All of lore.kernel.org
 help / color / mirror / Atom feed
From: Shinya Kuribayashi <shinya.kuribayashi-jaWZhaxaiAMAvxtiuMwx3w@public.gmane.org>
To: baruch-NswTu9S1W3P6gbPvEgmw2w@public.gmane.org,
	ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org,
	linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH v2 01/22] i2c-designware: Consolidate to use 32-bit word accesses
Date: Fri, 06 Nov 2009 21:43:52 +0900	[thread overview]
Message-ID: <4AF41A08.1010105@necel.com> (raw)
In-Reply-To: <4AF419B6.1000802-jaWZhaxaiAMAvxtiuMwx3w@public.gmane.org>

This driver looks originally meant for armel machines where readw()/
writew() works perfectly fine with this hardware.  But that doens't
work for big-endian systems.

This patch converts all 8/16-bit-aware usages to 32-bit variants.

Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi-jaWZhaxaiAMAvxtiuMwx3w@public.gmane.org>
Acked-by: Baruch Siach <baruch-NswTu9S1W3P6gbPvEgmw2w@public.gmane.org>
---
 drivers/i2c/busses/i2c-designware.c |   76 +++++++++++++++++-----------------
 1 files changed, 38 insertions(+), 38 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware.c b/drivers/i2c/busses/i2c-designware.c
index b444762..a4f928e 100644
--- a/drivers/i2c/busses/i2c-designware.c
+++ b/drivers/i2c/busses/i2c-designware.c
@@ -162,14 +162,14 @@ struct dw_i2c_dev {
 	struct i2c_msg		*msgs;
 	int			msgs_num;
 	int			msg_write_idx;
-	u16			tx_buf_len;
+	u32			tx_buf_len;
 	u8			*tx_buf;
 	int			msg_read_idx;
-	u16			rx_buf_len;
+	u32			rx_buf_len;
 	u8			*rx_buf;
 	int			msg_err;
 	unsigned int		status;
-	u16			abort_source;
+	u32			abort_source;
 	int			irq;
 	struct i2c_adapter	adapter;
 	unsigned int		tx_fifo_depth;
@@ -187,25 +187,25 @@ struct dw_i2c_dev {
 static void i2c_dw_init(struct dw_i2c_dev *dev)
 {
 	u32 input_clock_khz = clk_get_rate(dev->clk) / 1000;
-	u16 ic_con;
+	u32 ic_con;
 
 	/* Disable the adapter */
-	writeb(0, dev->base + DW_IC_ENABLE);
+	writel(0, dev->base + DW_IC_ENABLE);
 
 	/* set standard and fast speed deviders for high/low periods */
-	writew((input_clock_khz * 40 / 10000)+1, /* std speed high, 4us */
+	writel((input_clock_khz * 40 / 10000)+1, /* std speed high, 4us */
 			dev->base + DW_IC_SS_SCL_HCNT);
-	writew((input_clock_khz * 47 / 10000)+1, /* std speed low, 4.7us */
+	writel((input_clock_khz * 47 / 10000)+1, /* std speed low, 4.7us */
 			dev->base + DW_IC_SS_SCL_LCNT);
-	writew((input_clock_khz *  6 / 10000)+1, /* fast speed high, 0.6us */
+	writel((input_clock_khz *  6 / 10000)+1, /* fast speed high, 0.6us */
 			dev->base + DW_IC_FS_SCL_HCNT);
-	writew((input_clock_khz * 13 / 10000)+1, /* fast speed low, 1.3us */
+	writel((input_clock_khz * 13 / 10000)+1, /* fast speed low, 1.3us */
 			dev->base + DW_IC_FS_SCL_LCNT);
 
 	/* configure the i2c master */
 	ic_con = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
 		DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_FAST;
-	writew(ic_con, dev->base + DW_IC_CON);
+	writel(ic_con, dev->base + DW_IC_CON);
 }
 
 /*
@@ -215,7 +215,7 @@ static int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev)
 {
 	int timeout = TIMEOUT;
 
-	while (readb(dev->base + DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) {
+	while (readl(dev->base + DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) {
 		if (timeout <= 0) {
 			dev_warn(dev->dev, "timeout waiting for bus ready\n");
 			return -ETIMEDOUT;
@@ -239,29 +239,29 @@ i2c_dw_xfer_msg(struct i2c_adapter *adap)
 	struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
 	struct i2c_msg *msgs = dev->msgs;
 	int num = dev->msgs_num;
-	u16 ic_con, intr_mask;
-	int tx_limit = dev->tx_fifo_depth - readb(dev->base + DW_IC_TXFLR);
-	int rx_limit = dev->rx_fifo_depth - readb(dev->base + DW_IC_RXFLR);
-	u16 addr = msgs[dev->msg_write_idx].addr;
-	u16 buf_len = dev->tx_buf_len;
+	u32 ic_con, intr_mask;
+	int tx_limit = dev->tx_fifo_depth - readl(dev->base + DW_IC_TXFLR);
+	int rx_limit = dev->rx_fifo_depth - readl(dev->base + DW_IC_RXFLR);
+	u32 addr = msgs[dev->msg_write_idx].addr;
+	u32 buf_len = dev->tx_buf_len;
 
 	if (!(dev->status & STATUS_WRITE_IN_PROGRESS)) {
 		/* Disable the adapter */
-		writeb(0, dev->base + DW_IC_ENABLE);
+		writel(0, dev->base + DW_IC_ENABLE);
 
 		/* set the slave (target) address */
-		writew(msgs[dev->msg_write_idx].addr, dev->base + DW_IC_TAR);
+		writel(msgs[dev->msg_write_idx].addr, dev->base + DW_IC_TAR);
 
 		/* if the slave address is ten bit address, enable 10BITADDR */
-		ic_con = readw(dev->base + DW_IC_CON);
+		ic_con = readl(dev->base + DW_IC_CON);
 		if (msgs[dev->msg_write_idx].flags & I2C_M_TEN)
 			ic_con |= DW_IC_CON_10BITADDR_MASTER;
 		else
 			ic_con &= ~DW_IC_CON_10BITADDR_MASTER;
-		writew(ic_con, dev->base + DW_IC_CON);
+		writel(ic_con, dev->base + DW_IC_CON);
 
 		/* Enable the adapter */
-		writeb(1, dev->base + DW_IC_ENABLE);
+		writel(1, dev->base + DW_IC_ENABLE);
 	}
 
 	for (; dev->msg_write_idx < num; dev->msg_write_idx++) {
@@ -287,10 +287,10 @@ i2c_dw_xfer_msg(struct i2c_adapter *adap)
 
 		while (buf_len > 0 && tx_limit > 0 && rx_limit > 0) {
 			if (msgs[dev->msg_write_idx].flags & I2C_M_RD) {
-				writew(0x100, dev->base + DW_IC_DATA_CMD);
+				writel(0x100, dev->base + DW_IC_DATA_CMD);
 				rx_limit--;
 			} else
-				writew(*(dev->tx_buf++),
+				writel(*(dev->tx_buf++),
 						dev->base + DW_IC_DATA_CMD);
 			tx_limit--; buf_len--;
 		}
@@ -302,7 +302,7 @@ i2c_dw_xfer_msg(struct i2c_adapter *adap)
 		dev->status |= STATUS_WRITE_IN_PROGRESS;
 	} else
 		dev->status &= ~STATUS_WRITE_IN_PROGRESS;
-	writew(intr_mask, dev->base + DW_IC_INTR_MASK);
+	writel(intr_mask, dev->base + DW_IC_INTR_MASK);
 
 	dev->tx_buf_len = buf_len;
 }
@@ -313,11 +313,11 @@ i2c_dw_read(struct i2c_adapter *adap)
 	struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
 	struct i2c_msg *msgs = dev->msgs;
 	int num = dev->msgs_num;
-	u16 addr = msgs[dev->msg_read_idx].addr;
-	int rx_valid = readw(dev->base + DW_IC_RXFLR);
+	u32 addr = msgs[dev->msg_read_idx].addr;
+	int rx_valid = readl(dev->base + DW_IC_RXFLR);
 
 	for (; dev->msg_read_idx < num; dev->msg_read_idx++) {
-		u16 len;
+		u32 len;
 		u8 *buf;
 
 		if (!(msgs[dev->msg_read_idx].flags & I2C_M_RD))
@@ -336,7 +336,7 @@ i2c_dw_read(struct i2c_adapter *adap)
 		}
 
 		for (; len > 0 && rx_valid > 0; len--, rx_valid--)
-			*buf++ = readb(dev->base + DW_IC_DATA_CMD);
+			*buf++ = readl(dev->base + DW_IC_DATA_CMD);
 
 		if (len > 0) {
 			dev->status |= STATUS_READ_IN_PROGRESS;
@@ -398,7 +398,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 		do {
 			i2c_dw_read(adap);
 		} while (dev->status & STATUS_READ_IN_PROGRESS);
-		writeb(0, dev->base + DW_IC_ENABLE);
+		writel(0, dev->base + DW_IC_ENABLE);
 		ret = num;
 		goto done;
 	}
@@ -428,7 +428,7 @@ static u32 i2c_dw_func(struct i2c_adapter *adap)
 static void dw_i2c_pump_msg(unsigned long data)
 {
 	struct dw_i2c_dev *dev = (struct dw_i2c_dev *) data;
-	u16 intr_mask;
+	u32 intr_mask;
 
 	i2c_dw_read(&dev->adapter);
 	i2c_dw_xfer_msg(&dev->adapter);
@@ -436,7 +436,7 @@ static void dw_i2c_pump_msg(unsigned long data)
 	intr_mask = DW_IC_INTR_STOP_DET | DW_IC_INTR_TX_ABRT;
 	if (dev->status & STATUS_WRITE_IN_PROGRESS)
 		intr_mask |= DW_IC_INTR_TX_EMPTY;
-	writew(intr_mask, dev->base + DW_IC_INTR_MASK);
+	writel(intr_mask, dev->base + DW_IC_INTR_MASK);
 }
 
 /*
@@ -446,19 +446,19 @@ static void dw_i2c_pump_msg(unsigned long data)
 static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
 {
 	struct dw_i2c_dev *dev = dev_id;
-	u16 stat;
+	u32 stat;
 
-	stat = readw(dev->base + DW_IC_INTR_STAT);
+	stat = readl(dev->base + DW_IC_INTR_STAT);
 	dev_dbg(dev->dev, "%s: stat=0x%x\n", __func__, stat);
 	if (stat & DW_IC_INTR_TX_ABRT) {
-		dev->abort_source = readw(dev->base + DW_IC_TX_ABRT_SOURCE);
+		dev->abort_source = readl(dev->base + DW_IC_TX_ABRT_SOURCE);
 		dev->cmd_err |= DW_IC_ERR_TX_ABRT;
 		dev->status = STATUS_IDLE;
 	} else if (stat & DW_IC_INTR_TX_EMPTY)
 		tasklet_schedule(&dev->pump_msg);
 
-	readb(dev->base + DW_IC_CLR_INTR);	/* clear interrupts */
-	writew(0, dev->base + DW_IC_INTR_MASK);	/* disable interrupts */
+	readl(dev->base + DW_IC_CLR_INTR);	/* clear interrupts */
+	writel(0, dev->base + DW_IC_INTR_MASK);	/* disable interrupts */
 	if (stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET))
 		complete(&dev->cmd_complete);
 
@@ -531,7 +531,7 @@ static int __devinit dw_i2c_probe(struct platform_device *pdev)
 	}
 	i2c_dw_init(dev);
 
-	writew(0, dev->base + DW_IC_INTR_MASK); /* disable IRQ */
+	writel(0, dev->base + DW_IC_INTR_MASK); /* disable IRQ */
 	r = request_irq(dev->irq, i2c_dw_isr, 0, pdev->name, dev);
 	if (r) {
 		dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq);
@@ -587,7 +587,7 @@ static int __devexit dw_i2c_remove(struct platform_device *pdev)
 	clk_put(dev->clk);
 	dev->clk = NULL;
 
-	writeb(0, dev->base + DW_IC_ENABLE);
+	writel(0, dev->base + DW_IC_ENABLE);
 	free_irq(dev->irq, dev);
 	kfree(dev);
 
-- 
1.6.5.2

  parent reply	other threads:[~2009-11-06 12:43 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-11-06 12:42 [PATCH v2] i2c-designware updates Shinya Kuribayashi
2009-11-06 12:42 ` Shinya Kuribayashi
2009-11-06 12:42 ` Shinya Kuribayashi
     [not found] ` <4AF419B6.1000802-jaWZhaxaiAMAvxtiuMwx3w@public.gmane.org>
2009-11-06 12:43   ` Shinya Kuribayashi [this message]
2009-11-06 12:44   ` [PATCH v2 02/22] i2c-designware: Don't use the IC_CLR_INTR register to clear interrupts Shinya Kuribayashi
2009-11-06 12:45   ` [PATCH v2 03/22] i2c-designware: Use platform_get_irq helper Shinya Kuribayashi
2009-11-06 12:45   ` [PATCH v2 04/22] i2c-designware: i2c_dw_read: Use "struct dw_i2c_dev" pointer Shinya Kuribayashi
2009-11-06 12:46   ` [PATCH v2 05/22] i2c-designware: i2c_dw_xfer_msg: " Shinya Kuribayashi
2009-11-06 12:46   ` [PATCH v2 06/22] i2c-designware: Remove an useless local variable "num" Shinya Kuribayashi
2009-11-06 12:47   ` [PATCH v2 07/22] i2c-designware: Improved _HCNT/_LCNT calculation Shinya Kuribayashi
2009-11-06 12:47   ` [PATCH v2 08/22] i2c-designware: i2c_dw_xfer_msg: Fix i2c_msg search bug Shinya Kuribayashi
2009-11-06 12:47   ` [PATCH v2 09/22] i2c-designware: Process i2c_msg messages in the interrupt handler Shinya Kuribayashi
2009-11-06 12:48   ` [PATCH v2 10/22] i2c-designware: Set Tx/Rx FIFO threshold levels Shinya Kuribayashi
2009-11-06 12:48   ` [PATCH v2 11/22] i2c-designware: Enable RX_FULL interrupt Shinya Kuribayashi
2009-11-06 12:48   ` [PATCH v2 12/22] i2c-designware: Divide i2c_dw_xfer_msg into two functions Shinya Kuribayashi
2009-11-06 12:49   ` [PATCH v2 13/22] i2c-designware: i2c_dw_xfer_msg: Introduce a local "buf" pointer Shinya Kuribayashi
2009-11-06 12:49   ` [PATCH v2 14/22] i2c-designware: Initialize byte count variables just prior to being used Shinya Kuribayashi
2009-11-06 12:50   ` [PATCH v2 15/22] i2c-designware: i2c_dw_func: Set I2C_FUNC_SMBUS_foo bits Shinya Kuribayashi
2009-11-06 12:50   ` [PATCH v2 16/22] i2c-designware: i2c_dw_read: Remove redundant target address checker Shinya Kuribayashi
2009-11-06 12:50   ` [PATCH v2 17/22] i2c-designware: Process all i2c_msg messages in the interrupt handler Shinya Kuribayashi
2009-11-06 12:51   ` [PATCH v2 18/22] i2c-designware: Disable TX_EMPTY when all i2c_msg msgs has been processed Shinya Kuribayashi
2009-11-06 12:51   ` [PATCH v2 19/22] i2c-designware: i2c_dw_xfer_msg: Fix error handling procedures Shinya Kuribayashi
2009-11-06 12:51   ` [PATCH v2 20/22] i2c-designware: Skip RX_FULL and TX_EMPTY bits on tx abort errors Shinya Kuribayashi
2009-11-06 12:51   ` [PATCH v2 21/22] i2c-designware: Tx abort cleanups Shinya Kuribayashi
     [not found]     ` <4AF41BED.1050406-jaWZhaxaiAMAvxtiuMwx3w@public.gmane.org>
2009-11-12  4:29       ` Shinya Kuribayashi
     [not found]         ` <4AFB8F3A.6060208-jaWZhaxaiAMAvxtiuMwx3w@public.gmane.org>
2009-11-14 22:22           ` Ben Dooks
     [not found]             ` <20091114222249.GM13398-elnMNo+KYs3pIgCt6eIbzw@public.gmane.org>
2009-11-16 11:27               ` Shinya Kuribayashi
2009-11-06 12:52   ` [PATCH v2 22/22] i2c-designware: Cosmetic cleanups Shinya Kuribayashi
2009-11-06 22:25   ` [PATCH v2] i2c-designware updates Ben Dooks
2009-11-06 22:25     ` Ben Dooks
2009-11-06 22:25     ` Ben Dooks
2009-11-16 11:40   ` [PATCH 23/22] i2c-designware: i2c_dw_handle_tx_abort: Use dev_dbg() for NOACK cases Shinya Kuribayashi
2009-11-16 11:40     ` Shinya Kuribayashi
2009-11-16 11:40     ` Shinya Kuribayashi
2009-11-23 23:11   ` [PATCH v2] i2c-designware updates Ben Dooks
2009-11-23 23:11     ` Ben Dooks
2009-11-23 23:11     ` Ben Dooks

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4AF41A08.1010105@necel.com \
    --to=shinya.kuribayashi-jawzhaxaiamavxtiumwx3w@public.gmane.org \
    --cc=baruch-NswTu9S1W3P6gbPvEgmw2w@public.gmane.org \
    --cc=ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org \
    --cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.