[PATCH] Initial support for OMAP3 Thunder board

[Daniel Toussaint <daniel@dmhome.net>]

[-- Attachment #1: Type: text/plain, Size: 246 bytes --]

Dear All,

See attached patch for this board: 
http://www.technexion.com/index.php/thunder
The patch contains board file, support for an LCD panel under DSS2 and 
support for Alsa sound.

/Signed-off-by Daniel Toussaint <daniel@dmhome.net>


///

[-- Attachment #2: omap3thunder20091210.diff --]
[-- Type: text/x-patch, Size: 28399 bytes --]

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 16c0c13..e5493a5 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -151,6 +151,11 @@ config MACH_OMAP_4430SDP
 	bool "OMAP 4430 SDP board"
 	depends on ARCH_OMAP4
 
+config MACH_OMAP3_THUNDER
+	bool "Thunder OMAP3530 board" 
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX 
+	 select OMAP_PACKAGE_CUS
+
 config OMAP3_EMU
 	bool "OMAP3 debugging peripherals"
 	depends on ARCH_OMAP3
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 0c5d886..bd76499 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -105,6 +105,9 @@ obj-$(CONFIG_MACH_OMAP_4430SDP)		+= board-4430sdp.o
 
 obj-$(CONFIG_MACH_OMAP3517EVM)     += board-am3517evm.o
 
+obj-$(CONFIG_MACH_OMAP3_THUNDER)         += board-omap3thunder.o \
+	                                           mmc-twl4030.o
+
 # Platform specific device init code
 obj-y					+= usb-musb.o
 obj-$(CONFIG_MACH_OMAP2_TUSB6010)	+= usb-tusb6010.o
diff --git a/arch/arm/mach-omap2/board-omap3thunder.c b/arch/arm/mach-omap2/board-omap3thunder.c
new file mode 100644
index 0000000..d6ea9de
--- /dev/null
+++ b/arch/arm/mach-omap2/board-omap3thunder.c
@@ -0,0 +1,647 @@
+/*
+ * linux/arch/arm/mach-omap2/board-omap3touchbook.c
+ *
+ * Copyright (C) 2009 Technexion 
+ *
+ * Modified from mach-omap2/board-omap3beagleboard.c
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+
+#include <linux/regulator/machine.h>
+#include <linux/i2c/twl4030.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <plat/board.h>
+#include <plat/usb.h>
+#include <linux/usb/otg.h>
+#include <plat/common.h>
+#include <plat/gpmc.h>
+#include <plat/nand.h>
+#include <plat/mux.h>
+#include <plat/display.h>
+
+#include "mmc-twl4030.h"
+#include "mux.h"
+
+
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <plat/mcspi.h> 
+
+#include <plat/mmc.h> 
+
+
+#define OMAP3_THUNDER_TS_GPIO	136
+
+#define GPMC_CS0_BASE  0x60
+#define GPMC_CS_SIZE   0x30
+
+#define NAND_BLOCK_SIZE		SZ_128K
+
+#define THUNDER_DVI_PANEL_EN_GPIO 199 /* GPIO 7 on TWL4030 */
+#define THUNDER_LCD_PANEL_ENVDD 138 
+#define THUNDER_LCD_PON 139
+
+#define TWL_INTBR_GPBR1 0x0c
+#define TWL_INTBR_PMBR1 0x0d
+#define TWL_PWM0_ON    0x00
+#define TWL_PWM0_OFF   0x01
+
+static int lcd_enabled;
+static int dvi_enabled;
+
+static void __init thunder_display_init(void)
+{
+	gpio_request(THUNDER_LCD_PANEL_ENVDD, "lcd_panel_envdd");
+	gpio_request(THUNDER_LCD_PON, "lcd_panel_pon");
+	gpio_direction_output(THUNDER_LCD_PON, 1); 
+	gpio_direction_output(THUNDER_LCD_PANEL_ENVDD, 0);
+	return;
+}
+
+static int thunder_enable_lcd(struct omap_dss_device *dssdev)
+{
+	
+	if (dvi_enabled) {
+		printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
+		return -EINVAL;
+	}
+
+	gpio_set_value(THUNDER_LCD_PANEL_ENVDD, 0);
+	gpio_set_value(THUNDER_LCD_PON, 1);
+
+	/* This turns on the backlight, move this to backlight code later */
+	twl4030_i2c_write_u8(TWL4030_MODULE_PWM0, 0x81, TWL_PWM0_ON);
+        twl4030_i2c_write_u8(TWL4030_MODULE_INTBR, 0x04, TWL_INTBR_PMBR1);
+        twl4030_i2c_write_u8(TWL4030_MODULE_PWM0, 6 + 40 , TWL_PWM0_OFF);
+        twl4030_i2c_write_u8(TWL4030_MODULE_INTBR, 0x05, TWL_INTBR_GPBR1);
+	twl4030_i2c_write_u8(TWL4030_MODULE_PWM0, 6 + 50 , TWL_PWM0_OFF);
+	/* End of turning on Backlight */
+
+	lcd_enabled = 1;
+	return 0;
+}
+
+static void thunder_disable_lcd(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(THUNDER_LCD_PANEL_ENVDD, 1);
+	gpio_set_value(THUNDER_LCD_PON, 0);
+	lcd_enabled = 0;
+}
+
+
+static int thunder_set_backlight ( struct omap_dss_device *dssdev, int level) 
+{
+	return 0;
+}
+
+static int thunder_get_backlight ( struct omap_dss_device *dssdev)
+{
+	return 10;
+}
+
+
+static struct omap_dss_device thunder_lcd_device = {
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.name			= "lcd",
+	.driver_name		= "panel-lg-lb043wq2",
+	.phy.dpi.data_lines	= 24,
+	.platform_enable	= thunder_enable_lcd,
+	.platform_disable	= thunder_disable_lcd,
+
+	.get_backlight  	= thunder_get_backlight,
+	.set_backlight 		= thunder_set_backlight,
+	.max_backlight_level    = 100,
+};
+
+static int thunder_enable_dvi(struct omap_dss_device *dssdev)
+{
+	if (lcd_enabled) {
+		printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
+		return -EINVAL;
+	}
+
+	gpio_set_value(THUNDER_DVI_PANEL_EN_GPIO, 1);
+	dvi_enabled = 1;
+
+	return 0;
+}
+
+static void thunder_disable_dvi(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(THUNDER_DVI_PANEL_EN_GPIO, 0);
+	dvi_enabled = 0;
+}
+
+static struct omap_dss_device thunder_dvi_device = {
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.name			= "dvi",
+	.driver_name		= "generic_panel",
+	.phy.dpi.data_lines	= 24,
+	.platform_enable	= thunder_enable_dvi,
+	.platform_disable	= thunder_disable_dvi,
+};
+
+static struct omap_dss_device *thunder_dss_devices[] = {
+	&thunder_lcd_device,
+	&thunder_dvi_device,
+};
+
+static struct omap_dss_board_info thunder_dss_data = {
+	.num_devices	= ARRAY_SIZE(thunder_dss_devices),
+	.devices	= thunder_dss_devices,
+	.default_device = &thunder_lcd_device,
+};
+
+static struct platform_device thunder_dss_device = {
+	.name		= "omapdss",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &thunder_dss_data,
+	},
+};
+
+static struct regulator_consumer_supply thunder_vdds_dsi_supply = {
+        .supply         = "vdds_dsi",
+        .dev            = &thunder_dss_device.dev,
+};
+
+static struct mtd_partition omap3thunder_nand_partitions[] = {
+	/* All the partition sizes are listed in terms of NAND block size */
+	{
+		.name		= "X-Loader",
+		.offset		= 0,
+		.size		= 4 * NAND_BLOCK_SIZE,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "U-Boot",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
+		.size		= 15 * NAND_BLOCK_SIZE,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "U-Boot Env",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x260000 */
+		.size		= 1 * NAND_BLOCK_SIZE,
+	},
+	{
+		.name		= "Kernel",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
+		.size		= 32 * NAND_BLOCK_SIZE,
+	},
+	{
+		.name		= "File System",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x680000 */
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct omap_nand_platform_data omap3thunder_nand_data = {
+	.options	= NAND_BUSWIDTH_16,
+	.parts		= omap3thunder_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(omap3thunder_nand_partitions),
+	.dma_channel	= -1,		/* disable DMA in OMAP NAND driver */
+	.nand_setup	= NULL,
+	.dev_ready	= NULL,
+};
+
+static struct resource omap3thunder_nand_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device omap3thunder_nand_device = {
+	.name		= "omap2-nand",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &omap3thunder_nand_data,
+	},
+	.num_resources	= 1,
+	.resource	= &omap3thunder_nand_resource,
+};
+
+#include "sdram-micron-mt46h32m32lf-6.h"
+
+static struct omap_uart_config omap3_thunder_uart_config __initdata = {
+	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct twl4030_usb_data thunder_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
+static struct twl4030_hsmmc_info mmc[] = {
+	{
+		.mmc		= 1,
+		.wires		= 8,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= 29, 
+	},
+	{ 
+		.mmc		= 2, 
+		.wires		= 4, 
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL, 
+		
+	}, 
+	{}	/* Terminator */
+};
+
+static struct regulator_consumer_supply thunder_vmmc1_supply = {
+	.supply			= "vmmc",
+};
+
+static struct regulator_consumer_supply thunder_vmmc2_supply = {
+        .supply                 = "vmmc",
+};
+
+
+static struct regulator_consumer_supply thunder_vsim_supply = {
+	.supply			= "vmmc_aux",
+};
+
+static struct gpio_led gpio_leds[] = {
+	{
+		.name			= "thunderboard::usr0",
+		.default_trigger        = "heartbeat",
+		.gpio			= -EINVAL,	/* gets replaced */
+		.active_low		= true,
+	},
+};
+
+static int thunder_twl_gpio_setup(struct device *dev,
+		unsigned gpio, unsigned ngpio)
+{
+	omap_mux_init_gpio(29,OMAP_PIN_INPUT);
+	mmc[0].gpio_cd = gpio + 0;
+	twl4030_mmc_init(mmc);
+
+	/* link regulators to MMC adapters */
+	thunder_vmmc1_supply.dev = mmc[0].dev; 
+	thunder_vmmc2_supply.dev = mmc[1].dev;
+	thunder_vsim_supply.dev = mmc[0].dev;
+	
+	/* the LED marked LED 2 (LEDA) */
+	gpio_leds[0].gpio = gpio + TWL4030_GPIO_MAX + 1;
+
+	/* gpio + 7 == DVI Enable */
+        gpio_request(gpio + 7, "EN_DVI");
+        gpio_direction_output(gpio + 7, 0);
+
+	return 0;
+}
+
+static struct twl4030_gpio_platform_data thunder_gpio_data = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES,
+	.irq_base	= TWL4030_GPIO_IRQ_BASE,
+	.irq_end	= TWL4030_GPIO_IRQ_END,
+	.use_leds	= false,
+	.pullups	= BIT(1),
+	.pulldowns	= BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
+				| BIT(15) | BIT(16) | BIT(17),
+	.setup		= thunder_twl_gpio_setup,
+};
+
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data thunder_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &thunder_vmmc1_supply,
+};
+
+
+static struct regulator_init_data thunder_vmmc2 = {
+        .constraints = {
+                .min_uV                 = 1850000,
+		.max_uV			= 3150000, 
+                .apply_uV               = true,
+                .valid_modes_mask       = REGULATOR_MODE_NORMAL
+                                        | REGULATOR_MODE_STANDBY,
+                .valid_ops_mask         = REGULATOR_CHANGE_MODE
+                                        | REGULATOR_CHANGE_STATUS,
+        },
+        .num_consumer_supplies  = 1,
+        .consumer_supplies      = &thunder_vmmc2_supply,
+};
+
+/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
+static struct regulator_init_data thunder_vsim = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 3000000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &thunder_vsim_supply,
+};
+
+static struct regulator_consumer_supply thunder_vdda_dac_supply = {
+        .supply         = "vdda_dac",
+        .dev            = &thunder_dss_device.dev,
+};
+
+
+/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
+static struct regulator_init_data thunder_vdac = {
+    .constraints = {
+        .min_uV         = 1800000,
+        .max_uV         = 1800000,
+        .apply_uV       = true,
+        .valid_modes_mask   = REGULATOR_MODE_NORMAL
+                    | REGULATOR_MODE_STANDBY,
+        .valid_ops_mask     = REGULATOR_CHANGE_MODE
+                    | REGULATOR_CHANGE_STATUS,
+    },
+    .num_consumer_supplies  = 1,
+    .consumer_supplies  = &thunder_vdda_dac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_init_data thunder_vpll2 = {
+    .constraints = {
+        .name           = "VDVI",
+        .min_uV         = 1800000,
+        .max_uV         = 1800000,        
+	.valid_modes_mask   = REGULATOR_MODE_NORMAL
+                    | REGULATOR_MODE_STANDBY,
+        .valid_ops_mask     = REGULATOR_CHANGE_MODE
+                    | REGULATOR_CHANGE_STATUS,
+    },
+    .num_consumer_supplies  = 1,
+    .consumer_supplies  = &thunder_vdds_dsi_supply,
+};
+
+
+
+static struct twl4030_platform_data thunder_twldata = {
+	.irq_base	= TWL4030_IRQ_BASE,
+	.irq_end	= TWL4030_IRQ_END,
+
+	/* platform_data for children goes here */
+	.usb		= &thunder_usb_data,
+	.gpio		= &thunder_gpio_data,
+	.vmmc1		= &thunder_vmmc1, 
+	.vmmc2          = &thunder_vmmc2,
+	.vsim		= &thunder_vsim,
+	.vdac       	= &thunder_vdac,
+	.vpll2          = &thunder_vpll2,
+};
+
+static struct i2c_board_info __initdata thunder_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("twl4030", 0x48),
+		.flags = I2C_CLIENT_WAKE,
+		.irq = INT_34XX_SYS_NIRQ,
+		.platform_data = &thunder_twldata,
+	},
+};
+
+static int __init omap3_thunder_i2c_init(void)
+{
+	omap_register_i2c_bus(1, 2600, thunder_i2c_boardinfo, ARRAY_SIZE(thunder_i2c_boardinfo));
+	omap_register_i2c_bus(2, 100,NULL, 0);
+	omap_register_i2c_bus(3, 100, NULL, 0);
+	return 0;
+}
+
+static void __init omap3_thunder_init_irq(void)
+{
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_led_info,
+	},
+};
+
+static struct gpio_keys_button gpio_buttons[] = {
+	{
+		.code			= BTN_EXTRA,
+		.gpio			= 7,
+		.desc			= "user",
+		.wakeup			= 1,
+	},
+};
+
+static struct gpio_keys_platform_data gpio_key_info = {
+	.buttons	= gpio_buttons,
+	.nbuttons	= ARRAY_SIZE(gpio_buttons),
+};
+
+static struct platform_device keys_gpio = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_key_info,
+	},
+};
+
+static void ads7846_dev_init(void)
+{
+	if (gpio_request(OMAP3_THUNDER_TS_GPIO, "ADS7846 pendown") < 0)
+		printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
+
+	gpio_direction_input(OMAP3_THUNDER_TS_GPIO);
+
+	omap_set_gpio_debounce(OMAP3_THUNDER_TS_GPIO, 1);
+	omap_set_gpio_debounce_time(OMAP3_THUNDER_TS_GPIO, 0xa);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+	return !gpio_get_value(OMAP3_THUNDER_TS_GPIO);
+}
+
+struct ads7846_platform_data ads7846_config = {
+	.x_max                  = 0x0fff,
+	.y_max                  = 0x0fff,
+	.x_plate_ohms           = 180,
+	.pressure_max           = 255,
+	.debounce_max           = 10,
+	.debounce_tol           = 3,
+	.debounce_rep           = 1,
+	.get_pendown_state	= ads7846_get_pendown_state,
+	.keep_vref_on		= 1,
+	.settle_delay_usecs     = 150,
+};
+
+
+static struct omap2_mcspi_device_config ads7846_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel	= 1,  /* 0: slave, 1: master */
+};
+
+
+struct spi_board_info omap3thunder_spi_board_touch[] = {
+	 {
+		.modalias		= "ads7846",
+		.bus_num		= 1,
+		.chip_select		= 0,
+		.max_speed_hz		= 1500000,
+		.controller_data	= &ads7846_mcspi_config,
+		.irq			= OMAP_GPIO_IRQ(OMAP3_THUNDER_TS_GPIO),
+		.platform_data		= &ads7846_config,
+	}, 
+};
+
+
+/* G-sensor on SPI bus 4 */
+static struct spi_board_info omap3thunder_spi_board_info[] = {
+	{
+		.modalias = "spidev", 
+		.max_speed_hz   = 1500000, 
+                .bus_num        = 4,
+                .chip_select    = 0,
+                .mode = SPI_MODE_0,
+        },
+};
+
+static struct omap_board_config_kernel omap3_thunder_config[] __initdata = {
+};
+
+static struct platform_device *omap3_thunder_devices[] __initdata = {
+	&thunder_dss_device,
+	&leds_gpio,
+	&keys_gpio,
+};
+
+static void __init omap3thunder_flash_init(void)
+{
+	u8 cs = 0;
+	u8 nandcs = GPMC_CS_NUM + 1;
+
+	u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
+
+	/* find out the chip-select on which NAND exists */
+	while (cs < GPMC_CS_NUM) {
+		u32 ret = 0;
+		ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+
+		if ((ret & 0xC00) == 0x800) {
+			printk(KERN_INFO "Found NAND on CS%d\n", cs);
+			if (nandcs > GPMC_CS_NUM)
+				nandcs = cs;
+		}
+		cs++;
+	}
+
+	if (nandcs > GPMC_CS_NUM) {
+		printk(KERN_INFO "NAND: Unable to find configuration "
+				 "in GPMC\n ");
+		return;
+	}
+
+	if (nandcs < GPMC_CS_NUM) {
+		omap3thunder_nand_data.cs = nandcs;
+		omap3thunder_nand_data.gpmc_cs_baseaddr = (void *)
+			(gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
+		omap3thunder_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add);
+
+		printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
+		if (platform_device_register(&omap3thunder_nand_device) < 0)
+			printk(KERN_ERR "Unable to register NAND device\n");
+	}
+}
+
+
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+        .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+        .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+        .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+        .phy_reset  = false,
+        .reset_gpio_port[0]  = -EINVAL,
+        .reset_gpio_port[1]  = 162, 
+        .reset_gpio_port[2]  = -EINVAL
+};
+
+static void __init omap3_thunder_init(void)
+{
+	omap3_thunder_i2c_init();
+	
+	/* Turn on Wireless LAN */
+        gpio_request( 157 , "WIFI ENABLE");
+        gpio_direction_output( 157, 0);	
+
+	platform_add_devices(omap3_thunder_devices,
+			ARRAY_SIZE(omap3_thunder_devices));
+	omap_board_config = omap3_thunder_config;
+	omap_board_config_size = ARRAY_SIZE(omap3_thunder_config);
+	omap_serial_init();
+
+	usb_musb_init();
+	usb_ehci_init(&ehci_pdata);
+	omap3thunder_flash_init();
+
+	ads7846_dev_init();
+	spi_register_board_info(omap3thunder_spi_board_touch, ARRAY_SIZE(omap3thunder_spi_board_touch));
+	spi_register_board_info(omap3thunder_spi_board_info, ARRAY_SIZE(omap3thunder_spi_board_info));	
+
+	thunder_display_init();
+}
+
+static void __init omap3_thunder_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap2_map_common_io();
+}
+
+MACHINE_START(OMAP3_THUNDER, "OMAP3 Thunder Board")
+	/* Maintainer: Daniel Toussaint daniel.toussaint@technexion.com */
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap3_thunder_map_io,
+	.init_irq	= omap3_thunder_init_irq,
+	.init_machine	= omap3_thunder_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/drivers/video/omap2/displays/Kconfig b/drivers/video/omap2/displays/Kconfig
index 79d2861..a831fff 100644
--- a/drivers/video/omap2/displays/Kconfig
+++ b/drivers/video/omap2/displays/Kconfig
@@ -25,4 +25,11 @@ config PANEL_TAAL
         help
           Taal DSI command mode panel from TPO.
 
+config PANEL_LG_LB043WQ2
+        tristate "LG LB043WQ2 Panel"
+        depends on OMAP2_DSS
+        help
+                LG LB043WQ2 Panel on Thunder board
+
+
 endmenu
diff --git a/drivers/video/omap2/displays/Makefile b/drivers/video/omap2/displays/Makefile
index d44e765..ae0c956 100644
--- a/drivers/video/omap2/displays/Makefile
+++ b/drivers/video/omap2/displays/Makefile
@@ -3,3 +3,5 @@ obj-$(CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C) += panel-samsung-lte430wq-f0c.o
 obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
 
 obj-$(CONFIG_PANEL_TAAL) += panel-taal.o
+obj-$(CONFIG_PANEL_LG_LB043WQ2) += panel-lg-lb043wq2.o
+
diff --git a/drivers/video/omap2/displays/panel-lg-lb043wq2.c b/drivers/video/omap2/displays/panel-lg-lb043wq2.c
new file mode 100644
index 0000000..57a74f6
--- /dev/null
+++ b/drivers/video/omap2/displays/panel-lg-lb043wq2.c
@@ -0,0 +1,118 @@
+/*
+ * LCD panel driver for LG LB043WQ2 panel 
+ * 
+ * Daniel Toussaint <daniel.toussaint@technexion.com>
+ *
+ * Modified from Sharp LS037V7DW01 
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+
+#include <linux/module.h>
+#include <linux/delay.h>
+
+#include <plat/display.h>
+
+static struct omap_video_timings lg_lb043wq2_timings = {
+	.x_res = 480,
+	.y_res = 272,
+
+	.hsw            = 41,
+        .hfp            = 8,
+        .hbp            = 45-41,
+
+        .vsw            = 10,
+        .vfp            = 4,
+        .vbp            = 12-10,
+
+
+	.pixel_clock	= 8000,
+
+};
+
+static int lg_lb043wq2_panel_probe(struct omap_dss_device *dssdev)
+{
+	dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
+		OMAP_DSS_LCD_IHS;
+	dssdev->panel.timings = lg_lb043wq2_timings;
+
+	return 0;
+}
+
+static void lg_lb043wq2_panel_remove(struct omap_dss_device *dssdev)
+{
+}
+
+static int lg_lb043wq2_panel_enable(struct omap_dss_device *dssdev)
+{
+	int r = 0;
+
+	/* wait couple of vsyncs until enabling the LCD */
+	msleep(50);
+
+	if (dssdev->platform_enable)
+		r = dssdev->platform_enable(dssdev);
+
+	return r;
+}
+
+static void lg_lb043wq2_panel_disable(struct omap_dss_device *dssdev)
+{
+	if (dssdev->platform_disable)
+		dssdev->platform_disable(dssdev);
+
+	/* wait at least 5 vsyncs after disabling the LCD */
+
+	msleep(100);
+}
+
+static int lg_lb043wq2_panel_suspend(struct omap_dss_device *dssdev)
+{
+	lg_lb043wq2_panel_disable(dssdev);
+	return 0;
+}
+
+static int lg_lb043wq2_panel_resume(struct omap_dss_device *dssdev)
+{
+	return lg_lb043wq2_panel_enable(dssdev);
+}
+
+static struct omap_dss_driver lg_lb043wq2_driver = {
+	.probe		= lg_lb043wq2_panel_probe,
+	.remove		= lg_lb043wq2_panel_remove,
+
+	.enable		= lg_lb043wq2_panel_enable,
+	.disable	= lg_lb043wq2_panel_disable,
+	.suspend	= lg_lb043wq2_panel_suspend,
+	.resume		= lg_lb043wq2_panel_resume,
+
+	.driver         = {
+		.name   = "panel-lg-lb043wq2",
+		.owner  = THIS_MODULE,
+	},
+};
+
+static int __init lg_lb043wq2_panel_drv_init(void)
+{
+	return omap_dss_register_driver(&lg_lb043wq2_driver);
+}
+
+static void __exit lg_lb043wq2_panel_drv_exit(void)
+{
+	omap_dss_unregister_driver(&lg_lb043wq2_driver);
+}
+
+module_init(lg_lb043wq2_panel_drv_init);
+module_exit(lg_lb043wq2_panel_drv_exit);
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig
index 61952aa..2f6c6ae 100644
--- a/sound/soc/omap/Kconfig
+++ b/sound/soc/omap/Kconfig
@@ -116,3 +116,13 @@ config SND_OMAP_SOC_IGEP0020
 	select SND_SOC_TWL4030
 	help
 	  Say Y if you want to add support for Soc audio on IGEP v2 board.
+
+config SND_OMAP_SOC_OMAP3_THUNDER
+        tristate "SoC Audio support for OMAP3 Thunder"
+        depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3_THUNDER
+        select SND_OMAP_SOC_MCBSP
+        select SND_SOC_TWL4030
+        help
+          Say Y if you want to add support for SoC audio on the Thunder Board.
+
+
diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile
index d49458a..08c0918 100644
--- a/sound/soc/omap/Makefile
+++ b/sound/soc/omap/Makefile
@@ -18,6 +18,7 @@ snd-soc-omap3pandora-objs := omap3pandora.o
 snd-soc-omap3beagle-objs := omap3beagle.o
 snd-soc-zoom2-objs := zoom2.o
 snd-soc-igep0020-objs := igep0020.o
+snd-soc-omap3thunder-objs := omap3thunder.o
 
 obj-$(CONFIG_SND_OMAP_SOC_N810) += snd-soc-n810.o
 obj-$(CONFIG_SND_OMAP_SOC_AMS_DELTA) += snd-soc-ams-delta.o
@@ -31,3 +32,5 @@ obj-$(CONFIG_SND_OMAP_SOC_OMAP3_PANDORA) += snd-soc-omap3pandora.o
 obj-$(CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE) += snd-soc-omap3beagle.o
 obj-$(CONFIG_SND_OMAP_SOC_ZOOM2) += snd-soc-zoom2.o
 obj-$(CONFIG_SND_OMAP_SOC_IGEP0020) += snd-soc-igep0020.o
+obj-$(CONFIG_SND_OMAP_SOC_OMAP3_THUNDER) += snd-soc-omap3thunder.o
+
diff --git a/sound/soc/omap/omap3thunder.c b/sound/soc/omap/omap3thunder.c
new file mode 100644
index 0000000..cd91dff
--- /dev/null
+++ b/sound/soc/omap/omap3thunder.c
@@ -0,0 +1,160 @@
+/*
+ * omap3 audio support for Technexion Thunder boards. 
+ * Modified from omap3beagle.c 
+ * Daniel Toussaint <daniel.toussaint@technexion.com> 
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <asm/mach-types.h>
+#include <plat/hardware.h>
+#include <plat/gpio.h>
+#include <plat/mcbsp.h>
+
+#include "omap-mcbsp.h"
+#include "omap-pcm.h"
+#include "../codecs/twl4030.h"
+
+static int omap3thunder_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	unsigned int fmt;
+	int ret;
+
+	switch (params_channels(params)) {
+	case 2: /* Stereo I2S mode */
+		fmt =	SND_SOC_DAIFMT_I2S |
+			SND_SOC_DAIFMT_NB_NF |
+			SND_SOC_DAIFMT_CBM_CFM;
+		break;
+	case 4: /* Four channel TDM mode */
+		fmt =	SND_SOC_DAIFMT_DSP_A |
+			SND_SOC_DAIFMT_IB_NF |
+			SND_SOC_DAIFMT_CBM_CFM;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Set codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai, fmt);
+	if (ret < 0) {
+		printk(KERN_ERR "can't set codec DAI configuration\n");
+		return ret;
+	}
+
+	/* Set cpu DAI configuration */
+	ret = snd_soc_dai_set_fmt(cpu_dai, fmt);
+	if (ret < 0) {
+		printk(KERN_ERR "can't set cpu DAI configuration\n");
+		return ret;
+	}
+
+	/* Set the codec system clock for DAC and ADC */
+	ret = snd_soc_dai_set_sysclk(codec_dai, 0, 26000000,
+				     SND_SOC_CLOCK_IN);
+	if (ret < 0) {
+		printk(KERN_ERR "can't set codec system clock\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct snd_soc_ops omap3thunder_ops = {
+	.hw_params = omap3thunder_hw_params,
+};
+
+/* Digital audio interface glue - connects codec <--> CPU */
+static struct snd_soc_dai_link omap3thunder_dai = {
+	.name = "TWL4030",
+	.stream_name = "TWL4030",
+	.cpu_dai = &omap_mcbsp_dai[0],
+	.codec_dai = &twl4030_dai[TWL4030_DAI_HIFI],
+	.ops = &omap3thunder_ops,
+};
+
+/* Audio machine driver */
+static struct snd_soc_card snd_soc_omap3thunder = {
+	.name = "omap3thunder",
+	.platform = &omap_soc_platform,
+	.dai_link = &omap3thunder_dai,
+	.num_links = 1,
+};
+
+/* Audio subsystem */
+static struct snd_soc_device omap3thunder_snd_devdata = {
+	.card = &snd_soc_omap3thunder,
+	.codec_dev = &soc_codec_dev_twl4030,
+};
+
+static struct platform_device *omap3thunder_snd_device;
+
+static int __init omap3thunder_soc_init(void)
+{
+	int ret;
+
+	if (!machine_is_omap3_thunder()) {
+		pr_debug("Not OMAP3 thunder!\n");
+		return -ENODEV;
+	}
+	pr_info("OMAP3 thunder SoC init\n");
+
+	omap3thunder_snd_device = platform_device_alloc("soc-audio", -1);
+	if (!omap3thunder_snd_device) {
+		printk(KERN_ERR "Platform device allocation failed\n");
+		return -ENOMEM;
+	}
+
+	platform_set_drvdata(omap3thunder_snd_device, &omap3thunder_snd_devdata);
+	omap3thunder_snd_devdata.dev = &omap3thunder_snd_device->dev;
+	*(unsigned int *)omap3thunder_dai.cpu_dai->private_data = 1; /* McBSP2 */
+
+	ret = platform_device_add(omap3thunder_snd_device);
+	if (ret)
+		goto err1;
+
+	return 0;
+
+err1:
+	printk(KERN_ERR "Unable to add platform device\n");
+	platform_device_put(omap3thunder_snd_device);
+
+	return ret;
+}
+
+static void __exit omap3thunder_soc_exit(void)
+{
+	platform_device_unregister(omap3thunder_snd_device);
+}
+
+module_init(omap3thunder_soc_init);
+module_exit(omap3thunder_soc_exit);
+
+MODULE_AUTHOR("Steve Sakoman <steve@sakoman.com>");
+MODULE_DESCRIPTION("ALSA SoC OMAP3 thunder");
+MODULE_LICENSE("GPL");