From: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
To: Jan Kiszka <jan.kiszka@domain.hid>
Cc: xenomai-help <xenomai@xenomai.org>
Subject: Re: [Xenomai-help] RTnet install problem: Xenomai configuration tool not found
Date: Wed, 28 Oct 2009 18:05:03 +0100 [thread overview]
Message-ID: <4AE879BF.5070308@domain.hid> (raw)
In-Reply-To: <4AE8789B.2020907@domain.hid>
Jan Kiszka wrote:
> [ Please keep the CCs intact. ]
>
> Benjamin Biegel wrote:
>> Is this in my /boot/config-2.6.28.9 file? Here i see that CONFIG_PCI_MSI=y.
>>
>> Is this something set up when i compile the patched kernel? Or how do I run without the above setting?
>
> Reconfigure your kernel (make menuconfig/xconfig/<whatever>config) and
> rebuild it. Without MSI support, interrupts will fall back to IOAPIC
> handling which /may/ cause other problems (shared IRQ conflicts between
> Xenomai and Linux), but let's check this first.
Please be sure to enable ACPI, except ACPI_PROCESSOR. Disabling ACPI may
be the cause of some issues (I have been beaten again by this issue
recently).
--
Gilles
next prev parent reply other threads:[~2009-10-28 17:05 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-28 11:30 [Xenomai-help] RTnet install problem: Xenomai configuration tool not found Benjamin Biegel
2009-10-28 11:46 ` Jan Kiszka
[not found] ` <4AE855A8.2070106@domain.hid>
2009-10-28 14:44 ` Jan Kiszka
[not found] ` <4AE86123.9060602@domain.hid>
2009-10-28 17:00 ` Jan Kiszka
2009-10-28 17:05 ` Gilles Chanteperdrix [this message]
2009-10-29 10:37 ` Benjamin Biegel
2009-10-29 11:47 ` Jan Kiszka
2009-10-29 12:30 ` Benjamin Biegel
2009-10-29 13:19 ` Jan Kiszka
2009-10-29 20:09 ` Benjamin Biegel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4AE879BF.5070308@domain.hid \
--to=gilles.chanteperdrix@xenomai.org \
--cc=jan.kiszka@domain.hid \
--cc=xenomai@xenomai.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.