From: Andreas Regel <andreas.regel@gmx.de>
To: linux-media@vger.kernel.org
Subject: [PATCH 9/9] stv090x: corrections of some register values, blind scan related fixes
Date: Mon, 02 Nov 2009 23:51:44 +0100 [thread overview]
Message-ID: <4AEF6280.20609@gmx.de> (raw)
This patch adds corrections of some register values. It also contains some blind scan related fixes.
Signed-off-by: Andreas Regel <andreas.regel@gmx.de>
diff -r e8ae419fa64f linux/drivers/media/dvb/frontends/stv090x.c
--- a/linux/drivers/media/dvb/frontends/stv090x.c Mon Nov 02 23:16:29 2009 +0100
+++ b/linux/drivers/media/dvb/frontends/stv090x.c Mon Nov 02 23:25:35 2009 +0100
@@ -1969,6 +1969,8 @@
goto err;
}
+ if (stv090x_set_vit_thtracq(state) < 0)
+ goto err;
break;
case STV090x_SEARCH_AUTO:
@@ -2009,17 +2011,8 @@
goto err;
}
- if (state->srate >= 2000000) {
- /* Srate >= 2MSPS, Viterbi threshold to acquire */
- if (stv090x_set_vit_thacq(state) < 0)
- goto err;
- } else {
- /* Srate < 2MSPS, Reset Viterbi thresholdto track
- * and then re-acquire
- */
- if (stv090x_set_vit_thtracq(state) < 0)
- goto err;
- }
+ if (stv090x_set_vit_thacq(state) < 0)
+ goto err;
if (stv090x_set_viterbi(state) < 0)
goto err;
@@ -2153,6 +2146,9 @@
if (STV090x_WRITE_DEMOD(state, DMDCFG2, reg) < 0)
goto err;
+ if (STV090x_WRITE_DEMOD(state, RTC, 0x88) < 0)
+ goto err;
+
if (state->dev_ver >= 0x20) {
/*Frequency offset detector setting*/
if (state->srate < 2000000) {
@@ -2161,7 +2157,7 @@
if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x39) < 0)
goto err;
} else {
- /* Cut 2 */
+ /* Cut 3 */
if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x89) < 0)
goto err;
}
@@ -2170,8 +2166,12 @@
} else if (state->srate < 10000000) {
if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x4c) < 0)
goto err;
+ if (STV090x_WRITE_DEMOD(state, CARHDR, 0x20) < 0)
+ goto err;
} else {
if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x4b) < 0)
+ goto err;
+ if (STV090x_WRITE_DEMOD(state, CARHDR, 0x20) < 0)
goto err;
}
} else {
@@ -2220,8 +2220,8 @@
if (STV090x_WRITE_DEMOD(state, AGC2REF, 0x38) < 0)
goto err;
reg = STV090x_READ_DEMOD(state, DMDCFGMD);
- STV090x_SETFIELD_Px(reg, SCAN_ENABLE_FIELD, 1);
- STV090x_SETFIELD_Px(reg, CFR_AUTOSCAN_FIELD, 1);
+ STV090x_SETFIELD_Px(reg, SCAN_ENABLE_FIELD, 0);
+ STV090x_SETFIELD_Px(reg, CFR_AUTOSCAN_FIELD, 0);
if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0)
goto err;
@@ -2238,10 +2238,8 @@
if (stv090x_set_srate(state, 1000000) < 0)
goto err;
- steps = -1 + state->search_range / 1000000;
- steps /= 2;
- steps = (2 * steps) + 1;
- if (steps < 0)
+ steps = state->search_range / 1000000;
+ if (steps <= 0)
steps = 1;
dir = 1;
@@ -2327,13 +2325,15 @@
goto err;
if (STV090x_WRITE_DEMOD(state, TMGCFG, 0x12) < 0)
goto err;
+ if (STV090x_WRITE_DEMOD(state, TMGCFG2, 0xc0) < 0)
+ goto err;
if (STV090x_WRITE_DEMOD(state, TMGTHRISE, 0xf0) < 0)
goto err;
if (STV090x_WRITE_DEMOD(state, TMGTHFALL, 0xe0) < 0)
goto err;
reg = STV090x_READ_DEMOD(state, DMDCFGMD);
STV090x_SETFIELD_Px(reg, SCAN_ENABLE_FIELD, 1);
- STV090x_SETFIELD_Px(reg, CFR_AUTOSCAN_FIELD, 1);
+ STV090x_SETFIELD_Px(reg, CFR_AUTOSCAN_FIELD, 0);
if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0)
goto err;
@@ -2353,7 +2353,7 @@
if (state->dev_ver >= 0x30) {
if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x99) < 0)
goto err;
- if (STV090x_WRITE_DEMOD(state, SFRSTEP, 0x95) < 0)
+ if (STV090x_WRITE_DEMOD(state, SFRSTEP, 0x98) < 0)
goto err;
} else if (state->dev_ver >= 0x20) {
@@ -2388,9 +2388,16 @@
while ((!tmg_lock) && (cur_step < steps)) {
if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x5f) < 0) /* Demod RESET */
goto err;
- reg = STV090x_READ_DEMOD(state, DMDISTATE);
- STV090x_SETFIELD_Px(reg, I2C_DEMOD_MODE_FIELD, 0x00); /* trigger acquisition */
- if (STV090x_WRITE_DEMOD(state, DMDISTATE, reg) < 0)
+ if (STV090x_WRITE_DEMOD(state, CFRINIT1, 0x00) < 0)
+ goto err;
+ if (STV090x_WRITE_DEMOD(state, CFRINIT0, 0x00) < 0)
+ goto err;
+ if (STV090x_WRITE_DEMOD(state, SFRINIT1, 0x00) < 0)
+ goto err;
+ if (STV090x_WRITE_DEMOD(state, SFRINIT0, 0x00) < 0)
+ goto err;
+ /* trigger acquisition */
+ if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x40) < 0)
goto err;
msleep(50);
for (i = 0; i < 10; i++) {
@@ -2475,7 +2482,7 @@
else {
if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1f) < 0) /* Demod RESET */
goto err;
- if (STV090x_WRITE_DEMOD(state, TMGCFG2, 0x01) < 0)
+ if (STV090x_WRITE_DEMOD(state, TMGCFG2, 0xc1) < 0)
goto err;
if (STV090x_WRITE_DEMOD(state, TMGTHRISE, 0x20) < 0)
goto err;
@@ -2600,8 +2607,8 @@
u8 k_ref, k_max, k_min;
int coarse_fail, lock;
- k_max = 120;
- k_min = 30;
+ k_max = 110;
+ k_min = 10;
agc2 = stv090x_get_agc2_min_level(state);
@@ -2664,7 +2671,7 @@
lock = 0;
}
- k_ref -= 30;
+ k_ref -= 20;
} while ((k_ref >= k_min) && (!lock) && (!coarse_fail));
}
@@ -2834,17 +2841,6 @@
goto err;
STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1c);
- if (state->delsys == STV090x_DVBS2) {
- reg = STV090x_READ_DEMOD(state, DMDCFGMD);
- STV090x_SETFIELD_Px(reg, DVBS1_ENABLE_FIELD, 0);
- STV090x_SETFIELD_Px(reg, DVBS2_ENABLE_FIELD, 0);
- if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0)
- goto err;
- STV090x_SETFIELD_Px(reg, DVBS1_ENABLE_FIELD, 1);
- STV090x_SETFIELD_Px(reg, DVBS2_ENABLE_FIELD, 1);
- if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0)
- goto err;
- }
if (STV090x_WRITE_DEMOD(state, CFRINIT1, 0x00) < 0)
goto err;
if (STV090x_WRITE_DEMOD(state, CFRINIT0, 0x00) < 0)
@@ -3604,6 +3600,9 @@
goto err;
#endif
blind_tune = 1;
+
+ if (stv090x_dvbs_track_crl(state) < 0)
+ goto err;
}
if (state->dev_ver >= 0x20) {
@@ -3876,8 +3875,13 @@
goto err;
if (state->dev_ver >= 0x20) {
- if (STV090x_WRITE_DEMOD(state, CORRELABS, 0x9e) < 0) /* cut 2.0 */
- goto err;
+ if (state->srate > 5000000) {
+ if (STV090x_WRITE_DEMOD(state, CORRELABS, 0x9e) < 0)
+ goto err;
+ } else {
+ if (STV090x_WRITE_DEMOD(state, CORRELABS, 0x82) < 0)
+ goto err;
+ }
}
stv090x_get_lock_tmg(state);
reply other threads:[~2009-11-02 22:51 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4AEF6280.20609@gmx.de \
--to=andreas.regel@gmx.de \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.