All of lore.kernel.org
 help / color / mirror / Atom feed
From: Semih Hazar <semih.hazar@indefia.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] macb: Fix mii_phy_read and mii_phy_write functions
Date: Thu, 17 Dec 2009 15:07:15 +0200	[thread overview]
Message-ID: <4B2A2D03.3000407@indefia.com> (raw)


Enabling CONFIG_CMD_MII in AVR32 boards was not possible due to
compile errors.

This patch fixes miiphy_read and miiphy_write functions and
registers them properly.

Signed-off-by: Semih Hazar <semih.hazar@indefia.com>
---
 drivers/net/macb.c |  110 +++++++++++++++------------------------------------
 1 files changed, 33 insertions(+), 77 deletions(-)

diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 6de0a04..c74bee5 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -42,6 +42,7 @@
 #include <net.h>
 #include <netdev.h>
 #include <malloc.h>
+#include <miiphy.h>
 
 #include <linux/mii.h>
 #include <asm/io.h>
@@ -164,6 +165,36 @@ static u16 macb_mdio_read(struct macb_device *macb, u8 reg)
 	return MACB_BFEXT(DATA, frame);
 }
 
+#if defined(CONFIG_CMD_MII)
+
+int macb_miiphy_read(char *devname, u8 phy_adr, u8 reg, u16 *value)
+{
+	struct eth_device *dev = eth_get_dev_by_name(devname);
+	struct macb_device *macb = to_macb(dev);
+
+	if ( macb->phy_addr != phy_adr )
+		return -1;
+	
+	*value = macb_mdio_read(macb, reg);
+
+	return 0;
+}
+
+int macb_miiphy_write(char *devname, u8 phy_adr, u8 reg, u16 value)
+{
+	struct eth_device *dev = eth_get_dev_by_name(devname);
+	struct macb_device *macb = to_macb(dev);
+
+	if ( macb->phy_addr != phy_adr )
+		return -1;
+
+	macb_mdio_write(macb, reg, value);
+
+	return 0;
+}
+#endif
+
+
 #if defined(CONFIG_CMD_NET)
 
 static int macb_send(struct eth_device *netdev, volatile void *packet,
@@ -540,84 +571,9 @@ int macb_eth_initialize(int id, void *regs, unsigned int phy_addr)
 
 	eth_register(netdev);
 
-	return 0;
-}
-
-#endif
-
 #if defined(CONFIG_CMD_MII)
-
-int miiphy_read(unsigned char addr, unsigned char reg, unsigned short *value)
-{
-	unsigned long netctl;
-	unsigned long netstat;
-	unsigned long frame;
-	int iflag;
-
-	iflag = disable_interrupts();
-	netctl = macb_readl(&macb, EMACB_NCR);
-	netctl |= MACB_BIT(MPE);
-	macb_writel(&macb, EMACB_NCR, netctl);
-	if (iflag)
-		enable_interrupts();
-
-	frame = (MACB_BF(SOF, 1)
-		 | MACB_BF(RW, 2)
-		 | MACB_BF(PHYA, addr)
-		 | MACB_BF(REGA, reg)
-		 | MACB_BF(CODE, 2));
-	macb_writel(&macb, EMACB_MAN, frame);
-
-	do {
-		netstat = macb_readl(&macb, EMACB_NSR);
-	} while (!(netstat & MACB_BIT(IDLE)));
-
-	frame = macb_readl(&macb, EMACB_MAN);
-	*value = MACB_BFEXT(DATA, frame);
-
-	iflag = disable_interrupts();
-	netctl = macb_readl(&macb, EMACB_NCR);
-	netctl &= ~MACB_BIT(MPE);
-	macb_writel(&macb, EMACB_NCR, netctl);
-	if (iflag)
-		enable_interrupts();
-
-	return 0;
-}
-
-int miiphy_write(unsigned char addr, unsigned char reg, unsigned short value)
-{
-	unsigned long netctl;
-	unsigned long netstat;
-	unsigned long frame;
-	int iflag;
-
-	iflag = disable_interrupts();
-	netctl = macb_readl(&macb, EMACB_NCR);
-	netctl |= MACB_BIT(MPE);
-	macb_writel(&macb, EMACB_NCR, netctl);
-	if (iflag)
-		enable_interrupts();
-
-	frame = (MACB_BF(SOF, 1)
-		 | MACB_BF(RW, 1)
-		 | MACB_BF(PHYA, addr)
-		 | MACB_BF(REGA, reg)
-		 | MACB_BF(CODE, 2)
-		 | MACB_BF(DATA, value));
-	macb_writel(&macb, EMACB_MAN, frame);
-
-	do {
-		netstat = macb_readl(&macb, EMACB_NSR);
-	} while (!(netstat & MACB_BIT(IDLE)));
-
-	iflag = disable_interrupts();
-	netctl = macb_readl(&macb, EMACB_NCR);
-	netctl &= ~MACB_BIT(MPE);
-	macb_writel(&macb, EMACB_NCR, netctl);
-	if (iflag)
-		enable_interrupts();
-
+	miiphy_register(netdev->name, macb_miiphy_read, macb_miiphy_write);
+#endif
 	return 0;
 }
 
-- 
1.5.4.3

             reply	other threads:[~2009-12-17 13:07 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-12-17 13:07 Semih Hazar [this message]
2010-02-01  5:26 ` [U-Boot] [PATCH] macb: Fix mii_phy_read and mii_phy_write functions Ben Warren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4B2A2D03.3000407@indefia.com \
    --to=semih.hazar@indefia.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.