From: Jan Christoph Uhde <UhdeJC@gmx.net>
To: linux-ide@vger.kernel.org
Subject: disk with ata_piix freezes
Date: Mon, 19 Oct 2009 12:12:12 +0200 [thread overview]
Message-ID: <4ADC3B7C.2070207@gmx.net> (raw)
Hi,
my net-book suffers serious disk freezes. I am using the ata_piix driver fom
the latest ubuntu karmic kernel and have tried almost everything i could find
.. every kernel option from force_pcs to .. acpi=.+ , pci=.+
and i would really like to keep acpi .. :(
Since google will not help this time i will ask here for help:
ata port 1 device 0
action = 0x6 i am to stupid to read the acton from libata.h:(
exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
cmd ca/00:28:67:b5:7e/00:00:00:00:00/e0 tag 0 dma 20480 out
res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
status: { DRDY }
I am willing to give you any information you request. but please keep in mind
that i am a stupid user and may need some time or might fail without proper
description on how to acquire the data.
The Problem:
dmesg | grep ata -A1 #A1 for the res line
[ 3143.592481] ata2: port disabled. ignoring.
[ 3143.592645] ata_piix 0000:00:1f.2: PCI INT B disabled
[ 3143.608280] ehci_hcd 0000:00:1d.7: PCI INT A disabled
--
[ 3144.210084] ata_piix 0000:00:1f.2: restoring config space at offset 0xf
(was 0x200, writing 0x2ff)
[ 3144.210213] ath9k 0000:02:00.0: restoring config space at offset 0xf (was
0x1ff, writing 0x10b)
--
[ 3144.307572] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3144.307581] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 3144.307624] ath9k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
--
[ 3145.596412] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
[ 3145.596420] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
[ 3145.728444] ata1.00: configured for UDMA/100
[ 3145.856038] usb 1-8: reset high speed USB device using ehci_hcd and address 3
--
[ 3346.989164] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 3346.989463] ata1.00: cmd ca/00:28:67:b5:7e/00:00:00:00:00/e0 tag 0 dma
20480 out
[ 3346.989470] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4
(timeout)
[ 3346.990072] ata1.00: status: { DRDY }
[ 3352.032100] ata1: link is slow to respond, please be patient (ready=0)
[ 3357.016139] ata1: device not ready (errno=-16), forcing hardreset
[ 3357.016168] ata1: soft resetting link
[ 3357.196609] ata1.00: configured for UDMA/100
[ 3357.196631] ata1.00: device reported invalid CHS sector 0
[ 3357.196664] ata1: EH complete
[ 3719.768899] wlan2: deauthenticated from 00:1f:1f:52:d6:b4 (Reason: 7)
--
[13235.976559] ata_piix 0000:00:1f.2: PCI INT B disabled
[13235.992311] ehci_hcd 0000:00:1d.7: PCI INT A disabled
--
[13236.686088] ata_piix 0000:00:1f.2: restoring config space at offset 0xf
(was 0x200, writing 0x2ff)
[13236.686216] ath9k 0000:02:00.0: restoring config space at offset 0xf (was
0x1ff, writing 0x10b)
--
[13236.784226] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[13236.784235] ata_piix 0000:00:1f.2: setting latency timer to 64
[13236.784278] ath9k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
--
[13237.960411] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
[13237.960419] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
[13237.972443] ata1.00: configured for UDMA/100
[13238.228035] usb 1-8: reset high speed USB device using ehci_hcd and address 3
--
[13513.988222] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[13513.988263] ata1.00: cmd ca/00:08:07:93:47/00:00:00:00:00/e0 tag 0 dma 4096 out
[13513.988270] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4
(timeout)
[13513.988285] ata1.00: status: { DRDY }
[13519.028142] ata1: link is slow to respond, please be patient (ready=0)
[13524.012128] ata1: device not ready (errno=-16), forcing hardreset
[13524.012153] ata1: soft resetting link
[13524.192688] ata1.00: configured for UDMA/100
[13524.192710] ata1.00: device reported invalid CHS sector 0
[13524.192743] ata1: EH complete
[13881.114281] wlan2: deauthenticated from 00:1f:1f:52:d6:b4 (Reason: 7)
--
[15405.912548] ata_piix 0000:00:1f.2: PCI INT B disabled
[15405.928318] ehci_hcd 0000:00:1d.7: PCI INT A disabled
--
[15406.626088] ata_piix 0000:00:1f.2: restoring config space at offset 0xf
(was 0x200, writing 0x2ff)
[15406.626215] ath9k 0000:02:00.0: restoring config space at offset 0xf (was
0x1ff, writing 0x10b)
--
[15406.723533] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[15406.723542] ata_piix 0000:00:1f.2: setting latency timer to 64
[15406.723587] ath9k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
--
[15407.900411] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
[15407.900419] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
[15407.912454] ata1.00: configured for UDMA/100
[15408.044037] usb 1-8: reset high speed USB device using ehci_hcd and address 3
--
[15696.000177] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[15696.005305] ata1.00: cmd c8/00:08:7f:a9:11/00:00:00:00:00/e0 tag 0 dma 4096 in
[15696.005313] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4
(timeout)
[15696.016463] ata1.00: status: { DRDY }
[15696.412148] ata1: soft resetting link
[15696.592651] ata1.00: configured for UDMA/100
[15696.592674] ata1.00: device reported invalid CHS sector 0
[15696.592708] ata1: EH complete
[15870.282772] wlan2: deauthenticated from 00:1f:1f:52:d6:b4 (Reason: 7)
--
[16719.572551] ata_piix 0000:00:1f.2: PCI INT B disabled
[16719.588308] ehci_hcd 0000:00:1d.7: PCI INT A disabled
--
[16720.286085] ata_piix 0000:00:1f.2: restoring config space at offset 0xf
(was 0x200, writing 0x2ff)
[16720.286213] ath9k 0000:02:00.0: restoring config space at offset 0xf (was
0x1ff, writing 0x10b)
--
[16720.383723] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[16720.383731] ata_piix 0000:00:1f.2: setting latency timer to 64
[16720.383774] ath9k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
--
[16721.560412] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
[16721.560420] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
[16721.572444] ata1.00: configured for UDMA/100
[16721.832036] usb 1-8: reset high speed USB device using ehci_hcd and address 3
--
[16996.988325] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[16996.994787] ata1.00: cmd ca/00:08:cf:71:05/00:00:00:00:00/e9 tag 0 dma 4096 out
[16996.994798] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4
(timeout)
[16997.009313] ata1.00: status: { DRDY }
[17002.056161] ata1: link is slow to respond, please be patient (ready=0)
[17007.040288] ata1: device not ready (errno=-16), forcing hardreset
[17007.040313] ata1: soft resetting link
[17007.220787] ata1.00: configured for UDMA/100
[17007.220809] ata1.00: device reported invalid CHS sector 0
[17007.220842] ata1: EH complete
[17430.764604] CPU0 attaching NULL sched-domain.
--
[17433.308547] ata_piix 0000:00:1f.2: PCI INT B disabled
[17433.324312] ehci_hcd 0000:00:1d.7: PCI INT A disabled
--
[17434.018090] ata_piix 0000:00:1f.2: restoring config space at offset 0xf
(was 0x200, writing 0x2ff)
[17434.018217] ath9k 0000:02:00.0: restoring config space at offset 0xf (was
0x1ff, writing 0x10b)
--
[17434.115146] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[17434.115155] ata_piix 0000:00:1f.2: setting latency timer to 64
[17434.115199] ath9k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
--
[17435.348411] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
[17435.348419] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
[17435.472448] ata1.00: configured for UDMA/100
[17435.608036] usb 1-8: reset high speed USB device using ehci_hcd and address 3
--
[17711.988348] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[17711.988390] ata1.00: cmd ca/00:08:a7:2c:00/00:00:00:00:00/e0 tag 0 dma 4096 out
[17711.988397] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4
(timeout)
[17711.988411] ata1.00: status: { DRDY }
[17717.028259] ata1: link is slow to respond, please be patient (ready=0)
[17722.016309] ata1: device not ready (errno=-16), forcing hardreset
[17722.016334] ata1: soft resetting link
[17722.196824] ata1.00: configured for UDMA/100
[17722.196846] ata1.00: device reported invalid CHS sector 0
[17722.196880] ata1: EH complete
[19580.466508] CPU0 attaching NULL sched-domain.
--
[19582.924596] ata_piix 0000:00:1f.2: PCI INT B disabled
[19582.940315] ehci_hcd 0000:00:1d.7: PCI INT A disabled
--
[19583.690087] ata_piix 0000:00:1f.2: restoring config space at offset 0xf
(was 0x200, writing 0x2ff)
[19583.690211] ath9k 0000:02:00.0: restoring config space at offset 0xf (was
0x1ff, writing 0x10b)
--
[19583.787602] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[19583.787611] ata_piix 0000:00:1f.2: setting latency timer to 64
[19583.787655] ath9k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
--
[19585.020411] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
[19585.020419] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
[19585.144449] ata1.00: configured for UDMA/100
[19585.276036] usb 1-8: reset high speed USB device using ehci_hcd and address 3
--
[19857.989316] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[19857.989357] ata1.00: cmd ca/00:08:f7:32:73/00:00:00:00:00/e0 tag 0 dma 4096 out
[19857.989364] res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4
(timeout)
[19857.989378] ata1.00: status: { DRDY }
[19863.037122] ata1: link is slow to respond, please be patient (ready=0)
[19868.037107] ata1: device not ready (errno=-16), forcing hardreset
[19868.037138] ata1: soft resetting link
[19868.217826] ata1.00: configured for UDMA/100
[19868.217849] ata1.00: device reported invalid CHS sector 0
[19868.217884] ata1: EH complete
[19977.239338] wlan2: deauthenticated from 00:1f:1f:52:d6:b4 (Reason: 7)
What smart says:
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: FUJITSU MHZ2160BH G2
Serial Number: K62TT982MYCW
Firmware Version: 008B000B
User Capacity: 160,041,885,696 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 3f
Local Time is: Mon Oct 19 11:12:26 2009 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 649) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 92) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 046 Pre-fail Always
- 43102
2 Throughput_Performance 0x0005 100 100 030 Pre-fail Offline
- 27721728
3 Spin_Up_Time 0x0003 100 100 025 Pre-fail Always
- 1
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always
- 132
5 Reallocated_Sector_Ct 0x0033 100 100 024 Pre-fail Always
- 8589934592000
7 Seek_Error_Rate 0x000f 100 100 047 Pre-fail Always
- 552
8 Seek_Time_Performance 0x0005 100 100 019 Pre-fail Offline
- 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always
- 57
10 Spin_Retry_Count 0x0013 100 100 020 Pre-fail Always
- 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 60
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always
- 8
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always
- 1191
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always
- 28 (Lifetime Min/Max 18/48)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always
- 18
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always
- 440729600
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline
- 0
199 UDMA_CRC_Error_Count 0x003e 200 253 000 Old_age Always
- 20
200 Multi_Zone_Error_Rate 0x000f 100 100 060 Pre-fail Always
- 24862
203 Run_Out_Cancel 0x0002 100 100 000 Old_age Always
- 1529028411460
240 Head_Flying_Hours 0x003e 200 200 000 Old_age Always
- 0
SMART Error Log Version: 1
ATA Error Count: 20 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 20 occurred at disk power-on lifetime: 55 hours (2 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 05 82 a9 11 e0 Error: ICRC, ABRT 5 sectors at LBA = 0x0011a982 = 1157506
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 7f a9 11 e0 08 00:04:19.791 READ DMA
ef 10 03 9e 3e 05 a0 08 00:04:11.675 SET FEATURES [Reserved for
Serial ATA]
ea 00 00 9e 3e 05 a0 08 00:04:08.477 FLUSH CACHE EXIT
ca 00 08 97 3e 05 e9 08 00:04:08.476 WRITE DMA
ea 00 00 96 3e 05 a0 08 00:04:08.370 FLUSH CACHE EXIT
Error 19 occurred at disk power-on lifetime: 51 hours (2 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 1d 42 d0 2c e0 Error: ICRC, ABRT 29 sectors at LBA = 0x002cd042 =
2936898
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 20 3f d0 2c e0 08 00:17:38.198 READ DMA
ef 10 03 e6 22 04 a0 08 00:17:33.495 SET FEATURES [Reserved for
Serial ATA]
ea 00 00 e6 22 04 a0 08 00:17:31.033 FLUSH CACHE EXIT
ca 00 08 df 22 04 e9 08 00:17:31.032 WRITE DMA
ea 00 00 de 22 04 a0 08 00:17:30.907 FLUSH CACHE EXIT
Error 18 occurred at disk power-on lifetime: 46 hours (1 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 05 7a 54 23 e0 Error: ICRC, ABRT 5 sectors at LBA = 0x0023547a = 2315386
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 77 54 23 e0 08 00:23:38.596 READ DMA
ef 10 03 ce 15 04 a0 08 00:23:21.392 SET FEATURES [Reserved for
Serial ATA]
ea 00 00 ce 15 04 a0 08 00:23:19.057 FLUSH CACHE EXIT
ca 00 08 c7 15 04 e9 08 00:23:19.057 WRITE DMA
ea 00 00 c6 15 04 a0 08 00:23:18.931 FLUSH CACHE EXIT
Error 17 occurred at disk power-on lifetime: 35 hours (1 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 75 6a 7f 32 e0 Error: ICRC, ABRT 117 sectors at LBA = 0x00327f6a =
3309418
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 78 67 7f 32 e0 08 00:11:59.470 READ DMA
ef 10 03 5e 65 32 a0 08 00:11:58.476 SET FEATURES [Reserved for
Serial ATA]
c8 00 08 57 65 32 e0 08 00:11:57.847 READ DMA
c8 00 08 6f 65 32 e0 08 00:11:56.337 READ DMA
c8 00 20 3f 81 09 e0 08 00:11:56.076 READ DMA
Error 16 occurred at disk power-on lifetime: 34 hours (1 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 bd 42 eb 15 e0 Error: ICRC, ABRT 189 sectors at LBA = 0x0015eb42 =
1436482
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 c0 3f eb 15 e0 08 00:45:20.835 READ DMA
ef 10 03 3e 91 20 a0 08 00:45:20.545 SET FEATURES [Reserved for
Serial ATA]
c8 00 08 37 91 20 e0 08 00:45:19.443 READ DMA
c8 00 10 f7 4a 42 e2 08 00:45:19.381 READ DMA
c8 00 08 cf a8 11 e0 08 00:45:19.351 READ DMA
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
lspci:
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE
Controller (rev 02) (prog-if 80 [Master])
Subsystem: Samsung Electronics Co Ltd Device c062
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1810 [size=16]
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ata_piix
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller
Hub (rev 03)
Subsystem: Samsung Electronics Co Ltd Device c062
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information <?>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express
Integrated Graphics Controller (rev 03)
Subsystem: Samsung Electronics Co Ltd Device c062
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 1800 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at f0200000 (32-bit, non-prefetchable) [size=256K]
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: i915
Kernel modules: i915
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML
Express Integrated Graphics Controller (rev 03)
Subsystem: Samsung Electronics Co Ltd Device c062
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f0080000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition
Audio Controller (rev 02)
Subsystem: Samsung Electronics Co Ltd Device c062
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f0440000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1
<1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt-
ABWMgmt-
Capabilities: [100] Virtual Channel <?>
Capabilities: [130] Root Complex Link <?>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1
(rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: f0100000-f01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1
<4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt-
ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 2, PowerLimit 6.500000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee0100c Data: 4159
Capabilities: [90] Subsystem: Samsung Electronics Co Ltd Device c062
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3
(rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 80000000-800fffff
Prefetchable memory behind bridge: 00000000f0500000-00000000f05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1
<4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt-
ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 4, PowerLimit 6.500000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee0100c Data: 4161
Capabilities: [90] Subsystem: Samsung Electronics Co Ltd Device c062
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #1 (rev 02)
Subsystem: Samsung Electronics Co Ltd Device c062
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #2 (rev 02)
Subsystem: Samsung Electronics Co Ltd Device c062
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #3 (rev 02)
Subsystem: Samsung Electronics Co Ltd Device c062
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 20
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #4 (rev 02)
Subsystem: Samsung Electronics Co Ltd Device c062
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at 1880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller (rev 02) (prog-if 20)
Subsystem: Samsung Electronics Co Ltd Device c062
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f0444000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
(prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Samsung Electronics Co Ltd Device c062
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge
(rev 02)
Subsystem: Samsung Electronics Co Ltd Device c062
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information <?>
Kernel modules: iTCO_wdt, intel-rng
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
Subsystem: Samsung Electronics Co Ltd Device c062
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 5
Region 4: I/O ports at 18a0 [size=32]
Kernel modules: i2c-i801
02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless
Network Adapter (PCI-Express) (rev 01)
Subsystem: Askey Computer Corp. Device 7167
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0100000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [60] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1
<64us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt-
ABWMgmt-
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [140] Virtual Channel <?>
Capabilities: [160] Device Serial Number 12-14-24-ff-ff-17-15-00
Capabilities: [170] Power Budgeting <?>
Kernel driver in use: ath9k
Kernel modules: ath9k
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E
PCI Express Fast Ethernet controller (rev 02)
Subsystem: Samsung Electronics Co Ltd Device c062
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
Region 0: I/O ports at 2000 [size=256]
Region 2: Memory at f0510000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at f0500000 (64-bit, prefetchable) [size=64K]
[virtual] Expansion ROM at f0520000 [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
Address: 00000000fee0100c Data: 4189
Capabilities: [70] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1
<64us
ClockPM+ Suprise- LLActRep- BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt-
ABWMgmt-
Capabilities: [ac] MSI-X: Enable- Mask- TabSize=2
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [cc] Vital Product Data <?>
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [140] Virtual Channel <?>
Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-01
Kernel driver in use: r8169
Kernel modules: r8169
next reply other threads:[~2009-10-19 10:12 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-19 10:12 Jan Christoph Uhde [this message]
2009-10-20 0:39 ` disk with ata_piix freezes Robert Hancock
-- strict thread matches above, loose matches on Subject: below --
2009-10-19 12:30 Jan Christoph Uhde
2009-10-20 1:50 ` Tejun Heo
2009-10-20 8:19 ` Jan Christoph Uhde
2009-10-20 9:50 ` Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4ADC3B7C.2070207@gmx.net \
--to=uhdejc@gmx.net \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.