From: Tom <Tom.Rix@windriver.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] ARM pull request
Date: Sun, 18 Oct 2009 15:21:40 -0500 [thread overview]
Message-ID: <4ADB78D4.2060609@windriver.com> (raw)
In-Reply-To: <20091018195640.C02213F6CE@gemini.denx.de>
Wolfgang Denk wrote:
> Dear Tom,
>
> In message <4ADA8080.3060800@windriver.com> you wrote:
>> The following changes since commit a380279b2abe130c2d3d2c8de36f8ff98bc6b3b0:
>> Daniel Gorsulowski (1):
>> at91: Update MEESC board support
>>
>> are available in the git repository at:
>>
>> git://git.denx.de/u-boot-arm master-sync
>>
>> Eric Benard (3):
>> CPU9260 : fix machine ID when using a CPU9G20.
>> fix CPU9260/CPU9G20 compile warnings
>> main.c: In function 'abortboot':
>
> Ummm... This is a terrible commit message, and even worse, I cannot
> find any trace of this patch in the mailing lists? Where is it coming
> from?
>
>> Minkyu Kang (4):
>> s5pc1xx: support Samsung s5pc1xx SoC
>> s5pc1xx: support onenand driver
>> s5pc1xx: support serial driver
>> s5pc1xx: add support SMDKC100 board
>>
>> Nishanth Menon (4):
>> OMAP3: export enable_gpmc_cs_config to board files
>> OMAP3: fix warnings when NAND/ONENAND is not used
>> OMAP3: Fix SDRC init
>> TI OMAP3: make gpmc_config as const
>>
>> Sandeep Paulraj (13):
>> TI DaVinci DM355: Fix Compilation warning for DM355 EVM
>> TI DaVinci DM365: Fix Compilation warning for DM365 EVM
>> TI DaVinci DM646x: Adding initial support for DM6467 EVM
>> TI: DaVinci: DM355 Leopard board support
>> TI DaVinci: Maintainer for DM355 and DM365 EVM
>> TI: OMAP3: Remove SZ_xx references
>> TI DaVinci DM355: Add Config option for 64 bit Support
>> TI DaVinci DM365: Add Config option for 64 bit Support
>> TI DaVinci DVEVM: Add Config option for 64 bit Support
>> TI DaVinci Sonata: Add Config option for 64 bit Support
>> TI DaVinci: DM355 Leopard: Fix compilation warning
>> TI DaVinci: Fix DM6467 EVM Compilation Warning
>> TI DaVinci: Adding Copyright for DM365 EVM
>>
>> Simon Kagstrom (1):
>> arm926ejs: 8-byte align stack to avoid LDRD/STRD problems
>>
>> Steve Sakoman (2):
>> TI: OMAP3: Refactors the SM911x driver
>
> And where is this patch coming from? Again, I canot see a trace of it
> in the mailing list archive, and anyway, it must go through the net
> custodian, or at least have Ben's blessing (Acked-by: line).
>
This came from the last ti pull.
>
>> OMAP3: Update Overo and Beagle environment
>>
>> Tom Rix (2):
>> Zoom2 Fix serial gpmc setup
>> TI OMAP3 SDP3430: Initial Support
>>
>> kevin.morfitt at fearnside-systems.co.uk (5):
>> CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards
>> Clean-up of cpu_arm920t and cpu_arm920t_s3c24x0 code
>> Clean-up of s3c24x0 header files
>> Clean-up of s3c24x0 drivers excluding nand driver
>> Clean-up of s3c24x0 nand driver
>>
>> MAINTAINERS | 12 +
>> MAKEALL | 4 +
>> Makefile | 12 +
>> board/davinci/dm355evm/dm355evm.c | 4 +-
>> board/davinci/dm355leopard/Makefile | 52 ++
>> board/davinci/dm355leopard/config.mk | 6 +
>> board/davinci/dm355leopard/dm355leopard.c | 98 +++
>> board/davinci/dm365evm/dm365evm.c | 5 +-
>> board/davinci/dm6467evm/Makefile | 52 ++
>> board/davinci/dm6467evm/config.mk | 2 +
>> board/davinci/dm6467evm/dm6467evm.c | 31 +
>> board/eukrea/cpu9260/cpu9260.c | 2 +-
>> board/logicpd/zoom2/zoom2.c | 5 +-
>> board/mpl/vcma9/vcma9.c | 13 +-
>> board/mpl/vcma9/vcma9.h | 20 +-
>> board/samsung/smdk2400/smdk2400.c | 5 +-
>> board/samsung/smdk2410/smdk2410.c | 5 +-
>> board/samsung/smdkc100/Makefile | 55 ++
>> board/samsung/smdkc100/config.mk | 16 +
>> board/samsung/smdkc100/lowlevel_init.S | 215 +++++
>> board/samsung/smdkc100/mem_setup.S | 197 +++++
>> board/samsung/smdkc100/onenand.c | 83 ++
>> board/samsung/smdkc100/smdkc100.c | 51 ++
>> board/sbc2410x/sbc2410x.c | 7 +-
>> board/ti/sdp3430/Makefile | 49 ++
>> board/ti/sdp3430/config.mk | 33 +
>> board/ti/sdp3430/sdp.c | 204 +++++
>> board/ti/sdp3430/sdp.h | 417 +++++++++
>> board/trab/cmd_trab.c | 12 +-
>> board/trab/rs485.c | 12 +-
>> board/trab/trab.c | 17 +-
>> board/trab/trab_fkt.c | 26 +-
>> board/trab/tsc2000.c | 17 +-
>> board/trab/tsc2000.h | 4 +-
>> board/trab/vfd.c | 12 +-
>> common/serial.c | 18 +
>> cpu/arm920t/s3c24x0/interrupts.c | 4 +-
>> cpu/arm920t/s3c24x0/speed.c | 42 +-
>> cpu/arm920t/s3c24x0/timer.c | 110 ++--
>> cpu/arm920t/s3c24x0/usb.c | 30 +-
>> cpu/arm920t/s3c24x0/usb_ohci.c | 1323
>> +++++++++++++++--------------
>> cpu/arm920t/s3c24x0/usb_ohci.h | 209 +++---
>> cpu/arm920t/start.S | 63 +-
>> cpu/arm926ejs/start.S | 1 +
>> cpu/arm_cortexa8/omap3/mem.c | 21 +-
>> cpu/arm_cortexa8/omap3/sys_info.c | 2 +-
>> cpu/arm_cortexa8/s5pc1xx/Makefile | 53 ++
>> cpu/arm_cortexa8/s5pc1xx/cache.c | 43 +
>> cpu/arm_cortexa8/s5pc1xx/clock.c | 308 +++++++
>> cpu/arm_cortexa8/s5pc1xx/cpu_info.c | 57 ++
>> cpu/arm_cortexa8/s5pc1xx/reset.S | 47 +
>> cpu/arm_cortexa8/s5pc1xx/timer.c | 195 +++++
>> doc/README.s5pc1xx | 56 ++
>> drivers/i2c/s3c24x0_i2c.c | 273 +++---
>> drivers/mtd/nand/s3c2410_nand.c | 62 +-
>> drivers/mtd/onenand/Makefile | 1 +
>> drivers/mtd/onenand/samsung.c | 636 ++++++++++++++
>> drivers/net/smc911x.c | 12 +-
>> drivers/rtc/s3c24x0_rtc.c | 130 ++--
>> drivers/serial/Makefile | 1 +
>> drivers/serial/serial_s3c24x0.c | 160 ++--
>> drivers/serial/serial_s5pc1xx.c | 195 +++++
>> include/asm-arm/arch-davinci/hardware.h | 2 +
>> include/asm-arm/arch-omap3/cpu.h | 1 +
>> include/asm-arm/arch-omap3/mem.h | 8 +-
>> include/asm-arm/arch-omap3/sys_proto.h | 2 +
>> include/asm-arm/arch-s5pc1xx/clk.h | 32 +
>> include/asm-arm/arch-s5pc1xx/clock.h | 94 ++
>> include/asm-arm/arch-s5pc1xx/cpu.h | 72 ++
>> include/asm-arm/arch-s5pc1xx/gpio.h | 129 +++
>> include/asm-arm/arch-s5pc1xx/power.h | 42 +
>> include/asm-arm/arch-s5pc1xx/pwm.h | 59 ++
>> include/asm-arm/arch-s5pc1xx/uart.h | 47 +
>> include/configs/cpu9260.h | 1 +
>> include/configs/cpuat91.h | 4 +-
>> include/configs/davinci_dm355evm.h | 1 +
>> include/configs/davinci_dm355leopard.h | 162 ++++
>> include/configs/davinci_dm365evm.h | 2 +
>> include/configs/davinci_dm6467evm.h | 132 +++
>> include/configs/davinci_dvevm.h | 1 +
>> include/configs/davinci_sonata.h | 1 +
>> include/configs/devkit8000.h | 15 +-
>> include/configs/omap3_beagle.h | 42 +-
>> include/configs/omap3_evm.h | 15 +-
>> include/configs/omap3_overo.h | 42 +-
>> include/configs/omap3_pandora.h | 15 +-
>> include/configs/omap3_sdp3430.h | 369 ++++++++
>> include/configs/omap3_zoom1.h | 15 +-
>> include/configs/omap3_zoom2.h | 15 +-
>> include/configs/sbc2410x.h | 4 +-
>> include/configs/smdk2400.h | 4 +-
>> include/configs/smdk2410.h | 4 +-
>> include/configs/smdkc100.h | 242 ++++++
>> include/configs/trab.h | 12 +-
>> include/linux/mtd/onenand.h | 1 +
>> include/linux/mtd/onenand_regs.h | 4 +
>> include/linux/mtd/samsung_onenand.h | 131 +++
>> include/s3c2400.h | 494 +----------
>> include/s3c2410.h | 159 +---
>> include/s3c24x0.h | 605 ++------------
>> include/serial.h | 7 +
>> 101 files changed, 6329 insertions(+), 2465 deletions(-)
>> create mode 100644 board/davinci/dm355leopard/Makefile
>> create mode 100644 board/davinci/dm355leopard/config.mk
>> create mode 100644 board/davinci/dm355leopard/dm355leopard.c
>> create mode 100644 board/davinci/dm6467evm/Makefile
>> create mode 100644 board/davinci/dm6467evm/config.mk
>> create mode 100644 board/davinci/dm6467evm/dm6467evm.c
>> create mode 100644 board/samsung/smdkc100/Makefile
>> create mode 100644 board/samsung/smdkc100/config.mk
>> create mode 100644 board/samsung/smdkc100/lowlevel_init.S
>> create mode 100644 board/samsung/smdkc100/mem_setup.S
>> create mode 100644 board/samsung/smdkc100/onenand.c
>> create mode 100644 board/samsung/smdkc100/smdkc100.c
>> create mode 100644 board/ti/sdp3430/Makefile
>> create mode 100644 board/ti/sdp3430/config.mk
>> create mode 100644 board/ti/sdp3430/sdp.c
>> create mode 100644 board/ti/sdp3430/sdp.h
>> create mode 100644 cpu/arm_cortexa8/s5pc1xx/Makefile
>> create mode 100644 cpu/arm_cortexa8/s5pc1xx/cache.c
>> create mode 100644 cpu/arm_cortexa8/s5pc1xx/clock.c
>> create mode 100644 cpu/arm_cortexa8/s5pc1xx/cpu_info.c
>> create mode 100644 cpu/arm_cortexa8/s5pc1xx/reset.S
>> create mode 100644 cpu/arm_cortexa8/s5pc1xx/timer.c
>> create mode 100644 doc/README.s5pc1xx
>> create mode 100644 drivers/mtd/onenand/samsung.c
>> create mode 100644 drivers/serial/serial_s5pc1xx.c
>> create mode 100644 include/asm-arm/arch-s5pc1xx/clk.h
>> create mode 100644 include/asm-arm/arch-s5pc1xx/clock.h
>> create mode 100644 include/asm-arm/arch-s5pc1xx/cpu.h
>> create mode 100644 include/asm-arm/arch-s5pc1xx/gpio.h
>> create mode 100644 include/asm-arm/arch-s5pc1xx/power.h
>> create mode 100644 include/asm-arm/arch-s5pc1xx/pwm.h
>> create mode 100644 include/asm-arm/arch-s5pc1xx/uart.h
>> create mode 100644 include/configs/davinci_dm355leopard.h
>> create mode 100644 include/configs/davinci_dm6467evm.h
>> create mode 100644 include/configs/omap3_sdp3430.h
>> create mode 100644 include/configs/smdkc100.h
>> create mode 100644 include/linux/mtd/samsung_onenand.h
>
> Sorry, put on hold until I understand what's going on with the two
> patches above.
>
I will fix the subject in at91 patch
and remove the overo net patch
and restore the author of the 3430 sdp patch with a rebase.
I will resend the pull request when done.
Tom
> Best regards,
>
> Wolfgang Denk
>
next prev parent reply other threads:[~2009-10-18 20:21 UTC|newest]
Thread overview: 162+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-18 2:42 [U-Boot] ARM pull request Tom
2009-10-18 7:02 ` Dirk Behme
2009-10-18 7:12 ` Dirk Behme
2009-10-18 12:51 ` Minkyu Kang
2009-10-18 15:20 ` Tom
2009-10-18 19:56 ` Wolfgang Denk
2009-10-18 20:21 ` Tom [this message]
2009-10-18 20:28 ` Wolfgang Denk
2009-10-19 0:29 ` Paulraj, Sandeep
2009-10-19 8:29 ` Wolfgang Denk
-- strict thread matches above, loose matches on Subject: below --
2011-06-23 6:34 Albert ARIBAUD
2011-06-23 13:40 ` Wolfgang Denk
2011-06-23 17:36 ` Albert ARIBAUD
2010-05-30 13:52 Tom Rix
2010-05-30 19:43 ` Wolfgang Denk
2010-05-31 4:43 ` Hiremath, Vaibhav
2010-05-31 19:05 ` Marek Vasut
2010-06-07 12:58 ` Tom Rix
2010-05-01 21:50 Tom Rix
2010-05-04 20:56 ` Wolfgang Denk
2010-04-05 12:55 Tom
2010-04-07 22:12 ` Wolfgang Denk
2010-03-22 21:46 Tom
2010-03-22 22:09 ` Wolfgang Denk
2010-03-08 13:55 [U-Boot] Arm " Tom
2010-03-09 14:29 ` Wolfgang Denk
2010-03-07 22:01 [U-Boot] ARM " Tom
2010-03-07 20:37 Tom
2010-02-12 20:06 Tom
2010-02-17 21:29 ` Wolfgang Denk
2010-01-23 15:18 Tom
2010-01-23 16:47 ` Wolfgang Denk
2010-01-23 16:57 ` Tom
2010-01-23 20:51 ` Wolfgang Denk
2010-01-28 5:58 ` Prafulla Wadaskar
2010-01-28 9:41 ` Wolfgang Denk
2010-01-06 18:51 Tom
2010-01-12 22:47 ` Wolfgang Denk
2009-11-30 1:05 Tom
2009-12-01 11:13 ` Wolfgang Denk
2009-12-01 14:34 ` Tom
2009-11-24 15:19 Tom
2009-11-24 22:23 ` Wolfgang Denk
2009-11-04 19:41 [U-Boot] status several (bugfix) patches Remy Bohmer
2009-11-04 19:47 ` Tom
2009-11-04 19:56 ` Remy Bohmer
2009-11-07 23:21 ` [U-Boot] ARM pull request Tom
2009-11-09 21:46 ` Wolfgang Denk
2009-11-04 0:00 [U-Boot] ARM LED weak symbols Tom Rix
2009-11-04 0:00 ` [U-Boot] [PATCH 1/2] ARM Conditionally compile board LED functions Tom Rix
2009-11-04 0:00 ` [U-Boot] [PATCH 2/2] ARM: fix build error with gcc-4.4.2 about inline function declared weak Tom Rix
2009-11-05 20:19 ` Wolfgang Denk
2009-11-05 20:39 ` Tom
2009-11-05 22:38 ` Wolfgang Denk
2009-11-10 19:34 ` Tom
2009-11-10 22:45 ` Wolfgang Denk
2009-11-12 0:43 ` [U-Boot] ARM pull request Tom
2009-11-15 21:39 ` Wolfgang Denk
2009-10-13 2:02 Tom Rix
2009-10-13 2:01 Tom
2009-09-05 1:36 [U-Boot] ARM Pull Request Jean-Christophe PLAGNIOL-VILLARD
2009-09-05 5:37 ` Dirk Behme
2009-09-05 15:37 ` Jean-Christophe PLAGNIOL-VILLARD
2009-09-06 7:12 ` Dirk Behme
2009-09-06 13:16 ` Jean-Christophe PLAGNIOL-VILLARD
2009-09-06 17:59 ` Dirk Behme
2009-09-06 18:37 ` Peter Tyser
2009-09-06 18:40 ` Dirk Behme
2009-09-06 19:09 ` Peter Tyser
2009-09-06 20:21 ` Tom
2009-09-06 21:18 ` Wolfgang Denk
2009-09-06 22:30 ` Tom
2009-09-07 16:01 ` Dirk Behme
2009-09-06 21:16 ` Wolfgang Denk
2009-09-06 20:31 ` Jean-Christophe PLAGNIOL-VILLARD
2009-09-06 9:18 ` Heiko Schocher
2009-09-06 10:05 ` Heiko Schocher
2009-09-07 21:20 ` Wolfgang Denk
2009-09-07 21:18 ` Wolfgang Denk
2009-08-17 23:49 Jean-Christophe PLAGNIOL-VILLARD
2009-08-18 11:54 ` Wolfgang Denk
2009-08-08 10:24 Jean-Christophe PLAGNIOL-VILLARD
2009-08-09 21:49 ` Wolfgang Denk
2009-08-03 7:29 Jean-Christophe PLAGNIOL-VILLARD
2009-08-03 8:20 ` Dirk Behme
2009-08-03 9:44 ` Wolfgang Denk
2009-07-22 22:30 Jean-Christophe PLAGNIOL-VILLARD
2009-07-22 23:04 ` Wolfgang Denk
2009-07-22 23:43 ` Jean-Christophe PLAGNIOL-VILLARD
2009-07-23 17:18 ` Wolfgang Denk
2009-07-24 4:34 ` Prafulla Wadaskar
2009-07-29 17:45 ` Prafulla Wadaskar
2009-07-29 22:31 ` Wolfgang Denk
2009-08-07 6:48 ` Prafulla Wadaskar
2009-07-23 5:39 ` Prafulla Wadaskar
2009-07-23 9:38 ` Wolfgang Denk
2009-07-23 16:21 ` Dirk Behme
2009-07-23 19:15 ` Jean-Christophe PLAGNIOL-VILLARD
2009-07-23 20:14 ` Wolfgang Denk
2009-07-23 20:22 ` Jean-Christophe PLAGNIOL-VILLARD
2009-07-23 20:42 ` Wolfgang Denk
2009-07-27 19:56 ` Jean-Christophe PLAGNIOL-VILLARD
2009-07-27 20:14 ` Wolfgang Denk
2009-07-27 8:16 ` Heiko Schocher
2009-07-27 20:07 ` Jean-Christophe PLAGNIOL-VILLARD
2009-07-28 7:31 ` Heiko Schocher
2009-07-12 21:40 Jean-Christophe PLAGNIOL-VILLARD
2009-07-13 21:45 ` Wolfgang Denk
2009-07-06 19:55 Jean-Christophe PLAGNIOL-VILLARD
2009-07-07 20:20 ` Wolfgang Denk
2009-07-07 21:31 ` Jean-Christophe PLAGNIOL-VILLARD
2009-07-07 21:42 ` Wolfgang Denk
2009-07-07 21:48 ` Jean-Christophe PLAGNIOL-VILLARD
2009-06-09 23:31 Jean-Christophe PLAGNIOL-VILLARD
2009-06-10 21:54 ` Wolfgang Denk
2009-06-11 5:22 ` Prafulla Wadaskar
2009-06-11 8:00 ` Wolfgang Denk
2009-06-11 9:18 ` Prafulla Wadaskar
2009-06-11 10:02 ` Magnus Lilja
2009-06-11 15:02 ` Wolfgang Denk
2009-05-15 9:03 [U-Boot] ARM pull Request Jean-Christophe PLAGNIOL-VILLARD
2009-05-15 19:09 ` Wolfgang Denk
2009-04-30 7:10 [U-Boot] ARM Pull Request Jean-Christophe PLAGNIOL-VILLARD
2009-04-30 21:05 ` Wolfgang Denk
2009-04-05 10:56 Jean-Christophe PLAGNIOL-VILLARD
2009-04-05 12:14 ` Dirk Behme
2009-04-07 19:51 ` Wolfgang Denk
2009-04-05 21:06 ` Wolfgang Denk
2009-03-30 16:42 Jean-Christophe PLAGNIOL-VILLARD
2009-03-30 16:47 ` Jean-Christophe PLAGNIOL-VILLARD
2009-04-01 22:25 ` Wolfgang Denk
2009-03-29 21:09 Jean-Christophe PLAGNIOL-VILLARD
2009-03-29 21:31 ` Wolfgang Denk
2009-03-29 21:16 ` Jean-Christophe PLAGNIOL-VILLARD
2009-03-30 13:33 ` Dirk Behme
2009-03-30 15:08 ` Jean-Christophe PLAGNIOL-VILLARD
2009-03-30 19:33 ` Dirk Behme
2009-03-30 19:49 ` Wolfgang Denk
2009-03-30 20:28 ` Jean-Christophe PLAGNIOL-VILLARD
2009-03-31 15:44 ` Dirk Behme
2009-03-25 21:26 Jean-Christophe PLAGNIOL-VILLARD
2009-03-26 21:22 ` Wolfgang Denk
2009-03-26 23:24 ` Dirk Behme
2009-03-13 22:20 Jean-Christophe PLAGNIOL-VILLARD
2009-03-15 21:10 ` Wolfgang Denk
2009-02-22 17:33 Jean-Christophe PLAGNIOL-VILLARD
2009-02-22 17:49 ` Dirk Behme
2009-02-22 23:30 ` Wolfgang Denk
2009-02-22 21:59 ` Wolfgang Denk
2009-02-18 3:26 Jean-Christophe PLAGNIOL-VILLARD
2009-02-18 23:49 ` Wolfgang Denk
2009-02-01 13:32 Jean-Christophe PLAGNIOL-VILLARD
2009-02-01 20:39 ` Wolfgang Denk
2008-11-21 0:46 [U-Boot] ARM pull request Jean-Christophe PLAGNIOL-VILLARD
2008-11-23 12:59 ` Dirk Behme
2008-11-25 11:05 ` Wolfgang Denk
2008-11-02 16:12 [U-Boot] ARM Pull request Jean-Christophe PLAGNIOL-VILLARD
2008-11-08 23:33 ` Wolfgang Denk
2008-11-09 20:22 ` Alessandro Rubini
2008-10-08 17:09 [U-Boot] ARM Pull Request Jean-Christophe PLAGNIOL-VILLARD
2008-10-12 21:57 ` Wolfgang Denk
2008-10-06 12:29 [U-Boot] Arm Pull request Jean-Christophe PLAGNIOL-VILLARD
2008-09-15 19:16 [U-Boot] ARM Pull Request Jean-Christophe PLAGNIOL-VILLARD
2008-09-15 22:11 ` Wolfgang Denk
2008-09-16 8:14 ` Jean-Christophe PLAGNIOL-VILLARD
2008-09-16 10:24 ` Wolfgang Denk
2008-09-11 23:29 Jean-Christophe PLAGNIOL-VILLARD
2008-09-12 13:22 ` Wolfgang Denk
2008-08-25 21:04 [U-Boot] ARM Pull request Jean-Christophe PLAGNIOL-VILLARD
2008-08-25 21:46 ` Wolfgang Denk
2008-08-26 5:59 ` Jens Gehrlein
2008-08-26 21:19 ` Wolfgang Denk
2008-08-11 23:41 [U-Boot] arm pull request Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4ADB78D4.2060609@windriver.com \
--to=tom.rix@windriver.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.