[Buildroot] Buliding toolchain

[Dan Pattison <dan.pattison@ethertek.ca>]

Hello,

There has been much discussion that BR2_ARM_OABI=y should not be used, 
instead use EABI.

Best Regards,
Dan Pattison



hariprasaddaruru wrote:
> uable to build tool chain for Arm Atmel AT91RM9200(Kwikbyte kb9202c) , Plz
> help
>
> here's my config file dump:
>
> #
> # Automatically generated make config: don't edit
> # Fri Oct  9 10:59:04 2009
> #
> BR2_HAVE_DOT_CONFIG=y
> BR2_VERSION="2009.08"
> # BR2_alpha is not set
> BR2_arm=y
> # BR2_armeb is not set
> # BR2_avr32 is not set
> # BR2_cris is not set
> # BR2_ia64 is not set
> # BR2_i386 is not set
> # BR2_m68k is not set
> # BR2_mips is not set
> # BR2_mipsel is not set
> # BR2_nios2 is not set
> # BR2_powerpc is not set
> # BR2_sh is not set
> # BR2_sh64 is not set
> # BR2_sparc is not set
> # BR2_sparc64 is not set
> # BR2_x86_64 is not set
> # BR2_xtensa is not set
> BR2_generic_arm=y
> # BR2_arm7tdmi is not set
> # BR2_arm610 is not set
> # BR2_arm710 is not set
> # BR2_arm720t is not set
> # BR2_arm920t is not set
> # BR2_arm922t is not set
> # BR2_arm926t is not set
> # BR2_arm10t is not set
> # BR2_arm1136jf_s is not set
> # BR2_arm1176jz_s is not set
> # BR2_arm1176jzf_s is not set
> # BR2_sa110 is not set
> # BR2_sa1100 is not set
> # BR2_xscale is not set
> # BR2_iwmmxt is not set
> BR2_ARM_TYPE="GENERIC_ARM"
> BR2_ARM_OABI=y
> # BR2_ARM_EABI is not set
> BR2_ARCH="arm"
> BR2_ENDIAN="LITTLE"
> BR2_GCC_TARGET_ABI="apcs-gnu"
>
> #
> # Target options
> #
>
> #
> # Project Options
> #
> BR2_PROJECT="uclibc"
> BR2_HOSTNAME="uclibc"
> BR2_BANNER="Welcome to Buildroot"
>
> #
> # Preset Devices
> #
> # BR2_TARGET_AMD is not set
> # BR2_TARGET_ARMLTD is not set
> BR2_BOARD_NAME="kb9202"
> BR2_BOARD_PATH="target/device/KwikByte/$(BR2_BOARD_NAME)"
> BR2_TARGET_ATMEL=y
>
> #
> # Atmel AT91 Specific Device Support
> #
> # BR2_TARGET_AT91 is not set
>
> #
> # Secondary locations
> #
> BR2_AT91_LINUXPATCH_SITE="http://maxim.org.za/AT91RM9200/2.6"
> BR2_TARGET_KWIKBYTE=y
>
> #
> # Board Selection
> #
> BR2_TARGET_KB9202=y
> BR2_KERNEL_ARCH_PATCH_DIR="target/device/Atmel/arch-arm/kernel-patches-$(BR2_KERNEL_ARCH_PATCH_VERSION)"
>
> #
> # Generic System Support
> #
> # BR2_TARGET_GENERIC_ACCESS_POINT is not set
> # BR2_TARGET_GENERIC_FIREWALL is not set
>
> #
> # Generic development system requires a toolchain with WCHAR and
> PROGRAM_INVOCATION support
> #
>
> #
> # Build options
> #
> BR2_WGET="wget --passive-ftp -nd"
> BR2_SVN_CO="svn co"
> BR2_SVN_UP="svn up"
> BR2_GIT="git clone"
> BR2_ZCAT="gzip -d -c"
> BR2_BZCAT="bzcat"
> BR2_TAR_OPTIONS=""
> BR2_DL_DIR="$(BASE_DIR)/dl"
> BR2_COPYTO=""
>
> #
> # Mirrors and Download locations
> #
> BR2_PRIMARY_SITE=""
> BR2_BACKUP_SITE="http://buildroot.net/downloads/sources/"
> BR2_SOURCEFORGE_MIRROR="easynews"
> BR2_KERNEL_MIRROR="http://www.kernel.org/pub/"
> BR2_GNU_MIRROR="http://ftp.gnu.org/pub/gnu"
> BR2_DEBIAN_MIRROR="http://ftp.debian.org"
>
> #
> # Atmel Mirrors
> #
> BR2_ATMEL_MIRROR="ftp://www.at91.com/pub/buildroot/"
> BR2_AT91_PATCH_MIRROR="http://maxim.org.za/AT91RM9200/2.6/"
> BR2_STAGING_DIR="$(BUILD_DIR)/staging_dir"
> # BR2_FPU_SUFFIX is not set
> BR2_TOPDIR_PREFIX=""
> BR2_TOPDIR_SUFFIX=""
> BR2_GNU_BUILD_SUFFIX="pc-linux-gnu"
> BR2_GNU_TARGET_SUFFIX="linux-uclibc"
> BR2_JLEVEL=1
> # BR2_PREFER_IMA is not set
> # BR2_DEPRECATED is not set
> BR2_RECENT=y
> # BR2_CONFIG_CACHE is not set
> # BR2_ENABLE_DEBUG is not set
> BR2_STRIP_strip=y
> # BR2_STRIP_sstrip is not set
> # BR2_STRIP_none is not set
> # BR2_OPTIMIZE_0 is not set
> # BR2_OPTIMIZE_1 is not set
> # BR2_OPTIMIZE_2 is not set
> # BR2_OPTIMIZE_3 is not set
> BR2_OPTIMIZE_S=y
> # BR2_PREFER_STATIC_LIB is not set
> # BR2_HAVE_MANPAGES is not set
> # BR2_HAVE_INFOPAGES is not set
> # BR2_HAVE_DOCUMENTATION is not set
> # BR2_HAVE_DEVFILES is not set
> BR2_UPDATE_CONFIG=y
>
> #
> # Toolchain
> #
> BR2_TOOLCHAIN_BUILDROOT=y
> # BR2_TOOLCHAIN_EXTERNAL is not set
> # BR2_TOOLCHAIN_EXTERNAL_SOURCE is not set
> BR2_TOOLCHAIN_SOURCE=y
> BR2_EXT_GCC_VERSION_4_1_2=y
> BR2_EXT_GCC_VERSION_4_2_1=y
> BR2_EXT_GCC_VERSION_4_2_2=y
> BR2_EXT_GCC_VERSION_4_2_3=y
> BR2_EXT_BINUTILS_VERSION_2_17=y
> BR2_EXT_BINUTILS_VERSION_2_18=y
> BR2_EXT_UCLIBC_VERSION_0_9_28_3=y
> BR2_EXT_UCLIBC_VERSION_0_9_29=y
> BR2_EXT_UCLIBC_VERSION_0_9_30=y
> BR2_EXT_UCLIBC_VERSION_0_9_30_1=y
>
> #
> # Kernel Header Options
> #
> # BR2_KERNEL_HEADERS_2_6_26 is not set
> # BR2_KERNEL_HEADERS_2_6_27 is not set
> # BR2_KERNEL_HEADERS_2_6_28 is not set
> BR2_KERNEL_HEADERS_2_6_29=y
> # BR2_KERNEL_HEADERS_2_6_30 is not set
> # BR2_KERNEL_HEADERS_SNAP is not set
> BR2_DEFAULT_KERNEL_HEADERS="2.6.29.6"
>
> #
> # uClibc Options
> #
> # BR2_UCLIBC_VERSION_0_9_28_3 is not set
> # BR2_UCLIBC_VERSION_0_9_29 is not set
> # BR2_UCLIBC_VERSION_0_9_30 is not set
> BR2_UCLIBC_VERSION_0_9_30_1=y
> # BR2_UCLIBC_VERSION_SNAPSHOT is not set
> BR2_UCLIBC_VERSION_STRING="0.9.30.1"
> BR2_UCLIBC_CONFIG="toolchain/uClibc/uClibc-0.9.30.config"
> # BR2_PTHREAD_DEBUG is not set
> # BR2_UCLIBC_INSTALL_TEST_SUITE is not set
>
> #
> # Binutils Options
> #
> # BR2_BINUTILS_VERSION_2_17 is not set
> # BR2_BINUTILS_VERSION_2_17_50_0_17 is not set
> # BR2_BINUTILS_VERSION_2_18 is not set
> # BR2_BINUTILS_VERSION_2_18_50_0_1 is not set
> # BR2_BINUTILS_VERSION_2_18_50_0_3 is not set
> # BR2_BINUTILS_VERSION_2_18_50_0_6 is not set
> # BR2_BINUTILS_VERSION_2_18_50_0_8 is not set
> # BR2_BINUTILS_VERSION_2_18_50_0_9 is not set
> # BR2_BINUTILS_VERSION_2_19 is not set
> BR2_BINUTILS_VERSION_2_19_1=y
> BR2_BINUTILS_VERSION="2.19.1"
> BR2_EXTRA_BINUTILS_CONFIG_OPTIONS=""
>
> #
> # GCC Options
> #
> # BR2_GCC_VERSION_3_4_6 is not set
> # BR2_GCC_VERSION_4_0_4 is not set
> # BR2_GCC_VERSION_4_1_2 is not set
> # BR2_GCC_VERSION_4_2_1 is not set
> # BR2_GCC_VERSION_4_2_2 is not set
> # BR2_GCC_VERSION_4_2_3 is not set
> # BR2_GCC_VERSION_4_2_4 is not set
> # BR2_GCC_VERSION_4_3_2 is not set
> BR2_GCC_VERSION_4_3_3=y
> # BR2_GCC_VERSION_4_3_4 is not set
> # BR2_GCC_VERSION_4_4_X is not set
> BR2_GCC_SUPPORTS_SYSROOT=y
> BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE=y
> BR2_GCC_VERSION="4.3.3"
> BR2_TOOLCHAIN_SYSROOT=y
> # BR2_GCC_USE_SJLJ_EXCEPTIONS is not set
> BR2_EXTRA_GCC_CONFIG_OPTIONS=""
> # BR2_GCC_CROSS_FORTRAN is not set
> # BR2_INSTALL_OBJC is not set
> # BR2_INSTALL_FORTRAN is not set
> BR2_GCC_SHARED_LIBGCC=y
>
> #
> # Ccache Options
> #
> # BR2_CCACHE is not set
>
> #
> # Gdb Options
> #
> # BR2_PACKAGE_GDB is not set
> # BR2_PACKAGE_GDB_SERVER is not set
> # BR2_PACKAGE_GDB_HOST is not set
>
> #
> # Common Toolchain Options
> #
> # BR2_LARGEFILE is not set
> # BR2_INET_IPV6 is not set
> # BR2_INET_RPC is not set
> # BR2_ENABLE_LOCALE is not set
> # BR2_ENABLE_LOCALE_PURGE is not set
> # BR2_USE_WCHAR is not set
> # BR2_SOFT_FLOAT is not set
> # BR2_USE_SSP is not set
> # BR2_PTHREADS_NONE is not set
> # BR2_PTHREADS is not set
> BR2_PTHREADS_OLD=y
> # BR2_PTHREADS_NATIVE is not set
> # BR2_PROGRAM_INVOCATION is not set
> # BR2_INSTALL_LIBSTDCPP is not set
> BR2_TARGET_OPTIMIZATION="-Os -pipe"
> # BR2_ELF2FLT is not set
> # BR2_MKLIBS is not set
> # BR2_PACKAGE_SSTRIP_TARGET is not set
> # BR2_PACKAGE_SSTRIP_HOST is not set
> # BR2_ENABLE_MULTILIB is not set
> # BR2_VFP_FLOAT is not set
> BR2_CROSS_TOOLCHAIN_TARGET_UTILS=y
>
> #
> # Package Selection for the target
> #
> BR2_PACKAGE_BUSYBOX=y
> # BR2_BUSYBOX_VERSION_1_12_X is not set
> # BR2_BUSYBOX_VERSION_1_13_X is not set
> BR2_BUSYBOX_VERSION_1_14_X=y
> # BR2_PACKAGE_BUSYBOX_SNAPSHOT is not set
> BR2_BUSYBOX_VERSION="1.14.3"
> BR2_PACKAGE_BUSYBOX_FULLINSTALL=y
> BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.13.x.config"
> BR2_PACKAGE_BUSYBOX_HIDE_OTHERS=y
> # BR2_PACKAGE_BUSYBOX_SKELETON is not set
>
> #
> # The minimum needed to build a uClibc development system
> #
> # BR2_PACKAGE_FLEX is not set
> # BR2_PACKAGE_GCC_TARGET is not set
> # BR2_PACKAGE_MAKE is not set
>
> #
> # Other development stuff
> #
> # BR2_PACKAGE_AUTOCONF is not set
> # BR2_PACKAGE_AUTOMAKE is not set
> # BR2_PACKAGE_BISON is not set
> # BR2_PACKAGE_CCACHE_TARGET is not set
> # BR2_PACKAGE_DISTCC is not set
> # BR2_PACKAGE_DMALLOC is not set
> # BR2_PACKAGE_FAKEROOT is not set
> BR2_HOST_FAKEROOT=y
> # BR2_PACKAGE_GETTEXT is not set
> # BR2_PACKAGE_LIBINTL is not set
> # BR2_PACKAGE_LIBGMP is not set
> # BR2_PACKAGE_GPERF is not set
> # BR2_PACKAGE_LIBMPFR is not set
> # BR2_PACKAGE_LIBTOOL is not set
> BR2_PACKAGE_M4=y
>
> #
> # oprofile requires a toolchain with C++ support enabled
> #
> # BR2_PACKAGE_PKG_CONFIG is not set
> # BR2_PACKAGE_READLINE is not set
> # BR2_PACKAGE_PCRE is not set
>
> #
> # Other stuff
> #
> # BR2_PACKAGE_AT is not set
> # BR2_PACKAGE_BEECRYPT is not set
> # BR2_PACKAGE_BERKELEYDB is not set
> # BR2_PACKAGE_BSDIFF is not set
> # BR2_PACKAGE_CUPS is not set
> # BR2_PACKAGE_CUSTOMIZE is not set
> # BR2_PACKAGE_FILE is not set
> # BR2_PACKAGE_GAMIN is not set
>
> #
> # icu requires a toolchain with C++ support and WCHAR enabled
> #
> # BR2_PACKAGE_KEXEC is not set
> # BR2_PACKAGE_LIBCONFIG is not set
> # BR2_PACKAGE_LIBCONFUSE is not set
> # BR2_PACKAGE_LIBDAEMON is not set
> # BR2_PACKAGE_LIBELF is not set
> # BR2_PACKAGE_LIBEVENT is not set
> # BR2_PACKAGE_LIBGCRYPT is not set
> # BR2_PACKAGE_LIBGPG_ERROR is not set
> # BR2_PACKAGE_LIBICONV is not set
> # BR2_PACKAGE_LIBIDN is not set
> # BR2_PACKAGE_LIBLOCKFILE is not set
> # BR2_PACKAGE_LIBOIL is not set
> # BR2_PACKAGE_LIBSYSFS is not set
> # BR2_PACKAGE_LOCKFILE_PROGS is not set
>
> #
> # logrotate     - disabled (requires wchar support)
> #
> # BR2_PACKAGE_LSOF is not set
> # BR2_PACKAGE_LTP-TESTSUITE is not set
> # BR2_PACKAGE_LTRACE is not set
> # BR2_PACKAGE_MEMSTAT is not set
> # BR2_PACKAGE_NG_SPICE_REWORK is not set
> # BR2_PACKAGE_POPT is not set
> # BR2_PACKAGE_SCREEN is not set
> # BR2_PACKAGE_SHARED_MIME_INFO is not set
> # BR2_PACKAGE_STARTUP_NOTIFICATION is not set
> # BR2_PACKAGE_STRACE is not set
> # BR2_PACKAGE_SUDO is not set
>
> #
> # Database
> #
>
> #
> # Mysql client requires a toolchain with C++ support enabled
> #
> # BR2_PACKAGE_SQLITE is not set
>
> #
> # Networking
> #
>
> #
> # Networking applications
> #
> # BR2_PACKAGE_ARGUS is not set
> # BR2_PACKAGE_AVAHI is not set
> # BR2_PACKAGE_AXEL is not set
>
> #
> # bind requires a toolchain with LARGEFILE support
> #
> # BR2_PACKAGE_BMON is not set
> # BR2_PACKAGE_BRIDGE is not set
>
> #
> # ctorrent requires a toolchain with C++ support enabled
> #
> # BR2_PACKAGE_DNSMASQ is not set
> # BR2_PACKAGE_DROPBEAR is not set
> # BR2_PACKAGE_ETHTOOL is not set
> # BR2_PACKAGE_HASERL is not set
> # BR2_PACKAGE_IFPLUGD is not set
>
> #
> # iperf requires a toolchain with C++ support enabled
> #
>
> #
> # iproute2 requires a toolchain with IPv6 support
> #
> # BR2_PACKAGE_IPSEC_TOOLS is not set
>
> #
> # iptables requires a toolchain with LARGEFILE support
> #
> # BR2_PACKAGE_IW is not set
> # BR2_PACKAGE_KISMET is not set
> # BR2_PACKAGE_L2TP is not set
> # BR2_PACKAGE_LIBCGI is not set
>
> #
> # libcgicc requires a toolchain with C++ support enabled
> #
> # BR2_PACKAGE_LIBCURL is not set
> # BR2_PACKAGE_LIBDNET is not set
> # BR2_PACKAGE_LIBEXOSIP2 is not set
> # BR2_PACKAGE_LIBNL is not set
> # BR2_PACKAGE_LIBOSIP2 is not set
> # BR2_PACKAGE_LIBPCAP is not set
> # BR2_PACKAGE_LIBSOUP is not set
> # BR2_PACKAGE_LIBUPNP is not set
> # BR2_PACKAGE_LINKS is not set
> # BR2_PACKAGE_LRZSZ is not set
> # BR2_PACKAGE_MDNSRESPONDER is not set
> # BR2_PACKAGE_MIIDIAG is not set
> # BR2_PACKAGE_MROUTED is not set
> # BR2_PACKAGE_MUTT is not set
> # BR2_PACKAGE_NBD is not set
> # BR2_PACKAGE_NCFTP is not set
> # BR2_PACKAGE_NEON is not set
>
> #
> # netkitbase requires a toolchain with RPC support
> #
> # BR2_PACKAGE_NETKITTELNET is not set
> # BR2_PACKAGE_NETPLUG is not set
> # BR2_PACKAGE_NETSNMP is not set
> # BR2_PACKAGE_NETSTAT_NAT is not set
>
> #
> # nfs-utils requires a toolchain with 'Enable RPC' selected
> #
> # BR2_PACKAGE_NTP is not set
> # BR2_PACKAGE_OLSR is not set
> # BR2_PACKAGE_OPENNTPD is not set
> # BR2_PACKAGE_OPENSSH is not set
> # BR2_PACKAGE_OPENSSL is not set
> # BR2_PACKAGE_OPENVPN is not set
>
> #
> # portmap requires a toolchain with 'Enable RPC' selected
> #
> # BR2_PACKAGE_PPPD is not set
> # BR2_PACKAGE_RP_PPPOE is not set
> # BR2_PACKAGE_PPTP_LINUX is not set
> # BR2_PACKAGE_PROFTPD is not set
>
> #
> # quagga suite
> #
> # BR2_PACKAGE_QUAGGA_ZEBRA is not set
> # BR2_PACKAGE_QUAGGA_BGPD is not set
> # BR2_PACKAGE_QUAGGA_RIPD is not set
> # BR2_PACKAGE_QUAGGA_RIPNGD is not set
> # BR2_PACKAGE_QUAGGA_OSPFD is not set
> # BR2_PACKAGE_QUAGGA_WATCHQUAGGA is not set
> # BR2_PACKAGE_QUAGGA_ISISD is not set
> # BR2_PACKAGE_RSYNC is not set
> # BR2_PACKAGE_SAMBA is not set
> # BR2_PACKAGE_SOCAT is not set
> # BR2_PACKAGE_SPAWN_FCGI is not set
> # BR2_PACKAGE_STUNNEL is not set
> # BR2_PACKAGE_TCPDUMP is not set
> # BR2_PACKAGE_DHCPDUMP is not set
> # BR2_PACKAGE_TFTPD is not set
> # BR2_PACKAGE_TN5250 is not set
> # BR2_PACKAGE_TTCP is not set
> # BR2_PACKAGE_UDPCAST is not set
> # BR2_PACKAGE_VPNC is not set
> # BR2_PACKAGE_VSFTPD is not set
> # BR2_PACKAGE_VTUN is not set
> # BR2_PACKAGE_WEBIF is not set
> # BR2_PACKAGE_WIRELESS_TOOLS is not set
> # BR2_PACKAGE_WPA_SUPPLICANT is not set
>
> #
> # Hardware handling / blockdevices and filesystem maintenance
> #
>
> #
> # dbus not available (need expat or libxml2)
> #
>
> #
> # dbus-glib needs dbus to be compiled with expat support
> #
> # BR2_PACKAGE_DEVMEM2 is not set
>
> #
> # dmraid requires a toolchain with LARGEFILE support
> #
> # BR2_PACKAGE_DOSFSTOOLS is not set
> # BR2_PACKAGE_LIBUUID is not set
>
> #
> # e2fsprogs requires a toolchain with LARGEFILE support
> #
> # BR2_PACKAGE_EEPROG is not set
> # BR2_PACKAGE_FCONFIG is not set
> # BR2_PACKAGE_FIS is not set
>
> #
> # libfuse requires a toolchain with LARGEFILE support
> #
> # BR2_PACKAGE_GADGETFS_TEST is not set
> # BR2_PACKAGE_HAL is not set
> # BR2_PACKAGE_HWDATA is not set
> # BR2_PACKAGE_I2C_TOOLS is not set
> # BR2_PACKAGE_INPUT_TOOLS is not set
> # BR2_PACKAGE_IOSTAT is not set
> # BR2_PACKAGE_LIBAIO is not set
> # BR2_PACKAGE_LIBRAW1394 is not set
> # BR2_PACKAGE_LIBUSB is not set
> # BR2_PACKAGE_LM_SENSORS is not set
>
> #
> # lvm2 requires a toolchain with LARGEFILE support
> #
> # BR2_PACKAGE_MDADM is not set
> # BR2_PACKAGE_MEMTESTER is not set
> # BR2_PACKAGE_MTD is not set
>
> #
> # ntfs-3g requires a toolchain with LARGEFILE and WCHAR support
> #
>
> #
> # ntfsprogs requires a toolchain with WCHAR support
> #
> # BR2_PACKAGE_PCIUTILS is not set
> # BR2_PACKAGE_SETSERIAL is not set
> # BR2_PACKAGE_SMARTMONTOOLS is not set
> # BR2_PACKAGE_USBMOUNT is not set
> # BR2_PACKAGE_USBUTILS is not set
> # BR2_PACKAGE_WIPE is not set
> # BR2_PACKAGE_XFSPROGS is not set
>
> #
> # Audio and video libraries and applications
> #
> # BR2_PACKAGE_ALSA_LIB is not set
>
> #
> # alsa-utils requires a toolchain with LARGEFILE support
> #
>
> #
> # asterisk	- disabled (required openssl and mpg123)
> #
> # BR2_PACKAGE_AUMIX is not set
> # BR2_PACKAGE_FLAC is not set
> # BR2_PACKAGE_GSTREAMER is not set
> # BR2_PACKAGE_LIBID3TAG is not set
> # BR2_PACKAGE_LIBMAD is not set
> # BR2_PACKAGE_LIBMMS is not set
> # BR2_PACKAGE_LIBMPD is not set
> # BR2_PACKAGE_LIBOGG is not set
> # BR2_PACKAGE_LIBSNDFILE is not set
> # BR2_PACKAGE_LIBTHEORA is not set
> # BR2_PACKAGE_LIBVORBIS is not set
> # BR2_PACKAGE_MADPLAY is not set
> # BR2_PACKAGE_MPG123 is not set
> # BR2_PACKAGE_MPLAYER is not set
> # BR2_PACKAGE_SPEEX is not set
> # BR2_PACKAGE_FESTIVAL is not set
>
> #
> # taglib requires a toolchain with C++ support enabled
> #
> # BR2_PACKAGE_VLC is not set
>
> #
> # Graphic libraries and applications (graphic/text)
> #
>
> #
> # text rendering libraries
> #
> # BR2_PACKAGE_NCURSES is not set
> # BR2_PACKAGE_NEWT is not set
> # BR2_PACKAGE_SLANG is not set
>
> #
> # text rendering applications
> #
> # BR2_PACKAGE_DIALOG is not set
>
> #
> # graphic libraries
> #
> # BR2_PACKAGE_DIRECTFB is not set
> # BR2_PACKAGE_FBDUMP is not set
> # BR2_PACKAGE_IMAGEMAGICK is not set
> # BR2_PACKAGE_JPEG is not set
> # BR2_PACKAGE_LIBART is not set
> # BR2_PACKAGE_LIBPNG is not set
> # BR2_PACKAGE_LIBUNGIF is not set
> # BR2_PACKAGE_LINUX_FUSION is not set
> # BR2_PACKAGE_PIXMAN is not set
> # BR2_PACKAGE_SDL is not set
> # BR2_PACKAGE_TIFF is not set
>
> #
> # busybox graphic applications
> #
>
> #
> # --> May be broken in busybox
> #
> # BR2_PACKAGE_FBV is not set
> # BR2_PACKAGE_FBSET is not set
>
> #
> # other GUIs
> #
>
> #
> # qt requires a toolchain with C++ support enabled
> #
> # BR2_PACKAGE_XORG7 is not set
>
> #
> # X libraries and helper libraries
> #
> # BR2_PACKAGE_ATK is not set
> # BR2_PACKAGE_CAIRO is not set
> # BR2_PACKAGE_PANGO is not set
> # BR2_PACKAGE_LIBDRM is not set
> # BR2_PACKAGE_LIBERATION is not set
> # BR2_PACKAGE_LIBGLIB12 is not set
> # BR2_PACKAGE_LIBGLIB2 is not set
> # BR2_PACKAGE_OPENMOTIF is not set
> # BR2_PACKAGE_FONTCONFIG is not set
> # BR2_PACKAGE_FREETYPE is not set
> # BR2_PACKAGE_TSLIB is not set
>
> #
> # webkit requires a toolchain with C++ support and WCHAR enabled
> #
>
> #
> # X Window managers
> #
> # BR2_PACKAGE_MATCHBOX is not set
>
> #
> # X applications
> #
> # BR2_PACKAGE_ALSAMIXERGUI is not set
> # BR2_PACKAGE_GQVIEW is not set
> # BR2_PACKAGE_GOB2 is not set
> # BR2_PACKAGE_LEAFPAD is not set
> # BR2_PACKAGE_PCMANFM is not set
> # BR2_PACKAGE_SYLPHEED is not set
> # BR2_PACKAGE_TORSMO is not set
> # BR2_PACKAGE_X11VNC is not set
> # BR2_PACKAGE_XPDF is not set
> # BR2_PACKAGE_XSTROKE is not set
>
> #
> # Compressors / decompressors
> #
> # BR2_PACKAGE_LZO is not set
> # BR2_PACKAGE_LZOP is not set
>
> #
> # lzma requires a toolchain with C++ support
> #
> # BR2_PACKAGE_LZMA_HOST is not set
> # BR2_PACKAGE_ZLIB is not set
>
> #
> # Package managers
> #
> # BR2_PACKAGE_IPKG is not set
> # BR2_PACKAGE_PORTAGE is not set
>
> #
> # Interpreter languages / Scripting
> #
> # BR2_PACKAGE_LUA is not set
> # BR2_PACKAGE_MICROPERL is not set
> # BR2_PACKAGE_PYTHON is not set
>
> #
> # ruby requires a toolchain with WCHAR support
> #
> # BR2_PACKAGE_TCL is not set
> # BR2_PACKAGE_PHP is not set
>
> #
> # XML handling
> #
> # BR2_PACKAGE_EXPAT is not set
> # BR2_PACKAGE_EZXML is not set
> # BR2_PACKAGE_LIBXML2 is not set
> # BR2_PACKAGE_LIBXSLT is not set
>
> #
> # xerces-c++ requires a toolchain with C++ support enabled
> #
>
> #
> # Java
> #
> # BR2_PACKAGE_CLASSPATH is not set
>
> #
> # Games
> #
> # BR2_PACKAGE_GNUCHESS is not set
> # BR2_PACKAGE_MAGICCUBE4D is not set
> # BR2_PACKAGE_PRBOOM is not set
> # BR2_PACKAGE_RUBIX is not set
> # BR2_PACKAGE_VICE is not set
> # BR2_PACKAGE_XBOARD is not set
>
> #
> # Target filesystem options
> #
> BR2_ROOTFS_PREFIX="rootfs"
> BR2_ROOTFS_SUFFIX=""
> BR2_ROOTFS_POST_BUILD_SCRIPT=""
>
> #
> # filesystem for target device
> #
> # BR2_TARGET_ROOTFS_CRAMFS is not set
> # BR2_TARGET_ROOTFS_CLOOP is not set
> BR2_TARGET_ROOTFS_EXT2=y
> BR2_TARGET_ROOTFS_EXT2_BLOCKS=0
> BR2_TARGET_ROOTFS_EXT2_INODES=0
> BR2_TARGET_ROOTFS_EXT2_RESBLKS=0
> BR2_TARGET_ROOTFS_EXT2_SQUASH=y
> BR2_TARGET_ROOTFS_EXT2_OUTPUT="$(IMAGE).ext2"
> BR2_TARGET_ROOTFS_EXT2_NONE=y
> # BR2_TARGET_ROOTFS_EXT2_GZIP is not set
> # BR2_TARGET_ROOTFS_EXT2_BZIP2 is not set
> # BR2_TARGET_ROOTFS_EXT2_LZMA is not set
> BR2_TARGET_ROOTFS_EXT2_COPYTO=""
> # BR2_TARGET_ROOTFS_JFFS2 is not set
> # BR2_TARGET_ROOTFS_SQUASHFS is not set
> # BR2_TARGET_ROOTFS_TAR is not set
> # BR2_TARGET_ROOTFS_CPIO is not set
> # BR2_TARGET_ROOTFS_INITRAMFS is not set
> # BR2_TARGET_ROOTFS_ROMFS is not set
>
> #
> # bootloader for target device
> #
> # BR2_TARGET_UBOOT is not set
>
> #
> # Kernel
> #
> BR2_KERNEL_none=y
> # BR2_KERNEL_LINUX_ADVANCED is not set
> # BR2_KERNEL_LINUX is not set
>
>
>
>
> plz help
>
>
> Regards
>
>
>
>   

-- 
Dan Pattison
Ethertek Circuits