From: Randy Dunlap <randy.dunlap@oracle.com>
To: Borislav Petkov <borislav.petkov@amd.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>,
LKML <linux-kernel@vger.kernel.org>,
Doug Thompson <dougthompson@xmission.com>
Subject: Re: 2.6.32-rc8: amd64_edac slub error
Date: Tue, 01 Dec 2009 09:19:31 -0800 [thread overview]
Message-ID: <4B155023.1000801@oracle.com> (raw)
In-Reply-To: <20091201151639.GA670@aftab>
[-- Attachment #1: Type: text/plain, Size: 1536 bytes --]
Borislav Petkov wrote:
>> EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 2367: DRAM MEM-CTL PCI Bus ID: 0000:00:18.2
>> EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 2369: Misc device PCI Bus ID: 0000:00:18.3
>> calling alsa_pcm_init+0x0/0x71 [snd_pcm] @ 1402
>> initcall alsa_pcm_init+0x0/0x71 [snd_pcm] returned 0 after 17 usecs
>> EDAC amd64: ECC is enabled by BIOS.
>> get_cpus_on_this_dct_cpumask: nid: 0, cpu: 0
>> get_cpus_on_this_dct_cpumask: nid: 0, cpu: 2
>> amd64_nb_mce_bank_enabled_on_node: weight: 2
>> EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 2776: core: 0, MCG_CTL: 0x1f, NB MSR is enabled
>> EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 2776: core: 2, MCG_CTL: 0x0, NB MSR is disabled
>> =============================================================================
>> BUG kmalloc-16: Redzone overwritten
>> -----------------------------------------------------------------------------
>
> Hmm, I think I know what happens. This machine has non-contigious
> core enumeration on a node (e.g. 0,2 on node 0 instead of 0,1) but
> rdmsr_on_cpus assumes the former. Therefore we write outside of the
> allocated msrs struct and thus the redzone overwrite. Here's a simple
> fix that should take care of it. Please apply on top of the debugging
> patch and catch the output again so that we could verify it.
>
> I'll fix this properly when I get back and then maybe even backport it
> depending on the intrusiveness of the changes.
Hi,
Here's the new log file (attached).
thanks.
--
~Randy
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: edac2.log --]
[-- Type: text/x-log; name="edac2.log", Size: 106029 bytes --]
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-rc8 (rdunlap@ca-ostest293.us.oracle.com) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-44)) #2 SMP Tue Nov 24 14:00:39 PST 2009
Command line: ro root=/dev/cciss/c0d0p3 console=tty0 console=ttyS0,115200n8 netconsole=50000@139.185.50.77/eth0,50000@139.185.50.76/00:18:FE:34:1C:3D nmi_watchdog=2 selinux=0 debug ignore_loglevel initcall_debug print_fatal_signals=1 slub_debug=FPZ
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fe50000 (usable)
BIOS-e820: 000000007fe50000 - 000000007fe58000 (ACPI data)
BIOS-e820: 000000007fe58000 - 0000000080000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000027ffff000 (usable)
debug: ignoring loglevel setting.
DMI 2.3 present.
last_pfn = 0x27ffff max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-back
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000280000000 aka 10240M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000080000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0x7fe50 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-000000007fe50000
0000000000 - 007fe00000 page 2M
007fe00000 - 007fe50000 page 4k
kernel direct mapping tables up to 7fe50000 @ 8000-c000
init_memory_mapping: 0000000100000000-000000027ffff000
0100000000 - 027fe00000 page 2M
027fe00000 - 027ffff000 page 4k
kernel direct mapping tables up to 27ffff000 @ a000-16000
RAMDISK: 37eac000 - 37fef113
ACPI: RSDP 00000000000f4f00 00024 (v02 HP )
ACPI: XSDT 000000007fe50780 0005C (v01 HP A08 00000002 Ò? 0000162E)
ACPI: FACP 000000007fe50800 000F4 (v03 HP A08 00000002 Ò? 0000162E)
ACPI: DSDT 000000007fe50900 03F75 (v01 HP DSDT 00000001 INTL 20030228)
ACPI: FACS 000000007fe50100 00040
ACPI: SPCR 000000007fe50140 00050 (v01 HP SPCRRBSU 00000001 Ò? 0000162E)
ACPI: MCFG 000000007fe501c0 0003C (v01 HP ProLiant 00000001 00000000)
ACPI: HPET 000000007fe50200 00038 (v01 HP A08 00000002 Ò? 0000162E)
ACPI: SPMI 000000007fe50240 00040 (v05 HP ProLiant 00000001 Ò? 0000162E)
ACPI: APIC 000000007fe50280 000DE (v01 HP 00000083 00000002 00000000)
ACPI: SRAT 000000007fe50380 00110 (v01 AMD HAMMER 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 1 -> APIC 2 -> Node 1
SRAT: PXM 1 -> APIC 3 -> Node 1
SRAT: Node 0 PXM 0 0-a0000
SRAT: Node 0 PXM 0 100000-80000000
SRAT: Node 0 PXM 0 100000000-180000000
SRAT: Node 1 PXM 1 180000000-280000000
NUMA: Allocated memnodemap from 11000 - 16040
NUMA: Using 20 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000180000000
NODE_DATA [0000000000016040 - 000000000002c03f]
bootmap [000000000002d000 - 000000000005cfff] pages 30
(9 early reservations) ==> bootmem [0000000000 - 0180000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0001a549d8] TEXT DATA BSS ==> [0001000000 - 0001a549d8]
#3 [0037eac000 - 0037fef113] RAMDISK ==> [0037eac000 - 0037fef113]
#4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
#5 [0001a55000 - 0001a5510c] BRK ==> [0001a55000 - 0001a5510c]
#6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
#7 [000000a000 - 0000011000] PGTABLE ==> [000000a000 - 0000011000]
#8 [0000011000 - 0000016040] MEMNODEMAP ==> [0000011000 - 0000016040]
Bootmem setup node 1 0000000180000000-000000027ffff000
NODE_DATA [0000000180000000 - 0000000180015fff]
bootmap [0000000180016000 - 0000000180035fff] pages 20
(9 early reservations) ==> bootmem [0180000000 - 027ffff000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0001000000 - 0001a549d8] TEXT DATA BSS
#3 [0037eac000 - 0037fef113] RAMDISK
#4 [000009f400 - 0000100000] BIOS reserved
#5 [0001a55000 - 0001a5510c] BRK
#6 [0000008000 - 000000a000] PGTABLE
#7 [000000a000 - 0000011000] PGTABLE
#8 [0000011000 - 0000016040] MEMNODEMAP
found SMP MP-table at [ffff8800000f4f80] f4f80
[ffffea0000000000-ffffea00053fffff] PMD -> [ffff880001c00000-ffff8800053fffff] on node 0
[ffffea0005400000-ffffea0008bfffff] PMD -> [ffff880180200000-ffff8801839fffff] on node 1
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0027ffff
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x0007fe50
0: 0x00100000 -> 0x00180000
1: 0x00180000 -> 0x0027ffff
On node 0 totalpages: 1048047
DMA zone: 56 pages used for memmap
DMA zone: 113 pages reserved
DMA zone: 3830 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 505480 pages, LIFO batch:31
Normal zone: 7168 pages used for memmap
Normal zone: 517120 pages, LIFO batch:31
On node 1 totalpages: 1048575
Normal zone: 14336 pages used for memmap
Normal zone: 1034239 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x908
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xf7df0000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 17, address 0xf7df0000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfdef0000] gsi_base[38])
IOAPIC[1]: apic_id 9, version 17, address 0xfdef0000, GSI 38-61
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 62
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 000000007fe50000 - 000000007fe58000
PM: Registered nosave memory: 000000007fe58000 - 0000000080000000
PM: Registered nosave memory: 0000000080000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000
PM: Registered nosave memory: 00000000fee10000 - 00000000ffc00000
PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:2
PERCPU: Embedded 30 pages/cpu @ffff880005600000 s91224 r8192 d23464 u1048576
pcpu-alloc: s91224 r8192 d23464 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 2 [1] 1 3
Built 2 zonelists in Zone order, mobility grouping on. Total pages: 2060669
Policy zone: Normal
Kernel command line: ro root=/dev/cciss/c0d0p3 console=tty0 console=ttyS0,115200n8 netconsole=50000@139.185.50.77/eth0,50000@139.185.50.76/00:18:FE:34:1C:3D nmi_watchdog=2 selinux=0 debug ignore_loglevel initcall_debug print_fatal_signals=1 slub_debug=FPZ
PID hash table entries: 4096 (order: 3, 32768 bytes)
Initializing CPU#0
Checking aperture...
No AGP bridge found
Node 0: aperture @ fa6c000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 20000000
PM: Registered nosave memory: 0000000020000000 - 0000000024000000
Memory: 8193176k/10485756k available (4275k kernel code, 2099268k absent, 193312k reserved, 3924k data, 936k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=2
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:1024
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
allocated 83886080 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Fast TSC calibration using PIT
Detected 2611.921 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5223.84 BogoMIPS (lpj=2611921)
Security Framework initialized
SELinux: Disabled at boot.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0/0x0 -> Node 0
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
using C1E aware idle routine
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 26435 entries in 104 pages
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02
calling migration_init+0x0/0x5a @ 1
initcall migration_init+0x0/0x5a returned 0 after 0 usecs
calling spawn_ksoftirqd+0x0/0x59 @ 1
initcall spawn_ksoftirqd+0x0/0x59 returned 0 after 0 usecs
calling init_call_single_data+0x0/0x87 @ 1
initcall init_call_single_data+0x0/0x87 returned 0 after 0 usecs
calling spawn_softlockup_task+0x0/0x75 @ 1
initcall spawn_softlockup_task+0x0/0x75 returned 0 after 0 usecs
calling relay_init+0x0/0x14 @ 1
initcall relay_init+0x0/0x14 returned 0 after 0 usecs
calling tracer_alloc_buffers+0x0/0x1f6 @ 1
initcall tracer_alloc_buffers+0x0/0x1f6 returned 0 after 0 usecs
calling init_trace_printk+0x0/0x12 @ 1
initcall init_trace_printk+0x0/0x12 returned 0 after 0 usecs
calling trace_workqueue_early_init+0x0/0x108 @ 1
initcall trace_workqueue_early_init+0x0/0x108 returned 0 after 0 usecs
calling mce_amd_init+0x0/0x33 @ 1
initcall mce_amd_init+0x0/0x33 returned 0 after 0 usecs
Booting processor 1 APIC 0x2 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5223.82 BogoMIPS (lpj=2611910)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1/0x2 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU1: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02
Booting processor 2 APIC 0x1 ip 0x6000
Initializing CPU#2
Calibrating delay using timer specific routine.. 5223.82 BogoMIPS (lpj=2611910)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 2/0x1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU2: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02
Booting processor 3 APIC 0x3 ip 0x6000
Initializing CPU#3
Calibrating delay using timer specific routine.. 5223.83 BogoMIPS (lpj=2611916)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 3/0x3 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
CPU3: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02
Brought up 4 CPUs
Total of 4 processors activated (20895.31 BogoMIPS).
Testing NMI watchdog ... OK.
CPU0 attaching sched-domain:
domain 0: span 0,2 level MC
groups: 0 2
domain 1: span 0-3 level NODE
groups: 0,2 (cpu_power = 2048) 1,3 (cpu_power = 2048)
CPU1 attaching sched-domain:
domain 0: span 1,3 level MC
groups: 1 3
domain 1: span 0-3 level NODE
groups: 1,3 (cpu_power = 2048) 0,2 (cpu_power = 2048)
CPU2 attaching sched-domain:
domain 0: span 0,2 level MC
groups: 2 0
domain 1: span 0-3 level NODE
groups: 0,2 (cpu_power = 2048) 1,3 (cpu_power = 2048)
CPU3 attaching sched-domain:
domain 0: span 1,3 level MC
groups: 3 1
domain 1: span 0-3 level NODE
groups: 1,3 (cpu_power = 2048) 0,2 (cpu_power = 2048)
calling init_mmap_min_addr+0x0/0x26 @ 1
initcall init_mmap_min_addr+0x0/0x26 returned 0 after 0 usecs
calling init_cpufreq_transition_notifier_list+0x0/0x1b @ 1
initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 usecs
calling net_ns_init+0x0/0xc8 @ 1
initcall net_ns_init+0x0/0xc8 returned 0 after 0 usecs
calling e820_mark_nvs_memory+0x0/0x41 @ 1
initcall e820_mark_nvs_memory+0x0/0x41 returned 0 after 0 usecs
calling cpufreq_tsc+0x0/0x28 @ 1
initcall cpufreq_tsc+0x0/0x28 returned 0 after 0 usecs
calling pci_reboot_init+0x0/0x14 @ 1
initcall pci_reboot_init+0x0/0x14 returned 0 after 0 usecs
calling init_lapic_sysfs+0x0/0x2d @ 1
initcall init_lapic_sysfs+0x0/0x2d returned 0 after 0 usecs
calling init_smp_flush+0x0/0x26 @ 1
initcall init_smp_flush+0x0/0x26 returned 0 after 0 usecs
calling alloc_frozen_cpus+0x0/0xd @ 1
initcall alloc_frozen_cpus+0x0/0xd returned 0 after 0 usecs
calling sysctl_init+0x0/0x16 @ 1
initcall sysctl_init+0x0/0x16 returned 0 after 0 usecs
calling ksysfs_init+0x0/0xbb @ 1
initcall ksysfs_init+0x0/0xbb returned 0 after 0 usecs
calling async_init+0x0/0x61 @ 1
initcall async_init+0x0/0x61 returned 0 after 0 usecs
calling init_jiffies_clocksource+0x0/0x12 @ 1
initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 usecs
calling pm_init+0x0/0x34 @ 1
initcall pm_init+0x0/0x34 returned 0 after 0 usecs
calling pm_disk_init+0x0/0x19 @ 1
initcall pm_disk_init+0x0/0x19 returned 0 after 0 usecs
calling swsusp_header_init+0x0/0x31 @ 1
initcall swsusp_header_init+0x0/0x31 returned 0 after 0 usecs
calling init_zero_pfn+0x0/0x35 @ 1
initcall init_zero_pfn+0x0/0x35 returned 0 after 0 usecs
calling filelock_init+0x0/0x2e @ 1
initcall filelock_init+0x0/0x2e returned 0 after 0 usecs
calling init_misc_binfmt+0x0/0x41 @ 1
initcall init_misc_binfmt+0x0/0x41 returned 0 after 0 usecs
calling init_script_binfmt+0x0/0x14 @ 1
initcall init_script_binfmt+0x0/0x14 returned 0 after 0 usecs
calling init_elf_binfmt+0x0/0x14 @ 1
initcall init_elf_binfmt+0x0/0x14 returned 0 after 0 usecs
calling init_compat_elf_binfmt+0x0/0x14 @ 1
initcall init_compat_elf_binfmt+0x0/0x14 returned 0 after 0 usecs
calling debugfs_init+0x0/0x5a @ 1
initcall debugfs_init+0x0/0x5a returned 0 after 0 usecs
calling securityfs_init+0x0/0x51 @ 1
initcall securityfs_init+0x0/0x51 returned 0 after 0 usecs
calling random32_init+0x0/0xd1 @ 1
initcall random32_init+0x0/0xd1 returned 0 after 0 usecs
calling gnttab_init+0x0/0x16e @ 1
initcall gnttab_init+0x0/0x16e returned -19 after 0 usecs
calling regulator_init+0x0/0x2e @ 1
regulator: core version 0.5
initcall regulator_init+0x0/0x2e returned 0 after 976 usecs
calling early_resume_init+0x0/0x1a0 @ 1
Time: 10:10:50 Date: 12/01/09
initcall early_resume_init+0x0/0x1a0 returned 0 after 976 usecs
calling cpufreq_core_init+0x0/0x8c @ 1
initcall cpufreq_core_init+0x0/0x8c returned 0 after 0 usecs
calling cpuidle_init+0x0/0x40 @ 1
initcall cpuidle_init+0x0/0x40 returned 0 after 0 usecs
calling sock_init+0x0/0x5e @ 1
initcall sock_init+0x0/0x5e returned 0 after 0 usecs
calling net_inuse_init+0x0/0x26 @ 1
initcall net_inuse_init+0x0/0x26 returned 0 after 0 usecs
calling netpoll_init+0x0/0x31 @ 1
initcall netpoll_init+0x0/0x31 returned 0 after 0 usecs
calling netlink_proto_init+0x0/0x14c @ 1
NET: Registered protocol family 16
initcall netlink_proto_init+0x0/0x14c returned 0 after 976 usecs
calling bdi_class_init+0x0/0x41 @ 1
initcall bdi_class_init+0x0/0x41 returned 0 after 0 usecs
calling kobject_uevent_init+0x0/0x54 @ 1
initcall kobject_uevent_init+0x0/0x54 returned 0 after 0 usecs
calling pcibus_class_init+0x0/0x19 @ 1
initcall pcibus_class_init+0x0/0x19 returned 0 after 0 usecs
calling pci_driver_init+0x0/0x12 @ 1
initcall pci_driver_init+0x0/0x12 returned 0 after 0 usecs
calling backlight_class_init+0x0/0x5d @ 1
initcall backlight_class_init+0x0/0x5d returned 0 after 0 usecs
calling xenbus_probe_init+0x0/0x10a @ 1
initcall xenbus_probe_init+0x0/0x10a returned -19 after 0 usecs
calling tty_class_init+0x0/0x38 @ 1
initcall tty_class_init+0x0/0x38 returned 0 after 0 usecs
calling vtconsole_class_init+0x0/0xc3 @ 1
initcall vtconsole_class_init+0x0/0xc3 returned 0 after 0 usecs
calling register_node_type+0x0/0x6b @ 1
initcall register_node_type+0x0/0x6b returned 0 after 0 usecs
calling amd_postcore_init+0x0/0x885 @ 1
node 0 link 1: io port [1000, 3fff]
node 1 link 2: io port [4000, ffff]
TOM: 0000000080000000 aka 2048M
node 0 link 1: mmio [e8000000, fddfffff]
node 1 link 2: mmio [fde00000, fdffffff]
node 0 link 1: mmio [80000000, 83ffffff]
node 1 link 2: mmio [84000000, 8fffffff]
node 0 link 1: mmio [a0000, bffff]
TOM2: 0000000280000000 aka 10240M
bus: [00,3f] on node 0 link 1
bus: 00 index 0 io port: [0, 3fff]
bus: 00 index 1 mmio: [90000000, fddfffff]
bus: 00 index 2 mmio: [80000000, 83ffffff]
bus: 00 index 3 mmio: [a0000, bffff]
bus: 00 index 4 mmio: [fe000000, ffffffff]
bus: 00 index 5 mmio: [280000000, fcffffffff]
bus: [40,ff] on node 1 link 2
bus: 40 index 0 io port: [4000, ffff]
bus: 40 index 1 mmio: [fde00000, fdffffff]
bus: 40 index 2 mmio: [84000000, 8fffffff]
initcall amd_postcore_init+0x0/0x885 returned 0 after 23437 usecs
calling arch_kdebugfs_init+0x0/0x242 @ 1
initcall arch_kdebugfs_init+0x0/0x242 returned 0 after 0 usecs
calling mtrr_if_init+0x0/0x63 @ 1
initcall mtrr_if_init+0x0/0x63 returned 0 after 0 usecs
calling ffh_cstate_init+0x0/0x2a @ 1
initcall ffh_cstate_init+0x0/0x2a returned -1 after 0 usecs
initcall ffh_cstate_init+0x0/0x2a returned with error code -1
calling arch_init_ftrace_syscalls+0x0/0xfd @ 1
initcall arch_init_ftrace_syscalls+0x0/0xfd returned 0 after 976 usecs
calling acpi_pci_init+0x0/0x5c @ 1
ACPI: bus type pci registered
initcall acpi_pci_init+0x0/0x5c returned 0 after 976 usecs
calling setup_vcpu_hotplug_event+0x0/0x22 @ 1
initcall setup_vcpu_hotplug_event+0x0/0x22 returned -19 after 0 usecs
calling dmi_id_init+0x0/0x31a @ 1
initcall dmi_id_init+0x0/0x31a returned 0 after 976 usecs
calling dma_bus_init+0x0/0x3f @ 1
initcall dma_bus_init+0x0/0x3f returned 0 after 0 usecs
calling dma_channel_table_init+0x0/0xbf @ 1
initcall dma_channel_table_init+0x0/0xbf returned 0 after 0 usecs
calling pci_arch_init+0x0/0x57 @ 1
PCI: MCFG configuration 0: base 80000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
PCI: HP ProLiant BL685c G1 detected, enabling pci=bfsort.
initcall pci_arch_init+0x0/0x57 returned 0 after 3906 usecs
calling topology_init+0x0/0x86 @ 1
initcall topology_init+0x0/0x86 returned 0 after 0 usecs
calling mtrr_init_finialize+0x0/0x3d @ 1
initcall mtrr_init_finialize+0x0/0x3d returned 0 after 0 usecs
calling param_sysfs_init+0x0/0x216 @ 1
initcall param_sysfs_init+0x0/0x216 returned 0 after 5859 usecs
calling pm_sysrq_init+0x0/0x1e @ 1
initcall pm_sysrq_init+0x0/0x1e returned 0 after 0 usecs
calling audit_watch_init+0x0/0x2f @ 1
initcall audit_watch_init+0x0/0x2f returned 0 after 0 usecs
calling init_slow_work+0x0/0x37 @ 1
initcall init_slow_work+0x0/0x37 returned 0 after 0 usecs
calling default_bdi_init+0x0/0xb6 @ 1
initcall default_bdi_init+0x0/0xb6 returned 0 after 976 usecs
calling init_bio+0x0/0xd3 @ 1
bio: create slab <bio-0> at 0
initcall init_bio+0x0/0xd3 returned 0 after 976 usecs
calling fsnotify_init+0x0/0x12 @ 1
initcall fsnotify_init+0x0/0x12 returned 0 after 0 usecs
calling fsnotify_notification_init+0x0/0x68 @ 1
initcall fsnotify_notification_init+0x0/0x68 returned 0 after 976 usecs
calling cryptomgr_init+0x0/0x12 @ 1
initcall cryptomgr_init+0x0/0x12 returned 0 after 0 usecs
calling blk_settings_init+0x0/0x2a @ 1
initcall blk_settings_init+0x0/0x2a returned 0 after 0 usecs
calling blk_ioc_init+0x0/0x2a @ 1
initcall blk_ioc_init+0x0/0x2a returned 0 after 0 usecs
calling blk_softirq_init+0x0/0x6e @ 1
initcall blk_softirq_init+0x0/0x6e returned 0 after 0 usecs
calling blk_iopoll_setup+0x0/0x6e @ 1
initcall blk_iopoll_setup+0x0/0x6e returned 0 after 0 usecs
calling genhd_device_init+0x0/0x66 @ 1
initcall genhd_device_init+0x0/0x66 returned 0 after 0 usecs
calling blk_dev_integrity_init+0x0/0x2a @ 1
initcall blk_dev_integrity_init+0x0/0x2a returned 0 after 0 usecs
calling pci_slot_init+0x0/0x4a @ 1
initcall pci_slot_init+0x0/0x4a returned 0 after 0 usecs
calling fbmem_init+0x0/0x98 @ 1
initcall fbmem_init+0x0/0x98 returned 0 after 0 usecs
calling acpi_init+0x0/0x262 @ 1
ACPI: EC: Look up EC in DSDT
ACPI: SSDT 000000007fe58000 004F0 (v02 HP PNOWSSDT 00000002 HP 00000001)
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base 80000000 segment 0 buses 0 - 255
PCI: MCFG area at 80000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at 80000000 - 8fffffff
initcall acpi_init+0x0/0x262 returned 0 after 207031 usecs
calling dock_init+0x0/0x8d @ 1
ACPI: No dock devices found.
initcall dock_init+0x0/0x8d returned 0 after 13671 usecs
calling acpi_pci_root_init+0x0/0x28 @ 1
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 32bit mmio: [0xf7de0000-0xf7de0fff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10 32bit mmio: [0xf7dd0000-0xf7dd00ff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0d.0: PME# disabled
pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0e.0: PME# disabled
PCI: peer root bus 00 res updated from pci conf
pci 0000:01:03.0: reg 10 32bit mmio pref: [0xe8000000-0xefffffff]
pci 0000:01:03.0: reg 14 io port: [0x1000-0x10ff]
pci 0000:01:03.0: reg 18 32bit mmio: [0xf7ff0000-0xf7ffffff]
pci 0000:01:03.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
pci 0000:01:03.0: supports D1 D2
pci 0000:01:04.0: reg 10 io port: [0x2800-0x28ff]
pci 0000:01:04.0: reg 14 32bit mmio: [0xf7fe0000-0xf7fe01ff]
pci 0000:01:04.0: PME# supported from D0 D3hot D3cold
pci 0000:01:04.0: PME# disabled
pci 0000:01:04.2: reg 10 io port: [0x1400-0x14ff]
pci 0000:01:04.2: reg 14 32bit mmio: [0xf7fd0000-0xf7fd07ff]
pci 0000:01:04.2: reg 18 32bit mmio: [0xf7fc0000-0xf7fc3fff]
pci 0000:01:04.2: reg 1c 32bit mmio: [0xf7f00000-0xf7f7ffff]
pci 0000:01:04.2: reg 30 32bit mmio pref: [0x000000-0x00ffff]
pci 0000:01:04.2: PME# supported from D0 D3hot D3cold
pci 0000:01:04.2: PME# disabled
pci 0000:01:04.4: reg 20 io port: [0x1800-0x181f]
pci 0000:01:04.4: PME# supported from D0 D3hot D3cold
pci 0000:01:04.4: PME# disabled
pci 0000:01:04.6: reg 10 32bit mmio: [0xf7ef0000-0xf7ef00ff]
pci 0000:01:04.6: PME# supported from D0 D3hot D3cold
pci 0000:01:04.6: PME# disabled
pci 0000:00:09.0: transparent bridge
pci 0000:00:09.0: bridge io port: [0x1000-0x2fff]
pci 0000:00:09.0: bridge 32bit mmio: [0xf7e00000-0xf7ffffff]
pci 0000:00:09.0: bridge 32bit mmio pref: [0xe8000000-0xefffffff]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:0b.0: bridge 32bit mmio: [0xf8000000-0xf9ffffff]
pci 0000:03:00.0: reg 10 64bit mmio: [0xf8000000-0xf9ffffff]
pci 0000:03:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:02:00.0: bridge 32bit mmio: [0xf8000000-0xf9ffffff]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:0c.0: bridge 32bit mmio: [0xfa000000-0xfbffffff]
pci 0000:05:00.0: reg 10 64bit mmio: [0xfa000000-0xfbffffff]
pci 0000:05:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
pci 0000:05:00.0: PME# supported from D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:04:00.0: bridge 32bit mmio: [0xfa000000-0xfbffffff]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:0d.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff]
pci 0000:07:04.0: reg 10 64bit mmio: [0xfdcf0000-0xfdcfffff]
pci 0000:07:04.0: reg 18 64bit mmio: [0xfdce0000-0xfdceffff]
pci 0000:07:04.0: PME# supported from D3hot D3cold
pci 0000:07:04.0: PME# disabled
pci 0000:07:04.1: reg 10 64bit mmio: [0xfdcd0000-0xfdcdffff]
pci 0000:07:04.1: reg 18 64bit mmio: [0xfdcc0000-0xfdccffff]
pci 0000:07:04.1: PME# supported from D3hot D3cold
pci 0000:07:04.1: PME# disabled
pci 0000:06:00.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff]
pci 0000:08:00.0: reg 10 64bit mmio: [0xfddf0000-0xfddf0fff]
pci 0000:08:00.0: reg 18 64bit mmio: [0xfdde0000-0xfdde00ff]
pci 0000:08:00.0: reg 20 io port: [0x3000-0x30ff]
pci 0000:08:00.0: reg 30 32bit mmio pref: [0x000000-0x03ffff]
pci 0000:08:00.1: reg 10 64bit mmio: [0xfddd0000-0xfddd0fff]
pci 0000:08:00.1: reg 18 64bit mmio: [0xfddc0000-0xfddc00ff]
pci 0000:08:00.1: reg 20 io port: [0x3400-0x34ff]
pci 0000:08:00.1: reg 30 32bit mmio pref: [0x000000-0x03ffff]
pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:0e.0: bridge io port: [0x3000-0x3fff]
pci 0000:00:0e.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE1.NB01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE2.NC1B._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE3.NC2B._PRT]
ACPI: PCI Root Bridge [PCI1] (0000:40)
pci 0000:40:01.0: reg 14 32bit mmio: [0xfdef0000-0xfdef0fff]
pci 0000:40:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:40:0c.0: PME# disabled
pci 0000:40:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:40:0d.0: PME# disabled
pci 0000:40:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:40:0e.0: PME# disabled
PCI: peer root bus 40 res updated from pci conf
pci 0000:41:00.0: PME# supported from D0 D3hot D3cold
pci 0000:41:00.0: PME# disabled
pci 0000:41:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:40:0c.0: bridge io port: [0x4000-0x4fff]
pci 0000:40:0c.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff]
pci 0000:42:08.0: reg 10 64bit mmio: [0xfdf80000-0xfdffffff]
pci 0000:42:08.0: reg 18 io port: [0x4000-0x40ff]
pci 0000:42:08.0: reg 1c 32bit mmio: [0xfdf70000-0xfdf77fff]
pci 0000:42:08.0: reg 30 32bit mmio pref: [0x000000-0x003fff]
pci 0000:42:08.0: supports D1
pci 0000:41:00.0: bridge io port: [0x4000-0x4fff]
pci 0000:41:00.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE2.SASB._PRT]
initcall acpi_pci_root_init+0x0/0x28 returned 0 after 2736330 usecs
calling acpi_pci_link_init+0x0/0x43 @ 1
ACPI: PCI Interrupt Link [LNKW] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LNKX] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [LNKY] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [LNKZ] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [LNU0] (IRQs 22) *5
ACPI: PCI Interrupt Link [LNU2] (IRQs 23) *7
ACPI: PCI Interrupt Link [LNKA] (IRQs 54) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 55) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 56) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 57) *0, disabled.
initcall acpi_pci_link_init+0x0/0x43 returned 0 after 203125 usecs
calling pnp_init+0x0/0x12 @ 1
initcall pnp_init+0x0/0x12 returned 0 after 0 usecs
calling setup_shutdown_event+0x0/0x14 @ 1
initcall setup_shutdown_event+0x0/0x14 returned 0 after 0 usecs
calling balloon_init+0x0/0x1c3 @ 1
initcall balloon_init+0x0/0x1c3 returned -19 after 0 usecs
calling misc_init+0x0/0xb8 @ 1
initcall misc_init+0x0/0xb8 returned 0 after 0 usecs
calling vga_arb_device_init+0x0/0x78 @ 1
vgaarb: device added: PCI:0000:01:03.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
initcall vga_arb_device_init+0x0/0x78 returned 0 after 44921 usecs
calling cn_init+0x0/0xf3 @ 1
initcall cn_init+0x0/0xf3 returned 0 after 0 usecs
calling init_scsi+0x0/0x91 @ 1
SCSI subsystem initialized
initcall init_scsi+0x0/0x91 returned 0 after 13671 usecs
calling ata_init+0x0/0x33f @ 1
libata version 3.00 loaded.
initcall ata_init+0x0/0x33f returned 0 after 13671 usecs
calling phy_init+0x0/0x31 @ 1
initcall phy_init+0x0/0x31 returned 0 after 0 usecs
calling init_pcmcia_cs+0x0/0x25 @ 1
initcall init_pcmcia_cs+0x0/0x25 returned 0 after 0 usecs
calling usb_init+0x0/0x1a8 @ 1
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
initcall usb_init+0x0/0x1a8 returned 0 after 42968 usecs
calling serio_init+0x0/0x89 @ 1
initcall serio_init+0x0/0x89 returned 0 after 0 usecs
calling input_init+0x0/0x133 @ 1
initcall input_init+0x0/0x133 returned 0 after 0 usecs
calling rtc_init+0x0/0x71 @ 1
initcall rtc_init+0x0/0x71 returned 0 after 0 usecs
calling power_supply_class_init+0x0/0x38 @ 1
initcall power_supply_class_init+0x0/0x38 returned 0 after 0 usecs
calling hwmon_init+0x0/0x10d @ 1
initcall hwmon_init+0x0/0x10d returned 0 after 0 usecs
calling thermal_init+0x0/0x40 @ 1
initcall thermal_init+0x0/0x40 returned 0 after 0 usecs
calling md_init+0x0/0xd0 @ 1
initcall md_init+0x0/0xd0 returned 0 after 0 usecs
calling leds_init+0x0/0x40 @ 1
initcall leds_init+0x0/0x40 returned 0 after 0 usecs
calling pci_subsys_init+0x0/0x125 @ 1
PCI: Using ACPI for IRQ routing
initcall pci_subsys_init+0x0/0x125 returned 0 after 15625 usecs
calling proto_init+0x0/0x12 @ 1
initcall proto_init+0x0/0x12 returned 0 after 0 usecs
calling net_dev_init+0x0/0x177 @ 1
initcall net_dev_init+0x0/0x177 returned 0 after 0 usecs
calling neigh_init+0x0/0x71 @ 1
initcall neigh_init+0x0/0x71 returned 0 after 0 usecs
calling fib_rules_init+0x0/0xa6 @ 1
initcall fib_rules_init+0x0/0xa6 returned 0 after 0 usecs
calling pktsched_init+0x0/0xd0 @ 1
initcall pktsched_init+0x0/0xd0 returned 0 after 0 usecs
calling tc_filter_init+0x0/0x4c @ 1
initcall tc_filter_init+0x0/0x4c returned 0 after 0 usecs
calling tc_action_init+0x0/0x4c @ 1
initcall tc_action_init+0x0/0x4c returned 0 after 0 usecs
calling genl_init+0x0/0x8f @ 1
initcall genl_init+0x0/0x8f returned 0 after 0 usecs
calling cipso_v4_init+0x0/0x67 @ 1
initcall cipso_v4_init+0x0/0x67 returned 0 after 0 usecs
calling wireless_nlevent_init+0x0/0x12 @ 1
initcall wireless_nlevent_init+0x0/0x12 returned 0 after 0 usecs
calling netlbl_init+0x0/0x83 @ 1
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
initcall netlbl_init+0x0/0x83 returned 0 after 72265 usecs
calling sysctl_init+0x0/0x49 @ 1
initcall sysctl_init+0x0/0x49 returned 0 after 0 usecs
calling xen_mc_debugfs+0x0/0x118 @ 1
initcall xen_mc_debugfs+0x0/0x118 returned 0 after 0 usecs
calling xen_mmu_debugfs+0x0/0x2be @ 1
initcall xen_mmu_debugfs+0x0/0x2be returned 0 after 0 usecs
calling print_all_ICs+0x0/0x500 @ 1
initcall print_all_ICs+0x0/0x500 returned 0 after 0 usecs
calling hpet_late_init+0x0/0x1bc @ 1
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
initcall hpet_late_init+0x0/0x1bc returned 0 after 13671 usecs
calling clocksource_done_booting+0x0/0x36 @ 1
Switching to clocksource hpet
initcall clocksource_done_booting+0x0/0x36 returned 0 after 15809 usecs
calling ftrace_init_debugfs+0x0/0x214 @ 1
initcall ftrace_init_debugfs+0x0/0x214 returned 0 after 101 usecs
calling rb_init_debugfs+0x0/0x2f @ 1
initcall rb_init_debugfs+0x0/0x2f returned 0 after 4 usecs
calling tracer_init_debugfs+0x0/0x33e @ 1
initcall tracer_init_debugfs+0x0/0x33e returned 0 after 189 usecs
calling init_trace_printk_function_export+0x0/0x2f @ 1
initcall init_trace_printk_function_export+0x0/0x2f returned 0 after 4 usecs
calling stat_workqueue_init+0x0/0x2d @ 1
initcall stat_workqueue_init+0x0/0x2d returned 0 after 5 usecs
calling event_trace_init+0x0/0x1e2 @ 1
initcall event_trace_init+0x0/0x1e2 returned 0 after 21274 usecs
calling init_pipe_fs+0x0/0x4c @ 1
initcall init_pipe_fs+0x0/0x4c returned 0 after 51 usecs
calling eventpoll_init+0x0/0xc3 @ 1
initcall eventpoll_init+0x0/0xc3 returned 0 after 72 usecs
calling anon_inode_init+0x0/0x123 @ 1
initcall anon_inode_init+0x0/0x123 returned 0 after 16 usecs
calling blk_scsi_ioctl_init+0x0/0x289 @ 1
initcall blk_scsi_ioctl_init+0x0/0x289 returned 0 after 1 usecs
calling acpi_event_init+0x0/0x80 @ 1
initcall acpi_event_init+0x0/0x80 returned 0 after 84 usecs
calling pnpacpi_init+0x0/0x8c @ 1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
initcall pnpacpi_init+0x0/0x8c returned 0 after 75210 usecs
calling pnp_system_init+0x0/0x12 @ 1
system 00:01: ioport range 0x408-0x40f has been reserved
system 00:01: ioport range 0x4d0-0x4d1 has been reserved
system 00:01: ioport range 0x700-0x73f has been reserved
system 00:01: ioport range 0x800-0x8fe has been reserved
system 00:01: ioport range 0x900-0x9fe has been reserved
system 00:01: ioport range 0x9ff-0x9ff has been reserved
system 00:01: ioport range 0xa00-0xafe has been reserved
system 00:01: ioport range 0xaff-0xaff has been reserved
system 00:01: ioport range 0xb00-0xbfe has been reserved
system 00:01: ioport range 0xbff-0xbff has been reserved
system 00:01: ioport range 0xc80-0xc83 has been reserved
system 00:01: ioport range 0xcd4-0xcd7 has been reserved
system 00:01: ioport range 0xf50-0xf58 has been reserved
system 00:01: ioport range 0xca0-0xca1 has been reserved
system 00:01: ioport range 0xca4-0xca5 has been reserved
system 00:01: ioport range 0xcf9-0xcf9 could not be reserved
system 00:01: ioport range 0x3f8-0x3ff has been reserved
system 00:01: iomem range 0x80000000-0x8fffffff could not be reserved
system 00:01: iomem range 0xf7df0000-0xf7df0fff could not be reserved
system 00:01: iomem range 0xfdef0000-0xfdef0fff could not be reserved
initcall pnp_system_init+0x0/0x12 returned 0 after 491870 usecs
calling chr_dev_init+0x0/0xc7 @ 1
initcall chr_dev_init+0x0/0xc7 returned 0 after 416 usecs
calling firmware_class_init+0x0/0x79 @ 1
initcall firmware_class_init+0x0/0x79 returned 0 after 32 usecs
calling init_pcmcia_bus+0x0/0x74 @ 1
initcall init_pcmcia_bus+0x0/0x74 returned 0 after 67 usecs
calling cpufreq_gov_performance_init+0x0/0x12 @ 1
initcall cpufreq_gov_performance_init+0x0/0x12 returned 0 after 1 usecs
calling cpufreq_gov_userspace_init+0x0/0x12 @ 1
initcall cpufreq_gov_userspace_init+0x0/0x12 returned 0 after 0 usecs
calling init_acpi_pm_clocksource+0x0/0xef @ 1
initcall init_acpi_pm_clocksource+0x0/0xef returned 0 after 4426 usecs
calling pcibios_assign_resources+0x0/0x76 @ 1
pci 0000:00:09.0: PCI bridge, secondary bus 0000:01
pci 0000:00:09.0: IO window: 0x1000-0x2fff
pci 0000:00:09.0: MEM window: 0xf7e00000-0xf7ffffff
pci 0000:00:09.0: PREFETCH window: 0xe8000000-0xefffffff
pci 0000:02:00.0: PCI bridge, secondary bus 0000:03
pci 0000:02:00.0: IO window: disabled
pci 0000:02:00.0: MEM window: 0xf8000000-0xf9ffffff
pci 0000:02:00.0: PREFETCH window: 0x90000000-0x900fffff
pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02
pci 0000:00:0b.0: IO window: disabled
pci 0000:00:0b.0: MEM window: 0xf8000000-0xf9ffffff
pci 0000:00:0b.0: PREFETCH window: 0x90000000-0x900fffff
pci 0000:04:00.0: PCI bridge, secondary bus 0000:05
pci 0000:04:00.0: IO window: disabled
pci 0000:04:00.0: MEM window: 0xfa000000-0xfbffffff
pci 0000:04:00.0: PREFETCH window: 0x90100000-0x901fffff
pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04
pci 0000:00:0c.0: IO window: disabled
pci 0000:00:0c.0: MEM window: 0xfa000000-0xfbffffff
pci 0000:00:0c.0: PREFETCH window: 0x90100000-0x901fffff
pci 0000:06:00.0: PCI bridge, secondary bus 0000:07
pci 0000:06:00.0: IO window: disabled
pci 0000:06:00.0: MEM window: 0xfdc00000-0xfdcfffff
pci 0000:06:00.0: PREFETCH window: disabled
pci 0000:00:0d.0: PCI bridge, secondary bus 0000:06
pci 0000:00:0d.0: IO window: disabled
pci 0000:00:0d.0: MEM window: 0xfdc00000-0xfdcfffff
pci 0000:00:0d.0: PREFETCH window: disabled
pci 0000:00:0e.0: PCI bridge, secondary bus 0000:08
pci 0000:00:0e.0: IO window: 0x3000-0x3fff
pci 0000:00:0e.0: MEM window: 0xfdd00000-0xfddfffff
pci 0000:00:0e.0: PREFETCH window: 0x90200000-0x902fffff
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0b.0: setting latency timer to 64
pci 0000:02:00.0: setting latency timer to 64
pci 0000:00:0c.0: setting latency timer to 64
pci 0000:04:00.0: setting latency timer to 64
pci 0000:00:0d.0: setting latency timer to 64
pci 0000:06:00.0: setting latency timer to 64
pci 0000:00:0e.0: setting latency timer to 64
pci 0000:42:04.0: PCI bridge, secondary bus 0000:43
pci 0000:42:04.0: IO window: disabled
pci 0000:42:04.0: MEM window: disabled
pci 0000:42:04.0: PREFETCH window: disabled
pci 0000:41:00.0: PCI bridge, secondary bus 0000:42
pci 0000:41:00.0: IO window: 0x4000-0x4fff
pci 0000:41:00.0: MEM window: 0xfdf00000-0xfdffffff
pci 0000:41:00.0: PREFETCH window: 0x84000000-0x840fffff
pci 0000:40:0c.0: PCI bridge, secondary bus 0000:41
pci 0000:40:0c.0: IO window: 0x4000-0x4fff
pci 0000:40:0c.0: MEM window: 0xfdf00000-0xfdffffff
pci 0000:40:0c.0: PREFETCH window: 0x84000000-0x840fffff
pci 0000:40:0d.0: PCI bridge, secondary bus 0000:44
pci 0000:40:0d.0: IO window: disabled
pci 0000:40:0d.0: MEM window: disabled
pci 0000:40:0d.0: PREFETCH window: disabled
pci 0000:40:0e.0: PCI bridge, secondary bus 0000:47
pci 0000:40:0e.0: IO window: disabled
pci 0000:40:0e.0: MEM window: disabled
pci 0000:40:0e.0: PREFETCH window: disabled
pci 0000:40:0c.0: setting latency timer to 64
pci 0000:41:00.0: setting latency timer to 64
pci 0000:40:0d.0: setting latency timer to 64
pci 0000:40:0e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0x3fff]
pci_bus 0000:00: resource 1 mem: [0x90000000-0xfddfffff]
pci_bus 0000:00: resource 2 mem: [0x80000000-0x83ffffff]
pci_bus 0000:00: resource 3 mem: [0x0a0000-0x0bffff]
pci_bus 0000:00: resource 4 mem: [0xfe000000-0xffffffff]
pci_bus 0000:00: resource 5 mem: [0x280000000-0xfcffffffff]
pci_bus 0000:01: resource 0 io: [0x1000-0x2fff]
pci_bus 0000:01: resource 1 mem: [0xf7e00000-0xf7ffffff]
pci_bus 0000:01: resource 2 pref mem [0xe8000000-0xefffffff]
pci_bus 0000:01: resource 3 io: [0x00-0x3fff]
pci_bus 0000:01: resource 4 mem: [0x90000000-0xfddfffff]
pci_bus 0000:01: resource 5 mem: [0x80000000-0x83ffffff]
pci_bus 0000:01: resource 6 mem: [0x0a0000-0x0bffff]
pci_bus 0000:01: resource 7 mem: [0xfe000000-0xffffffff]
pci_bus 0000:01: resource 8 mem: [0x280000000-0xfcffffffff]
pci_bus 0000:02: resource 1 mem: [0xf8000000-0xf9ffffff]
pci_bus 0000:02: resource 2 pref mem [0x90000000-0x900fffff]
pci_bus 0000:03: resource 1 mem: [0xf8000000-0xf9ffffff]
pci_bus 0000:03: resource 2 pref mem [0x90000000-0x900fffff]
pci_bus 0000:04: resource 1 mem: [0xfa000000-0xfbffffff]
pci_bus 0000:04: resource 2 pref mem [0x90100000-0x901fffff]
pci_bus 0000:05: resource 1 mem: [0xfa000000-0xfbffffff]
pci_bus 0000:05: resource 2 pref mem [0x90100000-0x901fffff]
pci_bus 0000:06: resource 1 mem: [0xfdc00000-0xfdcfffff]
pci_bus 0000:07: resource 1 mem: [0xfdc00000-0xfdcfffff]
pci_bus 0000:08: resource 0 io: [0x3000-0x3fff]
pci_bus 0000:08: resource 1 mem: [0xfdd00000-0xfddfffff]
pci_bus 0000:08: resource 2 pref mem [0x90200000-0x902fffff]
pci_bus 0000:40: resource 0 io: [0x4000-0xffff]
pci_bus 0000:40: resource 1 mem: [0xfde00000-0xfdffffff]
pci_bus 0000:40: resource 2 mem: [0x84000000-0x8fffffff]
pci_bus 0000:41: resource 0 io: [0x4000-0x4fff]
pci_bus 0000:41: resource 1 mem: [0xfdf00000-0xfdffffff]
pci_bus 0000:41: resource 2 pref mem [0x84000000-0x840fffff]
pci_bus 0000:42: resource 0 io: [0x4000-0x4fff]
pci_bus 0000:42: resource 1 mem: [0xfdf00000-0xfdffffff]
pci_bus 0000:42: resource 2 pref mem [0x84000000-0x840fffff]
initcall pcibios_assign_resources+0x0/0x76 returned 0 after 2290743 usecs
calling sysctl_core_init+0x0/0x38 @ 1
initcall sysctl_core_init+0x0/0x38 returned 0 after 11 usecs
calling inet_init+0x0/0x204 @ 1
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
initcall inet_init+0x0/0x204 returned 0 after 156534 usecs
calling af_unix_init+0x0/0x55 @ 1
NET: Registered protocol family 1
initcall af_unix_init+0x0/0x55 returned 0 after 17217 usecs
calling pci_apply_final_quirks+0x0/0x35 @ 1
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0b.0: Found disabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0c.0: Found enabled HT MSI Mapping
pci 0000:00:0d.0: Found enabled HT MSI Mapping
pci 0000:00:0e.0: Found enabled HT MSI Mapping
pci 0000:01:03.0: Boot video device
pci 0000:01:04.4: HCRESET not completed yet!
pci 0000:40:0c.0: Found enabled HT MSI Mapping
pci 0000:40:0d.0: Found enabled HT MSI Mapping
pci 0000:40:0e.0: Found enabled HT MSI Mapping
initcall pci_apply_final_quirks+0x0/0x35 returned 0 after 239730 usecs
calling populate_rootfs+0x0/0x23a @ 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 1292k freed
initcall populate_rootfs+0x0/0x23a returned 0 after 56422 usecs
calling pci_iommu_init+0x0/0x21 @ 1
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 20000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
initcall pci_iommu_init+0x0/0x21 returned 0 after 76040 usecs
calling calgary_fixup_tce_spaces+0x0/0xee @ 1
initcall calgary_fixup_tce_spaces+0x0/0xee returned -19 after 0 usecs
calling i8259A_init_sysfs+0x0/0x22 @ 1
initcall i8259A_init_sysfs+0x0/0x22 returned 0 after 85 usecs
calling vsyscall_init+0x0/0x6c @ 1
initcall vsyscall_init+0x0/0x6c returned 0 after 18 usecs
calling sbf_init+0x0/0xd7 @ 1
initcall sbf_init+0x0/0xd7 returned 0 after 0 usecs
calling i8237A_init_sysfs+0x0/0x22 @ 1
initcall i8237A_init_sysfs+0x0/0x22 returned 0 after 56 usecs
calling add_rtc_cmos+0x0/0xa4 @ 1
platform rtc_cmos: registered platform RTC device (no PNP device found)
initcall add_rtc_cmos+0x0/0xa4 returned 0 after 36163 usecs
calling cache_sysfs_init+0x0/0x5e @ 1
initcall cache_sysfs_init+0x0/0x5e returned 0 after 677 usecs
calling mce_init_device+0x0/0xf8 @ 1
initcall mce_init_device+0x0/0xf8 returned 0 after 242 usecs
calling threshold_init_device+0x0/0x44 @ 1
initcall threshold_init_device+0x0/0x44 returned 0 after 1 usecs
calling thermal_throttle_init_device+0x0/0x89 @ 1
initcall thermal_throttle_init_device+0x0/0x89 returned 0 after 0 usecs
calling msr_init+0x0/0x104 @ 1
initcall msr_init+0x0/0x104 returned 0 after 212 usecs
calling cpuid_init+0x0/0x104 @ 1
initcall cpuid_init+0x0/0x104 returned 0 after 213 usecs
calling ioapic_init_sysfs+0x0/0x99 @ 1
initcall ioapic_init_sysfs+0x0/0x99 returned 0 after 96 usecs
calling add_pcspkr+0x0/0x28 @ 1
initcall add_pcspkr+0x0/0x28 returned 0 after 42 usecs
calling audit_classes_init+0x0/0xaf @ 1
initcall audit_classes_init+0x0/0xaf returned 0 after 11 usecs
calling init_vdso_vars+0x0/0x19d @ 1
initcall init_vdso_vars+0x0/0x19d returned 0 after 13 usecs
calling ia32_binfmt_init+0x0/0x14 @ 1
initcall ia32_binfmt_init+0x0/0x14 returned 0 after 2 usecs
calling sysenter_setup+0x0/0x2cc @ 1
initcall sysenter_setup+0x0/0x2cc returned 0 after 5 usecs
calling init_sched_debug_procfs+0x0/0x29 @ 1
initcall init_sched_debug_procfs+0x0/0x29 returned 0 after 10 usecs
calling proc_schedstat_init+0x0/0x1f @ 1
initcall proc_schedstat_init+0x0/0x1f returned 0 after 5 usecs
calling proc_execdomains_init+0x0/0x22 @ 1
initcall proc_execdomains_init+0x0/0x22 returned 0 after 6 usecs
calling ioresources_init+0x0/0x36 @ 1
initcall ioresources_init+0x0/0x36 returned 0 after 11 usecs
calling uid_cache_init+0x0/0x70 @ 1
initcall uid_cache_init+0x0/0x70 returned 0 after 42 usecs
calling init_posix_timers+0x0/0x1b5 @ 1
initcall init_posix_timers+0x0/0x1b5 returned 0 after 26 usecs
calling init_posix_cpu_timers+0x0/0x101 @ 1
initcall init_posix_cpu_timers+0x0/0x101 returned 0 after 1 usecs
calling nsproxy_cache_init+0x0/0x2d @ 1
initcall nsproxy_cache_init+0x0/0x2d returned 0 after 25 usecs
calling create_proc_profile+0x0/0x23b @ 1
initcall create_proc_profile+0x0/0x23b returned 0 after 0 usecs
calling timekeeping_init_device+0x0/0x22 @ 1
initcall timekeeping_init_device+0x0/0x22 returned 0 after 57 usecs
calling init_clocksource_sysfs+0x0/0x50 @ 1
initcall init_clocksource_sysfs+0x0/0x50 returned 0 after 58 usecs
calling init_timer_list_procfs+0x0/0x2c @ 1
initcall init_timer_list_procfs+0x0/0x2c returned 0 after 6 usecs
calling init_tstats_procfs+0x0/0x2c @ 1
initcall init_tstats_procfs+0x0/0x2c returned 0 after 6 usecs
calling futex_init+0x0/0x63 @ 1
initcall futex_init+0x0/0x63 returned 0 after 9 usecs
calling proc_dma_init+0x0/0x22 @ 1
initcall proc_dma_init+0x0/0x22 returned 0 after 5 usecs
calling proc_modules_init+0x0/0x22 @ 1
initcall proc_modules_init+0x0/0x22 returned 0 after 5 usecs
calling kallsyms_init+0x0/0x25 @ 1
initcall kallsyms_init+0x0/0x25 returned 0 after 12 usecs
calling snapshot_device_init+0x0/0x12 @ 1
initcall snapshot_device_init+0x0/0x12 returned 0 after 47 usecs
calling crash_save_vmcoreinfo_init+0x0/0x46d @ 1
initcall crash_save_vmcoreinfo_init+0x0/0x46d returned 0 after 22 usecs
calling crash_notes_memory_init+0x0/0x36 @ 1
initcall crash_notes_memory_init+0x0/0x36 returned 0 after 6 usecs
calling pid_namespaces_init+0x0/0x2d @ 1
initcall pid_namespaces_init+0x0/0x2d returned 0 after 38 usecs
calling audit_init+0x0/0x133 @ 1
audit: initializing netlink socket (disabled)
type=2000 audit(1259662259.488:1): initialized
initcall audit_init+0x0/0x133 returned 0 after 34190 usecs
calling audit_tree_init+0x0/0x49 @ 1
initcall audit_tree_init+0x0/0x49 returned 0 after 2 usecs
calling init_kprobes+0x0/0x167 @ 1
initcall init_kprobes+0x0/0x167 returned 0 after 7160 usecs
calling hung_task_init+0x0/0x53 @ 1
initcall hung_task_init+0x0/0x53 returned 0 after 57 usecs
calling utsname_sysctl_init+0x0/0x14 @ 1
initcall utsname_sysctl_init+0x0/0x14 returned 0 after 3 usecs
calling init_tracepoints+0x0/0x17 @ 1
initcall init_tracepoints+0x0/0x17 returned 0 after 0 usecs
calling init_lstats_procfs+0x0/0x25 @ 1
initcall init_lstats_procfs+0x0/0x25 returned 0 after 9 usecs
calling ftrace_mod_cmd_init+0x0/0x12 @ 1
initcall ftrace_mod_cmd_init+0x0/0x12 returned 0 after 1 usecs
calling init_events+0x0/0x62 @ 1
initcall init_events+0x0/0x62 returned 0 after 5 usecs
calling init_sched_switch_trace+0x0/0x12 @ 1
initcall init_sched_switch_trace+0x0/0x12 returned 0 after 1 usecs
calling init_stack_trace+0x0/0x12 @ 1
initcall init_stack_trace+0x0/0x12 returned 0 after 0 usecs
calling init_function_trace+0x0/0x3e @ 1
initcall init_function_trace+0x0/0x3e returned 0 after 1 usecs
calling init_wakeup_tracer+0x0/0x22 @ 1
initcall init_wakeup_tracer+0x0/0x22 returned 0 after 1 usecs
calling stack_trace_init+0x0/0x6b @ 1
initcall stack_trace_init+0x0/0x6b returned 0 after 19 usecs
calling init_graph_trace+0x0/0x32 @ 1
initcall init_graph_trace+0x0/0x32 returned 0 after 1 usecs
calling init_kmem_tracer+0x0/0x56 @ 1
initcall init_kmem_tracer+0x0/0x56 returned 0 after 2 usecs
calling init_blk_tracer+0x0/0x57 @ 1
initcall init_blk_tracer+0x0/0x57 returned 0 after 2 usecs
calling perf_event_sysfs_init+0x0/0x19 @ 1
initcall perf_event_sysfs_init+0x0/0x19 returned 0 after 7 usecs
calling init_per_zone_wmark_min+0x0/0x70 @ 1
initcall init_per_zone_wmark_min+0x0/0x70 returned 0 after 513 usecs
calling kswapd_init+0x0/0x4d @ 1
initcall kswapd_init+0x0/0x4d returned 0 after 96 usecs
calling setup_vmstat+0x0/0xae @ 1
initcall setup_vmstat+0x0/0xae returned 0 after 33 usecs
calling mm_sysfs_init+0x0/0x29 @ 1
initcall mm_sysfs_init+0x0/0x29 returned 0 after 8 usecs
calling proc_vmalloc_init+0x0/0x25 @ 1
initcall proc_vmalloc_init+0x0/0x25 returned 0 after 6 usecs
calling procswaps_init+0x0/0x22 @ 1
initcall procswaps_init+0x0/0x22 returned 0 after 6 usecs
calling hugetlb_init+0x0/0x31a @ 1
HugeTLB registered 2 MB page size, pre-allocated 0 pages
initcall hugetlb_init+0x0/0x31a returned 0 after 27287 usecs
calling ksm_init+0x0/0x16f @ 1
initcall ksm_init+0x0/0x16f returned 0 after 162 usecs
calling slab_proc_init+0x0/0x25 @ 1
initcall slab_proc_init+0x0/0x25 returned 0 after 7 usecs
calling slab_sysfs_init+0x0/0xf0 @ 1
initcall slab_sysfs_init+0x0/0xf0 returned 0 after 6279 usecs
calling fasync_init+0x0/0x2a @ 1
initcall fasync_init+0x0/0x2a returned 0 after 97 usecs
calling proc_filesystems_init+0x0/0x22 @ 1
initcall proc_filesystems_init+0x0/0x22 returned 0 after 7 usecs
calling dnotify_init+0x0/0x80 @ 1
initcall dnotify_init+0x0/0x80 returned 0 after 195 usecs
calling inotify_setup+0x0/0x12 @ 1
initcall inotify_setup+0x0/0x12 returned 0 after 0 usecs
calling inotify_user_setup+0x0/0xbe @ 1
initcall inotify_user_setup+0x0/0xbe returned 0 after 225 usecs
calling aio_setup+0x0/0x9f @ 1
initcall aio_setup+0x0/0x9f returned 0 after 372 usecs
calling proc_locks_init+0x0/0x22 @ 1
initcall proc_locks_init+0x0/0x22 returned 0 after 42 usecs
calling init_sys32_ioctl+0x0/0x7c @ 1
initcall init_sys32_ioctl+0x0/0x7c returned 0 after 14 usecs
calling init_mbcache+0x0/0x14 @ 1
initcall init_mbcache+0x0/0x14 returned 0 after 2 usecs
calling dquot_init+0x0/0xfe @ 1
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
initcall dquot_init+0x0/0xfe returned 0 after 34230 usecs
calling init_v2_quota_format+0x0/0x12 @ 1
initcall init_v2_quota_format+0x0/0x12 returned 0 after 0 usecs
calling proc_cmdline_init+0x0/0x22 @ 1
initcall proc_cmdline_init+0x0/0x22 returned 0 after 6 usecs
calling proc_cpuinfo_init+0x0/0x22 @ 1
initcall proc_cpuinfo_init+0x0/0x22 returned 0 after 5 usecs
calling proc_devices_init+0x0/0x22 @ 1
initcall proc_devices_init+0x0/0x22 returned 0 after 5 usecs
calling proc_interrupts_init+0x0/0x22 @ 1
initcall proc_interrupts_init+0x0/0x22 returned 0 after 5 usecs
calling proc_loadavg_init+0x0/0x22 @ 1
initcall proc_loadavg_init+0x0/0x22 returned 0 after 5 usecs
calling proc_meminfo_init+0x0/0x22 @ 1
initcall proc_meminfo_init+0x0/0x22 returned 0 after 5 usecs
calling proc_stat_init+0x0/0x22 @ 1
initcall proc_stat_init+0x0/0x22 returned 0 after 5 usecs
calling proc_uptime_init+0x0/0x22 @ 1
initcall proc_uptime_init+0x0/0x22 returned 0 after 5 usecs
calling proc_version_init+0x0/0x22 @ 1
initcall proc_version_init+0x0/0x22 returned 0 after 12 usecs
calling proc_softirqs_init+0x0/0x22 @ 1
initcall proc_softirqs_init+0x0/0x22 returned 0 after 5 usecs
calling proc_kcore_init+0x0/0xb5 @ 1
initcall proc_kcore_init+0x0/0xb5 returned 0 after 14 usecs
calling vmcore_init+0x0/0x8e2 @ 1
initcall vmcore_init+0x0/0x8e2 returned 0 after 1 usecs
calling proc_kmsg_init+0x0/0x25 @ 1
initcall proc_kmsg_init+0x0/0x25 returned 0 after 5 usecs
calling proc_page_init+0x0/0x3c @ 1
initcall proc_page_init+0x0/0x3c returned 0 after 10 usecs
calling configfs_init+0x0/0xb3 @ 1
initcall configfs_init+0x0/0xb3 returned 0 after 122 usecs
calling init_devpts_fs+0x0/0x4d @ 1
initcall init_devpts_fs+0x0/0x4d returned 0 after 45 usecs
calling init_ext3_fs+0x0/0x6b @ 1
initcall init_ext3_fs+0x0/0x6b returned 0 after 223 usecs
calling journal_init+0x0/0x99 @ 1
initcall journal_init+0x0/0x99 returned 0 after 412 usecs
calling init_ramfs_fs+0x0/0x12 @ 1
initcall init_ramfs_fs+0x0/0x12 returned 0 after 1 usecs
calling init_hugetlbfs_fs+0x0/0x98 @ 1
initcall init_hugetlbfs_fs+0x0/0x98 returned 0 after 121 usecs
calling init_iso9660_fs+0x0/0x6c @ 1
initcall init_iso9660_fs+0x0/0x6c returned 0 after 126 usecs
calling init_nls_cp437+0x0/0x12 @ 1
initcall init_nls_cp437+0x0/0x12 returned 0 after 0 usecs
calling init_nls_ascii+0x0/0x12 @ 1
initcall init_nls_ascii+0x0/0x12 returned 0 after 0 usecs
calling ipc_init+0x0/0x2f @ 1
msgmni has been set to 16004
initcall ipc_init+0x0/0x2f returned 0 after 14644 usecs
calling ipc_sysctl_init+0x0/0x14 @ 1
initcall ipc_sysctl_init+0x0/0x14 returned 0 after 2 usecs
calling init_mqueue_fs+0x0/0xb4 @ 1
initcall init_mqueue_fs+0x0/0xb4 returned 0 after 129 usecs
calling key_proc_init+0x0/0x53 @ 1
initcall key_proc_init+0x0/0x53 returned 0 after 13 usecs
calling selinux_nf_ip_init+0x0/0x60 @ 1
initcall selinux_nf_ip_init+0x0/0x60 returned 0 after 0 usecs
calling init_sel_fs+0x0/0x69 @ 1
initcall init_sel_fs+0x0/0x69 returned 0 after 0 usecs
calling selnl_init+0x0/0x4d @ 1
initcall selnl_init+0x0/0x4d returned 0 after 21 usecs
calling sel_netif_init+0x0/0x66 @ 1
initcall sel_netif_init+0x0/0x66 returned 0 after 0 usecs
calling sel_netnode_init+0x0/0x72 @ 1
initcall sel_netnode_init+0x0/0x72 returned 0 after 0 usecs
calling sel_netport_init+0x0/0x72 @ 1
initcall sel_netport_init+0x0/0x72 returned 0 after 0 usecs
calling aurule_init+0x0/0x37 @ 1
initcall aurule_init+0x0/0x37 returned 0 after 1 usecs
calling crypto_wq_init+0x0/0x2e @ 1
initcall crypto_wq_init+0x0/0x2e returned 0 after 200 usecs
calling crypto_algapi_init+0x0/0xd @ 1
initcall crypto_algapi_init+0x0/0xd returned 0 after 15 usecs
calling skcipher_module_init+0x0/0x35 @ 1
initcall skcipher_module_init+0x0/0x35 returned 0 after 0 usecs
calling chainiv_module_init+0x0/0x12 @ 1
initcall chainiv_module_init+0x0/0x12 returned 0 after 2 usecs
calling eseqiv_module_init+0x0/0x12 @ 1
initcall eseqiv_module_init+0x0/0x12 returned 0 after 1 usecs
calling hmac_module_init+0x0/0x12 @ 1
initcall hmac_module_init+0x0/0x12 returned 0 after 0 usecs
calling md5_mod_init+0x0/0x12 @ 1
initcall md5_mod_init+0x0/0x12 returned 0 after 109 usecs
calling sha1_generic_mod_init+0x0/0x12 @ 1
initcall sha1_generic_mod_init+0x0/0x12 returned 0 after 81 usecs
calling crc32c_mod_init+0x0/0x12 @ 1
initcall crc32c_mod_init+0x0/0x12 returned 0 after 146 usecs
calling krng_mod_init+0x0/0x12 @ 1
alg: No test for stdrng (krng)
initcall krng_mod_init+0x0/0x12 returned 0 after 3074 usecs
calling proc_genhd_init+0x0/0x36 @ 1
initcall proc_genhd_init+0x0/0x36 returned 0 after 12 usecs
calling bsg_init+0x0/0x12e @ 1
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
initcall bsg_init+0x0/0x12e returned 0 after 23477 usecs
calling noop_init+0x0/0x14 @ 1
io scheduler noop registered
initcall noop_init+0x0/0x14 returned 0 after 13940 usecs
calling as_init+0x0/0x14 @ 1
io scheduler anticipatory registered
initcall as_init+0x0/0x14 returned 0 after 5975 usecs
calling deadline_init+0x0/0x14 @ 1
io scheduler deadline registered
initcall deadline_init+0x0/0x14 returned 0 after 15641 usecs
calling cfq_init+0x0/0x94 @ 1
io scheduler cfq registered (default)
initcall cfq_init+0x0/0x94 returned 0 after 19841 usecs
calling percpu_counter_startup+0x0/0x19 @ 1
initcall percpu_counter_startup+0x0/0x19 returned 0 after 9 usecs
calling dynamic_debug_init+0x0/0x12b @ 1
initcall dynamic_debug_init+0x0/0x12b returned 0 after 150 usecs
calling pci_proc_init+0x0/0x6a @ 1
initcall pci_proc_init+0x0/0x6a returned 0 after 385 usecs
calling pcie_portdrv_init+0x0/0x4c @ 1
alloc irq_desc for 62 on node 0
alloc kstat_irqs on node 0
pcieport 0000:00:0b.0: irq 62 for MSI/MSI-X
pcieport 0000:00:0b.0: setting latency timer to 64
alloc irq_desc for 63 on node 0
alloc kstat_irqs on node 0
pcieport 0000:00:0c.0: irq 63 for MSI/MSI-X
pcieport 0000:00:0c.0: setting latency timer to 64
alloc irq_desc for 64 on node 0
alloc kstat_irqs on node 0
pcieport 0000:00:0d.0: irq 64 for MSI/MSI-X
pcieport 0000:00:0d.0: setting latency timer to 64
alloc irq_desc for 65 on node 0
alloc kstat_irqs on node 0
pcieport 0000:00:0e.0: irq 65 for MSI/MSI-X
pcieport 0000:00:0e.0: setting latency timer to 64
alloc irq_desc for 66 on node 1
alloc kstat_irqs on node 1
pcieport 0000:40:0c.0: irq 66 for MSI/MSI-X
pcieport 0000:40:0c.0: setting latency timer to 64
alloc irq_desc for 67 on node 1
alloc kstat_irqs on node 1
pcieport 0000:40:0d.0: irq 67 for MSI/MSI-X
pcieport 0000:40:0d.0: setting latency timer to 64
alloc irq_desc for 68 on node 1
alloc kstat_irqs on node 1
pcieport 0000:40:0e.0: irq 68 for MSI/MSI-X
pcieport 0000:40:0e.0: setting latency timer to 64
initcall pcie_portdrv_init+0x0/0x4c returned 0 after 492745 usecs
calling aer_service_init+0x0/0x2b @ 1
aer 0000:00:0b.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:0c.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:0d.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:0e.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:40:0c.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:40:0d.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:40:0e.0:pcie02: AER service couldn't init device: no _OSC support
initcall aer_service_init+0x0/0x2b returned 0 after 243211 usecs
calling pci_hotplug_init+0x0/0x1d @ 1
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
initcall pci_hotplug_init+0x0/0x1d returned 0 after 24371 usecs
calling pcied_init+0x0/0x7a @ 1
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
initcall pcied_init+0x0/0x7a returned 0 after 30315 usecs
calling acpiphp_init+0x0/0x5f @ 1
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
initcall acpiphp_init+0x0/0x5f returned -19 after 29977 usecs
calling pci_stub_init+0x0/0x12a @ 1
pci-stub: invalid id string ""
initcall pci_stub_init+0x0/0x12a returned 0 after 14874 usecs
calling fb_console_init+0x0/0x12a @ 1
initcall fb_console_init+0x0/0x12a returned 0 after 46 usecs
calling xenfb_init+0x0/0x44 @ 1
initcall xenfb_init+0x0/0x44 returned -19 after 0 usecs
calling vesafb_init+0x0/0x235 @ 1
initcall vesafb_init+0x0/0x235 returned 0 after 102 usecs
calling efifb_init+0x0/0x1f2 @ 1
initcall efifb_init+0x0/0x1f2 returned -19 after 4 usecs
calling acpi_reserve_resources+0x0/0xeb @ 1
initcall acpi_reserve_resources+0x0/0xeb returned 0 after 6 usecs
calling irqrouter_init_sysfs+0x0/0x38 @ 1
initcall irqrouter_init_sysfs+0x0/0x38 returned 0 after 60 usecs
calling acpi_ac_init+0x0/0x45 @ 1
initcall acpi_ac_init+0x0/0x45 returned 0 after 55 usecs
calling acpi_button_init+0x0/0x56 @ 1
input: Power Button as /class/input/input0
ACPI: Power Button [PWRF]
initcall acpi_button_init+0x0/0x56 returned 0 after 35422 usecs
calling acpi_fan_init+0x0/0x56 @ 1
initcall acpi_fan_init+0x0/0x56 returned 0 after 44 usecs
calling acpi_pci_slot_init+0x0/0x20 @ 1
initcall acpi_pci_slot_init+0x0/0x20 returned 0 after 1528 usecs
calling acpi_processor_init+0x0/0x10e @ 1
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
processor LNXCPU:02: registered as cooling_device2
processor LNXCPU:03: registered as cooling_device3
initcall acpi_processor_init+0x0/0x10e returned 0 after 81712 usecs
calling acpi_container_init+0x0/0x42 @ 1
initcall acpi_container_init+0x0/0x42 returned 0 after 5616 usecs
calling acpi_thermal_init+0x0/0x7b @ 1
initcall acpi_thermal_init+0x0/0x7b returned 0 after 89 usecs
calling acpi_battery_init+0x0/0x16 @ 1
initcall acpi_battery_init+0x0/0x16 returned 0 after 5 usecs
calling 1_acpi_battery_init_async+0x0/0x3c @ 76
initcall 1_acpi_battery_init_async+0x0/0x3c returned 0 after 73 usecs
calling hypervisor_subsys_init+0x0/0x25 @ 1
initcall hypervisor_subsys_init+0x0/0x25 returned -19 after 0 usecs
calling hyper_sysfs_init+0x0/0xb3 @ 1
initcall hyper_sysfs_init+0x0/0xb3 returned -19 after 0 usecs
calling rand_initialize+0x0/0x31 @ 1
initcall rand_initialize+0x0/0x31 returned 0 after 16 usecs
calling tty_init+0x0/0xf5 @ 1
initcall tty_init+0x0/0xf5 returned 0 after 3064 usecs
calling pty_init+0x0/0x284 @ 1
initcall pty_init+0x0/0x284 returned 0 after 63 usecs
calling sysrq_init+0x0/0x25 @ 1
initcall sysrq_init+0x0/0x25 returned 0 after 9 usecs
calling xen_init+0x0/0x78 @ 1
initcall xen_init+0x0/0x78 returned -19 after 0 usecs
calling raw_init+0x0/0xe5 @ 1
initcall raw_init+0x0/0xe5 returned 0 after 84 usecs
calling hpet_init+0x0/0x6a @ 1
initcall hpet_init+0x0/0x6a returned 0 after 258 usecs
calling nvram_init+0x0/0x82 @ 1
Non-volatile memory driver v1.3
initcall nvram_init+0x0/0x82 returned 0 after 16609 usecs
calling agp_init+0x0/0x26 @ 1
Linux agpgart interface v0.103
initcall agp_init+0x0/0x26 returned 0 after 12699 usecs
calling agp_intel_init+0x0/0x29 @ 1
initcall agp_intel_init+0x0/0x29 returned 0 after 60 usecs
calling agp_sis_init+0x0/0x29 @ 1
initcall agp_sis_init+0x0/0x29 returned 0 after 46 usecs
calling agp_via_init+0x0/0x29 @ 1
initcall agp_via_init+0x0/0x29 returned 0 after 45 usecs
calling init_tis+0x0/0x91 @ 1
initcall init_tis+0x0/0x91 returned 0 after 40 usecs
calling cn_proc_init+0x0/0x3d @ 1
initcall cn_proc_init+0x0/0x3d returned 0 after 3 usecs
calling serial8250_init+0x0/0x14c @ 1
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
async_waiting @ 1
async_continuing @ 1 after 0 usec
async_waiting @ 1
async_continuing @ 1 after 0 usec
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
async_waiting @ 1
async_continuing @ 1 after 0 usec
async_waiting @ 1
async_continuing @ 1 after 0 usec
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
initcall serial8250_init+0x0/0x14c returned 0 after 627179 usecs
calling serial8250_pnp_init+0x0/0x12 @ 1
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
initcall serial8250_pnp_init+0x0/0x12 returned 0 after 9128 usecs
calling serial8250_pci_init+0x0/0x1b @ 1
initcall serial8250_pci_init+0x0/0x1b returned 0 after 99 usecs
calling init_kgdboc+0x0/0x16 @ 1
initcall init_kgdboc+0x0/0x16 returned 0 after 1 usecs
calling topology_sysfs_init+0x0/0x53 @ 1
initcall topology_sysfs_init+0x0/0x53 returned 0 after 75 usecs
calling brd_init+0x0/0x160 @ 1
brd: module loaded
initcall brd_init+0x0/0x160 returned 0 after 11513 usecs
calling loop_init+0x0/0x189 @ 1
loop: module loaded
initcall loop_init+0x0/0x189 returned 0 after 10722 usecs
calling init_kgdbts+0x0/0x16 @ 1
initcall init_kgdbts+0x0/0x16 returned 0 after 1 usecs
calling mac_hid_init+0x0/0x8e @ 1
input: Macintosh mouse button emulation as /class/input/input1
initcall mac_hid_init+0x0/0x8e returned 0 after 31280 usecs
calling scsi_dh_init+0x0/0x3f @ 1
initcall scsi_dh_init+0x0/0x3f returned 0 after 1 usecs
calling init_sd+0x0/0x181 @ 1
initcall init_sd+0x0/0x181 returned 0 after 231 usecs
calling init_sr+0x0/0x49 @ 1
initcall init_sr+0x0/0x49 returned 0 after 42 usecs
calling init_sg+0x0/0x122 @ 1
initcall init_sg+0x0/0x122 returned 0 after 81 usecs
calling piix_init+0x0/0x29 @ 1
initcall piix_init+0x0/0x29 returned 0 after 59 usecs
calling fixed_mdio_bus_init+0x0/0xf4 @ 1
Fixed MDIO Bus: probed
initcall fixed_mdio_bus_init+0x0/0xf4 returned 0 after 10653 usecs
calling bnx2_init+0x0/0x1b @ 1
Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.2 (Aug 21, 2009)
ACPI: PCI Interrupt Link [LNKX] enabled at IRQ 17
alloc irq_desc for 17 on node 0
alloc kstat_irqs on node 0
bnx2 0000:03:00.0: PCI INT A -> Link[LNKX] -> GSI 17 (level, high) -> IRQ 17
bnx2 0000:03:00.0: firmware: using built-in firmware bnx2/bnx2-mips-06-5.0.0.j3.fw
bnx2 0000:03:00.0: firmware: using built-in firmware bnx2/bnx2-rv2p-06-5.0.0.j3.fw
eth0: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 17, node addr 00:18:fe:35:26:f6
ACPI: PCI Interrupt Link [LNKW] enabled at IRQ 16
alloc irq_desc for 16 on node 0
alloc kstat_irqs on node 0
bnx2 0000:05:00.0: PCI INT A -> Link[LNKW] -> GSI 16 (level, high) -> IRQ 16
bnx2 0000:05:00.0: firmware: using built-in firmware bnx2/bnx2-mips-06-5.0.0.j3.fw
bnx2 0000:05:00.0: firmware: using built-in firmware bnx2/bnx2-rv2p-06-5.0.0.j3.fw
eth1: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X 64-bit 133MHz found at mem fa000000, IRQ 16, node addr 00:18:fe:35:26:f4
initcall bnx2_init+0x0/0x1b returned 0 after 467965 usecs
calling net_olddevs_init+0x0/0xa0 @ 1
initcall net_olddevs_init+0x0/0xa0 returned 0 after 5 usecs
calling init_netconsole+0x0/0x206 @ 1
netconsole: local port 50000
netconsole: local IP 139.185.50.77
netconsole: interface eth0
netconsole: remote port 50000
netconsole: remote IP 139.185.50.76
netconsole: remote ethernet address 00:18:fe:34:1c:3d
netconsole: device eth0 not up yet, forcing it
alloc irq_desc for 69 on node 0
alloc kstat_irqs on node 0
bnx2 0000:03:00.0: irq 69 for MSI/MSI-X
bnx2: eth0: using MSI
bnx2: eth0 NIC SerDes Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON
netconsole: carrier detect appears untrustworthy, waiting 4 seconds
bnx2: eth0 NIC SerDes Link is Down
bnx2: eth0 NIC SerDes Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON
Clocksource tsc unstable (delta = 4398045281281 ns)
console [netcon0] enabled
netconsole: network logging started
initcall init_netconsole+0x0/0x206 returned 0 after 35029097 usecs
calling cdrom_init+0x0/0xd @ 1
initcall cdrom_init+0x0/0xd returned 0 after 14 usecs
calling mon_init+0x0/0x103 @ 1
initcall mon_init+0x0/0x103 returned 0 after 116 usecs
calling ehci_hcd_init+0x0/0xc0 @ 1
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [LNU2] enabled at IRQ 23
alloc irq_desc for 23 on node 0
alloc kstat_irqs on node 0
ehci_hcd 0000:00:02.1: PCI INT B -> Link[LNU2] -> GSI 23 (level, high) -> IRQ 23
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: irq 23, io mem 0xf7dd0000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-rc8 ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
initcall ehci_hcd_init+0x0/0xc0 returned 0 after 459226 usecs
calling ohci_hcd_mod_init+0x0/0x92 @ 1
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LNU0] enabled at IRQ 22
alloc irq_desc for 22 on node 0
alloc kstat_irqs on node 0
ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNU0] -> GSI 22 (level, high) -> IRQ 22
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 22, io mem 0xf7de0000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-rc8 ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
initcall ohci_hcd_mod_init+0x0/0x92 returned 0 after 419121 usecs
calling uhci_hcd_init+0x0/0xc1 @ 1
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:01:04.4: PCI INT B -> Link[LNKX] -> GSI 17 (level, high) -> IRQ 17
uhci_hcd 0000:01:04.4: UHCI Host Controller
uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 3
uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports
uhci_hcd 0000:01:04.4: HCRESET not completed yet!
uhci_hcd 0000:01:04.4: irq 17, io base 0x00001800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-rc8 uhci_hcd
usb usb3: SerialNumber: 0000:01:04.4
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
initcall uhci_hcd_init+0x0/0xc1 returned 0 after 353662 usecs
calling i8042_init+0x0/0x3f9 @ 1
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
initcall i8042_init+0x0/0x3f9 returned 0 after 77208 usecs
calling serport_init+0x0/0x34 @ 1
initcall serport_init+0x0/0x34 returned 0 after 1 usecs
calling mousedev_init+0x0/0x62 @ 1
mice: PS/2 mouse device common for all mice
initcall mousedev_init+0x0/0x62 returned 0 after 21566 usecs
calling evdev_init+0x0/0x12 @ 1
initcall evdev_init+0x0/0x12 returned 0 after 119 usecs
usb 3-1: new full speed USB device using uhci_hcd and address 2
calling atkbd_init+0x0/0x27 @ 1
initcall atkbd_init+0x0/0x27 returned 0 after 50 usecs
calling psmouse_init+0x0/0x70 @ 1
initcall psmouse_init+0x0/0x70 returned 0 after 120 usecs
calling xenkbd_init+0x0/0x44 @ 1
usb 3-1: New USB device found, idVendor=03f0, idProduct=1027
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: Virtual Keyboard
usb 3-1: Manufacturer: HP
usb 3-1: configuration #1 chosen from 1 choice
usb 3-2: new full speed USB device using uhci_hcd and address 3
initcall xenkbd_init+0x0/0x44 returned -19 after 0 usecs
calling cmos_init+0x0/0x6d @ 1
Driver 'rtc_cmos' needs updating - please use bus_type methods
rtc_cmos rtc_cmos: RTC can wake from S4
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
usb 3-2: New USB device found, idVendor=03f0, idProduct=1327
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
initcall cmos_init+0x0/0x6d returned 0 after 69735 usecs
calling dm_init+0x0/0x49 @ 1
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
initcall dm_init+0x0/0x49 returned 0 after 746 usecs
calling dm_snapshot_init+0x0/0x238 @ 1
initcall dm_snapshot_init+0x0/0x238 returned 0 after 371 usecs
calling dm_mirror_init+0x0/0x79 @ 1
initcall dm_mirror_init+0x0/0x79 returned 0 after 101 usecs
calling dm_dirty_log_init+0x0/0x59 @ 1
initcall dm_dirty_log_init+0x0/0x59 returned 0 after 1 usecs
calling dm_zero_init+0x0/0x31 @ 1
initcall dm_zero_init+0x0/0x31 returned 0 after 0 usecs
calling init_ladder+0x0/0x12 @ 1
cpuidle: using governor ladder
initcall init_ladder+0x0/0x12 returned 0 after 2 usecs
calling init_menu+0x0/0x12 @ 1
cpuidle: using governor menu
initcall init_menu+0x0/0x12 returned 0 after 1 usecs
calling efivars_init+0x0/0x1f9 @ 1
initcall efivars_init+0x0/0x1f9 returned -19 after 0 usecs
calling hid_init+0x0/0x66 @ 1
initcall hid_init+0x0/0x66 returned 0 after 102 usecs
calling a4_init+0x0/0x1b @ 1
initcall a4_init+0x0/0x1b returned 0 after 33 usecs
calling apple_init+0x0/0x38 @ 1
initcall apple_init+0x0/0x38 returned 0 after 42 usecs
calling belkin_init+0x0/0x1b @ 1
initcall belkin_init+0x0/0x1b returned 0 after 32 usecs
calling ch_init+0x0/0x1b @ 1
initcall ch_init+0x0/0x1b returned 0 after 37 usecs
calling ch_init+0x0/0x1b @ 1
initcall ch_init+0x0/0x1b returned 0 after 32 usecs
calling cp_init+0x0/0x1b @ 1
initcall cp_init+0x0/0x1b returned 0 after 32 usecs
calling dr_init+0x0/0x1b @ 1
initcall dr_init+0x0/0x1b returned 0 after 32 usecs
calling ez_init+0x0/0x1b @ 1
initcall ez_init+0x0/0x1b returned 0 after 32 usecs
calling gyration_init+0x0/0x1b @ 1
initcall gyration_init+0x0/0x1b returned 0 after 32 usecs
calling ks_init+0x0/0x1b @ 1
initcall ks_init+0x0/0x1b returned 0 after 32 usecs
calling kye_init+0x0/0x1b @ 1
initcall kye_init+0x0/0x1b returned 0 after 32 usecs
calling lg_init+0x0/0x1b @ 1
initcall lg_init+0x0/0x1b returned 0 after 36 usecs
calling ms_init+0x0/0x1b @ 1
initcall ms_init+0x0/0x1b returned 0 after 36 usecs
calling mr_init+0x0/0x1b @ 1
initcall mr_init+0x0/0x1b returned 0 after 32 usecs
calling ntrig_init+0x0/0x1b @ 1
initcall ntrig_init+0x0/0x1b returned 0 after 32 usecs
calling pl_init+0x0/0x1b @ 1
initcall pl_init+0x0/0x1b returned 0 after 32 usecs
calling pl_init+0x0/0x1b @ 1
initcall pl_init+0x0/0x1b returned 0 after 32 usecs
calling samsung_init+0x0/0x1b @ 1
initcall samsung_init+0x0/0x1b returned 0 after 33 usecs
calling sjoy_init+0x0/0x1b @ 1
initcall sjoy_init+0x0/0x1b returned 0 after 33 usecs
calling sony_init+0x0/0x1b @ 1
initcall sony_init+0x0/0x1b returned 0 after 45 usecs
calling sp_init+0x0/0x1b @ 1
initcall sp_init+0x0/0x1b returned 0 after 32 usecs
calling ga_init+0x0/0x1b @ 1
initcall ga_init+0x0/0x1b returned 0 after 32 usecs
calling tm_init+0x0/0x1b @ 1
initcall tm_init+0x0/0x1b returned 0 after 32 usecs
calling ts_init+0x0/0x1b @ 1
initcall ts_init+0x0/0x1b returned 0 after 32 usecs
calling twinhan_init+0x0/0x1b @ 1
initcall twinhan_init+0x0/0x1b returned 0 after 38 usecs
calling zp_init+0x0/0x1b @ 1
initcall zp_init+0x0/0x1b returned 0 after 32 usecs
calling hid_init+0x0/0xc7 @ 1
usbcore: registered new interface driver hiddev
input: HP Virtual Keyboard as /class/input/input2
generic-usb 0003:03F0:1027.0001: input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1/input0
input: HP Virtual Keyboard as /class/input/input3
generic-usb 0003:03F0:1027.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1/input1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
initcall hid_init+0x0/0xc7 returned 0 after 11184 usecs
calling staging_init+0x0/0x8 @ 1
initcall staging_init+0x0/0x8 returned 0 after 0 usecs
calling flow_cache_init+0x0/0x187 @ 1
initcall flow_cache_init+0x0/0x187 returned 0 after 127 usecs
calling blackhole_module_init+0x0/0x12 @ 1
initcall blackhole_module_init+0x0/0x12 returned 0 after 1 usecs
calling init_cgroup_cls+0x0/0x12 @ 1
initcall init_cgroup_cls+0x0/0x12 returned 0 after 0 usecs
calling nf_conntrack_standalone_init+0x0/0x12 @ 1
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
initcall nf_conntrack_standalone_init+0x0/0x12 returned 0 after 368 usecs
calling xt_init+0x0/0x129 @ 1
initcall xt_init+0x0/0x129 returned 0 after 7 usecs
calling tcpudp_mt_init+0x0/0x17 @ 1
initcall tcpudp_mt_init+0x0/0x17 returned 0 after 1 usecs
calling conntrack_mt_init+0x0/0x17 @ 1
initcall conntrack_mt_init+0x0/0x17 returned 0 after 0 usecs
calling state_mt_init+0x0/0x17 @ 1
initcall state_mt_init+0x0/0x17 returned 0 after 0 usecs
calling sysctl_ipv4_init+0x0/0x4e @ 1
initcall sysctl_ipv4_init+0x0/0x4e returned 0 after 10 usecs
calling init_syncookies+0x0/0x19 @ 1
initcall init_syncookies+0x0/0x19 returned 0 after 26 usecs
calling ipv4_netfilter_init+0x0/0x17 @ 1
initcall ipv4_netfilter_init+0x0/0x17 returned 0 after 1 usecs
calling nf_conntrack_l3proto_ipv4_init+0x0/0x12d @ 1
initcall nf_conntrack_l3proto_ipv4_init+0x0/0x12d returned 0 after 19 usecs
calling nf_defrag_init+0x0/0x17 @ 1
initcall nf_defrag_init+0x0/0x17 returned 0 after 0 usecs
calling ip_tables_init+0x0/0xaf @ 1
ip_tables: (C) 2000-2006 Netfilter Core Team
initcall ip_tables_init+0x0/0xaf returned 0 after 19 usecs
calling iptable_filter_init+0x0/0x6c @ 1
initcall iptable_filter_init+0x0/0x6c returned 0 after 40 usecs
calling reject_tg_init+0x0/0x12 @ 1
initcall reject_tg_init+0x0/0x12 returned 0 after 0 usecs
calling cubictcp_register+0x0/0x6e @ 1
TCP cubic registered
initcall cubictcp_register+0x0/0x6e returned 0 after 2 usecs
calling xfrm_user_init+0x0/0x4d @ 1
Initializing XFRM netlink socket
initcall xfrm_user_init+0x0/0x4d returned 0 after 13 usecs
calling packet_init+0x0/0x47 @ 1
NET: Registered protocol family 17
initcall packet_init+0x0/0x47 returned 0 after 12 usecs
calling dsa_init_module+0x0/0x14 @ 1
initcall dsa_init_module+0x0/0x14 returned 0 after 1 usecs
calling edsa_init_module+0x0/0x14 @ 1
initcall edsa_init_module+0x0/0x14 returned 0 after 0 usecs
calling trailer_init_module+0x0/0x14 @ 1
initcall trailer_init_module+0x0/0x14 returned 0 after 1 usecs
calling mv88e6060_init+0x0/0x14 @ 1
initcall mv88e6060_init+0x0/0x14 returned 0 after 0 usecs
calling mv88e6123_61_65_init+0x0/0x14 @ 1
initcall mv88e6123_61_65_init+0x0/0x14 returned 0 after 0 usecs
calling mv88e6131_init+0x0/0x14 @ 1
initcall mv88e6131_init+0x0/0x14 returned 0 after 0 usecs
calling dsa_init_module+0x0/0x12 @ 1
initcall dsa_init_module+0x0/0x12 returned 0 after 38 usecs
calling dcbnl_init+0x0/0x32 @ 1
initcall dcbnl_init+0x0/0x32 returned 0 after 1 usecs
calling mce_debugfs_init+0x0/0x3b @ 1
initcall mce_debugfs_init+0x0/0x3b returned 0 after 9 usecs
calling severities_debugfs_init+0x0/0x3b @ 1
initcall severities_debugfs_init+0x0/0x3b returned 0 after 4 usecs
calling hpet_insert_resource+0x0/0x23 @ 1
initcall hpet_insert_resource+0x0/0x23 returned 0 after 2 usecs
calling update_mp_table+0x0/0x470 @ 1
initcall update_mp_table+0x0/0x470 returned 0 after 0 usecs
calling lapic_insert_resource+0x0/0x40 @ 1
initcall lapic_insert_resource+0x0/0x40 returned 0 after 1 usecs
calling init_lapic_nmi_sysfs+0x0/0x39 @ 1
initcall init_lapic_nmi_sysfs+0x0/0x39 returned 0 after 59 usecs
calling io_apic_bug_finalize+0x0/0x1b @ 1
initcall io_apic_bug_finalize+0x0/0x1b returned 0 after 0 usecs
calling check_early_ioremap_leak+0x0/0x65 @ 1
initcall check_early_ioremap_leak+0x0/0x65 returned 0 after 0 usecs
calling pat_memtype_list_init+0x0/0x29 @ 1
initcall pat_memtype_list_init+0x0/0x29 returned 0 after 4 usecs
calling sched_init_debug+0x0/0x24 @ 1
initcall sched_init_debug+0x0/0x24 returned 0 after 4 usecs
calling init_oops_id+0x0/0x36 @ 1
initcall init_oops_id+0x0/0x36 returned 0 after 2 usecs
calling disable_boot_consoles+0x0/0x45 @ 1
initcall disable_boot_consoles+0x0/0x45 returned 0 after 0 usecs
calling pm_qos_power_init+0x0/0x61 @ 1
initcall pm_qos_power_init+0x0/0x61 returned 0 after 132 usecs
calling software_resume+0x0/0x1f1 @ 1
PM: Resume from disk failed.
initcall software_resume+0x0/0x1f1 returned -2 after 1 usecs
initcall software_resume+0x0/0x1f1 returned with error code -2
calling debugfs_kprobe_init+0x0/0x8e @ 1
initcall debugfs_kprobe_init+0x0/0x8e returned 0 after 10 usecs
calling taskstats_init+0x0/0x95 @ 1
registered taskstats version 1
initcall taskstats_init+0x0/0x95 returned 0 after 28 usecs
calling clear_boot_tracer+0x0/0x2d @ 1
initcall clear_boot_tracer+0x0/0x2d returned 0 after 0 usecs
calling max_swapfiles_check+0x0/0x8 @ 1
initcall max_swapfiles_check+0x0/0x8 returned 0 after 0 usecs
calling init_ima+0x0/0x1a @ 1
No TPM chip found, activating TPM-bypass!
initcall init_ima+0x0/0x1a returned 0 after 140 usecs
calling random32_reseed+0x0/0x92 @ 1
initcall random32_reseed+0x0/0x92 returned 0 after 16 usecs
calling pci_resource_alignment_sysfs_init+0x0/0x19 @ 1
initcall pci_resource_alignment_sysfs_init+0x0/0x19 returned 0 after 3 usecs
calling pci_sysfs_init+0x0/0x4c @ 1
initcall pci_sysfs_init+0x0/0x4c returned 0 after 623 usecs
calling boot_wait_for_devices+0x0/0x19 @ 1
initcall boot_wait_for_devices+0x0/0x19 returned 0 after 0 usecs
calling regulator_init_complete+0x0/0x136 @ 1
initcall regulator_init_complete+0x0/0x136 returned 0 after 1 usecs
calling seqgen_init+0x0/0xf @ 1
initcall seqgen_init+0x0/0xf returned 0 after 11 usecs
calling late_resume_init+0x0/0xf9 @ 1
Magic number: 5:785:172
net eth0: hash matches
initcall late_resume_init+0x0/0xf9 returned 0 after 79 usecs
calling scsi_complete_async_scans+0x0/0xfe @ 1
initcall scsi_complete_async_scans+0x0/0xfe returned 0 after 0 usecs
calling rtc_hctosys+0x0/0x167 @ 1
rtc_cmos rtc_cmos: setting system clock to 2009-12-01 10:11:52 UTC (1259662312)
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: Virtual Hub
usb 3-2: Manufacturer: HP
usb 3-2: configuration #1 chosen from 1 choice
hub 3-2:1.0: USB hub found
hub 3-2:1.0: 7 ports detected
initcall rtc_hctosys+0x0/0x167 returned 0 after 4608495 usecs
calling memmap_init+0x0/0xa3 @ 1
initcall memmap_init+0x0/0xa3 returned 0 after 113 usecs
calling pci_mmcfg_late_insert_resources+0x0/0x171 @ 1
initcall pci_mmcfg_late_insert_resources+0x0/0x171 returned 0 after 4 usecs
calling init_net_drop_monitor+0x0/0x147 @ 1
Initalizing network drop monitor service
initcall init_net_drop_monitor+0x0/0x147 returned 0 after 11723 usecs
calling tcp_congestion_default+0x0/0x12 @ 1
initcall tcp_congestion_default+0x0/0x12 returned 0 after 1 usecs
calling initialize_hashrnd+0x0/0x19 @ 1
initcall initialize_hashrnd+0x0/0x19 returned 0 after 5 usecs
async_waiting @ 1
async_continuing @ 1 after 0 usec
Freeing unused kernel memory: 936k freed
Write protecting the kernel read-only data: 6596k
calling cciss_init+0x0/0xa3 [cciss] @ 89
HP CISS Driver (v 3.6.20)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 54
alloc irq_desc for 54 on node 1
alloc kstat_irqs on node 1
cciss 0000:42:08.0: PCI INT A -> Link[LNKA] -> GSI 54 (level, high) -> IRQ 54
alloc irq_desc for 70 on node 1
alloc kstat_irqs on node 1
cciss 0000:42:08.0: irq 70 for MSI/MSI-X
IRQ 70/cciss0: IRQF_DISABLED is not guaranteed on shared IRQs
cciss0: <0x3238> at PCI 0000:42:08.0 IRQ 70 using DAC
cciss/c0d0: p1 p2 p3 p4
cciss/c0d1: p1 p2
initcall cciss_init+0x0/0xa3 [cciss] returned 0 after 222660 usecs
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
calling shpcd_init+0x0/0x68 [shpchp] @ 297
calling edac_init+0x0/0xcf [edac_core] @ 319
EDAC MC: Ver: 2.1.0 Nov 30 2009
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
initcall shpcd_init+0x0/0x68 [shpchp] returned 0 after 160026 usecs
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
calling snd_mem_init+0x0/0x2c [snd_page_alloc] @ 305
initcall snd_mem_init+0x0/0x2c [snd_page_alloc] returned 0 after 16 usecs
calling init_soundcore+0x0/0x8b [soundcore] @ 305
initcall init_soundcore+0x0/0x8b [soundcore] returned 0 after 45 usecs
calling alsa_sound_init+0x0/0x8f [snd] @ 305
initcall alsa_sound_init+0x0/0x8f [snd] returned 0 after 81 usecs
calling k8temp_init+0x0/0x20 [k8temp] @ 337
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141
initcall k8temp_init+0x0/0x20 [k8temp] returned 0 after 9557 usecs
calling alsa_timer_init+0x0/0x187 [snd_timer] @ 305
initcall alsa_timer_init+0x0/0x187 [snd_timer] returned 0 after 93 usecs
calling alsa_pcm_init+0x0/0x71 [snd_pcm] @ 688
initcall alsa_pcm_init+0x0/0x71 [snd_pcm] returned 0 after 16 usecs
calling alsa_mixer_oss_init+0x0/0x3a [snd_mixer_oss] @ 731
initcall alsa_mixer_oss_init+0x0/0x3a [snd_mixer_oss] returned 0 after 1 usecs
calling alsa_pcm_oss_init+0x0/0xa5 [snd_pcm_oss] @ 731
initcall alsa_pcm_oss_init+0x0/0xa5 [snd_pcm_oss] returned 0 after 1 usecs
calling floppy_module_init+0x0/0xd73 [floppy] @ 691
Floppy drive(s): fd0 is 1.44M
calling alsa_seq_device_init+0x0/0x60 [snd_seq_device] @ 758
initcall alsa_seq_device_init+0x0/0x60 [snd_seq_device] returned 0 after 12 usecs
calling alsa_seq_init+0x0/0x57 [snd_seq] @ 781
initcall alsa_seq_init+0x0/0x57 [snd_seq] returned 0 after 126 usecs
calling alsa_seq_midi_event_init+0x0/0x8 [snd_seq_midi_event] @ 781
initcall alsa_seq_midi_event_init+0x0/0x8 [snd_seq_midi_event] returned 0 after 0 usecs
calling alsa_seq_oss_init+0x0/0x19e [snd_seq_oss] @ 781
calling scsi_tgt_init+0x0/0x82 [scsi_tgt] @ 782
initcall scsi_tgt_init+0x0/0x82 [scsi_tgt] returned 0 after 5856 usecs
calling fc_transport_init+0x0/0x4c [scsi_transport_fc] @ 765
initcall fc_transport_init+0x0/0x4c [scsi_transport_fc] returned 0 after 120 usecs
calling alsa_seq_dummy_init+0x0/0xcd [snd_seq_dummy] @ 948
initcall alsa_seq_dummy_init+0x0/0xcd [snd_seq_dummy] returned 0 after 13 usecs
initcall alsa_seq_oss_init+0x0/0x19e [snd_seq_oss] returned 0 after 119301 usecs
calling pcsp_init+0x0/0x20 [snd_pcsp] @ 305
input: PC Speaker as /class/input/input4
initcall pcsp_init+0x0/0x20 [snd_pcsp] returned 0 after 1616 usecs
calling pcspkr_init+0x0/0x12 [pcspkr] @ 305
Error: Driver 'pcspkr' is already registered, aborting...
initcall pcspkr_init+0x0/0x12 [pcspkr] returned -16 after 4 usecs
initcall pcspkr_init+0x0/0x12 [pcspkr] returned with error code -16
calling tg3_init+0x0/0x20 [tg3] @ 1177
tg3.c:v3.102 (September 1, 2009)
ACPI: PCI Interrupt Link [LNKZ] enabled at IRQ 19
alloc irq_desc for 19 on node 0
alloc kstat_irqs on node 0
tg3 0000:07:04.0: PCI INT A -> Link[LNKZ] -> GSI 19 (level, high) -> IRQ 19
calling lpfc_init+0x0/0xd3 [lpfc] @ 782
Emulex LightPulse Fibre Channel SCSI driver 8.3.4
Copyright(c) 2004-2009 Emulex. All rights reserved.
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
ACPI: PCI Interrupt Link [LNKY] enabled at IRQ 18
alloc irq_desc for 18 on node 0
alloc kstat_irqs on node 0
lpfc 0000:08:00.0: PCI INT A -> Link[LNKY] -> GSI 18 (level, high) -> IRQ 18
lpfc 0000:08:00.0: setting latency timer to 64
calling serio_raw_init+0x0/0x20 [serio_raw] @ 1292
initcall serio_raw_init+0x0/0x20 [serio_raw] returned 0 after 52 usecs
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
eth2: Tigon3 [partno(011276-001) rev 9003] (PCIX:133MHz:64-bit) MAC address 00:18:fe:34:1c:2f
eth2: attached PHY is 5714 (1000Base-SX Ethernet) (WireSpeed[0])
eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
eth2: dma_rwctrl[76148000] dma_mask[40-bit]
tg3 0000:07:04.1: PCI INT B -> Link[LNKW] -> GSI 16 (level, high) -> IRQ 16
scsi0 : on PCI bus 08 device 00 irq 18
eth3: Tigon3 [partno(011276-001) rev 9003] (PCIX:133MHz:64-bit) MAC address 00:18:fe:34:1c:30
eth3: attached PHY is 5714 (1000Base-SX Ethernet) (WireSpeed[0])
eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
eth3: dma_rwctrl[76148000] dma_mask[40-bit]
initcall tg3_init+0x0/0x20 [tg3] returned 0 after 688469 usecs
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
calling i2c_init+0x0/0x70 [i2c_core] @ 1304
initcall i2c_init+0x0/0x70 [i2c_core] returned 0 after 98 usecs
calling hpwdt_init+0x0/0x20 [hpwdt] @ 1298
calling ipmi_init_msghandler_mod+0x0/0xd [ipmi_msghandler] @ 1308
ipmi message handler version 39.2
initcall ipmi_init_msghandler_mod+0x0/0xd [ipmi_msghandler] returned 0 after 61 usecs
hpwdt 0000:01:04.0: NMI sourcing is disabled. To enable this functionality you must reboot with nmi_watchdog=0 and load the hpwdt driver with priority=1.
hpwdt 0000:01:04.0: PCI INT A -> Link[LNKW] -> GSI 16 (level, high) -> IRQ 16
calling init_ipmi_si+0x0/0x78c [ipmi_si] @ 1308
IPMI System Interface driver.
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
hpwdt: New timer passed in is 30 seconds.
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear()
EDAC DEBUG: in drivers/edac/edac_mc_sysfs.c, line at 905: edac_sysfs_setup_mc_kset()
EDAC DEBUG: in drivers/edac/edac_mc_sysfs.c, line at 922: edac_sysfs_setup_mc_kset() Registered '.../edac/mc' kobject
initcall edac_init+0x0/0xcf [edac_core] returned 0 after 2361742 usecs
ipmi: Found new BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11)
IPMI kcs interface initialized
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: duplicate interface
floppy0: no floppy controllers found
initcall floppy_module_init+0x0/0xd73 [floppy] returned -19 after 2940571 usecs
calling amd64_edac_init+0x0/0x1268 [amd64_edac_mod] @ 319
EDAC amd64_edac: Ver: 3.2.0 Dec 1 2009
hp Watchdog Timer Driver: 1.1.1, timer margin: 30 seconds (nowayout=0), allow kernel dump: OFF (default = 0/OFF), priority: LAST (default = 0/LAST).
EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 3056: (MC node=0,mc_type='RevF')
initcall hpwdt_init+0x0/0x20 [hpwdt] returned 0 after 1941721 usecs
calling init_ipmi_devintf+0x0/0x106 [ipmi_devintf] @ 1561
ipmi device interface
initcall init_ipmi_devintf+0x0/0x106 [ipmi_devintf] returned 0 after 134 usecs
EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 2365: Addr Map device PCI Bus ID: 0000:00:18.1
EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 2367: DRAM MEM-CTL PCI Bus ID: 0000:00:18.2
EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 2369: Misc device PCI Bus ID: 0000:00:18.3
EDAC amd64: ECC is enabled by BIOS.
get_cpus_on_this_dct_cpumask: nid: 0, cpu: 0
get_cpus_on_this_dct_cpumask: nid: 0, cpu: 2
amd64_nb_mce_bank_enabled_on_node: weight: 2
ipmi_si 0000:01:04.6: PCI INT A -> Link[LNKW] -> GSI 16 (level, high) -> IRQ 16
ipmi_si: Trying PCI-specified kcs state machine at mem address 0xf7ef0000, slave address 0x0, irq 16
EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 2787: core: 0, MCG_CTL: 0x1f, NB MSR is enabled
EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 2787: core: 2, MCG_CTL: 0x0, NB MSR is disabled
EDAC amd64: NB MCE bank disabled, set MSR 0x0000017b[4] on node 0 to enable.
EDAC amd64: WARNING: ECC is disabled by BIOS. Module will NOT be loaded.
Either Enable ECC in the BIOS, or set 'ecc_enable_override'.
Also, use of the override can cause unknown side effects.
EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 3065: ret=-22
amd64_edac: probe of 0000:00:18.2 failed with error -22
EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 3056: (MC node=1,mc_type='RevF')
EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 2365: Addr Map device PCI Bus ID: 0000:00:19.1
EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 2367: DRAM MEM-CTL PCI Bus ID: 0000:00:19.2
EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 2369: Misc device PCI Bus ID: 0000:00:19.3
EDAC amd64: ECC is enabled by BIOS.
get_cpus_on_this_dct_cpumask: nid: 1, cpu: 1
calling drm_core_init+0x0/0x129 [drm] @ 1304
[drm] Initialized drm 1.1.0 20060810
initcall drm_core_init+0x0/0x129 [drm] returned 0 after 96 usecs
get_cpus_on_this_dct_cpumask: nid: 1, cpu: 3
amd64_nb_mce_bank_enabled_on_node: weight: 2
EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 2787: core: 1, MCG_CTL: 0x1f, NB MSR is enabled
EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 2787: core: 3, MCG_CTL: 0x0, NB MSR is disabled
EDAC amd64: NB MCE bank disabled, set MSR 0x0000017b[4] on node 1 to enable.
calling ttm_init+0x0/0x6f [ttm] @ 1304
initcall ttm_init+0x0/0x6f [ttm] returned 0 after 45 usecs
EDAC amd64: WARNING: ECC is disabled by BIOS. Module will NOT be loaded.
Either Enable ECC in the BIOS, or set 'ecc_enable_override'.
Also, use of the override can cause unknown side effects.
EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 3065: ret=-22
amd64_edac: probe of 0000:00:19.2 failed with error -22
initcall amd64_edac_init+0x0/0x1268 [amd64_edac_mod] returned 0 after 1346822 usecs
IRQ 16/ipmi_si: IRQF_DISABLED is not guaranteed on shared IRQs
Using irq 16
lpfc 0000:08:00.1: PCI INT B -> Link[LNKZ] -> GSI 19 (level, high) -> IRQ 19
lpfc 0000:08:00.1: setting latency timer to 64
scsi1 : on PCI bus 08 device 01 irq 19
calling radeon_init+0x0/0xc5 [radeon] @ 1304
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
ipmi: interfacing existing BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11)
IPMI kcs interface initialized
initcall init_ipmi_si+0x0/0x78c [ipmi_si] returned 0 after 3563382 usecs
radeon 0000:01:03.0: PCI INT A -> Link[LNKY] -> GSI 18 (level, high) -> IRQ 18
[drm] radeon: Initializing kernel modesetting.
lpfc 0000:08:00.0: 0:1303 Link Up Event x1 received Data: x1 xf7 x10 x2 x0 x0 0
[drm] register mmio base: 0xF7FF0000
[drm] register mmio size: 65536
[drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[drm] radeon: VRAM 64M
[drm] radeon: VRAM from 0x00000000 to 0x03FFFFFF
[drm] radeon: GTT 512M
[drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF
[drm] radeon: irq initialized.
[drm] Detected VRAM RAM=64M, BAR=128M
[drm] RAM width 16bits DDR
[TTM] Zone kernel: Available graphics memory: 4097704 kiB.
[TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[drm] radeon: 32M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] radeon: cp idle (0x00008080)
[drm] Loading R100 Microcode
platform radeon_cp.0: firmware: requesting radeon/R100_cp.bin
[drm] radeon: ring at 0x0000000020000000
[drm] ring test succeeded in 1 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
scsi 0:0:0:0: RAID COMPAQ MSA1000 5.20 PQ: 0 ANSI: 4
scsi 0:0:0:0: Attached scsi generic sg0 type 12
scsi 0:0:1:0: RAID COMPAQ MSA1000 5.20 PQ: 0 ANSI: 4
scsi 0:0:1:0: Attached scsi generic sg1 type 12
scsi 0:0:1:8: Direct-Access COMPAQ MSA1000 VOLUME 5.20 PQ: 0 ANSI: 4
sd 0:0:1:8: Attached scsi generic sg2 type 0
scsi 0:0:2:0: Enclosure HP MSA2212fc J200 PQ: 0 ANSI: 5
scsi 0:0:2:0: Attached scsi generic sg3 type 13
sd 0:0:1:8: [sda] 2187605616 512-byte logical blocks: (1.12 TB/1.01 TiB)
sd 0:0:1:8: [sda] Write Protect is off
sd 0:0:1:8: [sda] Mode Sense: 83 00 00 08
sd 0:0:1:8: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 0:0:1:8: [sda] Attached SCSI disk
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA
[drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[drm] Encoders:
calling enclosure_init+0x0/0x19 [enclosure] @ 1937
initcall enclosure_init+0x0/0x19 [enclosure] returned 0 after 39 usecs
calling ses_init+0x0/0x40 [ses] @ 1937
ses 0:0:2:0: Attached Enclosure device
initcall ses_init+0x0/0x40 [ses] returned 0 after 90 usecs
[drm] CRT1: INTERNAL_DAC1
[drm] Connector 1:
[drm] VGA
[drm] DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c
[drm] Encoders:
[drm] CRT2: INTERNAL_DAC2
[drm] fb mappable at 0xE8040000
[drm] vram apper at 0xE8000000
[drm] size 1920000
[drm] fb depth is 24
[drm] pitch is 3200
[drm] DAC-8: set mode 800x600 19
initcall lpfc_init+0x0/0xd3 [lpfc] returned 0 after 6279755 usecs
Console: switching to colour frame buffer device 100x37
fb0: radeondrmfb frame buffer device
registered panic notifier
[drm] Initialized radeon 2.0.0 20080528 for 0000:01:03.0 on minor 0
lpfc 0000:08:00.1: 1:1303 Link Up Event x1 received Data: x1 xf7 x10 x2 x0 x0 0
initcall radeon_init+0x0/0xc5 [radeon] returned 0 after 2241593 usecs
scsi 1:0:0:0: RAID COMPAQ MSA1000 5.20 PQ: 0 ANSI: 4
scsi 1:0:0:0: Attached scsi generic sg4 type 12
scsi 1:0:1:0: RAID COMPAQ MSA1000 5.20 PQ: 0 ANSI: 4
scsi 1:0:1:0: Attached scsi generic sg5 type 12
scsi 1:0:1:8: Direct-Access COMPAQ MSA1000 VOLUME 5.20 PQ: 0 ANSI: 4
sd 1:0:1:8: Attached scsi generic sg6 type 0
sd 1:0:1:8: [sdb] 2187605616 512-byte logical blocks: (1.12 TB/1.01 TiB)
sd 1:0:1:8: [sdb] Write Protect is off
sd 1:0:1:8: [sdb] Mode Sense: 83 00 00 08
sd 1:0:1:8: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
scsi 1:0:2:0: Enclosure HP MSA2212fc J200 PQ: 0 ANSI: 5
sd 1:0:1:8: [sdb] Attached SCSI disk
ses 1:0:2:0: Attached Enclosure device
ses 1:0:2:0: Attached scsi generic sg7 type 13
calling floppy_module_init+0x0/0xd73 [floppy] @ 2406
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
initcall floppy_module_init+0x0/0xd73 [floppy] returned -19 after 2984942 usecs
calling parport_default_proc_register+0x0/0x1b [parport] @ 2415
initcall parport_default_proc_register+0x0/0x1b [parport] returned 0 after 12 usecs
calling lp_init_module+0x0/0x274 [lp] @ 2417
calling parport_pc_init+0x0/0x357 [parport_pc] @ 2420
initcall parport_pc_init+0x0/0x357 [parport_pc] returned 0 after 756 usecs
lp: driver loaded but no devices found
initcall lp_init_module+0x0/0x274 [lp] returned 0 after 131211 usecs
calling acpi_memory_device_init+0x0/0x7a [acpi_memhotplug] @ 2452
initcall acpi_memory_device_init+0x0/0x7a [acpi_memhotplug] returned 0 after 5828 usecs
calling acpi_smb_hc_init+0x0/0x18 [sbshc] @ 2457
initcall acpi_smb_hc_init+0x0/0x18 [sbshc] returned 0 after 69 usecs
calling acpi_sbs_init+0x0/0x4f [sbs] @ 2464
initcall acpi_sbs_init+0x0/0x4f [sbs] returned 0 after 82 usecs
calling video_output_class_init+0x0/0x19 [output] @ 2470
initcall video_output_class_init+0x0/0x19 [output] returned 0 after 42 usecs
calling acpi_video_init+0x0/0x70 [video] @ 2470
initcall acpi_video_init+0x0/0x70 [video] returned 0 after 156 usecs
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
EXT3 FS on cciss/c0d0p3, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on cciss/c0d0p1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Can't find ext3 filesystem on dev cciss/c0d0p4.
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on cciss/c0d1p1, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with writeback data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on cciss/c0d1p2, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with writeback data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda1, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with writeback data mode.
Adding 8385920k swap on /dev/cciss/c0d0p2. Priority:-1 extents:1 across:8385920k
warning: process `kudzu' used the deprecated sysctl system call with 1.23.
calling inet6_init+0x0/0x2b2 [ipv6] @ 2687
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
initcall inet6_init+0x0/0x2b2 [ipv6] returned 0 after 49133 usecs
process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.default.retrans_time; Use net.ipv6.neigh.default.retrans_time_ms instead.
calling init_sunrpc+0x0/0x5d [sunrpc] @ 3099
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
initcall init_sunrpc+0x0/0x5d [sunrpc] returned 0 after 93465 usecs
warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use)
calling rfkill_init+0x0/0x79 [rfkill] @ 3159
initcall rfkill_init+0x0/0x79 [rfkill] returned 0 after 138 usecs
calling bt_init+0x0/0x5d [bluetooth] @ 3159
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
initcall bt_init+0x0/0x5d [bluetooth] returned 0 after 113160 usecs
calling l2cap_init+0x0/0xe5 [l2cap] @ 3182
Bluetooth: L2CAP ver 2.14
Bluetooth: L2CAP socket layer initialized
initcall l2cap_init+0x0/0xe5 [l2cap] returned 0 after 15 usecs
calling rfcomm_init+0x0/0xd4 [rfcomm] @ 3182
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
initcall rfcomm_init+0x0/0xd4 [rfcomm] returned 0 after 79610 usecs
calling init_rpcsec_gss+0x0/0x4d [auth_rpcgss] @ 3209
initcall init_rpcsec_gss+0x0/0x4d [auth_rpcgss] returned 0 after 39 usecs
calling fscache_init+0x0/0xab [fscache] @ 3209
Slow work thread pool: Starting up
Slow work thread pool: Ready
FS-Cache: Loaded
initcall fscache_init+0x0/0xab [fscache] returned 0 after 56195 usecs
calling init_nlm+0x0/0x22 [lockd] @ 3209
initcall init_nlm+0x0/0x22 [lockd] returned 0 after 9 usecs
calling init_nfs_fs+0x0/0x139 [nfs] @ 3209
FS-Cache: Netfs 'nfs' registered for caching
initcall init_nfs_fs+0x0/0x139 [nfs] returned 0 after 31224 usecs
svc: failed to register lockdv1 RPC service (errno 97).
VFS: Can't find ext3 filesystem on dev cciss/c0d0p4.
SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount force-fb(V) show-blocked-tasks(W) dump-ftrace-buffer(Z)
calling hidp_init+0x0/0x60 [hidp] @ 3288
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
initcall hidp_init+0x0/0x60 [hidp] returned 0 after 14569 usecs
calling init_autofs4_fs+0x0/0x26 [autofs4] @ 3302
initcall init_autofs4_fs+0x0/0x26 [autofs4] returned 0 after 96 usecs
eth0: no IPv6 routers present
rport-0:0-19: blocked FC remote port time out: removing rport
rport-1:0-20: blocked FC remote port time out: removing rport
next prev parent reply other threads:[~2009-12-01 17:20 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-30 17:28 2.6.32-rc8: amd64_edac slub error Randy Dunlap
2009-11-30 20:35 ` Borislav Petkov
2009-11-30 21:29 ` Randy Dunlap
2009-11-30 22:16 ` Randy Dunlap
2009-12-01 15:16 ` Borislav Petkov
2009-12-01 17:19 ` Randy Dunlap [this message]
2009-12-02 10:58 ` Borislav Petkov
2009-12-02 18:11 ` Randy Dunlap
2009-12-02 22:12 ` Doug Thompson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B155023.1000801@oracle.com \
--to=randy.dunlap@oracle.com \
--cc=borislav.petkov@amd.com \
--cc=dougthompson@xmission.com \
--cc=linux-kernel@vger.kernel.org \
--cc=petkovbb@googlemail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.