From: Vincent Ficet <jean-vincent.ficet-6ktuUTfB/bM@public.gmane.org>
To: kliteyn-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org
Cc: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: QOS setup issue with opensm
Date: Tue, 24 Nov 2009 11:38:23 +0100 [thread overview]
Message-ID: <4B0BB79F.9080806@bull.net> (raw)
In-Reply-To: <4B0BAF21.1020401-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
Hello Yevgeny,
> Vincent Ficet wrote:
>> Hello,
>>
>> I'm running into trouble when trying to configure QoS on opensm 3.3.2. I
>> tried several QoS setups, but unfortunately without any luck.
>> Could someone please tell me what I'm doing wrong ?
>>
>> The different combinations I tried are listed below:
>>
>> ###############################################################
>>
>> qos-policy.conf:
>>
>> qos-ulps
>> default : 0 # default SL
>> ipoib : 4 # TCP tests over IB
>> end-qos-ulps
>>
>> Nov 24 09:26:01 065823 [96B5D910] 0x01 -> __qos_policy_validate_pkey:
>> ERR AC15: pkey 0x7FFF in match rule - overriding partition SL (0) with
>> QoS Level SL (4)
>>
>> ###############################################################
>>
>> qos-policy.conf:
>>
>> qos-ulps
>> default : 0 # default SL
>> ipoib, pkey 0x0001 : 4 # TCP tests over IB
>> end-qos-ulps
>>
>> partitions.conf:
>>
>> default=0x7fff,ipoib : ALL=full;
>> backbone=0x0001,ipoib,defmember=full : 0x2c9000100d000679,
>> 0x2c9000100d00056d;
>>
>> Nov 24 09:21:43 526886 [C85A1910] 0x01 -> __qos_policy_validate_pkey:
>> ERR AC15: pkey 0x0001 in match rule - overriding partition SL (0) with
>> QoS Level SL (4)
>>
>> ###############################################################
>>
>> qos-policy.conf
>>
>> qos-ulps
>> default : 0 # default SL
>> ipoib : 4 # TCP tests over IB
>> end-qos-ulps
>>
>> partitions.conf:
>>
>> default=0x7fff : ALL=full;
>> backbone=0x0001,ipoib,defmember=full : 0x2c9000100d000679,
>> 0x2c9000100d00056d;
>>
>> Nov 24 09:46:36 576946 [640C7910] 0x01 -> __qos_policy_validate_pkey:
>> ERR AC15: pkey 0x7FFF in match rule - overriding partition SL (0) with
>> QoS Level SL (4)
>>
>> ###############################################################
>>
>> qos-policy.conf
>>
>> qos-ulps
>> default : 0 # default SL
>> ipoib : 4 # TCP tests over IB
>> end-qos-ulps
>>
>> default=0x7fff : ALL=full;
>> backbone=0x0001,defmember=full : 0x2c9000100d000679,
>> 0x2c9000100d00056d;
>>
>> Nov 24 09:51:23 666860 [6EA6B910] 0x01 -> __qos_policy_validate_pkey:
>> ERR AC15: pkey 0x7FFF in match rule - overriding partition SL (0) with
>> QoS Level SL (4)
>>
>> ###############################################################
>>
>> Did I make a mistake, or does that sound like an opensm bug ?
>
> It's neither. It's an outcome of OSM being not very user
> friendly in QoS configuration :(
>
> You're trying to assign a certain SL to IPoIB, so you
> define a partition with a certain pkey, and add a rule
> for this pkey in the QoS policy file. So far everything
> is OK.
> The problem is that SL is part of partition's parameters,
> so when you defined the partition as follows:
>
> default=0x7fff,ipoib : ALL=full;
>
> you didn't specify SL, and SM used default SL for this
> partition. In short, it is as if you defined the partition
> as follows:
>
> default=0x7fff,ipoib,sl=0 : ALL=full;
>
> Now comes the QoS policy rule that says the following:
>
> ipoib : 4 # TCP tests over IB
>
> So you have a mismatch between SLs from partition
> configuration and QoS policy. SM is aware if this
> and uses SL from QoS policy to overwrite the one
> that is stored in the partition structure.
>
> So bottom line - your configuration is correct.
Just to make sure I understand correctly. What you are saying is that
the following configuration (among the 4 alternatives I listed above) is
correct, although opensm reports an error ?
partitions.conf:
default=0x7fff,ipoib : ALL=full;
backbone=0x0001,ipoib,defmember=full : 0x2c9000100d000679,
0x2c9000100d00056d;
qos-ulps
default : 0 # default SL
ipoib : 4 # TCP tests over IB
end-qos-ulps
Thanks for your help,
Vincent
>
> -- Yevgeny
>
>
>> Thanks for your help,
>>
>> Vincent
>>
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
>> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2009-11-24 10:38 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-24 9:01 QOS setup issue with opensm Vincent Ficet
[not found] ` <4B0BA0EC.3050202-6ktuUTfB/bM@public.gmane.org>
2009-11-24 10:02 ` Yevgeny Kliteynik
[not found] ` <4B0BAF21.1020401-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
2009-11-24 10:38 ` Vincent Ficet [this message]
[not found] ` <4B0BB79F.9080806-6ktuUTfB/bM@public.gmane.org>
2009-11-24 11:17 ` Yevgeny Kliteynik
[not found] ` <4B0BC0CC.4050409-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
2009-11-24 14:35 ` Vincent Ficet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B0BB79F.9080806@bull.net \
--to=jean-vincent.ficet-6ktuutfb/bm@public.gmane.org \
--cc=kliteyn-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.