From: Martin Rod <martin.rod@email.cz>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: linux-media@vger.kernel.org
Subject: Re: MSI StarCam Racer - No valid video chain found
Date: Wed, 04 Nov 2009 23:03:16 +0100 [thread overview]
Message-ID: <4AF1FA24.4090608@email.cz> (raw)
In-Reply-To: <200911041609.29721.laurent.pinchart@ideasonboard.com>
[-- Attachment #1: Type: text/plain, Size: 961 bytes --]
Hi Laurent,
I send you log file with trace (kernel 2.6.30.9)
I have tried this kernel (on UBNT RouterStation and OpenWrt) with results:
2.6.28.10. - camera works, I tried only snapshots (I have to use
external power for USB, without external power sometimes works,
sometimes no ...)
2.6.31.5 - kernel copmpiles ok, but uvcvideo module was missing, I don't
know why ...
Thanks,
Martin
Laurent Pinchart napsal(a):
> Hi Martin,
>
> On Monday 02 November 2009 21:31:50 Martin Rod wrote:
>
>> Hi Laurent,
>>
>> I send you output of lsusb. I think, that the uvcdriver is the latest. I
>> try older kernel tomorrow.
>>
>
> Could you please load the driver with trace=255 (modprobe uvcvideo trace=255)
> or, if the driver is already loaded, change the trace parameter to 255 (echo
> 255 > /sys/module/uvcvideo/parameters/trace), plug your camera and send me the
> messages printed by the uvcvideo driver to the kernel log?
>
> Thanks.
>
>
[-- Attachment #2: log_trace.txt --]
[-- Type: text/plain, Size: 2013 bytes --]
usb 1-1: USB disconnect, address 3
usb 1-1: new high speed USB device using ar71xx-ehci and address 4
usb 1-1: configuration #1 chosen from 1 choice
uvcvideo: Probing generic UVC device 1
uvcvideo: Found format YUV 4:2:2 (YUYV).
uvcvideo: - 640x480 (30.0 fps)
uvcvideo: - 352x288 (30.0 fps)
uvcvideo: - 320x240 (30.0 fps)
uvcvideo: - 176x144 (30.0 fps)
uvcvideo: - 160x120 (30.0 fps)
uvcvideo: device 4 videostreaminginterface 1 frame index 9 out of range
uvcvideo: Found a Status endpoint (addr 83).
uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62e0)
uvcvideo: Added control 00000000-0000-0000-0000-000000000101/2 to device 1 entity 3
uvcvideo: Added control 00000000-0000-0000-0000-000000000101/3 to device 1 entity 3
uvcvideo: Added control 00000000-0000-0000-0000-000000000101/6 to device 1 entity 3
uvcvideo: Added control 00000000-0000-0000-0000-000000000101/7 to device 1 entity 3
uvcvideo: Added control 00000000-0000-0000-0000-000000000101/8 to device 1 entity 3
uvcvideo: Added control 00000000-0000-0000-0000-000000000101/9 to device 1 entity 3
uvcvideo: Added control 00000000-0000-0000-0000-000000000101/10 to device 1 entity 3
uvcvideo: Added control 00000000-0000-0000-0000-000000000101/1 to device 1 entity 3
uvcvideo: Added control 00000000-0000-0000-0000-000000000101/4 to device 1 entity 3
uvcvideo: Added control 00000000-0000-0000-0000-000000000101/5 to device 1 entity 3
uvcvideo: Added control 00000000-0000-0000-0000-000000000101/11 to device 1 entity 3
uvcvideo: Added control 00000000-0000-0000-0000-000000000001/2 to device 1 entity 1
uvcvideo: Added control 00000000-0000-0000-0000-000000000001/3 to device 1 entity 1
uvcvideo: Added control 00000000-0000-0000-0000-000000000001/4 to device 1 entity 1
uvcvideo: Added control 00000000-0000-0000-0000-000000000001/11 to device 1 entity 1
uvcvideo: Added control 00000000-0000-0000-0000-000000000001/13 to device 1 entity 1
uvcvideo: Scanning UVC chain: OT 2 <- XU 5 <- XU 4 <- PU 3 <- IT 1
uvcvideo: No valid video chain found.
next prev parent reply other threads:[~2009-11-04 22:03 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-01 8:52 MSI StarCam Racer - No valid video chain found Martin Rod
2009-11-02 13:37 ` Laurent Pinchart
2009-11-02 20:31 ` Martin Rod
2009-11-04 15:09 ` Laurent Pinchart
2009-11-04 22:03 ` Martin Rod [this message]
2009-11-11 0:09 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4AF1FA24.4090608@email.cz \
--to=martin.rod@email.cz \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.