All of lore.kernel.org
 help / color / mirror / Atom feed
From: Yinghai Lu <yinghai@kernel.org>
To: Ingo Molnar <mingo@elte.hu>,
	Jesse Barnes <jbarnes@virtuousgeek.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	"H. Peter Anvin" <hpa@zytor.com>,
	Andrew Morton <akpm@linux-foundation.org>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
	Gertjan van Wingerde <gwingerde@gmail.com>
Subject: [PATCH 6/7] x86/pci: enable pci root res read out for 32bit too
Date: Fri, 11 Dec 2009 15:35:41 -0800	[thread overview]
Message-ID: <4B22D74D.4020201@kernel.org> (raw)
In-Reply-To: <4B22D4DA.2000104@kernel.org>


should be good for 32bit too.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>

---
 arch/x86/pci/Makefile   |    3 +--
 arch/x86/pci/amd_bus.c  |   17 +++--------------
 arch/x86/pci/bus_numa.h |    4 ++--
 arch/x86/pci/i386.c     |    4 ----
 4 files changed, 6 insertions(+), 22 deletions(-)

Index: linux-2.6/arch/x86/pci/Makefile
===================================================================
--- linux-2.6.orig/arch/x86/pci/Makefile
+++ linux-2.6/arch/x86/pci/Makefile
@@ -14,8 +14,7 @@ obj-$(CONFIG_X86_VISWS)		+= visws.o
 obj-$(CONFIG_X86_NUMAQ)		+= numaq_32.o
 
 obj-y				+= common.o early.o
-obj-y				+= amd_bus.o
-obj-$(CONFIG_X86_64)		+= bus_numa.o intel_bus.o
+obj-y				+= amd_bus.o bus_numa.o intel_bus.o
 
 ifeq ($(CONFIG_PCI_DEBUG),y)
 EXTRA_CFLAGS += -DDEBUG
Index: linux-2.6/arch/x86/pci/amd_bus.c
===================================================================
--- linux-2.6.orig/arch/x86/pci/amd_bus.c
+++ linux-2.6/arch/x86/pci/amd_bus.c
@@ -6,9 +6,7 @@
 
 #include <asm/pci_x86.h>
 
-#ifdef CONFIG_X86_64
 #include <asm/pci-direct.h>
-#endif
 
 #include "bus_numa.h"
 
@@ -17,8 +15,6 @@
  * also get peer root bus resource for io,mmio
  */
 
-#ifdef CONFIG_X86_64
-
 struct pci_hostbridge_probe {
 	u32 bus;
 	u32 slot;
@@ -207,7 +203,7 @@ static int __init early_fill_mp_bus_info
 	address = MSR_K8_TOP_MEM1;
 	rdmsrl(address, val);
 	end = (val & 0xffffff800000ULL);
-	printk(KERN_INFO "TOM: %016lx aka %ldM\n", end, end>>20);
+	printk(KERN_INFO "TOM: %016llx aka %lldM\n", (u64)end, (u64)end>>20);
 	if (end < (1ULL<<32))
 		subtract_range(range, RANGE_NUM, 0, end - 1);
 
@@ -301,7 +297,8 @@ static int __init early_fill_mp_bus_info
 		address = MSR_K8_TOP_MEM2;
 		rdmsrl(address, val);
 		end = (val & 0xffffff800000ULL);
-		printk(KERN_INFO "TOM2: %016lx aka %ldM\n", end, end>>20);
+		printk(KERN_INFO "TOM2: %016llx aka %lldM\n", (u64)end,
+							 (u64)end>>20);
 		subtract_range(range, RANGE_NUM, 1ULL<<32, end - 1);
 	}
 
@@ -347,14 +344,6 @@ static int __init early_fill_mp_bus_info
 	return 0;
 }
 
-#else  /* !CONFIG_X86_64 */
-
-static int __init early_fill_mp_bus_info(void) { return 0; }
-
-#endif /* !CONFIG_X86_64 */
-
-/* common 32/64 bit code */
-
 #define ENABLE_CF8_EXT_CFG      (1ULL << 46)
 
 static void enable_pci_io_ecs(void *unused)
Index: linux-2.6/arch/x86/pci/i386.c
===================================================================
--- linux-2.6.orig/arch/x86/pci/i386.c
+++ linux-2.6/arch/x86/pci/i386.c
@@ -257,10 +257,6 @@ void __init pcibios_resource_survey(void
  */
 fs_initcall(pcibios_assign_resources);
 
-void __weak x86_pci_root_bus_res_quirks(struct pci_bus *b)
-{
-}
-
 /*
  *  If we set up a device for bus mastering, we need to check the latency
  *  timer as certain crappy BIOSes forget to set it properly.
Index: linux-2.6/arch/x86/pci/bus_numa.h
===================================================================
--- linux-2.6.orig/arch/x86/pci/bus_numa.h
+++ linux-2.6/arch/x86/pci/bus_numa.h
@@ -1,5 +1,5 @@
-#ifdef CONFIG_X86_64
-
+#ifndef __BUS_NUMA_H
+#define __BUS_NUMA_H
 /*
  * sub bus (transparent) will use entres from 3 to store extra from
  * root, so need to make sure we have enough slot there, Should we



  parent reply	other threads:[~2009-12-11 23:41 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <4B22D4DA.2000104@kernel.org>
2009-12-11 23:35 ` [PATCH 2/7] x86/range: check range in update range Yinghai Lu
2009-12-11 23:35 ` [PATCH 3/7] x86/pci: use resource_size_t in update_res Yinghai Lu
2009-12-11 23:35 ` [PATCH 4/7] x86/pci: amd one chain system to use pci read out res Yinghai Lu
2009-12-11 23:35 ` [PATCH 5/7] x86/pci: use u64 instead of size_t in amd_bus.c Yinghai Lu
2009-12-11 23:55   ` H. Peter Anvin
2009-12-12  0:42     ` Yinghai Lu
2009-12-12  2:10   ` [PATCH 5/7] x86/pci: use u64 instead of size_t in amd_bus.c -v2 Yinghai Lu
2009-12-11 23:35 ` Yinghai Lu [this message]
2009-12-12  2:11   ` [PATCH 61/7] x86/pci: add cap_4g Yinghai Lu
2009-12-12  2:16     ` H. Peter Anvin
2009-12-12  2:20       ` Yinghai Lu
2009-12-12  2:25         ` H. Peter Anvin
2009-12-12  3:29           ` [PATCH 61/7] x86/pci: add cap_resource -v2 Yinghai Lu
2009-12-12  2:13   ` [PATCH 6/7] x86/pci: enable pci root res read out for 32bit too -v2 Yinghai Lu
2009-12-12  3:28     ` [PATCH 6/7] x86/pci: enable pci root res read out for 32bit too -v3 Yinghai Lu
2009-12-11 23:35 ` [PATCH 7/7] x86: increase MAX_EARLY_RES Yinghai Lu
2009-12-15  2:06   ` [PATCH 1/3] x86: call early_res_to_bootmem one time Yinghai Lu
2009-12-15  2:07     ` [PATCH 2/3] x86: introduce max_early_res and early_res_count Yinghai Lu
2009-12-15  2:08       ` [PATCH 3/3] x86: dynamic increase early_res array size Yinghai Lu
2009-12-16  1:11         ` [PATCH 4/3] x86: make early_node_mem get mem > 4g if possible -v2 Yinghai Lu
2009-12-17  1:01   ` [tip:x86/urgent] x86: Increase MAX_EARLY_RES; insufficient on 32-bit NUMA tip-bot for Yinghai Lu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4B22D74D.4020201@kernel.org \
    --to=yinghai@kernel.org \
    --cc=akpm@linux-foundation.org \
    --cc=gwingerde@gmail.com \
    --cc=hpa@zytor.com \
    --cc=jbarnes@virtuousgeek.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=mingo@elte.hu \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.