From mboxrd@z Thu Jan 1 00:00:00 1970 From: Asdo Subject: Re: Can't make virtio block driver work on Windows 2003 Date: Thu, 15 Oct 2009 13:42:43 +0200 Message-ID: <4AD70AB3.8040803@shiftmail.org> References: <4AD60FDB.7010603@shiftmail.org> <4AD6AFB9.8070103@redhat.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: kvm@vger.kernel.org To: Vadim Rozenfeld Return-path: Received: from mx2.isti.cnr.it ([194.119.192.4]:1758 "EHLO mx2.isti.cnr.it" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S935145AbZJOLnr (ORCPT ); Thu, 15 Oct 2009 07:43:47 -0400 Received: from conversionlocal.isti.cnr.it by mx.isti.cnr.it (PMDF V6.4 #31773) id <01NEX5FTF2ZKCSRP85@mx.isti.cnr.it> for kvm@vger.kernel.org; Thu, 15 Oct 2009 13:42:44 +0200 (MEST) In-reply-to: <4AD6AFB9.8070103@redhat.com> Sender: kvm-owner@vger.kernel.org List-ID: Vadim Rozenfeld wrote: > On 10/14/2009 07:52 PM, Asdo wrote: >> ... >> So I tried adding another drive, a virtio one, (a new 100MB file at >> host side) to the virtual machine and rebooting. >> >> A first problem is that Windows does not detect the new device upon >> boot or Add Hardware scan. > Check PCI devices with "info pci". You must have "SCSI controller: PCI > device 1af4:1001" device reported. It's not there. Does this make it a KVM bug? I'm attaching the PCI32.EXE output at the bottom of this email BTW I would probably be able to switch to virtio anyway on this installation of Windows 2003, if I knew the way to insert the viostor driver into the windows boot image (windows's initrd), because if I set the first disk hda as virtio then kvm really makes it virtio (so maybe it's a configuration with one IDE and one virtio that does not work in KVM) and Windows bluescreens at boot. However I don't know how to insert the viostor driver in the windows boot image. Any suggestions? >> >> Here is the kvm commandline (it's complex because it comes from >> libvirt): >> >> /usr/local/kvm/bin/qemu-system-x86_64 -S -M pc -m 4096-smp 4 -name >> winserv2 -uuid xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -monitor pty >> -boot c -drive >> file=/virtual_machines/kvm/nfsimport/winserv2.raw,if=ide,index=0,boot=on >> -drive >> file=/virtual_machines/kvm/nfsimport/zerofile,if=virtio,index=1 -net >> nic,macaddr=xx:xx:xx:xx:xx:xx,vlan=0,model=virtio -net >> tap,fd=25,vlan=0 -serial none -parallel none -usb -vnc 127.0.0.1:4 >> Craig Hart's PCI+AGP bus sniffer, Version 1.6, freeware made in 1996-2005. Searching for Devices using CFG Mechanism 1 [OS: Win 2003 Service Pack 1] Bus 0 (PCI), Device Number 0, Device Function 0 Vendor 8086h Intel Corporation Device 1237h 82441FX 440FX (Natoma) System Controller Rev 2 (SU053) Command 0000h (Bus Access Disabled!!) Status 0000h Revision 02h, Header Type 00h, Bus Latency Timer 00h Self test 00h (Self test not supported) PCI Class Bridge, type PCI to HOST Subsystem ID 11001AF4h Unknown Subsystem Vendor 1AF4h Unknown Bus 0 (PCI), Device Number 1, Device Function 0 Vendor 8086h Intel Corporation Device 7000h 82371SB PIIX3 ISA Bridge Command 0007h (I/O Access, Memory Access, BusMaster) Status 0200h (Medium Timing) Revision 00h, Header Type 80h, Bus Latency Timer 00h Self test 00h (Self test not supported) PCI Class Bridge, type PCI to ISA Subsystem ID 11001AF4h Unknown Subsystem Vendor 1AF4h Unknown Bus 0 (PCI), Device Number 1, Device Function 1 Vendor 8086h Intel Corporation Device 7010h 82371SB PIIX3 EIDE Controller Command 0007h (I/O Access, Memory Access, BusMaster) Status 0280h (Supports Back-To-Back Trans., Medium Timing) Revision 00h, Header Type 00h, Bus Latency Timer 00h Self test 00h (Self test not supported) PCI Class Storage, type IDE (ATA) PCI EIDE Controller Features : BusMaster EIDE is supported Primary Channel is at I/O Port 01F0h and IRQ 14 Secondary Channel is at I/O Port 0170h and IRQ 15 Subsystem ID 11001AF4h Unknown Subsystem Vendor 1AF4h Unknown Address 4 is an I/O Port : 0000C000h Bus 0 (PCI), Device Number 1, Device Function 2 Vendor 8086h Intel Corporation Device 7020h 82371SB PIIX3 USB Controller Rev 1 (SU093) Command 0007h (I/O Access, Memory Access, BusMaster) Status 0000h Revision 01h, Header Type 00h, Bus Latency Timer 00h Self test 00h (Self test not supported) PCI Class Serial, type USB (UHCI) Subsystem ID 11001AF4h Unknown Subsystem Vendor 1AF4h Unknown Address 4 is an I/O Port : 0000C020h System IRQ 11, INT# D Bus 0 (PCI), Device Number 1, Device Function 3 Vendor 8086h Intel Corporation Device 7113h 82371MB PIIX4M Power Management Controller Command 0000h (Bus Access Disabled!!) Status 0280h (Supports Back-To-Back Trans., Medium Timing) Revision 03h, Header Type 00h, Bus Latency Timer 00h Self test 00h (Self test not supported) PCI Class Bridge, type PCI to Other Subsystem ID 11001AF4h Unknown Subsystem Vendor 1AF4h Unknown System IRQ 9, INT# A Bus 0 (PCI), Device Number 2, Device Function 0 Vendor 1013h Cirrus Logic Device 00B8h CL-GD5446 PCI Command 0007h (I/O Access, Memory Access, BusMaster) Status 0000h Revision 00h, Header Type 00h, Bus Latency Timer 00h Self test 00h (Self test not supported) PCI Class Display, type VGA Subsystem ID 11001AF4h Unknown Subsystem Vendor 1AF4h Unknown Address 0 is a Memory Address (anywhere in 0-4Gb, Prefetchable) : F0000000h Address 1 is a Memory Address (anywhere in 0-4Gb) : F2000000h Bus 0 (PCI), Device Number 3, Device Function 0 Vendor 1AF4h Unknown Device 1000h Unknown Command 0007h (I/O Access, Memory Access, BusMaster) Status 0000h Revision 00h, Header Type 00h, Bus Latency Timer 00h Self test 00h (Self test not supported) PCI Class Network, type Ethernet Subsystem ID 00011AF4h Unknown Subsystem Vendor 1AF4h Unknown Address 0 is an I/O Port : 0000C040h System IRQ 10, INT# A Bus 0 (PCI), Device Number 4, Device Function 0 Vendor 1AF4h Unknown Device 1002h Unknown Command 0001h (I/O Access) Status 0000h Revision 00h, Header Type 00h, Bus Latency Timer 00h Self test 00h (Self test not supported) PCI Class Memory, type RAM Subsystem ID 00051AF4h Unknown Subsystem Vendor 1AF4h Unknown Address 0 is an I/O Port : 0000C060h System IRQ 11, INT# A IRQ Summary: IRQs 9,10,11,14,15 are used by PCI devices Shared IRQs: IRQ 11 is shared by 2 PCI Devices