Re: [PATCH 1/2 (for-next)] ARM: OMAP3: Add support for the IGEP v2 board (rev B)

[Daniel Toussaint <daniel@dmhome.net>]

Frédéric BEGOU wrote:
> Hello,
>
> For what I've seen on the Internet concerning your card, there is only 
> one MMC card reader.
> Besides, there is the following piece of code :
>
>> +static struct twl4030_hsmmc_info mmc[] = {
>> +       {
>> +               .mmc            = 1,
>> +               .wires          = 4,
>> +               .gpio_cd        = -EINVAL,
>> +               .gpio_wp        = -EINVAL,
>> +       },
>> +       {
>> +               .mmc            = 2,
>> +               .wires          = 4,
>> +               .gpio_cd        = -EINVAL,
>> +               .gpio_wp        = -EINVAL,
>> +       },
>> +       {}      /* Terminator */
>> +};
>
> Maybe I am mistaken, but doesn't that mean there are two MMC cards ?
>
> I am interested in the subject, as I am trying to write my own board 
> file for our custom, beagleboard-based card, with no success so far 
> concerning the second MMC reader...

Well, it seems that the board is question has a WIFI module connected to 
the second mmc. What is your problem right now ? Remember that all three 
MMC slots are different  in what kind of voltage they can drive.




--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html