From: "Richard Röjfors" <richard.rojfors@mocean-labs.com>
To: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Cc: david-b@pacbell.net, Andrew Morton <akpm@linux-foundation.org>
Subject: [PATCH] gpio: Added timbgpio
Date: Tue, 06 Oct 2009 16:16:46 +0200 [thread overview]
Message-ID: <4ACB514E.9050102@mocean-labs.com> (raw)
Supplied is a GPIO driver for the Timberdale FPGA found on the
Intel Atom board Russellville.
The GPIO driver also have a IRQ-chip to support interrupts
on the pins.
Signed-off-by: Richard Röjfors <richard.rojfors@mocean-labs.com>
---
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 2ad0128..743ede6 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -196,6 +196,12 @@ config GPIO_LANGWELL
help
Say Y here to support Intel Moorestown platform GPIO.
+config GPIO_TIMBERDALE
+ bool "Support for timberdale GPIO IP"
+ depends on MFD_TIMBERDALE && GPIOLIB && HAS_IOMEM
+ ---help---
+ Add support for the GPIO IP in the timberdale FPGA.
+
comment "SPI GPIO expanders:"
config GPIO_MAX7301
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 00a532c..2ff686b 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_GPIO_MCP23S08) += mcp23s08.o
obj-$(CONFIG_GPIO_PCA953X) += pca953x.o
obj-$(CONFIG_GPIO_PCF857X) += pcf857x.o
obj-$(CONFIG_GPIO_PL061) += pl061.o
+obj-$(CONFIG_GPIO_TIMBERDALE) += timbgpio.o
obj-$(CONFIG_GPIO_TWL4030) += twl4030-gpio.o
obj-$(CONFIG_GPIO_UCB1400) += ucb1400_gpio.o
obj-$(CONFIG_GPIO_XILINX) += xilinx_gpio.o
diff --git a/drivers/gpio/timbgpio.c b/drivers/gpio/timbgpio.c
new file mode 100644
index 0000000..a4d344b
--- /dev/null
+++ b/drivers/gpio/timbgpio.c
@@ -0,0 +1,342 @@
+/*
+ * timbgpio.c timberdale FPGA GPIO driver
+ * Copyright (c) 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Supports:
+ * Timberdale FPGA GPIO
+ */
+
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/timb_gpio.h>
+#include <linux/interrupt.h>
+
+#define DRIVER_NAME "timb-gpio"
+
+#define TGPIOVAL 0x00
+#define TGPIODIR 0x04
+#define TGPIO_IER 0x08
+#define TGPIO_ISR 0x0c
+#define TGPIO_IPR 0x10
+#define TGPIO_ICR 0x14
+#define TGPIO_FLR 0x18
+#define TGPIO_LVR 0x1c
+
+struct timbgpio {
+ void __iomem *membase;
+ spinlock_t lock; /* mutual exclusion */
+ struct gpio_chip gpio;
+ int irq_base;
+};
+
+static int timbgpio_update_bit(struct gpio_chip *gpio, unsigned index,
+ unsigned offset, bool enabled)
+{
+ struct timbgpio *tgpio = container_of(gpio, struct timbgpio, gpio);
+ u32 reg;
+
+ spin_lock(&tgpio->lock);
+ reg = ioread32(tgpio->membase + offset);
+
+ if (enabled)
+ reg |= (1 << index);
+ else
+ reg &= ~(1 << index);
+
+ iowrite32(reg, tgpio->membase + offset);
+ spin_unlock(&tgpio->lock);
+
+ return 0;
+}
+
+static int timbgpio_gpio_direction_input(struct gpio_chip *gpio, unsigned nr)
+{
+ return timbgpio_update_bit(gpio, nr, TGPIODIR, true);
+}
+
+static int timbgpio_gpio_get(struct gpio_chip *gpio, unsigned nr)
+{
+ struct timbgpio *tgpio = container_of(gpio, struct timbgpio, gpio);
+ u32 value;
+
+ value = ioread32(tgpio->membase + TGPIOVAL);
+ return (value & (1 << nr)) ? 1 : 0;
+}
+
+static int timbgpio_gpio_direction_output(struct gpio_chip *gpio,
+ unsigned nr, int val)
+{
+ return timbgpio_update_bit(gpio, nr, TGPIODIR, false);
+}
+
+static void timbgpio_gpio_set(struct gpio_chip *gpio,
+ unsigned nr, int val)
+{
+ timbgpio_update_bit(gpio, nr, TGPIOVAL, val != 0);
+}
+
+static int timbgpio_to_irq(struct gpio_chip *gpio, unsigned offset)
+{
+ struct timbgpio *tgpio = container_of(gpio, struct timbgpio, gpio);
+
+ if (tgpio->irq_base <= 0)
+ return -EINVAL;
+
+ return tgpio->irq_base + offset;
+}
+
+/*
+ * GPIO IRQ
+ */
+static void timbgpio_irq_disable(unsigned irq)
+{
+ struct timbgpio *tgpio = get_irq_chip_data(irq);
+ int offset = irq - tgpio->irq_base;
+
+ timbgpio_update_bit(&tgpio->gpio, offset, TGPIO_IER, 0);
+}
+
+static void timbgpio_irq_enable(unsigned irq)
+{
+ struct timbgpio *tgpio = get_irq_chip_data(irq);
+ int offset = irq - tgpio->irq_base;
+
+ timbgpio_update_bit(&tgpio->gpio, offset, TGPIO_IER, 1);
+}
+
+static int timbgpio_irq_type(unsigned irq, unsigned trigger)
+{
+ struct timbgpio *tgpio = get_irq_chip_data(irq);
+ int offset = irq - tgpio->irq_base;
+ unsigned long flags;
+ u32 lvr, flr;
+
+ if (offset < 0 || offset > tgpio->gpio.ngpio)
+ return -EINVAL;
+
+ spin_lock_irqsave(&tgpio->lock, flags);
+
+ lvr = ioread32(tgpio->membase + TGPIO_LVR);
+ flr = ioread32(tgpio->membase + TGPIO_FLR);
+
+ if (trigger & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
+ flr &= ~(1 << offset);
+ if (trigger & IRQ_TYPE_LEVEL_HIGH)
+ lvr |= 1 << offset;
+ else
+ lvr &= ~(1 << offset);
+ }
+
+ if ((trigger & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH)
+ return -EINVAL;
+ else {
+ flr |= 1 << offset;
+ /* opposite compared to the datasheet, but it mirrors the
+ * reality
+ */
+ if (trigger & IRQ_TYPE_EDGE_FALLING)
+ lvr |= 1 << offset;
+ else
+ lvr &= ~(1 << offset);
+ }
+
+ iowrite32(lvr, tgpio->membase + TGPIO_LVR);
+ iowrite32(flr, tgpio->membase + TGPIO_FLR);
+ iowrite32(1 << offset, tgpio->membase + TGPIO_ICR);
+ spin_unlock_irqrestore(&tgpio->lock, flags);
+
+ return 0;
+}
+
+static void timbgpio_irq(unsigned int irq, struct irq_desc *desc)
+{
+ struct timbgpio *tgpio = get_irq_data(irq);
+ unsigned long ipr;
+ int offset;
+
+ desc->chip->ack(irq);
+ ipr = ioread32(tgpio->membase + TGPIO_IPR);
+ iowrite32(ipr, tgpio->membase + TGPIO_ICR);
+
+ for_each_bit(offset, &ipr, tgpio->gpio.ngpio)
+ generic_handle_irq(timbgpio_to_irq(&tgpio->gpio, offset));
+}
+
+static struct irq_chip timbgpio_irqchip = {
+ .name = "GPIO",
+ .enable = timbgpio_irq_enable,
+ .disable = timbgpio_irq_disable,
+ .set_type = timbgpio_irq_type,
+};
+
+static int __devinit timbgpio_probe(struct platform_device *pdev)
+{
+ int err, i;
+ struct gpio_chip *gc;
+ struct timbgpio *tgpio;
+ struct resource *iomem;
+ struct timbgpio_platform_data *pdata = pdev->dev.platform_data;
+ int irq = platform_get_irq(pdev, 0);
+
+ if (!pdata || pdata->nr_pins > 32) {
+ err = -EINVAL;
+ goto err_mem;
+ }
+
+ iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!iomem) {
+ err = -EINVAL;
+ goto err_mem;
+ }
+
+ tgpio = kzalloc(sizeof(*tgpio), GFP_KERNEL);
+ if (!tgpio) {
+ err = -EINVAL;
+ goto err_mem;
+ }
+ tgpio->irq_base = pdata->irq_base;
+
+ spin_lock_init(&tgpio->lock);
+
+ if (!request_mem_region(iomem->start, resource_size(iomem),
+ DRIVER_NAME)) {
+ err = -EBUSY;
+ goto err_request;
+ }
+
+ tgpio->membase = ioremap(iomem->start, resource_size(iomem));
+ if (!tgpio->membase) {
+ err = -ENOMEM;
+ goto err_ioremap;
+ }
+
+ gc = &tgpio->gpio;
+
+ gc->label = dev_name(&pdev->dev);
+ gc->owner = THIS_MODULE;
+ gc->dev = &pdev->dev;
+ gc->direction_input = timbgpio_gpio_direction_input;
+ gc->get = timbgpio_gpio_get;
+ gc->direction_output = timbgpio_gpio_direction_output;
+ gc->set = timbgpio_gpio_set;
+ gc->to_irq = (irq >= 0 && tgpio->irq_base > 0) ? timbgpio_to_irq : NULL;
+ gc->dbg_show = NULL;
+ gc->base = pdata->gpio_base;
+ gc->ngpio = pdata->nr_pins;
+ gc->can_sleep = 0;
+
+ err = gpiochip_add(gc);
+ if (err)
+ goto err_chipadd;
+
+ platform_set_drvdata(pdev, tgpio);
+
+ /* make sure to disable interrupts */
+ iowrite32(0x0, tgpio->membase + TGPIO_IER);
+
+ if (irq < 0 || tgpio->irq_base <= 0)
+ return 0;
+
+ for (i = 0; i < pdata->nr_pins; i++) {
+ set_irq_chip_and_handler_name(tgpio->irq_base + i,
+ &timbgpio_irqchip, handle_simple_irq, "mux");
+ set_irq_chip_data(tgpio->irq_base + i, tgpio);
+#ifdef CONFIG_ARM
+ set_irq_flags(tgpio->irq_base + i, IRQF_VALID | IRQF_PROBE);
+#endif
+ }
+
+ set_irq_data(irq, tgpio);
+ set_irq_chained_handler(irq, timbgpio_irq);
+
+ return 0;
+
+err_chipadd:
+ iounmap(tgpio->membase);
+err_ioremap:
+ release_mem_region(iomem->start, resource_size(iomem));
+err_request:
+ kfree(tgpio);
+err_mem:
+ printk(KERN_ERR DRIVER_NAME": Failed to register GPIOs: %d\n", err);
+
+ return err;
+}
+
+static int __devexit timbgpio_remove(struct platform_device *pdev)
+{
+ int err;
+ struct timbgpio_platform_data *pdata = pdev->dev.platform_data;
+ struct timbgpio *tgpio = platform_get_drvdata(pdev);
+ struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ int irq = platform_get_irq(pdev, 0);
+
+ if (irq >= 0 && tgpio->irq_base > 0) {
+ int i;
+ for (i = 0; i < pdata->nr_pins; i++) {
+ set_irq_chip(tgpio->irq_base + i, NULL);
+ set_irq_chip_data(tgpio->irq_base + i, NULL);
+ }
+
+ set_irq_handler(irq, NULL);
+ set_irq_data(irq, NULL);
+ }
+
+ err = gpiochip_remove(&tgpio->gpio);
+ if (err)
+ printk(KERN_ERR DRIVER_NAME": failed to remove gpio_chip\n");
+
+ iounmap(tgpio->membase);
+ release_mem_region(iomem->start, resource_size(iomem));
+ kfree(tgpio);
+
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver timbgpio_platform_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = timbgpio_probe,
+ .remove = timbgpio_remove,
+};
+
+/*--------------------------------------------------------------------------*/
+
+static int __init timbgpio_init(void)
+{
+ return platform_driver_register(&timbgpio_platform_driver);
+}
+
+static void __exit timbgpio_exit(void)
+{
+ platform_driver_unregister(&timbgpio_platform_driver);
+}
+
+module_init(timbgpio_init);
+module_exit(timbgpio_exit);
+
+MODULE_DESCRIPTION("Timberdale GPIO driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Mocean Laboratories");
+MODULE_ALIAS("platform:"DRIVER_NAME);
+
diff --git a/include/linux/timb_gpio.h b/include/linux/timb_gpio.h
new file mode 100644
index 0000000..ce456ea
--- /dev/null
+++ b/include/linux/timb_gpio.h
@@ -0,0 +1,37 @@
+/*
+ * timb_gpio.h timberdale FPGA GPIO driver, platform data definition
+ * Copyright (c) 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _LINUX_TIMB_GPIO_H
+#define _LINUX_TIMB_GPIO_H
+
+/**
+ * struct timbgpio_platform_data - Platform data of the Timberdale GPIO driver
+ * @gpio_base The number of the first GPIO pin, set to -1 for
+ * dynamic number allocation.
+ * @nr_pins Number of pins that is supported by the hardware (1-32)
+ * @irq_base If IRQ is supported by the hardware, this is the base
+ * number of IRQ:s. One IRQ per pin will be used. Set to
+ * -1 if IRQ:s is not supported.
+ */
+struct timbgpio_platform_data {
+ int gpio_base;
+ int nr_pins;
+ int irq_base;
+};
+
+#endif
next reply other threads:[~2009-10-06 14:47 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-06 14:16 Richard Röjfors [this message]
-- strict thread matches above, loose matches on Subject: below --
2009-06-03 8:07 [PATCH] gpio: Added timbgpio Richard Röjfors
2009-06-04 7:51 ` Andrew Morton
2009-06-04 12:53 ` Richard Röjfors
2009-06-04 18:53 ` Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4ACB514E.9050102@mocean-labs.com \
--to=richard.rojfors@mocean-labs.com \
--cc=akpm@linux-foundation.org \
--cc=david-b@pacbell.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.