
[ 4.391310] usb usb1: usb_probe_device
[ 4.391312] usb usb1: configuration #1 chosen from 1 choice
[ 4.392568] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 4.392578] usb 1-0:1.0: uevent
[ 4.392632] hub 1-0:1.0: usb_probe_interface
[ 4.392634] hub 1-0:1.0: usb_probe_interface - got id
[ 4.392636] hub 1-0:1.0: USB hub found
[ 4.393904] hub 1-0:1.0: 6 ports detected
[ 4.395165] hub 1-0:1.0: standalone hub
[ 4.395167] hub 1-0:1.0: no power switching (usb 1.0)
[ 4.395168] hub 1-0:1.0: individual port over-current protection
[ 4.395170] hub 1-0:1.0: power on to power good time: 20ms
[ 4.395174] hub 1-0:1.0: local power source is good
[ 4.395176] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 4.395198] drivers/usb/core/inode.c: creating file '001'
[ 4.395219] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 4.396538] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 4.396541] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.397869] drivers/usb/core/inode.c: creating file '002'
[ 4.397935] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 4.399285] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
[ 4.399288] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
[ 4.399301] ehci_hcd 0000:00:1d.7: reset command 000002 (park)=0 ithresh=0 period=1024 Reset HALT
[ 4.403178] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.404530] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 4.404532] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[ 4.404542] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff980000
[ 4.405889] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 4.409768] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
[ 4.420010] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 4.421400] usb usb2: default language 0x0409
[ 4.421406] usb usb2: udev 1, busnum 2, minor = 128
[ 4.421408] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.422728] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.424076] usb usb2: Product: EHCI Host Controller
[ 4.425406] usb usb2: Manufacturer: Linux 2.6.31.1-xenomai ehci_hcd
[ 4.426712] usb usb2: SerialNumber: 0000:00:1d.7
[ 4.428038] usb usb2: uevent
[ 4.428092] usb usb2: usb_probe_device
[ 4.428094] usb usb2: configuration #1 chosen from 1 choice
[ 4.429396] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 4.429406] usb 2-0:1.0: uevent
[ 4.429461] hub 2-0:1.0: usb_probe_interface
[ 4.429463] hub 2-0:1.0: usb_probe_interface - got id
[ 4.429465] hub 2-0:1.0: USB hub found
[ 4.430743] hub 2-0:1.0: 6 ports detected
[ 4.432025] hub 2-0:1.0: standalone hub
[ 4.432027] hub 2-0:1.0: no power switching (usb 1.0)
[ 4.432028] hub 2-0:1.0: individual port over-current protection
[ 4.432030] hub 2-0:1.0: power on to power good time: 20ms
[ 4.432034] hub 2-0:1.0: local power source is good
[ 4.432035] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 4.432059] drivers/usb/core/inode.c: creating file '001'
[ 4.432123] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.433435] ohci_hcd: block sizes: ed 64 td 64
[ 4.433496] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.434808] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.436102] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 4.436105] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 4.437388] drivers/usb/core/inode.c: creating file '003'
[ 4.437455] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 4.438756] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 4.440063] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 4.440065] uhci_hcd 0000:00:1a.0: Performing full reset
[ 4.440077] uhci_hcd 0000:00:1a.0: supports USB remote wakeup
[ 4.440087] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
[ 4.441429] usb usb3: default language 0x0409
[ 4.441435] usb usb3: udev 1, busnum 3, minor = 256
[ 4.441437] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.442778] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.444166] usb usb3: Product: UHCI Host Controller
[ 4.445517] usb usb3: Manufacturer: Linux 2.6.31.1-xenomai uhci_hcd
[ 4.446878] usb usb3: SerialNumber: 0000:00:1a.0
[ 4.448281] usb usb3: uevent
[ 4.448337] usb usb3: usb_probe_device
[ 4.448339] usb usb3: configuration #1 chosen from 1 choice
[ 4.449744] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 4.449756] usb 3-0:1.0: uevent
[ 4.449809] hub 3-0:1.0: usb_probe_interface
[ 4.449811] hub 3-0:1.0: usb_probe_interface - got id
[ 4.449813] hub 3-0:1.0: USB hub found
[ 4.451187] hub 3-0:1.0: 2 ports detected
[ 4.452550] hub 3-0:1.0: standalone hub
[ 4.452552] hub 3-0:1.0: no power switching (usb 1.0)
[ 4.452553] hub 3-0:1.0: individual port over-current protection
[ 4.452555] hub 3-0:1.0: power on to power good time: 2ms
[ 4.452559] hub 3-0:1.0: local power source is good
[ 4.452561] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 4.452571] drivers/usb/core/inode.c: creating file '001'
[ 4.452592] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 4.453984] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 4.453986] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 4.455344] drivers/usb/core/inode.c: creating file '004'
[ 4.455416] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 4.456789] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 4.458152] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 4.458154] uhci_hcd 0000:00:1a.1: Performing full reset
[ 4.458166] uhci_hcd 0000:00:1a.1: supports USB remote wakeup
[ 4.458176] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00
[ 4.459536] usb usb4: default language 0x0409
[ 4.459542] usb usb4: udev 1, busnum 4, minor = 384
[ 4.459544] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.460907] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.462280] usb usb4: Product: UHCI Host Controller
[ 4.463616] usb usb4: Manufacturer: Linux 2.6.31.1-xenomai uhci_hcd
[ 4.464983] usb usb4: SerialNumber: 0000:00:1a.1
[ 4.466349] usb usb4: uevent
[ 4.466405] usb usb4: usb_probe_device
[ 4.466406] usb usb4: configuration #1 chosen from 1 choice
[ 4.467737] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 4.467747] usb 4-0:1.0: uevent
[ 4.467803] hub 4-0:1.0: usb_probe_interface
[ 4.467805] hub 4-0:1.0: usb_probe_interface - got id
[ 4.467806] hub 4-0:1.0: USB hub found
[ 4.469147] hub 4-0:1.0: 2 ports detected
[ 4.470450] hub 4-0:1.0: standalone hub
[ 4.470451] hub 4-0:1.0: no power switching (usb 1.0)
[ 4.470453] hub 4-0:1.0: individual port over-current protection
[ 4.470455] hub 4-0:1.0: power on to power good time: 2ms
[ 4.470458] hub 4-0:1.0: local power source is good
[ 4.470460] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 4.470471] drivers/usb/core/inode.c: creating file '001'
[ 4.470491] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 4.471815] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 4.471818] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 4.473140] drivers/usb/core/inode.c: creating file '005'
[ 4.473205] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 4.474513] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 4.475794] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 4.475796] uhci_hcd 0000:00:1a.2: Performing full reset
[ 4.475808] uhci_hcd 0000:00:1a.2: supports USB remote wakeup
[ 4.475812] uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000fc00
[ 4.477124] usb usb5: default language 0x0409
[ 4.477129] usb usb5: udev 1, busnum 5, minor = 512
[ 4.477131] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.478413] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.479692] usb usb5: Product: UHCI Host Controller
[ 4.480972] usb usb5: Manufacturer: Linux 2.6.31.1-xenomai uhci_hcd
[ 4.482255] usb usb5: SerialNumber: 0000:00:1a.2
[ 4.483554] usb usb5: uevent
[ 4.483613] usb usb5: usb_probe_device
[ 4.483615] usb usb5: configuration #1 chosen from 1 choice
[ 4.484911] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 4.484921] usb 5-0:1.0: uevent
[ 4.484973] hub 5-0:1.0: usb_probe_interface
[ 4.484975] hub 5-0:1.0: usb_probe_interface - got id
[ 4.484976] hub 5-0:1.0: USB hub found
[ 4.486268] hub 5-0:1.0: 2 ports detected
[ 4.487528] hub 5-0:1.0: standalone hub
[ 4.487530] hub 5-0:1.0: no power switching (usb 1.0)
[ 4.487531] hub 5-0:1.0: individual port over-current protection
[ 4.487533] hub 5-0:1.0: power on to power good time: 2ms
[ 4.487536] hub 5-0:1.0: local power source is good
[ 4.487538] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 4.487549] drivers/usb/core/inode.c: creating file '001'
[ 4.487568] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 4.488862] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 4.488865] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.490157] drivers/usb/core/inode.c: creating file '006'
[ 4.490221] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 4.491507] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 4.492791] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 4.492793] uhci_hcd 0000:00:1d.0: Performing full reset
[ 4.492805] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
[ 4.492809] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80
[ 4.494104] usb usb6: default language 0x0409
[ 4.494110] usb usb6: udev 1, busnum 6, minor = 640
[ 4.494112] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.495400] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.496717] usb usb6: Product: UHCI Host Controller
[ 4.498005] usb usb6: Manufacturer: Linux 2.6.31.1-xenomai uhci_hcd
[ 4.499288] usb usb6: SerialNumber: 0000:00:1d.0
[ 4.500608] usb usb6: uevent
[ 4.500631] ehci_hcd 0000:00:1a.7: GetStatus port 5 status 001803 POWER sig=j CSC CONNECT
[ 4.500634] hub 1-0:1.0: port 5: status 0501 change 0001
[ 4.500641] ehci_hcd 0000:00:1a.7: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT
[ 4.500644] hub 1-0:1.0: port 6: status 0501 change 0001
[ 4.500654] usb usb6: usb_probe_device
[ 4.500656] usb usb6: configuration #1 chosen from 1 choice
[ 4.501947] usb usb6: adding 6-0:1.0 (config #1, interface 0)
[ 4.501957] usb 6-0:1.0: uevent
[ 4.502012] hub 6-0:1.0: usb_probe_interface
[ 4.502014] hub 6-0:1.0: usb_probe_interface - got id
[ 4.502016] hub 6-0:1.0: USB hub found
[ 4.503299] hub 6-0:1.0: 2 ports detected
[ 4.504573] hub 6-0:1.0: standalone hub
[ 4.504574] hub 6-0:1.0: no power switching (usb 1.0)
[ 4.504576] hub 6-0:1.0: individual port over-current protection
[ 4.504577] hub 6-0:1.0: power on to power good time: 2ms
[ 4.504581] hub 6-0:1.0: local power source is good
[ 4.504582] hub 6-0:1.0: trying to enable port power on non-switchable hub
[ 4.504593] drivers/usb/core/inode.c: creating file '001'
[ 4.504613] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 4.505912] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 4.505915] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.507194] drivers/usb/core/inode.c: creating file '007'
[ 4.507268] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 4.508565] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 4.509851] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 4.509853] uhci_hcd 0000:00:1d.1: Performing full reset
[ 4.509865] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
[ 4.509869] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
[ 4.511165] usb usb7: default language 0x0409
[ 4.511171] usb usb7: udev 1, busnum 7, minor = 768
[ 4.511173] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.512480] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.513808] usb usb7: Product: UHCI Host Controller
[ 4.515111] usb usb7: Manufacturer: Linux 2.6.31.1-xenomai uhci_hcd
[ 4.516415] usb usb7: SerialNumber: 0000:00:1d.1
[ 4.517726] usb usb7: uevent
[ 4.517782] usb usb7: usb_probe_device
[ 4.517784] usb usb7: configuration #1 chosen from 1 choice
[ 4.519068] usb usb7: adding 7-0:1.0 (config #1, interface 0)
[ 4.519078] usb 7-0:1.0: uevent
[ 4.519136] hub 7-0:1.0: usb_probe_interface
[ 4.519138] hub 7-0:1.0: usb_probe_interface - got id
[ 4.519140] hub 7-0:1.0: USB hub found
[ 4.520430] hub 7-0:1.0: 2 ports detected
[ 4.521703] hub 7-0:1.0: standalone hub
[ 4.521705] hub 7-0:1.0: no power switching (usb 1.0)
[ 4.521706] hub 7-0:1.0: individual port over-current protection
[ 4.521708] hub 7-0:1.0: power on to power good time: 2ms
[ 4.521711] hub 7-0:1.0: local power source is good
[ 4.521713] hub 7-0:1.0: trying to enable port power on non-switchable hub
[ 4.521724] drivers/usb/core/inode.c: creating file '001'
[ 4.521744] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.523042] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 4.523045] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.524354] drivers/usb/core/inode.c: creating file '008'
[ 4.524417] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 4.525728] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 4.527006] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 4.527008] uhci_hcd 0000:00:1d.2: Performing full reset
[ 4.527020] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
[ 4.527029] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[ 4.528337] usb usb8: default language 0x0409
[ 4.528343] usb usb8: udev 1, busnum 8, minor = 896
[ 4.528345] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.529636] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.530943] usb usb8: Product: UHCI Host Controller
[ 4.532259] usb usb8: Manufacturer: Linux 2.6.31.1-xenomai uhci_hcd
[ 4.533564] usb usb8: SerialNumber: 0000:00:1d.2
[ 4.534868] usb usb8: uevent
[ 4.534910] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 4.534934] usb usb8: usb_probe_device
[ 4.534936] usb usb8: configuration #1 chosen from 1 choice
[ 4.536230] usb usb8: adding 8-0:1.0 (config #1, interface 0)
[ 4.536240] usb 8-0:1.0: uevent
[ 4.536291] hub 8-0:1.0: usb_probe_interface
[ 4.536293] hub 8-0:1.0: usb_probe_interface - got id
[ 4.536294] hub 8-0:1.0: USB hub found
[ 4.537596] hub 8-0:1.0: 2 ports detected
[ 4.538860] hub 8-0:1.0: standalone hub
[ 4.538861] hub 8-0:1.0: no power switching (usb 1.0)
[ 4.538863] hub 8-0:1.0: individual port over-current protection
[ 4.538865] hub 8-0:1.0: power on to power good time: 2ms
[ 4.538868] hub 8-0:1.0: local power source is good
[ 4.538870] hub 8-0:1.0: trying to enable port power on non-switchable hub
[ 4.538880] drivers/usb/core/inode.c: creating file '001'
[ 4.539012] usbcore: registered new interface driver usblp
[ 4.540303] Initializing USB Mass Storage driver...
[ 4.541690] usbcore: registered new interface driver usb-storage
[ 4.542973] USB Mass Storage support registered.
[ 4.544346] usbcore: registered new interface driver libusual
[ 4.545853] PNP: No PS/2 controller found. Probing ports directly.
[ 4.549734] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.551031] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.552025] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 4.552431] mice: PS/2 mouse device common for all mice
[ 4.553900] rtc_cmos 00:05: RTC can wake from S4
[ 4.555246] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 4.556552] rtc0: alarms up to one day, 242 bytes nvram
[ 4.557909] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.559324] cpuidle: using governor ladder
[ 4.560627] cpuidle: using governor menu
[ 4.561522] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.561538] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.561549] ata3: SATA link down (SStatus 4 SControl 300)
[ 4.561563] ata4: SATA link down (SStatus 4 SControl 300)
[ 4.561575] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.568336] ata2.00: ATAPI: PLDS DVD+/-RW DH-16AAS, JD12, max UDMA/100, ATAPI AN
[ 4.569960] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 4.570044] usbcore: registered new interface driver hiddev
[ 4.571359] usbcore: registered new interface driver usbhid
[ 4.572627] usbhid: v2.6:USB HID core driver
[ 4.572645] ata2.00: configured for UDMA/100
[ 4.575276] Netfilter messages via NETLINK v0.30.
[ 4.576534] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 4.577940] ctnetlink v0.93: registering with nfnetlink.
[ 4.579246] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.580515] TCP cubic registered
[ 4.580567] ata2: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x0
[ 4.580569] ata2: irq_stat 0x40000008
[ 4.584331] Initializing XFRM netlink socket
[ 4.585874] NET: Registered protocol family 10
[ 4.587252] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 4.588010] uhci_hcd 0000:00:1a.2: port 1 portsc 008a,00
[ 4.588019] uhci_hcd 0000:00:1a.2: port 2 portsc 008a,00
[ 4.588396] ata1.00: ATA-8: ST3500418AS, CC44, max UDMA/133
[ 4.588399] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 4.591099] IPv6 over IPv4 tunneling driver
[ 4.592457] NET: Registered protocol family 17
[ 4.594010] RPC: Registered udp transport module.
[ 4.595251] RPC: Registered tcp transport module.
[ 4.596488] Using IPI No-Shortcut mode
[ 4.604012] hub 1-0:1.0: state 7 ports 6 chg 0060 evt 0000
[ 4.604021] hub 1-0:1.0: port 5, status 0501, change 0000, 480 Mb/s
[ 4.627805] ata1.00: configured for UDMA/133
[ 4.629107] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xf t4
[ 4.630333] ata1: irq_stat 0x00400040, connection status changed
[ 4.631560] ata1: hard resetting link
[ 4.656198] ehci_hcd 0000:00:1a.7: port 5 full speed --> companion
[ 4.656201] ehci_hcd 0000:00:1a.7: GetStatus port 5 status 003801 POWER OWNER sig=j CONNECT
[ 4.656204] hub 1-0:1.0: port 5 not reset yet, waiting 50ms
[ 4.712011] ehci_hcd 0000:00:1a.7: GetStatus port 5 status 003002 POWER OWNER sig=se0 CSC
[ 4.712028] hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s
[ 4.712033] ehci_hcd 0000:00:1a.7: port 6 low speed --> companion
[ 4.768009] ehci_hcd 0000:00:1a.7: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC
[ 4.768024] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 4.768028] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 4.768032] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 4.768036] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 4.768042] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002
[ 4.768049] uhci_hcd 0000:00:1a.2: port 1 portsc 0093,00
[ 4.768055] hub 5-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
[ 4.896011] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
[ 5.008009] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 5.144006] usb 5-1: ep0 maxpacket = 8
[ 5.181173] usb 5-1: skipped 1 descriptor after interface
[ 5.181176] usb 5-1: skipped 1 descriptor after interface
[ 5.186167] usb 5-1: default language 0x0409
[ 5.205166] usb 5-1: udev 2, busnum 5, minor = 513
[ 5.205168] usb 5-1: New USB device found, idVendor=413c, idProduct=2101
[ 5.206481] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.207737] usb 5-1: Product: Dell Smart Card Reader Keyboard
[ 5.209007] usb 5-1: Manufacturer: Dell
[ 5.210267] usb 5-1: uevent
[ 5.210327] usb 5-1: usb_probe_device
[ 5.210329] usb 5-1: configuration #1 chosen from 1 choice
[ 5.214170] usb 5-1: adding 5-1:1.0 (config #1, interface 0)
[ 5.214185] usb 5-1:1.0: uevent
[ 5.214231] usbhid 5-1:1.0: usb_probe_interface
[ 5.214233] usbhid 5-1:1.0: usb_probe_interface - got id
[ 5.219449] input: Dell Dell Smart Card Reader Keyboard as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input0
[ 5.220755] uhci_hcd 0000:00:1a.2: reserve dev 2 ep81-INT, period 16, phase 8, 17 us
[ 5.220875] generic-usb 0003:413C:2101.0001: input,hidraw0: USB HID v1.11 Keyboard [Dell Dell Smart Card Reader Keyboard] on usb-0000:00:1a.2-1/input0
[ 5.222277] usb 5-1: adding 5-1:1.1 (config #1, interface 1)
[ 5.222287] usb 5-1:1.1: uevent
[ 5.222363] drivers/usb/core/inode.c: creating file '002'
[ 5.222377] uhci_hcd 0000:00:1a.2: port 2 portsc 01a3,00
[ 5.222383] hub 5-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s
[ 5.352011] hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301
[ 5.352016] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.419706] ata1.00: configured for UDMA/133
[ 5.421089] ata1: EH complete
[ 5.436091] scsi 0:0:0:0: Direct-Access ATA ST3500418AS CC44 PQ: 0 ANSI: 5
[ 5.437749] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 5.437785] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.440511] sd 0:0:0:0: [sda] Write Protect is off
[ 5.440865] scsi 1:0:0:0: CD-ROM PLDS DVD+-RW DH-16AAS JD12 PQ: 0 ANSI: 5
[ 5.443325] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.443348] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.444844] sda:sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.448341] Uniform CD-ROM driver Revision: 3.20
[ 5.449885] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.450004] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.454674] sda1 sda2 sda3 sda4 <
[ 5.468008] usb 5-2: new low speed USB device using uhci_hcd and address 3
[ 5.480775] sda5 sda6 >
[ 5.501194] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.518222] kjournald starting. Commit interval 5 seconds
[ 5.518228] EXT3-fs: mounted filesystem with writeback data mode.
[ 5.518236] VFS: Mounted root (ext3 filesystem) readonly on device 8:6.
[ 5.522581] Freeing unused kernel memory: 324k freed
[ 5.608011] usb usb3: suspend_rh (auto-stop)
[ 5.608030] usb usb4: suspend_rh (auto-stop)
[ 5.608048] usb usb6: suspend_rh (auto-stop)
[ 5.608066] usb usb7: suspend_rh (auto-stop)
[ 5.608084] usb usb8: suspend_rh (auto-stop)
[ 5.626190] usb 5-2: skipped 1 descriptor after interface
[ 5.631187] usb 5-2: default language 0x0409
[ 5.640190] usb 5-2: udev 3, busnum 5, minor = 514
[ 5.640193] usb 5-2: New USB device found, idVendor=0461, idProduct=4d51
[ 5.641683] usb 5-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 5.643117] usb 5-2: Product: DELL Laser Mouse
[ 5.644594] usb 5-2: uevent
[ 5.644671] usb 5-2: usb_probe_device
[ 5.644673] usb 5-2: configuration #1 chosen from 1 choice
[ 5.648194] usb 5-2: adding 5-2:1.0 (config #1, interface 0)
[ 5.648210] usb 5-2:1.0: uevent
[ 5.648287] usbhid 5-2:1.0: usb_probe_interface
[ 5.648289] usbhid 5-2:1.0: usb_probe_interface - got id
[ 5.662445] input: DELL Laser Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input/input1
[ 5.664157] generic-usb 0003:0461:4D51.0002: input,hidraw1: USB HID v1.11 Mouse [DELL Laser Mouse] on usb-0000:00:1a.2-2/input0
[ 5.665713] drivers/usb/core/inode.c: creating file '003'
[ 5.665725] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 6.269993] udev: starting version 141
[ 6.281666] usb usb3: uevent
[ 6.281679] usb 3-0:1.0: uevent
[ 6.281713] usb usb4: uevent
[ 6.281725] usb 4-0:1.0: uevent
[ 6.281758] usb usb5: uevent
[ 6.281770] usb 5-0:1.0: uevent
[ 6.281784] usb 5-1: uevent
[ 6.281796] usb 5-1:1.0: uevent
[ 6.281868] usb 5-1:1.1: uevent
[ 6.281882] usb 5-2: uevent
[ 6.281894] usb 5-2:1.0: uevent
[ 6.281988] usb usb1: uevent
[ 6.282000] usb 1-0:1.0: uevent
[ 6.282125] usb usb6: uevent
[ 6.282137] usb 6-0:1.0: uevent
[ 6.282169] usb usb7: uevent
[ 6.282181] usb 7-0:1.0: uevent
[ 6.282213] usb usb8: uevent
[ 6.282225] usb 8-0:1.0: uevent
[ 6.282257] usb usb2: uevent
[ 6.282270] usb 2-0:1.0: uevent
[ 6.296835] usb 5-2:1.0: uevent
[ 6.296869] usb 5-1:1.0: uevent
[ 6.296914] usb 5-2: uevent
[ 6.296945] usb 5-1: uevent
[ 6.299259] usb 5-2:1.0: uevent
[ 6.299318] usb 5-2: uevent
[ 6.781519] hub 2-0:1.0: hub_suspend
[ 6.781527] usb usb2: bus auto-suspend
[ 6.781529] ehci_hcd 0000:00:1d.7: suspend root hub
[ 6.781548] hub 3-0:1.0: hub_suspend
[ 6.781552] usb usb3: bus auto-suspend
[ 6.781554] usb usb3: suspend_rh
[ 6.781568] hub 4-0:1.0: hub_suspend
[ 6.781571] usb usb4: bus auto-suspend
[ 6.781574] usb usb4: suspend_rh
[ 6.781587] hub 6-0:1.0: hub_suspend
[ 6.781590] usb usb6: bus auto-suspend
[ 6.781592] usb usb6: suspend_rh
[ 6.781605] hub 7-0:1.0: hub_suspend
[ 6.781608] usb usb7: bus auto-suspend
[ 6.781610] usb usb7: suspend_rh
[ 6.781623] hub 8-0:1.0: hub_suspend
[ 6.781626] usb usb8: bus auto-suspend
[ 6.781629] usb usb8: suspend_rh
[ 6.781642] hub 1-0:1.0: hub_suspend
[ 6.781645] usb usb1: bus auto-suspend
[ 6.781647] ehci_hcd 0000:00:1a.7: suspend root hub
[ 7.227189] EXT3 FS on sda6, internal journal
[-- Attachment #3: dmesg.raw64.xenomai --]
[-- Type: text/plain, Size: 57183 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31.1-xenomai (root@crane-k) (gcc version 4.4.1 (Gentoo 4.4.1 p1.0) ) #29 SMP Fri Oct 2 10:33:28 CEST 2009
[ 0.000000] Command line: root=/dev/sda3
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009a000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cd9ffc00 (usable)
[ 0.000000] BIOS-e820: 00000000cd9ffc00 - 00000000cda53c00 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cda53c00 - 00000000cda55c00 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cda55c00 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000128000000 (usable)
[ 0.000000] DMI 2.5 present.
[ 0.000000] last_pfn = 0x128000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D7FFF write-protect
[ 0.000000] D8000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0CDC00000 mask FFFC00000 uncachable
[ 0.000000] 1 base 0CE000000 mask FFE000000 uncachable
[ 0.000000] 2 base 0CDB00000 mask FFFF00000 uncachable
[ 0.000000] 3 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xcd9ff max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cd9ff000
[ 0.000000] 0000000000 - 00cd800000 page 2M
[ 0.000000] 00cd800000 - 00cd9ff000 page 4k
[ 0.000000] kernel direct mapping tables up to cd9ff000 @ 8000-e000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000128000000
[ 0.000000] 0100000000 - 0128000000 page 2M
[ 0.000000] kernel direct mapping tables up to 128000000 @ c000-12000
[ 0.000000] ACPI: RSDP 00000000000fec00 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000000fc7cb 00074 (v01 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: FACP 00000000000fc8fb 000F4 (v03 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: DSDT 00000000ffe9cff8 054AD (v01 DELL dt_ex 00001000 INTL 20050624)
[ 0.000000] ACPI: FACS 00000000cd9ffc00 00040
[ 0.000000] ACPI: SSDT 00000000ffea25c4 000AA (v01 DELL st_ex 00001000 INTL 20050624)
[ 0.000000] ACPI: APIC 00000000000fc9ef 00092 (v01 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: BOOT 00000000000fca81 00028 (v01 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: ASF! 00000000000fcaa9 00096 (v32 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: MCFG 00000000000fcb3f 0003E (v01 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: HPET 00000000000fcb7d 00038 (v01 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: TCPA 00000000000fcdd9 00032 (v01 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: DMAR 00000000000fce0b 00120 (v01 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: SLIC 00000000000fcbb5 00176 (v01 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0128000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 000179fe94] TEXT DATA BSS ==> [0001000000 - 000179fe94]
[ 0.000000] #3 [000009a000 - 0000100000] BIOS reserved ==> [000009a000 - 0000100000]
[ 0.000000] #4 [00017a0000 - 00017a01f0] BRK ==> [00017a0000 - 00017a01f0]
[ 0.000000] #5 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
[ 0.000000] #6 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000]
[ 0.000000] found SMP MP-table at [ffff8800000fe710] fe710
[ 0.000000] [ffffea0000000000-ffffea00041fffff] PMD -> [ffff880028600000-ffff88002bdfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00128000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009a
[ 0.000000] 0: 0x00000100 -> 0x000cd9ff
[ 0.000000] 0: 0x00100000 -> 0x00128000
[ 0.000000] On node 0 totalpages: 1005977
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 110 pages reserved
[ 0.000000] DMA zone: 3828 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 823863 pages, LIFO batch:31
[ 0.000000] Normal zone: 2240 pages used for memmap
[ 0.000000] Normal zone: 161600 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] 8 Processors exceeds NR_CPUS limit of 4
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:10000000)
[ 0.000000] NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages at ffff880028022000, static data 93792 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 989291
[ 0.000000] Kernel command line: root=/dev/sda3
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] Memory: 3884988k/4849664k available (4261k kernel code, 825756k absent, 137952k reserved, 2043k data, 432k init)
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:384
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2660.468 MHz processor.
[ 0.000043] I-pipe 2.4-05: pipeline enabled.
[ 0.003100] Console: colour VGA+ 80x25
[ 0.003102] console [tty0] enabled
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 8 timers in total, 4 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.93 BogoMIPS (lpj=10641872)
[ 0.004000] Mount-cache hash table entries: 256
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 3072K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] mce: CPU supports 6 MCE banks
[ 0.004000] CPU0: Thermal monitoring enabled (TM2)
[ 0.004000] Performance Counters: Core2 events, Intel PMU driver.
[ 0.004000] ... version: 2
[ 0.004000] ... bit width: 40
[ 0.004000] ... generic counters: 2
[ 0.004000] ... value mask: 000000ffffffffff
[ 0.004000] ... max period: 000000007fffffff
[ 0.004000] ... fixed-purpose counters: 3
[ 0.004000] ... counter mask: 0000000700000003
[ 0.004000] Freeing SMP alternatives: 36k freed
[ 0.004000] ACPI: Core revision 20090521
[ 0.241510] Setting APIC routing to flat
[ 0.241910] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.244001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.244001] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.244001] ..... (found apic 0 pin 2) ...
[ 0.285704] ....... works.
[ 0.285797] CPU0: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a
[ 0.288001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 5319.97 BogoMIPS (lpj=10639955)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 3072K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] mce: CPU supports 6 MCE banks
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.373204] CPU1: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a
[ 0.374319] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.376074] Booting processor 2 APIC 0x2 ip 0x6000
[ 0.004000] Initializing CPU#2
[ 0.004000] Calibrating delay using timer specific routine.. 5320.00 BogoMIPS (lpj=10640003)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 3072K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 2
[ 0.004000] mce: CPU supports 6 MCE banks
[ 0.004000] CPU2: Thermal monitoring enabled (TM2)
[ 0.004000] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
[ 0.469270] CPU2: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a
[ 0.470367] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.472060] Booting processor 3 APIC 0x3 ip 0x6000
[ 0.004000] Initializing CPU#3
[ 0.004000] Calibrating delay using timer specific routine.. 5320.01 BogoMIPS (lpj=10640031)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 3072K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 3
[ 0.004000] mce: CPU supports 6 MCE banks
[ 0.004000] CPU3: Thermal monitoring enabled (TM2)
[ 0.004000] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
[ 0.565199] CPU3: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a
[ 0.566297] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.568017] Brought up 4 CPUs
[ 0.568130] Total of 4 processors activated (21280.93 BogoMIPS).
[ 0.568318] NET: Registered protocol family 16
[ 0.572054] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.573885] ACPI: bus type pci registered
[ 0.573985] PCI: Using configuration type 1 for base access
[ 0.580059] bio: create slab <bio-0> at 0
[ 0.580407] ACPI: EC: Look up EC in DSDT
[ 0.647768] ACPI: BIOS _OSI(Linux) query ignored
[ 0.675404] ACPI: Interpreter enabled
[ 0.675499] ACPI: (supports S0 S5)
[ 0.675653] ACPI: Using IOAPIC for interrupt routing
[ 0.780421] ACPI Warning: Incorrect checksum in table [TCPA] - 00, should be 7F 20090521 tbutils-246
[ 0.786351] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.795886] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.796049] pci 0000:00:02.0: reg 10 64bit mmio: [0xfe800000-0xfebfffff]
[ 0.796054] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.796058] pci 0000:00:02.0: reg 20 io port: [0xec90-0xec97]
[ 0.796085] pci 0000:00:02.1: reg 10 64bit mmio: [0xfe700000-0xfe7fffff]
[ 0.796150] pci 0000:00:03.0: reg 10 64bit mmio: [0xfeda6000-0xfeda600f]
[ 0.796207] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.796304] pci 0000:00:03.0: PME# disabled
[ 0.796421] pci 0000:00:03.2: reg 10 io port: [0xfe80-0xfe87]
[ 0.796426] pci 0000:00:03.2: reg 14 io port: [0xfe90-0xfe93]
[ 0.796431] pci 0000:00:03.2: reg 18 io port: [0xfea0-0xfea7]
[ 0.796435] pci 0000:00:03.2: reg 1c io port: [0xfeb0-0xfeb3]
[ 0.796439] pci 0000:00:03.2: reg 20 io port: [0xfef0-0xfeff]
[ 0.796480] pci 0000:00:03.3: reg 10 io port: [0xec98-0xec9f]
[ 0.796485] pci 0000:00:03.3: reg 14 32bit mmio: [0xfe6d8000-0xfe6d8fff]
[ 0.796601] pci 0000:00:19.0: reg 10 32bit mmio: [0xfe6e0000-0xfe6fffff]
[ 0.796606] pci 0000:00:19.0: reg 14 32bit mmio: [0xfe6d9000-0xfe6d9fff]
[ 0.796611] pci 0000:00:19.0: reg 18 io port: [0xecc0-0xecdf]
[ 0.796644] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.796739] pci 0000:00:19.0: PME# disabled
[ 0.796890] pci 0000:00:1a.0: reg 20 io port: [0xff20-0xff3f]
[ 0.796948] pci 0000:00:1a.1: reg 20 io port: [0xff00-0xff1f]
[ 0.797006] pci 0000:00:1a.2: reg 20 io port: [0xfc00-0xfc1f]
[ 0.797068] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe6da000-0xfe6da3ff]
[ 0.797115] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.797211] pci 0000:00:1a.7: PME# disabled
[ 0.797332] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe6dc000-0xfe6dffff]
[ 0.797367] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.797462] pci 0000:00:1b.0: PME# disabled
[ 0.797596] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.797690] pci 0000:00:1c.0: PME# disabled
[ 0.797826] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.797920] pci 0000:00:1c.1: PME# disabled
[ 0.798056] pci 0000:00:1d.0: reg 20 io port: [0xff80-0xff9f]
[ 0.798116] pci 0000:00:1d.1: reg 20 io port: [0xff60-0xff7f]
[ 0.798175] pci 0000:00:1d.2: reg 20 io port: [0xff40-0xff5f]
[ 0.798237] pci 0000:00:1d.7: reg 10 32bit mmio: [0xff980000-0xff9803ff]
[ 0.798284] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.798379] pci 0000:00:1d.7: PME# disabled
[ 0.798617] pci 0000:00:1f.2: reg 10 io port: [0xfe00-0xfe07]
[ 0.798622] pci 0000:00:1f.2: reg 14 io port: [0xfe10-0xfe13]
[ 0.798626] pci 0000:00:1f.2: reg 18 io port: [0xfe20-0xfe27]
[ 0.798631] pci 0000:00:1f.2: reg 1c io port: [0xfe30-0xfe33]
[ 0.798636] pci 0000:00:1f.2: reg 20 io port: [0xfec0-0xfedf]
[ 0.798641] pci 0000:00:1f.2: reg 24 32bit mmio: [0xff970000-0xff9707ff]
[ 0.798667] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.798759] pci 0000:00:1f.2: PME# disabled
[ 0.798871] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfe6db000-0xfe6db0ff]
[ 0.798882] pci 0000:00:1f.3: reg 20 io port: [0xece0-0xecff]
[ 0.798934] pci 0000:00:1c.0: bridge 32bit mmio: [0xfe500000-0xfe5fffff]
[ 0.798973] pci 0000:00:1c.1: bridge 32bit mmio: [0xfe400000-0xfe4fffff]
[ 0.799005] pci 0000:03:00.0: reg 10 32bit mmio: [0xfe3fe000-0xfe3fefff]
[ 0.799045] pci 0000:03:00.0: supports D1 D2
[ 0.799047] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.799142] pci 0000:03:00.0: PME# disabled
[ 0.799260] pci 0000:03:02.0: reg 10 io port: [0xdc00-0xdcff]
[ 0.799266] pci 0000:03:02.0: reg 14 32bit mmio: [0xfe3ff000-0xfe3ff0ff]
[ 0.799303] pci 0000:03:02.0: supports D1 D2
[ 0.799305] pci 0000:03:02.0: PME# supported from D1 D2 D3hot D3cold
[ 0.799400] pci 0000:03:02.0: PME# disabled
[ 0.799527] pci 0000:00:1e.0: transparent bridge
[ 0.799619] pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff]
[ 0.799623] pci 0000:00:1e.0: bridge 32bit mmio: [0xfe300000-0xfe3fffff]
[ 0.799638] pci_bus 0000:00: on NUMA node 0
[ 0.799642] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.800308] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
[ 0.800689] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
[ 0.800998] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT]
[ 2.253860] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 2.256377] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 2.257591] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 2.258804] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 2.260014] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 2.261342] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 2.262553] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 2.263755] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 2.264406] SCSI subsystem initialized
[ 2.264406] libata version 3.00 loaded.
[ 2.264406] usbcore: registered new interface driver usbfs
[ 2.264406] usbcore: registered new interface driver hub
[ 2.264406] usbcore: registered new device driver usb
[ 2.264406] PCI: Using ACPI for IRQ routing
[ 2.280018] hpet: hpet2 irq 24 for MSI
[ 2.280020] hpet: hpet3 irq 25 for MSI
[ 2.284057] hpet: hpet4 irq 26 for MSI
[ 2.288023] hpet: hpet5 irq 27 for MSI
[ 2.292014] Switched to high resolution mode on CPU 0
[ 2.294104] Switched to high resolution mode on CPU 3
[ 2.294203] Switched to high resolution mode on CPU 2
[ 2.294481] Switched to high resolution mode on CPU 1
[ 2.304008] pnp: PnP ACPI init
[ 2.304106] ACPI: bus type pnp registered
[ 2.356435] pnp: PnP ACPI: found 9 devices
[ 2.356527] ACPI: ACPI bus type pnp unregistered
[ 2.356623] system 00:01: ioport range 0x800-0x85f has been reserved
[ 2.356718] system 00:01: ioport range 0xc00-0xc7f has been reserved
[ 2.356813] system 00:01: ioport range 0x860-0x8ff has been reserved
[ 2.362064] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[ 2.362157] pci 0000:00:1c.0: IO window: disabled
[ 2.362251] pci 0000:00:1c.0: MEM window: 0xfe500000-0xfe5fffff
[ 2.362346] pci 0000:00:1c.0: PREFETCH window: disabled
[ 2.362441] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 2.362534] pci 0000:00:1c.1: IO window: disabled
[ 2.362627] pci 0000:00:1c.1: MEM window: 0xfe400000-0xfe4fffff
[ 2.362722] pci 0000:00:1c.1: PREFETCH window: disabled
[ 2.362816] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 2.362910] pci 0000:00:1e.0: IO window: 0xd000-0xdfff
[ 2.363006] pci 0000:00:1e.0: MEM window: 0xfe300000-0xfe3fffff
[ 2.363101] pci 0000:00:1e.0: PREFETCH window: disabled
[ 2.363202] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.363299] pci 0000:00:1c.0: setting latency timer to 64
[ 2.363305] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.363401] pci 0000:00:1c.1: setting latency timer to 64
[ 2.363406] pci 0000:00:1e.0: setting latency timer to 64
[ 2.363409] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 2.363412] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 2.363414] pci_bus 0000:01: resource 1 mem: [0xfe500000-0xfe5fffff]
[ 2.363416] pci_bus 0000:02: resource 1 mem: [0xfe400000-0xfe4fffff]
[ 2.363418] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
[ 2.363420] pci_bus 0000:03: resource 1 mem: [0xfe300000-0xfe3fffff]
[ 2.363422] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 2.363423] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 2.363435] NET: Registered protocol family 2
[ 2.363545] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 2.363888] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 2.365298] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 2.365823] TCP: Hash tables configured (established 262144 bind 65536)
[ 2.365918] TCP reno registered
[ 2.366090] NET: Registered protocol family 1
[ 2.366373] Simple Boot Flag at 0x7a set to 0x1
[ 2.368128] audit: initializing netlink socket (disabled)
[ 2.368228] type=2000 audit(1254479680.365:1): initialized
[ 2.371076] I-pipe: Domain Xenomai registered.
[ 2.371256] Xenomai: hal/x86_64 started.
[ 2.371363] Xenomai: scheduling class idle registered.
[ 2.371454] Xenomai: scheduling class rt registered.
[ 2.373676] Xenomai: real-time nucleus v2.5-rc3 (Flying In A Blue Dream) loaded.
[ 2.374009] Xenomai: starting native API services.
[ 2.374104] Xenomai: starting POSIX services.
[ 2.374225] Xenomai: starting RTDM services.
[ 2.374640] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.378881] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 2.379575] fuse init (API version 7.12)
[ 2.379923] msgmni has been set to 7589
[ 2.380821] alg: No test for stdrng (krng)
[ 2.381102] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.381251] io scheduler noop registered
[ 2.381340] io scheduler anticipatory registered
[ 2.381431] io scheduler deadline registered
[ 2.381540] io scheduler cfq registered (default)
[ 2.381637] pci 0000:00:02.0: Boot video device
[ 2.381648] pci 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0080
[ 2.381649] pci 0000:00:1a.0: Performing full reset
[ 2.381664] pci 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0080
[ 2.381666] pci 0000:00:1a.1: Performing full reset
[ 2.381680] pci 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0080
[ 2.381681] pci 0000:00:1a.2: Performing full reset
[ 2.381714] pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0080
[ 2.381716] pci 0000:00:1d.0: Performing full reset
[ 2.381730] pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0080
[ 2.381731] pci 0000:00:1d.1: Performing full reset
[ 2.381745] pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0080
[ 2.381747] pci 0000:00:1d.2: Performing full reset
[ 2.381928] pcieport-driver 0000:00:1c.0: irq 28 for MSI/MSI-X
[ 2.381936] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 2.382106] pcieport-driver 0000:00:1c.1: irq 29 for MSI/MSI-X
[ 2.382113] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 2.382344] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.386370] Non-volatile memory driver v1.3
[ 2.386460] Linux agpgart interface v0.103
[ 2.386561] agpgart-intel 0000:00:00.0: Intel Q45/Q43 Chipset
[ 2.387532] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
[ 2.389817] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 2.390054] [drm] Initialized drm 1.1.0 20060810
[ 2.390160] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.390257] i915 0000:00:02.0: setting latency timer to 64
[ 2.403088] i915 0000:00:02.0: irq 30 for MSI/MSI-X
[ 3.058611] [drm] TMDS-8: set mode 1920x1080 13
[ 3.288779] Console: switching to colour frame buffer device 240x67
[ 3.293093] [drm] fb0: inteldrmfb frame buffer device
[ 3.293123] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.293228] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.548141] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.548731] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.548897] serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.549020] 0000:00:03.3: ttyS1 at I/O 0xec98 (irq = 17) is a 16550A
[ 3.551420] brd: module loaded
[ 3.552550] loop: module loaded
[ 3.552918] ahci 0000:00:1f.2: version 3.0
[ 3.552930] ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.552998] ahci 0000:00:1f.2: irq 31 for MSI/MSI-X
[ 3.553049] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x2f impl RAID mode
[ 3.553082] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio ems
[ 3.553109] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.592051] scsi0 : ahci
[ 3.592251] scsi1 : ahci
[ 3.592435] scsi2 : ahci
[ 3.592616] scsi3 : ahci
[ 3.592799] scsi4 : ahci
[ 3.592982] scsi5 : ahci
[ 3.594602] ata1: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970100 irq 31
[ 3.594632] ata2: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970180 irq 31
[ 3.594661] ata3: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970200 irq 31
[ 3.594690] ata4: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970280 irq 31
[ 3.594719] ata5: DUMMY
[ 3.594731] ata6: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq 31
[ 3.595077] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
[ 3.595109] Copyright (c) 1999-2006 Intel Corporation.
[ 3.595187] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 3.595216] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 3.595259] e1000e 0000:00:19.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 3.595289] e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb
[ 3.595319] e1000e 0000:00:19.0: setting latency timer to 64
[ 3.595384] e1000e 0000:00:19.0: irq 32 for MSI/MSI-X
[ 3.704578] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:24:e8:39:3c:95
[ 3.704608] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 3.704665] 0000:00:19.0: eth0: MAC: 8, PHY: 8, PBA No: 2021ff-0ff
[ 3.704749] Intel(R) Gigabit Ethernet Network Driver - version 1.3.16-k2
[ 3.704776] Copyright (c) 2007-2009 Intel Corporation.
[ 3.704854] Intel(R) Virtual Function Network Driver - version 1.0.0-k0
[ 3.704880] Copyright (c) 2009 Intel Corporation.
[ 3.704970] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 3.704996] 8139cp 0000:03:02.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 3.705086] tun: Universal TUN/TAP device driver, 1.6
[ 3.705107] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 3.706148] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.707010] ehci_hcd: block sizes: qh 192 qtd 96 itd 192 sitd 96
[ 3.707024] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 3.707919] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 3.707922] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 3.708851] drivers/usb/core/inode.c: creating file 'devices'
[ 3.708854] drivers/usb/core/inode.c: creating file '001'
[ 3.708925] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 3.709853] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
[ 3.709856] ehci_hcd 0000:00:1a.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
[ 3.709870] ehci_hcd 0000:00:1a.7: reset command 000002 (park)=0 ithresh=0 period=1024 Reset HALT
[ 3.713744] ehci_hcd 0000:00:1a.7: debug port 1
[ 3.714667] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 3.714669] ehci_hcd 0000:00:1a.7: supports USB remote wakeup
[ 3.714679] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe6da000
[ 3.715615] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 3.719503] ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
[ 3.728017] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 3.729033] usb usb1: default language 0x0409
[ 3.729043] usb usb1: udev 1, busnum 1, minor = 0
[ 3.729045] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.730029] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.731015] usb usb1: Product: EHCI Host Controller
[ 3.732025] usb usb1: Manufacturer: Linux 2.6.31.1-xenomai ehci_hcd
[ 3.733045] usb usb1: SerialNumber: 0000:00:1a.7
[ 3.734110] usb usb1: uevent
[ 3.734171] usb usb1: usb_probe_device
[ 3.734173] usb usb1: configuration #1 chosen from 1 choice
[ 3.735219] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 3.735230] usb 1-0:1.0: uevent
[ 3.735289] hub 1-0:1.0: usb_probe_interface
[ 3.735291] hub 1-0:1.0: usb_probe_interface - got id
[ 3.735292] hub 1-0:1.0: USB hub found
[ 3.736361] hub 1-0:1.0: 6 ports detected
[ 3.737443] hub 1-0:1.0: standalone hub
[ 3.737445] hub 1-0:1.0: no power switching (usb 1.0)
[ 3.737446] hub 1-0:1.0: individual port over-current protection
[ 3.737448] hub 1-0:1.0: power on to power good time: 20ms
[ 3.737451] hub 1-0:1.0: local power source is good
[ 3.737453] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 3.737478] drivers/usb/core/inode.c: creating file '001'
[ 3.737498] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.738613] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.738615] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.739742] drivers/usb/core/inode.c: creating file '002'
[ 3.739817] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 3.740958] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
[ 3.740961] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
[ 3.740973] ehci_hcd 0000:00:1d.7: reset command 000002 (park)=0 ithresh=0 period=1024 Reset HALT
[ 3.744869] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.746000] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 3.746002] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[ 3.746011] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff980000
[ 3.747126] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 3.750992] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
[ 3.760017] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.761179] usb usb2: default language 0x0409
[ 3.761185] usb usb2: udev 1, busnum 2, minor = 128
[ 3.761187] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.762309] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.763414] usb usb2: Product: EHCI Host Controller
[ 3.764546] usb usb2: Manufacturer: Linux 2.6.31.1-xenomai ehci_hcd
[ 3.765658] usb usb2: SerialNumber: 0000:00:1d.7
[ 3.766776] usb usb2: uevent
[ 3.766838] usb usb2: usb_probe_device
[ 3.766840] usb usb2: configuration #1 chosen from 1 choice
[ 3.767930] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 3.767944] usb 2-0:1.0: uevent
[ 3.768007] hub 2-0:1.0: usb_probe_interface
[ 3.768008] hub 2-0:1.0: usb_probe_interface - got id
[ 3.768010] hub 2-0:1.0: USB hub found
[ 3.769091] hub 2-0:1.0: 6 ports detected
[ 3.770178] hub 2-0:1.0: standalone hub
[ 3.770179] hub 2-0:1.0: no power switching (usb 1.0)
[ 3.770181] hub 2-0:1.0: individual port over-current protection
[ 3.770182] hub 2-0:1.0: power on to power good time: 20ms
[ 3.770186] hub 2-0:1.0: local power source is good
[ 3.770187] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 3.770212] drivers/usb/core/inode.c: creating file '001'
[ 3.770286] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.771371] ohci_hcd: block sizes: ed 80 td 96
[ 3.771434] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.772610] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.773703] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.773705] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.774793] drivers/usb/core/inode.c: creating file '003'
[ 3.774867] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 3.775960] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 3.777067] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 3.777068] uhci_hcd 0000:00:1a.0: Performing full reset
[ 3.777080] uhci_hcd 0000:00:1a.0: supports USB remote wakeup
[ 3.777090] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
[ 3.778234] usb usb3: default language 0x0409
[ 3.778240] usb usb3: udev 1, busnum 3, minor = 256
[ 3.778241] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.779365] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.780518] usb usb3: Product: UHCI Host Controller
[ 3.781655] usb usb3: Manufacturer: Linux 2.6.31.1-xenomai uhci_hcd
[ 3.782800] usb usb3: SerialNumber: 0000:00:1a.0
[ 3.783976] usb usb3: uevent
[ 3.784032] usb usb3: usb_probe_device
[ 3.784034] usb usb3: configuration #1 chosen from 1 choice
[ 3.785202] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 3.785213] usb 3-0:1.0: uevent
[ 3.785267] hub 3-0:1.0: usb_probe_interface
[ 3.785269] hub 3-0:1.0: usb_probe_interface - got id
[ 3.785270] hub 3-0:1.0: USB hub found
[ 3.786439] hub 3-0:1.0: 2 ports detected
[ 3.787580] hub 3-0:1.0: standalone hub
[ 3.787581] hub 3-0:1.0: no power switching (usb 1.0)
[ 3.787583] hub 3-0:1.0: individual port over-current protection
[ 3.787584] hub 3-0:1.0: power on to power good time: 2ms
[ 3.787588] hub 3-0:1.0: local power source is good
[ 3.787589] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 3.787600] drivers/usb/core/inode.c: creating file '001'
[ 3.787624] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.788791] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 3.788794] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.789965] drivers/usb/core/inode.c: creating file '004'
[ 3.790042] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 3.791192] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 3.792340] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 3.792341] uhci_hcd 0000:00:1a.1: Performing full reset
[ 3.792353] uhci_hcd 0000:00:1a.1: supports USB remote wakeup
[ 3.792363] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00
[ 3.793547] usb usb4: default language 0x0409
[ 3.793552] usb usb4: udev 1, busnum 4, minor = 384
[ 3.793554] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.794691] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.795821] usb usb4: Product: UHCI Host Controller
[ 3.796963] usb usb4: Manufacturer: Linux 2.6.31.1-xenomai uhci_hcd
[ 3.798110] usb usb4: SerialNumber: 0000:00:1a.1
[ 3.799262] usb usb4: uevent
[ 3.799322] usb usb4: usb_probe_device
[ 3.799324] usb usb4: configuration #1 chosen from 1 choice
[ 3.800457] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 3.800469] usb 4-0:1.0: uevent
[ 3.800527] hub 4-0:1.0: usb_probe_interface
[ 3.800529] hub 4-0:1.0: usb_probe_interface - got id
[ 3.800530] hub 4-0:1.0: USB hub found
[ 3.801660] hub 4-0:1.0: 2 ports detected
[ 3.802781] hub 4-0:1.0: standalone hub
[ 3.802782] hub 4-0:1.0: no power switching (usb 1.0)
[ 3.802783] hub 4-0:1.0: individual port over-current protection
[ 3.802785] hub 4-0:1.0: power on to power good time: 2ms
[ 3.802788] hub 4-0:1.0: local power source is good
[ 3.802790] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 3.802801] drivers/usb/core/inode.c: creating file '001'
[ 3.802822] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 3.803945] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 3.803947] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 3.805059] drivers/usb/core/inode.c: creating file '005'
[ 3.805128] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 3.806230] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 3.807312] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 3.807314] uhci_hcd 0000:00:1a.2: Performing full reset
[ 3.807326] uhci_hcd 0000:00:1a.2: supports USB remote wakeup
[ 3.807330] uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000fc00
[ 3.808438] usb usb5: default language 0x0409
[ 3.808443] usb usb5: udev 1, busnum 5, minor = 512
[ 3.808445] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.809534] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.810610] usb usb5: Product: UHCI Host Controller
[ 3.811701] usb usb5: Manufacturer: Linux 2.6.31.1-xenomai uhci_hcd
[ 3.812795] usb usb5: SerialNumber: 0000:00:1a.2
[ 3.813908] usb usb5: uevent
[ 3.813965] usb usb5: usb_probe_device
[ 3.813967] usb usb5: configuration #1 chosen from 1 choice
[ 3.815053] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 3.815065] usb 5-0:1.0: uevent
[ 3.815122] hub 5-0:1.0: usb_probe_interface
[ 3.815124] hub 5-0:1.0: usb_probe_interface - got id
[ 3.815125] hub 5-0:1.0: USB hub found
[ 3.816212] hub 5-0:1.0: 2 ports detected
[ 3.817276] hub 5-0:1.0: standalone hub
[ 3.817278] hub 5-0:1.0: no power switching (usb 1.0)
[ 3.817279] hub 5-0:1.0: individual port over-current protection
[ 3.817281] hub 5-0:1.0: power on to power good time: 2ms
[ 3.817284] hub 5-0:1.0: local power source is good
[ 3.817286] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 3.817297] drivers/usb/core/inode.c: creating file '001'
[ 3.817318] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.818414] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.818417] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.819494] drivers/usb/core/inode.c: creating file '006'
[ 3.819570] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 3.820663] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 3.821754] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 3.821755] uhci_hcd 0000:00:1d.0: Performing full reset
[ 3.821767] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
[ 3.821771] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80
[ 3.822865] usb usb6: default language 0x0409
[ 3.822870] usb usb6: udev 1, busnum 6, minor = 640
[ 3.822872] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.823978] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.825076] usb usb6: Product: UHCI Host Controller
[ 3.826166] usb usb6: Manufacturer: Linux 2.6.31.1-xenomai uhci_hcd
[ 3.827248] usb usb6: SerialNumber: 0000:00:1d.0
[ 3.828366] usb usb6: uevent
[ 3.828422] usb usb6: usb_probe_device
[ 3.828424] usb usb6: configuration #1 chosen from 1 choice
[ 3.829513] usb usb6: adding 6-0:1.0 (config #1, interface 0)
[ 3.829524] usb 6-0:1.0: uevent
[ 3.829575] hub 6-0:1.0: usb_probe_interface
[ 3.829577] hub 6-0:1.0: usb_probe_interface - got id
[ 3.829578] hub 6-0:1.0: USB hub found
[ 3.830667] hub 6-0:1.0: 2 ports detected
[ 3.831736] hub 6-0:1.0: standalone hub
[ 3.831737] hub 6-0:1.0: no power switching (usb 1.0)
[ 3.831738] hub 6-0:1.0: individual port over-current protection
[ 3.831740] hub 6-0:1.0: power on to power good time: 2ms
[ 3.831743] hub 6-0:1.0: local power source is good
[ 3.831745] hub 6-0:1.0: trying to enable port power on non-switchable hub
[ 3.831758] drivers/usb/core/inode.c: creating file '001'
[ 3.831779] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.832884] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.832886] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.833978] drivers/usb/core/inode.c: creating file '007'
[ 3.834023] ehci_hcd 0000:00:1a.7: GetStatus port 5 status 001803 POWER sig=j CSC CONNECT
[ 3.834025] hub 1-0:1.0: port 5: status 0501 change 0001
[ 3.834032] ehci_hcd 0000:00:1a.7: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT
[ 3.834035] hub 1-0:1.0: port 6: status 0501 change 0001
[ 3.834043] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 3.835134] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 3.836225] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 3.836227] uhci_hcd 0000:00:1d.1: Performing full reset
[ 3.836239] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
[ 3.836243] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
[ 3.837365] usb usb7: default language 0x0409
[ 3.837371] usb usb7: udev 1, busnum 7, minor = 768
[ 3.837372] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.838466] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.839562] usb usb7: Product: UHCI Host Controller
[ 3.840666] usb usb7: Manufacturer: Linux 2.6.31.1-xenomai uhci_hcd
[ 3.841769] usb usb7: SerialNumber: 0000:00:1d.1
[ 3.842881] usb usb7: uevent
[ 3.842941] usb usb7: usb_probe_device
[ 3.842943] usb usb7: configuration #1 chosen from 1 choice
[ 3.844036] usb usb7: adding 7-0:1.0 (config #1, interface 0)
[ 3.844047] usb 7-0:1.0: uevent
[ 3.844104] hub 7-0:1.0: usb_probe_interface
[ 3.844105] hub 7-0:1.0: usb_probe_interface - got id
[ 3.844107] hub 7-0:1.0: USB hub found
[ 3.845192] hub 7-0:1.0: 2 ports detected
[ 3.846274] hub 7-0:1.0: standalone hub
[ 3.846275] hub 7-0:1.0: no power switching (usb 1.0)
[ 3.846276] hub 7-0:1.0: individual port over-current protection
[ 3.846278] hub 7-0:1.0: power on to power good time: 2ms
[ 3.846281] hub 7-0:1.0: local power source is good
[ 3.846283] hub 7-0:1.0: trying to enable port power on non-switchable hub
[ 3.846294] drivers/usb/core/inode.c: creating file '001'
[ 3.846317] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.847416] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.847419] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.848522] drivers/usb/core/inode.c: creating file '008'
[ 3.848590] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 3.849696] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 3.850780] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 3.850782] uhci_hcd 0000:00:1d.2: Performing full reset
[ 3.850793] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
[ 3.850803] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[ 3.851932] usb usb8: default language 0x0409
[ 3.851937] usb usb8: udev 1, busnum 8, minor = 896
[ 3.851939] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.853049] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.854167] usb usb8: Product: UHCI Host Controller
[ 3.855257] usb usb8: Manufacturer: Linux 2.6.31.1-xenomai uhci_hcd
[ 3.856367] usb usb8: SerialNumber: 0000:00:1d.2
[ 3.857478] usb usb8: uevent
[ 3.857541] usb usb8: usb_probe_device
[ 3.857543] usb usb8: configuration #1 chosen from 1 choice
[ 3.858632] usb usb8: adding 8-0:1.0 (config #1, interface 0)
[ 3.858646] usb 8-0:1.0: uevent
[ 3.858690] hub 8-0:1.0: usb_probe_interface
[ 3.858692] hub 8-0:1.0: usb_probe_interface - got id
[ 3.858693] hub 8-0:1.0: USB hub found
[ 3.859775] hub 8-0:1.0: 2 ports detected
[ 3.860876] hub 8-0:1.0: standalone hub
[ 3.860877] hub 8-0:1.0: no power switching (usb 1.0)
[ 3.860879] hub 8-0:1.0: individual port over-current protection
[ 3.860880] hub 8-0:1.0: power on to power good time: 2ms
[ 3.860884] hub 8-0:1.0: local power source is good
[ 3.860885] hub 8-0:1.0: trying to enable port power on non-switchable hub
[ 3.860897] drivers/usb/core/inode.c: creating file '001'
[ 3.860978] usbcore: registered new interface driver usblp
[ 3.862073] Initializing USB Mass Storage driver...
[ 3.863232] usbcore: registered new interface driver usb-storage
[ 3.864328] USB Mass Storage support registered.
[ 3.865487] usbcore: registered new interface driver libusual
[ 3.866794] PNP: No PS/2 controller found. Probing ports directly.
[ 3.870483] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.871607] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.872035] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 3.872838] mice: PS/2 mouse device common for all mice
[ 3.874129] rtc_cmos 00:05: RTC can wake from S4
[ 3.875286] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 3.876402] rtc0: alarms up to one day, 242 bytes nvram, hpet irqs
[ 3.877584] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.878810] cpuidle: using governor ladder
[ 3.879910] cpuidle: using governor menu
[ 3.882575] usbcore: registered new interface driver hiddev
[ 3.883723] usbcore: registered new interface driver usbhid
[ 3.884825] usbhid: v2.6:USB HID core driver
[ 3.885941] Netfilter messages via NETLINK v0.30.
[ 3.887023] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 3.888031] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 3.888314] ctnetlink v0.93: registering with nfnetlink.
[ 3.889481] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.890584] TCP cubic registered
[ 3.891658] Initializing XFRM netlink socket
[ 3.893030] NET: Registered protocol family 10
[ 3.894263] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 3.895349] IPv6 over IPv4 tunneling driver
[ 3.896596] NET: Registered protocol family 17
[ 3.897939] RPC: Registered udp transport module.
[ 3.899006] RPC: Registered tcp transport module.
[ 3.904021] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 3.913519] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.914633] ata4: SATA link down (SStatus 4 SControl 300)
[ 3.915286] ata2.00: ATAPI: PLDS DVD+/-RW DH-16AAS, JD12, max UDMA/100, ATAPI AN
[ 3.916015] uhci_hcd 0000:00:1a.2: port 1 portsc 008a,00
[ 3.916025] uhci_hcd 0000:00:1a.2: port 2 portsc 008a,00
[ 3.916813] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.917925] ata2.00: configured for UDMA/100
[ 3.917927] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.917939] ata3: SATA link down (SStatus 4 SControl 300)
[ 3.932019] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 3.936018] hub 1-0:1.0: state 7 ports 6 chg 0060 evt 0000
[ 3.936027] hub 1-0:1.0: port 5, status 0501, change 0000, 480 Mb/s
[ 3.944779] ata1.00: ATA-8: ST3500418AS, CC44, max UDMA/133
[ 3.945917] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 3.986320] ata1.00: configured for UDMA/133
[ 3.987431] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xf t4
[ 3.988239] ehci_hcd 0000:00:1a.7: port 5 full speed --> companion
[ 3.988242] ehci_hcd 0000:00:1a.7: GetStatus port 5 status 003801 POWER OWNER sig=j CONNECT
[ 3.988245] hub 1-0:1.0: port 5 not reset yet, waiting 50ms
[ 3.988524] ata1: irq_stat 0x00400040, connection status changed
[ 3.989609] ata1: hard resetting link
[ 4.044013] ehci_hcd 0000:00:1a.7: GetStatus port 5 status 003002 POWER OWNER sig=se0 CSC
[ 4.044031] hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s
[ 4.044036] ehci_hcd 0000:00:1a.7: port 6 low speed --> companion
[ 4.100013] ehci_hcd 0000:00:1a.7: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC
[ 4.100027] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 4.100032] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 4.100035] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 4.100041] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002
[ 4.100048] uhci_hcd 0000:00:1a.2: port 1 portsc 0093,00
[ 4.100054] hub 5-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
[ 4.228015] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
[ 4.340011] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 4.476014] usb 5-1: ep0 maxpacket = 8
[ 4.513332] usb 5-1: skipped 1 descriptor after interface
[ 4.513335] usb 5-1: skipped 1 descriptor after interface
[ 4.518326] usb 5-1: default language 0x0409
[ 4.537321] usb 5-1: udev 2, busnum 5, minor = 513
[ 4.537323] usb 5-1: New USB device found, idVendor=413c, idProduct=2101
[ 4.538462] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.539575] usb 5-1: Product: Dell Smart Card Reader Keyboard
[ 4.540689] usb 5-1: Manufacturer: Dell
[ 4.541808] usb 5-1: uevent
[ 4.541872] usb 5-1: usb_probe_device
[ 4.541874] usb 5-1: configuration #1 chosen from 1 choice
[ 4.545323] usb 5-1: adding 5-1:1.0 (config #1, interface 0)
[ 4.545339] usb 5-1:1.0: uevent
[ 4.545389] usbhid 5-1:1.0: usb_probe_interface
[ 4.545392] usbhid 5-1:1.0: usb_probe_interface - got id
[ 4.550599] input: Dell Dell Smart Card Reader Keyboard as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input0
[ 4.551725] uhci_hcd 0000:00:1a.2: reserve dev 2 ep81-INT, period 16, phase 8, 17 us
[ 4.551852] generic-usb 0003:413C:2101.0001: input,hidraw0: USB HID v1.11 Keyboard [Dell Dell Smart Card Reader Keyboard] on usb-0000:00:1a.2-1/input0
[ 4.553049] usb 5-1: adding 5-1:1.1 (config #1, interface 1)
[ 4.553060] usb 5-1:1.1: uevent
[ 4.553144] drivers/usb/core/inode.c: creating file '002'
[ 4.553159] uhci_hcd 0000:00:1a.2: port 2 portsc 01a3,00
[ 4.553165] hub 5-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s
[ 4.680016] hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301
[ 4.712018] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.779485] ata1.00: configured for UDMA/133
[ 4.780693] ata1: EH complete
[ 4.781927] scsi 0:0:0:0: Direct-Access ATA ST3500418AS CC44 PQ: 0 ANSI: 5
[ 4.783470] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 4.784689] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.785930] sd 0:0:0:0: [sda] Write Protect is off
[ 4.787099] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.787146] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.788003] scsi 1:0:0:0: CD-ROM PLDS DVD+-RW DH-16AAS JD12 PQ: 0 ANSI: 5
[ 4.789699] sda:sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.796096] Uniform CD-ROM driver Revision: 3.20
[ 4.797336] usb 5-2: new low speed USB device using uhci_hcd and address 3
[ 4.798663] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.798788] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.801937] sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 4.848391] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.868010] usb usb3: suspend_rh (auto-stop)
[ 4.868028] usb usb4: suspend_rh (auto-stop)
[ 4.868046] usb usb6: suspend_rh (auto-stop)
[ 4.868063] usb usb7: suspend_rh (auto-stop)
[ 4.868081] usb usb8: suspend_rh (auto-stop)
[ 4.902432] kjournald starting. Commit interval 5 seconds
[ 4.902449] EXT3-fs: mounted filesystem with writeback data mode.
[ 4.902458] VFS: Mounted root (ext3 filesystem) readonly on device 8:3.
[ 4.906150] Freeing unused kernel memory: 432k freed
[ 4.954254] usb 5-2: skipped 1 descriptor after interface
[ 4.959249] usb 5-2: default language 0x0409
[ 4.968246] usb 5-2: udev 3, busnum 5, minor = 514
[ 4.968249] usb 5-2: New USB device found, idVendor=0461, idProduct=4d51
[ 4.969542] usb 5-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 4.970795] usb 5-2: Product: DELL Laser Mouse
[ 4.972071] usb 5-2: uevent
[ 4.972146] usb 5-2: usb_probe_device
[ 4.972148] usb 5-2: configuration #1 chosen from 1 choice
[ 4.976249] usb 5-2: adding 5-2:1.0 (config #1, interface 0)
[ 4.976269] usb 5-2:1.0: uevent
[ 4.976315] usbhid 5-2:1.0: usb_probe_interface
[ 4.976318] usbhid 5-2:1.0: usb_probe_interface - got id
[ 4.990470] input: DELL Laser Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input/input1
[ 4.991833] generic-usb 0003:0461:4D51.0002: input,hidraw1: USB HID v1.11 Mouse [DELL Laser Mouse] on usb-0000:00:1a.2-2/input0
[ 4.993157] drivers/usb/core/inode.c: creating file '003'
[ 4.993175] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002
[ 6.762239] udev: starting version 141
[ 6.775027] usb usb3: uevent
[ 6.775042] usb 3-0:1.0: uevent
[ 6.775076] usb usb4: uevent
[ 6.775088] usb 4-0:1.0: uevent
[ 6.775123] usb usb5: uevent
[ 6.775136] usb 5-0:1.0: uevent
[ 6.775151] usb 5-1: uevent
[ 6.775164] usb 5-1:1.0: uevent
[ 6.775238] usb 5-1:1.1: uevent
[ 6.775252] usb 5-2: uevent
[ 6.775264] usb 5-2:1.0: uevent
[ 6.775363] usb usb1: uevent
[ 6.775377] usb 1-0:1.0: uevent
[ 6.775496] usb usb6: uevent
[ 6.775508] usb 6-0:1.0: uevent
[ 6.775544] usb usb7: uevent
[ 6.775556] usb 7-0:1.0: uevent
[ 6.775591] usb usb8: uevent
[ 6.775603] usb 8-0:1.0: uevent
[ 6.775637] usb usb2: uevent
[ 6.775649] usb 2-0:1.0: uevent
[ 6.781524] hub 2-0:1.0: hub_suspend
[ 6.781531] usb usb2: bus auto-suspend
[ 6.781533] ehci_hcd 0000:00:1d.7: suspend root hub
[ 6.781552] hub 3-0:1.0: hub_suspend
[ 6.781555] usb usb3: bus auto-suspend
[ 6.781557] usb usb3: suspend_rh
[ 6.781571] hub 4-0:1.0: hub_suspend
[ 6.781574] usb usb4: bus auto-suspend
[ 6.781575] usb usb4: suspend_rh
[ 6.781588] hub 6-0:1.0: hub_suspend
[ 6.781591] usb usb6: bus auto-suspend
[ 6.781592] usb usb6: suspend_rh
[ 6.781605] hub 7-0:1.0: hub_suspend
[ 6.781608] usb usb7: bus auto-suspend
[ 6.781609] usb usb7: suspend_rh
[ 6.781621] hub 8-0:1.0: hub_suspend
[ 6.781624] usb usb8: bus auto-suspend
[ 6.781625] usb usb8: suspend_rh
[ 6.781638] hub 1-0:1.0: hub_suspend
[ 6.781640] usb usb1: bus auto-suspend
[ 6.781642] ehci_hcd 0000:00:1a.7: suspend root hub
[ 6.881755] usb 5-1:1.0: uevent
[ 6.881845] usb 5-1: uevent
[ 6.884484] usb 5-2:1.0: uevent
[ 6.884563] usb 5-2: uevent
[ 6.886904] usb 5-2:1.0: uevent
[ 6.886968] usb 5-2: uevent
[ 7.008859] 8139too Fast Ethernet driver 0.9.28
[ 7.008894] 8139too 0000:03:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 7.009469] eth1: RealTek RTL8139 at 0xdc00, 00:1f:1f:14:69:6c, IRQ 18
[ 8.009624] EXT3 FS on sda3, internal journal
[ 8.644175] kjournald starting. Commit interval 5 seconds
[ 8.644390] EXT3 FS on sda5, internal journal
[ 8.644395] EXT3-fs: mounted filesystem with writeback data mode.
[ 8.750226] Unable to find swap-space signature
[ 13.452686] e1000e 0000:00:19.0: irq 32 for MSI/MSI-X
[ 13.504041] e1000e 0000:00:19.0: irq 32 for MSI/MSI-X
[ 13.504614] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.084755] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 15.084758] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 15.085272] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 17.720647] eth1: link down
[ 17.721166] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 24.162231] usb usb3: uevent
[ 24.162271] usb 3-0:1.0: uevent
[ 24.162363] usb usb4: uevent
[ 24.162400] usb 4-0:1.0: uevent
[ 24.162503] usb usb5: uevent
[ 24.162541] usb 5-0:1.0: uevent
[ 24.162575] usb 5-1: uevent
[ 24.162613] usb 5-1:1.0: uevent
[ 24.162817] usb 5-1:1.1: uevent
[ 24.162851] usb 5-2: uevent
[ 24.162912] usb 5-2:1.0: uevent
[ 24.163219] usb usb1: uevent
[ 24.163269] usb 1-0:1.0: uevent
[ 24.163551] usb usb6: uevent
[ 24.163589] usb 6-0:1.0: uevent
[ 24.163680] usb usb7: uevent
[ 24.163728] usb 7-0:1.0: uevent
[ 24.163819] usb usb8: uevent
[ 24.163856] usb 8-0:1.0: uevent
[ 24.163946] usb usb2: uevent
[ 24.163983] usb 2-0:1.0: uevent
[ 25.908006] eth0: no IPv6 routers present
[ 27.238160] svc: failed to register lockdv1 RPC service (errno 97).
[ 27.238892] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 27.244367] NFSD: starting 90-second grace period
[ 30.565033] uhci_hcd 0000:00:1a.2: reserve dev 3 ep81-INT, period 8, phase 4, 99 us
[ 31.541577] uhci_hcd 0000:00:1a.2: release dev 3 ep81-INT, period 8, phase 4, 99 us
next prev parent reply other threads:[~2009-10-02 13:22 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-02 11:48 [Xenomai-help] Freeze on SMP x86-64 Roman Pisl
2009-10-02 12:39 ` Gilles Chanteperdrix
2009-10-02 13:22 ` Roman Pisl [this message]
2009-10-02 13:25 ` Gilles Chanteperdrix
2009-10-02 13:34 ` Philippe Gerum
2009-10-02 13:36 ` Philippe Gerum
2009-10-03 16:01 ` Jan Kiszka
[not found] ` <4AC9E655.5090006@domain.hid>
[not found] ` <4AC9ED6B.4050004@domain.hid>
[not found] ` <4AC9F4FA.5070409@domain.hid>
[not found] ` <4ACA013F.8040602@domain.hid>
2009-10-06 13:18 ` Roman Pisl
2009-10-06 13:56 ` Jan Kiszka
2009-10-06 14:50 ` Roman Pisl
2009-10-06 15:33 ` Roman Pisl
2009-10-06 15:45 ` Roman Pisl
2009-10-06 15:59 ` Jan Kiszka
2009-10-02 12:45 ` Peter Soetens
2009-10-02 12:58 ` Roman Pisl
2009-10-02 13:40 ` Philippe Gerum
2009-10-02 14:14 ` Roman Pisl
2009-10-02 16:40 ` Gilles Chanteperdrix
2009-10-02 14:21 ` Jan Kiszka
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4AC5FEAD.7000608@domain.hid \
--to=rpisl@domain.hid \
--cc=gilles.chanteperdrix@xenomai.org \
--cc=xenomai@xenomai.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.