From: Greg Wilson-Lindberg <gregw@spacex.net>
To: Rick Jones <rick.jones2@hp.com>
Cc: Greg Wilson-Lindberg <Greg.Wilson-Lindberg@spacex.com>,
"netfilter@vger.kernel.org" <netfilter@vger.kernel.org>
Subject: Re: Multiple interfaces with the same IP address
Date: Wed, 7 Oct 2009 13:52:31 -0700 [thread overview]
Message-ID: <4ACCFF8F.1010000@spacex.net> (raw)
In-Reply-To: <4ACCF3F0.5040703@hp.com>
Rick Jones wrote:
...
>
> Is there a specific reason you cannot further subnet the 10.0.0.0/8 network for
> your HDLC channels and eschew the NAT? Then at least ignoring the issue of
> "routing" broadcast datagrams (these are IP broadcasts and not simply ethernet
> broadcasts right?) reaching-out and touching the HDLC devices from the WAN would
> seem to be more straightforward.
>
> rick jones
> visions of many static routing table entries floating through his head
The 10.0.0.0/8 network is an existing network that has 100's of computers on it. We are planning on
using some 10.x.0.0/16 addresses to NETMAP to the 172.16.0.0/16 addresses in some limited
situations, but this doesn't solve the problem of routing to the correct HDLC channel to get to the
final destination.
Greg
next prev parent reply other threads:[~2009-10-07 20:52 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-07 19:36 Multiple interfaces with the same IP address Greg Wilson-Lindberg
2009-10-07 20:02 ` Rick Jones
2009-10-07 20:52 ` Greg Wilson-Lindberg [this message]
2009-10-07 21:15 ` Rick Jones
2009-10-07 21:21 ` Oskar Berggren
2009-10-07 21:57 ` Greg Wilson-Lindberg
2009-10-07 22:42 ` Rick Jones
2009-10-07 23:00 ` Greg Wilson-Lindberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4ACCFF8F.1010000@spacex.net \
--to=gregw@spacex.net \
--cc=Greg.Wilson-Lindberg@spacex.com \
--cc=netfilter@vger.kernel.org \
--cc=rick.jones2@hp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.