From: Tom <Tom.Rix@windriver.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] ARM pull request v4
Date: Sat, 24 Oct 2009 13:28:01 -0500 [thread overview]
Message-ID: <4AE34731.5000102@windriver.com> (raw)
Wolfgang,
Please pull from u-boot-arm, master-sync branch.
The change from the v3 is to put Steve's network patch back
and to remove Nishanth's memory patch.
Tom
Here is the diff from v3 to v4 :
21c21
< Nishanth Menon (4):
---
> Nishanth Menon (3):
24d23
< OMAP3: Fix SDRC init
45c44
< Steve Sakoman (1):
---
> Steve Sakoman (2):
46a46
> ARM: OMAP3: Refactors the SM911x driver
103c103
< cpu/arm_cortexa8/omap3/mem.c | 21 +-
---
> cpu/arm_cortexa8/omap3/mem.c | 18 +-
115a116
> drivers/net/smc911x.c | 12 +-
121,122d121
< include/asm-arm/arch-omap3/cpu.h | 1 +
< include/asm-arm/arch-omap3/mem.h | 8 +-
159c158
< 100 files changed, 6323 insertions(+), 2459 deletions(-)
---
> 99 files changed, 6322 insertions(+), 2460 deletions(-)
----
The request :
The following changes since commit a380279b2abe130c2d3d2c8de36f8ff98bc6b3b0:
Daniel Gorsulowski (1):
at91: Update MEESC board support
are available in the git repository at:
git://git.denx.de/u-boot-arm master-sync
Eric Benard (3):
AT91 CPU9260 Fix machine ID when using a CPU9G20.
AT91 CPU9260 CPU9G20 Fix compile warnings
AT91 CPUAT91 Fix compiler warning
Minkyu Kang (5):
s5pc1xx: support Samsung s5pc1xx SoC
s5pc1xx: support onenand driver
s5pc1xx: support serial driver
s5pc1xx: add support SMDKC100 board
s5pc1xx: SMDKC100: fix compile warnings
Nishanth Menon (3):
OMAP3: export enable_gpmc_cs_config to board files
OMAP3: fix warnings when NAND/ONENAND is not used
TI OMAP3: make gpmc_config as const
Sandeep Paulraj (13):
TI DaVinci DM355: Fix Compilation warning for DM355 EVM
TI DaVinci DM365: Fix Compilation warning for DM365 EVM
TI DaVinci DM646x: Adding initial support for DM6467 EVM
TI: DaVinci: DM355 Leopard board support
TI DaVinci: Maintainer for DM355 and DM365 EVM
TI: OMAP3: Remove SZ_xx references
TI DaVinci DM355: Add Config option for 64 bit Support
TI DaVinci DM365: Add Config option for 64 bit Support
TI DaVinci DVEVM: Add Config option for 64 bit Support
TI DaVinci Sonata: Add Config option for 64 bit Support
TI DaVinci: DM355 Leopard: Fix compilation warning
TI DaVinci: Fix DM6467 EVM Compilation Warning
TI DaVinci: Adding Copyright for DM365 EVM
Simon Kagstrom (1):
arm926ejs: 8-byte align stack to avoid LDRD/STRD problems
Steve Sakoman (2):
OMAP3: Update Overo and Beagle environment
ARM: OMAP3: Refactors the SM911x driver
Tom Rix (2):
Zoom2 Fix serial gpmc setup
TI OMAP3 SDP3430: Initial Support
kevin.morfitt at fearnside-systems.co.uk (5):
CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards
Clean-up of cpu_arm920t and cpu_arm920t_s3c24x0 code
Clean-up of s3c24x0 header files
Clean-up of s3c24x0 drivers excluding nand driver
Clean-up of s3c24x0 nand driver
MAINTAINERS | 12 +
MAKEALL | 4 +
Makefile | 12 +
board/davinci/dm355evm/dm355evm.c | 4 +-
board/davinci/dm355leopard/Makefile | 52 ++
board/davinci/dm355leopard/config.mk | 6 +
board/davinci/dm355leopard/dm355leopard.c | 98 +++
board/davinci/dm365evm/dm365evm.c | 5 +-
board/davinci/dm6467evm/Makefile | 52 ++
board/davinci/dm6467evm/config.mk | 2 +
board/davinci/dm6467evm/dm6467evm.c | 31 +
board/eukrea/cpu9260/cpu9260.c | 2 +-
board/logicpd/zoom2/zoom2.c | 5 +-
board/mpl/vcma9/vcma9.c | 13 +-
board/mpl/vcma9/vcma9.h | 20 +-
board/samsung/smdk2400/smdk2400.c | 5 +-
board/samsung/smdk2410/smdk2410.c | 5 +-
board/samsung/smdkc100/Makefile | 55 ++
board/samsung/smdkc100/config.mk | 16 +
board/samsung/smdkc100/lowlevel_init.S | 215 +++++
board/samsung/smdkc100/mem_setup.S | 197 +++++
board/samsung/smdkc100/onenand.c | 83 ++
board/samsung/smdkc100/smdkc100.c | 51 ++
board/sbc2410x/sbc2410x.c | 7 +-
board/ti/sdp3430/Makefile | 49 ++
board/ti/sdp3430/config.mk | 33 +
board/ti/sdp3430/sdp.c | 204 +++++
board/ti/sdp3430/sdp.h | 417 +++++++++
board/trab/cmd_trab.c | 12 +-
board/trab/rs485.c | 12 +-
board/trab/trab.c | 17 +-
board/trab/trab_fkt.c | 26 +-
board/trab/tsc2000.c | 17 +-
board/trab/tsc2000.h | 4 +-
board/trab/vfd.c | 12 +-
common/serial.c | 18 +
cpu/arm920t/s3c24x0/interrupts.c | 4 +-
cpu/arm920t/s3c24x0/speed.c | 42 +-
cpu/arm920t/s3c24x0/timer.c | 110 ++--
cpu/arm920t/s3c24x0/usb.c | 30 +-
cpu/arm920t/s3c24x0/usb_ohci.c | 1323
+++++++++++++++--------------
cpu/arm920t/s3c24x0/usb_ohci.h | 209 +++---
cpu/arm920t/start.S | 63 +-
cpu/arm926ejs/start.S | 1 +
cpu/arm_cortexa8/omap3/mem.c | 18 +-
cpu/arm_cortexa8/omap3/sys_info.c | 2 +-
cpu/arm_cortexa8/s5pc1xx/Makefile | 53 ++
cpu/arm_cortexa8/s5pc1xx/cache.c | 43 +
cpu/arm_cortexa8/s5pc1xx/clock.c | 308 +++++++
cpu/arm_cortexa8/s5pc1xx/cpu_info.c | 57 ++
cpu/arm_cortexa8/s5pc1xx/reset.S | 47 +
cpu/arm_cortexa8/s5pc1xx/timer.c | 195 +++++
doc/README.s5pc1xx | 56 ++
drivers/i2c/s3c24x0_i2c.c | 273 +++---
drivers/mtd/nand/s3c2410_nand.c | 62 +-
drivers/mtd/onenand/Makefile | 1 +
drivers/mtd/onenand/samsung.c | 636 ++++++++++++++
drivers/net/smc911x.c | 12 +-
drivers/rtc/s3c24x0_rtc.c | 130 ++--
drivers/serial/Makefile | 1 +
drivers/serial/serial_s3c24x0.c | 160 ++--
drivers/serial/serial_s5pc1xx.c | 195 +++++
include/asm-arm/arch-davinci/hardware.h | 2 +
include/asm-arm/arch-omap3/sys_proto.h | 2 +
include/asm-arm/arch-s5pc1xx/clk.h | 32 +
include/asm-arm/arch-s5pc1xx/clock.h | 94 ++
include/asm-arm/arch-s5pc1xx/cpu.h | 72 ++
include/asm-arm/arch-s5pc1xx/gpio.h | 129 +++
include/asm-arm/arch-s5pc1xx/power.h | 42 +
include/asm-arm/arch-s5pc1xx/pwm.h | 59 ++
include/asm-arm/arch-s5pc1xx/uart.h | 47 +
include/configs/cpu9260.h | 1 +
include/configs/cpuat91.h | 4 +-
include/configs/davinci_dm355evm.h | 1 +
include/configs/davinci_dm355leopard.h | 162 ++++
include/configs/davinci_dm365evm.h | 2 +
include/configs/davinci_dm6467evm.h | 132 +++
include/configs/davinci_dvevm.h | 1 +
include/configs/davinci_sonata.h | 1 +
include/configs/devkit8000.h | 15 +-
include/configs/omap3_beagle.h | 42 +-
include/configs/omap3_evm.h | 15 +-
include/configs/omap3_overo.h | 42 +-
include/configs/omap3_pandora.h | 15 +-
include/configs/omap3_sdp3430.h | 369 ++++++++
include/configs/omap3_zoom1.h | 15 +-
include/configs/omap3_zoom2.h | 15 +-
include/configs/sbc2410x.h | 4 +-
include/configs/smdk2400.h | 4 +-
include/configs/smdk2410.h | 4 +-
include/configs/smdkc100.h | 242 ++++++
include/configs/trab.h | 12 +-
include/linux/mtd/onenand.h | 1 +
include/linux/mtd/onenand_regs.h | 4 +
include/linux/mtd/samsung_onenand.h | 131 +++
include/s3c2400.h | 494 +----------
include/s3c2410.h | 159 +---
include/s3c24x0.h | 605 ++------------
include/serial.h | 7 +
99 files changed, 6322 insertions(+), 2460 deletions(-)
create mode 100644 board/davinci/dm355leopard/Makefile
create mode 100644 board/davinci/dm355leopard/config.mk
create mode 100644 board/davinci/dm355leopard/dm355leopard.c
create mode 100644 board/davinci/dm6467evm/Makefile
create mode 100644 board/davinci/dm6467evm/config.mk
create mode 100644 board/davinci/dm6467evm/dm6467evm.c
create mode 100644 board/samsung/smdkc100/Makefile
create mode 100644 board/samsung/smdkc100/config.mk
create mode 100644 board/samsung/smdkc100/lowlevel_init.S
create mode 100644 board/samsung/smdkc100/mem_setup.S
create mode 100644 board/samsung/smdkc100/onenand.c
create mode 100644 board/samsung/smdkc100/smdkc100.c
create mode 100644 board/ti/sdp3430/Makefile
create mode 100644 board/ti/sdp3430/config.mk
create mode 100644 board/ti/sdp3430/sdp.c
create mode 100644 board/ti/sdp3430/sdp.h
create mode 100644 cpu/arm_cortexa8/s5pc1xx/Makefile
create mode 100644 cpu/arm_cortexa8/s5pc1xx/cache.c
create mode 100644 cpu/arm_cortexa8/s5pc1xx/clock.c
create mode 100644 cpu/arm_cortexa8/s5pc1xx/cpu_info.c
create mode 100644 cpu/arm_cortexa8/s5pc1xx/reset.S
create mode 100644 cpu/arm_cortexa8/s5pc1xx/timer.c
create mode 100644 doc/README.s5pc1xx
create mode 100644 drivers/mtd/onenand/samsung.c
create mode 100644 drivers/serial/serial_s5pc1xx.c
create mode 100644 include/asm-arm/arch-s5pc1xx/clk.h
create mode 100644 include/asm-arm/arch-s5pc1xx/clock.h
create mode 100644 include/asm-arm/arch-s5pc1xx/cpu.h
create mode 100644 include/asm-arm/arch-s5pc1xx/gpio.h
create mode 100644 include/asm-arm/arch-s5pc1xx/power.h
create mode 100644 include/asm-arm/arch-s5pc1xx/pwm.h
create mode 100644 include/asm-arm/arch-s5pc1xx/uart.h
create mode 100644 include/configs/davinci_dm355leopard.h
create mode 100644 include/configs/davinci_dm6467evm.h
create mode 100644 include/configs/omap3_sdp3430.h
create mode 100644 include/configs/smdkc100.h
create mode 100644 include/linux/mtd/samsung_onenand.h
next reply other threads:[~2009-10-24 18:28 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-24 18:28 Tom [this message]
2009-10-24 20:44 ` [U-Boot] ARM pull request v4 Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4AE34731.5000102@windriver.com \
--to=tom.rix@windriver.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.