From mboxrd@z Thu Jan 1 00:00:00 1970 From: Manuel Knitza Date: Tue, 13 Oct 2009 14:27:08 +0000 Subject: Re: [lm-sensors] it87 / acpi / DSDT-dump (ASUS P5V2D-MX) Message-Id: <4AD48E3C.2030900@uni-konstanz.de> List-Id: References: <68676e00910130600u39fff342mf5db22c962f895de@mail.gmail.com> In-Reply-To: <68676e00910130600u39fff342mf5db22c962f895de@mail.gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lm-sensors@vger.kernel.org Jean Delvare schrieb: > On Tue, 13 Oct 2009 15:37:34 +0200, Luca Tettamanti wrote: >> So my advise to you is to use asus_atk0110; if you need to directly >> control the fans (not possible with the ACPI driver) then use >> "acpi_enforce_resources=3Dlax" and load it87 (and do *not* load >> asus_atk0110). >=20 > I thought the asus_atk0110 driver was being automatically? If I'm > correct then one needs to _blacklist_ the asus_atk0110 driver for it to > not load. >=20 i think in general, yes. but only if available. as a gentoo-user i=B4m=20 adjusting my kernel very often. so "blacklisting" for me is done=20 'automatically' by removing that module from my kernel-config to be=20 compiled as a module and then doing a "make modules && make=20 modules_install" (which suffices as only the modules i really need for=20 booting kernel are not compiled as modules, but into kernel) _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors