[U-Boot] Problem with transparent PCI-PCI bridge on Canyonlands

[Felix Radensky <felix@embedded-sol.com>]

Hi, Stefan

Stefan Roese wrote:
> Felix,
>
> On Tuesday 15 December 2009 08:30:26 Felix Radensky wrote:
>   
>> Can I do anything else to help you identify the problem ?
>>     
>
> Do you have other PPC4xx boards, in which you could test this PCI-PCI bridge 
> board?
>   

No, I don't.

> Some other comments below.
>  
>   
>> Thanks.
>>
>> Felix.
>>
>> Felix Radensky wrote:
>>     
>>> Hi,
>>>
>>> Feng Kan wrote:
>>>       
>>>> Can you turn on the additional debug information. That will give a
>>>> better
>>>> Clue as to what part is hanging.
>>>>         
>>> I've enabled debugging in drivers/pci/pci.c. I'm seeing an infinite flow
>>> of messages
>>>
>>> PCI:   Bus Dev VenId DevId Class Int
>>> PCI Scan: Found Bus 0, Device 6, Function 0
>>> PCI Scan: Found Bus 1, Device 6, Function 0
>>> ...
>>> PCI Scan: Found Bus 255, Device 6, Function 0
>>> PCI Scan: Found Bus 0, Device 6, Function 0
>>> PCI Scan: Found Bus 1, Device 6, Function 0
>>> ...
>>>       
>
> Strange to see an infinite loop here. I suggest you debug, why 
> pci_hose_scan_bus() is called endlessly. Hard to guess without access to such 
> a board.
>   

OK, thanks. I'll look into it.

Felix.