From: "Németh Márton" <nm127@freemail.hu>
To: Hans de Goede <hdegoede@redhat.com>, linux-input@vger.kernel.org
Cc: Jean-Francois Moine <moinejf@free.fr>,
V4L Mailing List <linux-media@vger.kernel.org>
Subject: Re: [RFC, PATCH 2/2] gspca pac7302: add support for camera button
Date: Sat, 21 Nov 2009 12:16:59 +0100 [thread overview]
Message-ID: <4B07CC2B.2020301@freemail.hu> (raw)
In-Reply-To: <4B0641CF.1000000@freemail.hu>
From: Márton Németh <nm127@freemail.hu>
Add support for snapshot button found on Labtec Webcam 2200.
Signed-off-by: Márton Németh <nm127@freemail.hu>
---
diff -r abfdd03b800d linux/drivers/media/video/gspca/pac7302.c
--- a/linux/drivers/media/video/gspca/pac7302.c Thu Nov 19 10:34:21 2009 +0100
+++ b/linux/drivers/media/video/gspca/pac7302.c Sat Nov 21 13:02:44 2009 +0100
@@ -68,8 +68,10 @@
#define MODULE_NAME "pac7302"
+#include <linux/input.h>
#include <media/v4l2-chip-ident.h>
#include "gspca.h"
+#include "input.h"
MODULE_AUTHOR("Thomas Kaiser thomas@kaiser-linux.li");
MODULE_DESCRIPTION("Pixart PAC7302");
@@ -1220,6 +1222,37 @@
}
#endif
+#ifdef CONFIG_INPUT
+static int sd_int_pkt_scan(struct gspca_dev *gspca_dev,
+ u8 *data, /* interrupt packet data */
+ int len) /* interrput packet length */
+{
+ int ret = -EINVAL;
+ u8 data0, data1;
+
+ if (len == 2) {
+ data0 = data[0];
+ data1 = data[1];
+ if ((data0 == 0x00 && data1 == 0x11) ||
+ (data0 == 0x22 && data1 == 0x33) ||
+ (data0 == 0x44 && data1 == 0x55) ||
+ (data0 == 0x66 && data1 == 0x77) ||
+ (data0 == 0x88 && data1 == 0x99) ||
+ (data0 == 0xaa && data1 == 0xbb) ||
+ (data0 == 0xcc && data1 == 0xdd) ||
+ (data0 == 0xee && data1 == 0xff)) {
+ input_report_key(gspca_dev->input_dev, KEY_CAMERA, 1);
+ input_sync(gspca_dev->input_dev);
+ input_report_key(gspca_dev->input_dev, KEY_CAMERA, 0);
+ input_sync(gspca_dev->input_dev);
+ ret = 0;
+ }
+ }
+
+ return ret;
+}
+#endif
+
/* sub-driver description for pac7302 */
static struct sd_desc sd_desc = {
.name = MODULE_NAME,
@@ -1236,6 +1269,9 @@
.set_register = sd_dbg_s_register,
.get_chip_ident = sd_chip_ident,
#endif
+#ifdef CONFIG_INPUT
+ .int_pkt_scan = sd_int_pkt_scan,
+#endif
};
/* -- module initialisation -- */
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: "Németh Márton" <nm127@freemail.hu>
To: Hans de Goede <hdegoede@redhat.com>, linux-input@vger.kernel.org
Cc: Jean-Francois Moine <moinejf@free.fr>,
V4L Mailing List <linux-media@vger.kernel.org>
Subject: Re: [RFC, PATCH 2/2] gspca pac7302: add support for camera button
Date: Sat, 21 Nov 2009 12:16:59 +0100 [thread overview]
Message-ID: <4B07CC2B.2020301@freemail.hu> (raw)
In-Reply-To: <4B0641CF.1000000@freemail.hu>
From: Márton Németh <nm127@freemail.hu>
Add support for snapshot button found on Labtec Webcam 2200.
Signed-off-by: Márton Németh <nm127@freemail.hu>
---
diff -r abfdd03b800d linux/drivers/media/video/gspca/pac7302.c
--- a/linux/drivers/media/video/gspca/pac7302.c Thu Nov 19 10:34:21 2009 +0100
+++ b/linux/drivers/media/video/gspca/pac7302.c Sat Nov 21 13:02:44 2009 +0100
@@ -68,8 +68,10 @@
#define MODULE_NAME "pac7302"
+#include <linux/input.h>
#include <media/v4l2-chip-ident.h>
#include "gspca.h"
+#include "input.h"
MODULE_AUTHOR("Thomas Kaiser thomas@kaiser-linux.li");
MODULE_DESCRIPTION("Pixart PAC7302");
@@ -1220,6 +1222,37 @@
}
#endif
+#ifdef CONFIG_INPUT
+static int sd_int_pkt_scan(struct gspca_dev *gspca_dev,
+ u8 *data, /* interrupt packet data */
+ int len) /* interrput packet length */
+{
+ int ret = -EINVAL;
+ u8 data0, data1;
+
+ if (len == 2) {
+ data0 = data[0];
+ data1 = data[1];
+ if ((data0 == 0x00 && data1 == 0x11) ||
+ (data0 == 0x22 && data1 == 0x33) ||
+ (data0 == 0x44 && data1 == 0x55) ||
+ (data0 == 0x66 && data1 == 0x77) ||
+ (data0 == 0x88 && data1 == 0x99) ||
+ (data0 == 0xaa && data1 == 0xbb) ||
+ (data0 == 0xcc && data1 == 0xdd) ||
+ (data0 == 0xee && data1 == 0xff)) {
+ input_report_key(gspca_dev->input_dev, KEY_CAMERA, 1);
+ input_sync(gspca_dev->input_dev);
+ input_report_key(gspca_dev->input_dev, KEY_CAMERA, 0);
+ input_sync(gspca_dev->input_dev);
+ ret = 0;
+ }
+ }
+
+ return ret;
+}
+#endif
+
/* sub-driver description for pac7302 */
static struct sd_desc sd_desc = {
.name = MODULE_NAME,
@@ -1236,6 +1269,9 @@
.set_register = sd_dbg_s_register,
.get_chip_ident = sd_chip_ident,
#endif
+#ifdef CONFIG_INPUT
+ .int_pkt_scan = sd_int_pkt_scan,
+#endif
};
/* -- module initialisation -- */
next prev parent reply other threads:[~2009-11-21 11:16 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-19 7:46 [RFC, PATCH 2/2] gspca pac7302: add support for camera button Németh Márton
2009-11-20 7:14 ` Németh Márton
2009-11-20 7:14 ` Németh Márton
2009-11-21 11:16 ` Németh Márton [this message]
2009-11-21 11:16 ` Németh Márton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B07CC2B.2020301@freemail.hu \
--to=nm127@freemail.hu \
--cc=hdegoede@redhat.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=moinejf@free.fr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.