From mboxrd@z Thu Jan 1 00:00:00 1970 From: Adam Nielsen Date: Mon, 19 Oct 2009 23:59:44 +0000 Subject: Re: [lm-sensors] Gigabyte GA-P35-DS3P - VID Zero value Message-Id: <4ADCFD70.6070106@shikadi.net> List-Id: References: <20091019164516.701032uxlen5ai2k@mail.simonandkate.net> In-Reply-To: <20091019164516.701032uxlen5ai2k@mail.simonandkate.net> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org > Setting /sys/class/hwmon/hwmon0/device/vrm to 100 instead of 110 "fixes" > this issue. Or I should say, it means I get a value - 1.088 V - at VID. > Whether it is right or not... ? I suspect it is wrong - I was looking at this issue this morning and the Core2 CPUs are correctly listed in the hwmon-vid driver and I too get a vrm value of 110 which is correct for my CPU. Setting a different vrm value causes a different formula to be used when calculating the voltage. I was wondering whether the VID lines aren't actually connected to the it87 chip, but it looks like they are, just not all of them. It looks like (if that's correct) the only option is to hack hwmon-vid to use less VID pins or something to get the correct value out. Cheers, Adam. _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors