From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <4AE957DF.3090904@domain.hid> Date: Thu, 29 Oct 2009 09:52:47 +0100 From: Gilles Chanteperdrix MIME-Version: 1.0 References: <1B242B31-29DB-4363-8B08-8E77B2928C34@domain.hid> In-Reply-To: <1B242B31-29DB-4363-8B08-8E77B2928C34@domain.hid> Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Subject: Re: [Xenomai-help] analog output device with comedi/analogy -- suddenly threads don't work anymore List-Id: Help regarding installation and common use of Xenomai List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Stefan Schaal Cc: xenomai@xenomai.org, Peter Pastor Sampedro Stefan Schaal wrote: > Hi, > > this is following up on an installation of Alex's Xenomai tree on > Ubuntu 9.04 running the 2.6.29.5 kernel. While we managed to talk to > the NI data acquisition board we have with this tree, we suddenly > discovered that some of our other software doesn't work anymore, in > particular threads. Below is a tiny program to run a thread, and the > compile statement we use. The thread never starts running. Does > anybody know what is going wrong here? > > Thanks a lot for any hint! > > Best wishes, > > -Stefan > > compile statement: > > gcc -o xtest xeno_thread_test.c -I/Network/Servers/duerer/clmc/prog/ > include -I/usr/xenomai/include -I/usr/xenomai/include/posix - > D_GNU_SOURCE -D_REENTRANT -Wall -pipe -D__XENO__ -Wl,@/usr/xenomai/lib/ > posix.wrappers -L/usr/xenomai/lib -lpthread_rt -lpthread -lrt > > > run the executable: > > unix> xtest (which should generate some print-outs, but it doesn't ...) Could you send me (privately), the xtest binary? -- Gilles.