All of lore.kernel.org
 help / color / mirror / Atom feed
From: Darius Augulis <augulis.darius@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: "Ira W. Snyder" <iws@ovro.caltech.edu>, linux-serial@vger.kernel.org
Subject: Re: [PATCH] 8250_pci: add support for MCS9865 / SYBA 6x Serial Port Card
Date: Mon, 14 Dec 2009 11:25:08 +0200	[thread overview]
Message-ID: <4B260474.2010608@gmail.com> (raw)
In-Reply-To: <20091204222415.GB2816@ovro.caltech.edu>

hi community!

can anybody ack this simple patch and merge it to 2.6.33-rc1 ?
I still waiting for this half year!

Darius A.


On 12/05/2009 12:24 AM, Ira W. Snyder wrote:
> This patch is heavily based on an earlier patch found on the linux-serial
> mailing list [1], written by Darius Augulis.
>
> The previous incarnation of this patch only supported a 2x serial port
> card. I have added support for my SYBA 6x serial port card, and tested on
> x86.
>
> [1]: http://marc.info/?l=linux-serial&m=124975806304760
>
> Signed-off-by: Ira W. Snyder<iws@ovro.caltech.edu>
> Cc: Darius Augulis<augulis.darius@gmail.com>
> Cc: linux-serial@vger.kernel.org
> ---
>
> According to MAINTAINERS the 8250/16550 support currently lacks a
> maintainer. The earlier incarnation of this patch was posted all the way
> back in August.
>
> If necessary, I can post an incremental patch from the Darius' earlier
> patch. It would be great if someone could pick it up. I hate when new
> hardware doesn't work, especially something as simple as this.
>
>   drivers/parport/parport_pc.c |    6 ++++++
>   drivers/serial/8250_pci.c    |   22 +++++++++++++++++++++-
>   include/linux/pci_ids.h      |    1 +
>   3 files changed, 28 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
> index 2597145..85204f0 100644
> --- a/drivers/parport/parport_pc.c
> +++ b/drivers/parport/parport_pc.c
> @@ -2908,6 +2908,7 @@ enum parport_pc_pci_cards {
>   	netmos_9805,
>   	netmos_9815,
>   	netmos_9901,
> +	netmos_9865,
>   	quatech_sppxp100,
>   };
>
> @@ -2989,6 +2990,7 @@ static struct parport_pc_pci {
>   	/* netmos_9805 */               { 1, { { 0, -1 }, } },
>   	/* netmos_9815 */               { 2, { { 0, -1 }, { 2, -1 }, } },
>   	/* netmos_9901 */               { 1, { { 0, -1 }, } },
> +	/* netmos_9865 */               { 1, { { 0, -1 }, } },
>   	/* quatech_sppxp100 */		{ 1, { { 0, 1 }, } },
>   };
>
> @@ -3092,6 +3094,10 @@ static const struct pci_device_id parport_pc_pci_tbl[] = {
>   	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9815 },
>   	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901,
>   	  0xA000, 0x2000, 0, 0, netmos_9901 },
> +	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
> +	  0xA000, 0x1000, 0, 0, netmos_9865 },
> +	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
> +	  0xA000, 0x2000, 0, 0, netmos_9865 },
>   	/* Quatech SPPXP-100 Parallel port PCI ExpressCard */
>   	{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SPPXP_100,
>   	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, quatech_sppxp100 },
> diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
> index b28af13..8b18c3c 100644
> --- a/drivers/serial/8250_pci.c
> +++ b/drivers/serial/8250_pci.c
> @@ -760,7 +760,8 @@ static int pci_netmos_init(struct pci_dev *dev)
>   	/* subdevice 0x00PS means<P>  parallel,<S>  serial */
>   	unsigned int num_serial = dev->subsystem_device&  0xf;
>
> -	if (dev->device == PCI_DEVICE_ID_NETMOS_9901)
> +	if ((dev->device == PCI_DEVICE_ID_NETMOS_9901) ||
> +		(dev->device == PCI_DEVICE_ID_NETMOS_9865))
>   		return 0;
>   	if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM&&
>   			dev->subsystem_device == 0x0299)
> @@ -1479,6 +1480,7 @@ enum pci_board_num_t {
>
>   	pbn_b0_bt_1_115200,
>   	pbn_b0_bt_2_115200,
> +	pbn_b0_bt_4_115200,
>   	pbn_b0_bt_8_115200,
>
>   	pbn_b0_bt_1_460800,
> @@ -1703,6 +1705,12 @@ static struct pciserial_board pci_boards[] __devinitdata = {
>   		.base_baud	= 115200,
>   		.uart_offset	= 8,
>   	},
> +	[pbn_b0_bt_4_115200] = {
> +		.flags		= FL_BASE0|FL_BASE_BARS,
> +		.num_ports	= 4,
> +		.base_baud	= 115200,
> +		.uart_offset	= 8,
> +	},
>   	[pbn_b0_bt_8_115200] = {
>   		.flags		= FL_BASE0|FL_BASE_BARS,
>   		.num_ports	= 8,
> @@ -3649,6 +3657,18 @@ static struct pci_device_id serial_pci_tbl[] = {
>   		0, 0, pbn_b0_1_115200 },
>
>   	/*
> +	 * Best Connectivity PCI Multi I/O cards
> +	 */
> +
> +	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
> +		0xA000, 0x1000,
> +		0, 0, pbn_b0_1_115200 },
> +
> +	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
> +		0xA000, 0x3004,
> +		0, 0, pbn_b0_bt_4_115200 },
> +
> +	/*
>   	 * These entries match devices with class COMMUNICATION_SERIAL,
>   	 * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
>   	 */
> diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
> index 84cf1f3..b2c0bf3 100644
> --- a/include/linux/pci_ids.h
> +++ b/include/linux/pci_ids.h
> @@ -2675,6 +2675,7 @@
>   #define PCI_DEVICE_ID_NETMOS_9835	0x9835
>   #define PCI_DEVICE_ID_NETMOS_9845	0x9845
>   #define PCI_DEVICE_ID_NETMOS_9855	0x9855
> +#define PCI_DEVICE_ID_NETMOS_9865	0x9865
>   #define PCI_DEVICE_ID_NETMOS_9901	0x9901
>
>   #define PCI_VENDOR_ID_3COM_2		0xa727

  reply	other threads:[~2009-12-14  9:25 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-12-04 22:24 [PATCH] 8250_pci: add support for MCS9865 / SYBA 6x Serial Port Card Ira W. Snyder
2009-12-14  9:25 ` Darius Augulis [this message]
2009-12-16 16:49   ` Ira W. Snyder

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4B260474.2010608@gmail.com \
    --to=augulis.darius@gmail.com \
    --cc=iws@ovro.caltech.edu \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.