[PATCH] ice1724: Fix surround on Chaintech AV-710

[Robert Hancock <hancockrwd@gmail.com>]

Fix the num_total_dacs setting for Chaintech AV710. The existing comment
that only PSDOUT0 is connected is correct, but since the card is using
packed AC97 mode to send 6 channels to the codec, num_total_dacs should be
set to 6 and not 2. This allows 6-channel surround to work. Also clarify
a comment regarding the additional WM8728 codec on this card (it's connected
to the SPDIF output and always receives the same data).

Signed-off-by: Robert Hancock <hancockrwd@gmail.com>

diff --git a/sound/pci/ice1712/amp.c b/sound/pci/ice1712/amp.c
index 3756430..bfcf989 100644
--- a/sound/pci/ice1712/amp.c
+++ b/sound/pci/ice1712/amp.c
@@ -52,11 +52,13 @@ static int __devinit snd_vt1724_amp_init(struct snd_ice1712 *ice)
 
 	/* only use basic functionality for now */
 
-	ice->num_total_dacs = 2;	/* only PSDOUT0 is connected */
+	/* VT1616 6ch codec connected to PSDOUT0 using packed mode */
+	ice->num_total_dacs = 6;
 	ice->num_total_adcs = 2;
 
-	/* Chaintech AV-710 has another codecs, which need initialization */
-	/* initialize WM8728 codec */
+	/* Chaintech AV-710 has another WM8728 codec connected to PSDOUT4
+	   (shared with the SPDIF output). Mixer control for this codec
+	   is not yet supported. */
 	if (ice->eeprom.subvendor == VT1724_SUBDEVICE_AV710) {
 		for (i = 0; i < ARRAY_SIZE(wm_inits); i += 2)
 			wm_put(ice, wm_inits[i], wm_inits[i+1]);