From: Tomasz Chmielewski <mangoo@wpkg.org>
To: "Gábor Stefanik" <netrolller.3d@gmail.com>
Cc: linux-wireless@vger.kernel.org, linux-net@vger.kernel.org,
linux-mips@vger.kernel.org, Bob Copeland <me@bobcopeland.com>
Subject: Re: ath5k AP kernel panic when client uses SCP
Date: Sat, 24 Oct 2009 13:59:58 +0200 [thread overview]
Message-ID: <4AE2EC3E.3000503@wpkg.org> (raw)
In-Reply-To: <4AE1AE74.4020600@wpkg.org>
Tomasz Chmielewski wrote:
> Gábor Stefanik wrote:
>> On Fri, Oct 23, 2009 at 3:15 PM, Tomasz Chmielewski <mangoo@wpkg.org>
>> wrote:
>>> Bob Copeland wrote:
>>>> CONFIG_DEBUG_INFO is the basic switch. I don't know if MIPS needs
>>>> CONFIG_FRAME_POINTER but that could help too.
>>> I don't see CONFIG_FRAME_POINTER available.
>>> I compiled with CONFIG_DEBUG_INFO; let me know if I should enable
>>> some other
>>> DEBUG options as well (see below what's enabled and available).
>>>
>>> Before it oopses, I see lots of order 0 page allocation failures
>>> (there are
>>> some extra spaces at the end of each line due to the broken konsole in
>>> KDE4):
>>>
>>> http://www1.wpkg.org/oops2.txt
>
>> Is CONFIG_KALLSYMS set?
>
> Good clue:
>
> # zgrep KALL /proc/config.gz
> # CONFIG_KALLSYMS is not set
>
> I'll recompile...
Is this one more useful?
[ 516.430000] ------------[ cut here ]------------
[ 516.430000] WARNING: at net/core/dev.c:1566 skb_gso_segment+0x110/0x298()
[ 516.440000] b44: caps=(0x0, 0x0) len=52 data_len=0 ip_summed=1
[ 516.450000] Modules linked in: configs aes_generic tun sch_sfq cls_fw sch_htb ipt_MASQUERADE iptable_nat nf_nat xt_MARK iptable_mangle ipt_ULOG xt_recent nf_conn1
[ 516.480000] Call Trace:
[ 516.480000] [<80013ac4>] dump_stack+0x8/0x34
[ 516.480000] [<8002f2a0>] warn_slowpath_common+0x70/0x98
[ 516.490000] [<8002f308>] warn_slowpath_fmt+0x24/0x30
[ 516.490000] [<801f0398>] skb_gso_segment+0x110/0x298
[ 516.500000] [<801f0728>] dev_hard_start_xmit+0x208/0x364
[ 516.500000] [<80207c5c>] __qdisc_run+0x108/0x2f0
[ 516.510000] [<801f4ad8>] dev_queue_xmit+0x25c/0x3a8
[ 516.510000] [<802785c8>] br_dev_queue_push_xmit+0x98/0xac
[ 516.520000] [<8027e66c>] br_nf_post_routing+0x23c/0x25c
[ 516.520000] [<80214e78>] nf_iterate+0x70/0xf8
[ 516.530000] [<80214fc8>] nf_hook_slow+0x88/0x12c
[ 516.530000] [<80278630>] br_forward_finish+0x54/0x80
[ 516.540000] [<8027dac0>] br_nf_forward_finish+0x114/0x130
[ 516.540000] [<8027eba0>] br_nf_forward_ip+0x300/0x33c
[ 516.550000] [<80214e78>] nf_iterate+0x70/0xf8
[ 516.550000] [<80214fc8>] nf_hook_slow+0x88/0x12c
[ 516.560000] [<802786e8>] __br_forward+0x8c/0xe0
[ 516.560000] [<802796d4>] br_handle_frame_finish+0x168/0x1ac
[ 516.570000] [<8027e260>] br_nf_pre_routing_finish+0x40c/0x450
[ 516.580000] [<8027f564>] br_nf_pre_routing+0x824/0x86c
[ 516.580000] [<80214e78>] nf_iterate+0x70/0xf8
[ 516.580000] [<80214fc8>] nf_hook_slow+0x88/0x12c
[ 516.590000] [<80279938>] br_handle_frame+0x220/0x26c
[ 516.590000] [<801ef944>] netif_receive_skb+0x604/0x7b8
[ 516.600000] [<801f23f0>] process_backlog+0xc8/0x138
[ 516.600000] [<801f365c>] net_rx_action+0xe8/0x26c
[ 516.610000] [<80035a84>] __do_softirq+0xac/0x160
[ 516.610000] [<80035b94>] do_softirq+0x5c/0x94
[ 516.620000] [<80036094>] irq_exit+0x40/0x8c
[ 516.620000] [<80001844>] ret_from_irq+0x0/0x4
[ 516.630000] [<800ab12c>] core_sys_select+0x1d0/0x2d0
[ 516.630000] [<800ab870>] sys_select+0xe4/0x12c
[ 516.640000] [<800035f0>] stack_done+0x20/0x3c
[ 516.640000]
[ 516.640000] ---[ end trace b84c10674d0cf224 ]---
[ 516.650000] Unhandled kernel unaligned access[#1]:
[ 516.650000] Cpu 0
[ 516.650000] $ 0 : 00000000 1000dc00 00000001 81f97a40
[ 516.650000] $ 4 : e0f2fdea 00000000 00000001 00000083
[ 516.650000] $ 8 : 00000000 00000083 80380000 ffffffea
[ 516.650000] $12 : 80380000 00000030 00000020 00000000
[ 516.650000] $16 : 0000000c 00000001 80dfa8e0 81c67000
[ 516.650000] $20 : 81ccda00 8029ac50 80278530 81c67000
[ 516.650000] $24 : 00000204 8023e8ec
[ 516.650000] $28 : 81c14000 81c15750 00000005 801e6398
[ 516.650000] Hi : 00000000
[ 516.650000] Lo : 00000000
[ 516.650000] epc : 80073710 put_page+0x0/0x314
[ 516.650000] Tainted: G W
[ 516.650000] ra : 801e6398 skb_release_data+0xf4/0x160
[ 516.650000] Status: 1000dc03 KERNEL EXL IE
[ 516.650000] Cause : 00800010
[ 516.650000] BadVA : e0f2fdea
[ 516.650000] PrId : 00029006 (Broadcom BCM3302)
[ 516.650000] Modules linked in: configs aes_generic tun sch_sfq cls_fw sch_htb ipt_MASQUERADE iptable_nat nf_nat xt_MARK iptable_mangle ipt_ULOG xt_recent nf_conn1
[ 516.650000] Process init (pid: 1, threadinfo=81c14000, task=81c13938, tls=2aada4c0)
[ 516.650000] Stack : 80dfa8e0 801e5c98 00000000 00000000 80dfa8e0 8038b698 80dfa8e0 801e5cf8
[ 516.650000] 81ccda00 8038b698 80dfa8e0 81c67000 81ccda00 801f0858 80dfa8e0 81a40680
[ 516.650000] 81c157d0 81dc6800 81dc6800 81ccda00 81ccda00 00000001 81dc6800 80dfa8e0
[ 516.650000] 81c67000 0000548b 80207c5c 80207bf4 81dc6800 00000002 00000000 8027d934
[ 516.650000] 81dc6800 81ccda00 80dfa8e0 00000000 8038bcd0 80000000 801f4ad8 801f4a34
[ 516.650000] ...
[ 516.650000] Call Trace:
[ 516.650000] [<80073710>] put_page+0x0/0x314
[ 516.650000] [<801e6398>] skb_release_data+0xf4/0x160
[ 516.650000] [<801e5cf8>] __kfree_skb+0x14/0x1c0
[ 516.650000] [<801f0858>] dev_hard_start_xmit+0x338/0x364
[ 516.650000] [<80207c5c>] __qdisc_run+0x108/0x2f0
[ 516.650000] [<801f4ad8>] dev_queue_xmit+0x25c/0x3a8
[ 516.650000] [<802785c8>] br_dev_queue_push_xmit+0x98/0xac
[ 516.650000] [<8027e66c>] br_nf_post_routing+0x23c/0x25c
[ 516.650000] [<80214e78>] nf_iterate+0x70/0xf8
[ 516.650000] [<80214fc8>] nf_hook_slow+0x88/0x12c
[ 516.650000] [<80278630>] br_forward_finish+0x54/0x80
[ 516.650000] [<8027dac0>] br_nf_forward_finish+0x114/0x130
[ 516.650000] [<8027eba0>] br_nf_forward_ip+0x300/0x33c
[ 516.650000] [<80214e78>] nf_iterate+0x70/0xf8
[ 516.650000] [<80214fc8>] nf_hook_slow+0x88/0x12c
[ 516.650000] [<802786e8>] __br_forward+0x8c/0xe0
[ 516.650000] [<802796d4>] br_handle_frame_finish+0x168/0x1ac
[ 516.650000] [<8027e260>] br_nf_pre_routing_finish+0x40c/0x450
[ 516.650000] [<8027f564>] br_nf_pre_routing+0x824/0x86c
[ 516.650000] [<80214e78>] nf_iterate+0x70/0xf8
[ 516.650000] [<80214fc8>] nf_hook_slow+0x88/0x12c
[ 516.650000] [<80279938>] br_handle_frame+0x220/0x26c
[ 516.650000] [<801ef944>] netif_receive_skb+0x604/0x7b8
[ 516.650000] [<801f23f0>] process_backlog+0xc8/0x138
[ 516.650000] [<801f365c>] net_rx_action+0xe8/0x26c
[ 516.650000] [<80035a84>] __do_softirq+0xac/0x160
[ 516.650000] [<80035b94>] do_softirq+0x5c/0x94
[ 516.650000] [<80036094>] irq_exit+0x40/0x8c
[ 516.650000] [<80001844>] ret_from_irq+0x0/0x4
[ 516.650000] [<800ab12c>] core_sys_select+0x1d0/0x2d0
[ 516.650000] [<800ab870>] sys_select+0xe4/0x12c
[ 516.650000] [<800035f0>] stack_done+0x20/0x3c
[ 516.650000]
[ 516.650000]
[ 516.650000] Code: 3c048007 08010d50 248436fc <8c820000> 3042c000 10400003 00803821 0801ca7f 00000000
[ 516.650000] Disabling lock debugging due to kernel taint
[ 516.990000] Kernel panic - not syncing: Fatal exception in interrupt
As this line didn't fit:
Modules linked in: tun sch_sfq cls_fw sch_htb ipt_MASQUERADE iptable_nat nf_nat xt_MARK iptable_mangle ipt_ULOG xt_recent nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack xt_tcpudp iptable_filter ip_tables x_tables ath5k mac80211 ath ohci_hcd cfg80211 uhci_hcd
--
Tomasz Chmielewski
http://wpkg.org
next prev parent reply other threads:[~2009-10-24 12:00 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-11 17:49 ath5k AP kernel panic when client uses SCP Tomasz Chmielewski
2009-10-11 17:55 ` Tomasz Chmielewski
2009-10-11 22:47 ` Bob Copeland
2009-10-12 8:13 ` Tomasz Chmielewski
2009-10-12 8:13 ` Tomasz Chmielewski
2009-10-23 13:15 ` Tomasz Chmielewski
2009-10-23 13:21 ` Gábor Stefanik
2009-10-23 13:24 ` Tomasz Chmielewski
2009-10-24 11:59 ` Tomasz Chmielewski [this message]
2009-10-24 12:52 ` Bob Copeland
2009-10-24 15:27 ` Tomasz Chmielewski
2009-10-24 16:09 ` Bob Copeland
2009-10-24 18:10 ` Tomasz Chmielewski
2009-10-25 20:19 ` Bob Copeland
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4AE2EC3E.3000503@wpkg.org \
--to=mangoo@wpkg.org \
--cc=linux-mips@vger.kernel.org \
--cc=linux-net@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=me@bobcopeland.com \
--cc=netrolller.3d@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.