From: Breno Leitao <leitao@linux.vnet.ibm.com>
To: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Michael Chan <mchan@broadcom.com>,
"netdev@vger.kernel.org" <netdev@vger.kernel.org>
Subject: Re: [PATCH] bnx2: avoid flushing statistics when doing a MTU change
Date: Mon, 30 Nov 2009 12:05:36 -0200 [thread overview]
Message-ID: <4B13D130.8080108@linux.vnet.ibm.com> (raw)
In-Reply-To: <4B13C987.3090409@gmail.com>
Eric Dumazet wrote:
> I see nothing in the driver/patch that will consolidate bp->dev->stats
> before your memcpy(). DMA transfert doesnt touch bp->dev->stats.
You're right, calling bnx2_get_stats() after the DMA should be enough,
as the following patch
---
[PATCH] bnx2: avoid flushing statistics when doing a MTU change
Actually when bnx2 changes the interface's MTU size, it resets
the chip and consequently flushes the interface statistics.
This patch saves the statistics in a temporary space in order to
maintain the statistics correct after the chip reset.
Signed-off-by: Breno Leitao<leitao@linux.vnet.ibm.com>
---
drivers/net/bnx2.c | 57 ++++++++++++++++++++++++++++++++++++++-------------
drivers/net/bnx2.h | 1 +
2 files changed, 43 insertions(+), 15 deletions(-)
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 7fa4048..07c0376 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -6221,6 +6221,8 @@ bnx2_open(struct net_device *dev)
else if (bp->flags & BNX2_FLAG_USING_MSIX)
printk(KERN_INFO PFX "%s: using MSIX\n", dev->name);
+ memset(&bp->stats_extra, 0, sizeof(struct net_device_stats));
+
netif_tx_start_all_queues(dev);
return 0;
@@ -6469,46 +6471,58 @@ bnx2_get_stats(struct net_device *dev)
net_stats->rx_packets =
GET_NET_STATS(stats_blk->stat_IfHCInUcastPkts) +
GET_NET_STATS(stats_blk->stat_IfHCInMulticastPkts) +
- GET_NET_STATS(stats_blk->stat_IfHCInBroadcastPkts);
+ GET_NET_STATS(stats_blk->stat_IfHCInBroadcastPkts) +
+ bp->stats_extra.rx_packets;
net_stats->tx_packets =
GET_NET_STATS(stats_blk->stat_IfHCOutUcastPkts) +
GET_NET_STATS(stats_blk->stat_IfHCOutMulticastPkts) +
- GET_NET_STATS(stats_blk->stat_IfHCOutBroadcastPkts);
+ GET_NET_STATS(stats_blk->stat_IfHCOutBroadcastPkts) +
+ bp->stats_extra.tx_packets;
net_stats->rx_bytes =
- GET_NET_STATS(stats_blk->stat_IfHCInOctets);
+ GET_NET_STATS(stats_blk->stat_IfHCInOctets) +
+ bp->stats_extra.rx_bytes;
net_stats->tx_bytes =
- GET_NET_STATS(stats_blk->stat_IfHCOutOctets);
+ GET_NET_STATS(stats_blk->stat_IfHCOutOctets) +
+ bp->stats_extra.tx_bytes;
net_stats->multicast =
- GET_NET_STATS(stats_blk->stat_IfHCOutMulticastPkts);
+ GET_NET_STATS(stats_blk->stat_IfHCOutMulticastPkts) +
+ bp->stats_extra.multicast;
net_stats->collisions =
- (unsigned long) stats_blk->stat_EtherStatsCollisions;
+ (unsigned long) stats_blk->stat_EtherStatsCollisions +
+ bp->stats_extra.collisions;
net_stats->rx_length_errors =
(unsigned long) (stats_blk->stat_EtherStatsUndersizePkts +
- stats_blk->stat_EtherStatsOverrsizePkts);
+ stats_blk->stat_EtherStatsOverrsizePkts) +
+ bp->stats_extra.rx_length_errors;
net_stats->rx_over_errors =
(unsigned long) (stats_blk->stat_IfInFTQDiscards +
- stats_blk->stat_IfInMBUFDiscards);
+ stats_blk->stat_IfInMBUFDiscards) +
+ bp->stats_extra.rx_over_errors;
net_stats->rx_frame_errors =
- (unsigned long) stats_blk->stat_Dot3StatsAlignmentErrors;
+ (unsigned long) stats_blk->stat_Dot3StatsAlignmentErrors +
+ bp->stats_extra.rx_frame_errors;
net_stats->rx_crc_errors =
- (unsigned long) stats_blk->stat_Dot3StatsFCSErrors;
+ (unsigned long) stats_blk->stat_Dot3StatsFCSErrors +
+ bp->stats_extra.rx_crc_errors;
net_stats->rx_errors = net_stats->rx_length_errors +
net_stats->rx_over_errors + net_stats->rx_frame_errors +
- net_stats->rx_crc_errors;
+ net_stats->rx_crc_errors +
+ bp->stats_extra.rx_errors;
net_stats->tx_aborted_errors =
(unsigned long) (stats_blk->stat_Dot3StatsExcessiveCollisions +
- stats_blk->stat_Dot3StatsLateCollisions);
+ stats_blk->stat_Dot3StatsLateCollisions) +
+ bp->stats_extra.tx_aborted_errors;
if ((CHIP_NUM(bp) == CHIP_NUM_5706) ||
(CHIP_ID(bp) == CHIP_ID_5708_A0))
@@ -6516,7 +6530,8 @@ bnx2_get_stats(struct net_device *dev)
else {
net_stats->tx_carrier_errors =
(unsigned long)
- stats_blk->stat_Dot3StatsCarrierSenseErrors;
+ stats_blk->stat_Dot3StatsCarrierSenseErrors +
+ bp->stats_extra.tx_carrier_errors;
}
net_stats->tx_errors =
@@ -6524,11 +6539,13 @@ bnx2_get_stats(struct net_device *dev)
stats_blk->stat_emac_tx_stat_dot3statsinternalmactransmiterrors
+
net_stats->tx_aborted_errors +
- net_stats->tx_carrier_errors;
+ net_stats->tx_carrier_errors +
+ bp->stats_extra.tx_errors;
net_stats->rx_missed_errors =
(unsigned long) (stats_blk->stat_IfInFTQDiscards +
- stats_blk->stat_IfInMBUFDiscards + stats_blk->stat_FwRxDrop);
+ stats_blk->stat_IfInMBUFDiscards + stats_blk->stat_FwRxDrop) +
+ bp->stats_extra.rx_missed_errors;
return net_stats;
}
@@ -6989,6 +7006,16 @@ bnx2_change_ring_size(struct bnx2 *bp, u32 rx, u32 tx)
{
if (netif_running(bp->dev)) {
bnx2_netif_stop(bp);
+
+ /* Save statistics that is going to be reseted */
+ REG_WR(bp, BNX2_HC_COMMAND, bp->hc_cmd |
+ BNX2_HC_COMMAND_STATS_NOW);
+ REG_RD(bp, BNX2_HC_COMMAND);
+ udelay(5);
+ bnx2_get_stats(bp->dev);
+ memcpy(&bp->stats_extra, &bp->dev->stats,
+ sizeof(struct net_device_stats));
+
bnx2_reset_chip(bp, BNX2_DRV_MSG_CODE_RESET);
bnx2_free_skbs(bp);
bnx2_free_mem(bp);
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index a4d8340..1063d1a 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -6912,6 +6912,7 @@ struct bnx2 {
const struct firmware *mips_firmware;
const struct firmware *rv2p_firmware;
+ struct net_device_stats stats_extra;
};
#define REG_RD(bp, offset) \
--
1.6.0.2
next prev parent reply other threads:[~2009-11-30 14:05 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-27 16:59 [PATCH] bnx2: avoid flushing statistics when doing a MTU change leitao
2009-11-30 9:20 ` Michael Chan
2009-11-30 10:30 ` Eric Dumazet
2009-11-30 10:43 ` Michael Chan
2009-11-30 10:49 ` Eric Dumazet
2009-11-30 11:02 ` Michael Chan
2009-11-30 13:17 ` Breno Leitao
2009-11-30 13:32 ` Eric Dumazet
2009-11-30 14:05 ` Breno Leitao [this message]
2009-11-30 18:09 ` Michael Chan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B13D130.8080108@linux.vnet.ibm.com \
--to=leitao@linux.vnet.ibm.com \
--cc=eric.dumazet@gmail.com \
--cc=mchan@broadcom.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.