From: Jeff Angielski <jeff@theptrgroup.com>
To: Linuxppc-dev@lists.ozlabs.org, Joel Lord <Lord@Assurtech.com>
Subject: c67x00 with mpc85xx
Date: Fri, 16 Oct 2009 15:44:48 -0400 [thread overview]
Message-ID: <4AD8CD30.6020003@theptrgroup.com> (raw)
We are using the Cypress USB Host (CY7C67300) with a Freescale MPC8544
and can only get it to work if we add a delay after writing to the
hardware registers through the HPI.
We tried playing with the SCY settings in the GPCM but nothing helps.
It is only when we add usecs of delay after our write() functions that
the hardware works.
The datasheets make no mention of any write-then-read requirements and
the FAEs are stumped right now.
I was just hoping somebody had some experiencing interfacing this chip
to the PowerPC and that they could offer some suggestions or ideas.
TIA,
Jeff
--
Jeff Angielski
The PTR Group
www.theptrgroup.com
next reply other threads:[~2009-10-16 19:44 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-16 19:44 Jeff Angielski [this message]
2009-11-09 19:23 ` c67x00 with mpc85xx Grant Likely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4AD8CD30.6020003@theptrgroup.com \
--to=jeff@theptrgroup.com \
--cc=Linuxppc-dev@lists.ozlabs.org \
--cc=Lord@Assurtech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.