[ath9k-devel] trouble with DWA-552 and ath9k

[Brian Walker <walkerbm@charter.net>]

Hi. In config.mk I find no option named CONFIG_ATH9K_DEBUG, but there is 
one named CONFIG_ATH9K_DEBUGFS. Also, as I tried to include in a 
followup to my original post, the output from lspci -vnn is:

00:0a.0 Network controller [0280]: Atheros Communications Inc. AR922X 
Wireless Network Adapter [168c:0029] (rev 01)
     Subsystem: D-Link System Inc Device [1186:3a7a]
     Flags: 66MHz, medium devsel, IRQ 5
     [virtual] Memory at f8040000 (32-bit, non-prefetchable) [size=64K]
     Capabilities: [44] Power Management version 2
     Kernel driver in use: ath9k
     Kernel modules: ath9k

The 168c:0029 seems pretty standard for an Atheros wireless N adapter, 
but I wonder if the 1186:3a7a is a new revision of this card and is 
perhaps not 100% supported yet?

Brian

On 12/17/2009 10:12 PM, Sujith wrote:
> Brian Walker wrote:
>    
>> I recently purchased a DLink DWA-552 that I would like to use with
>> hostapd as an access point. The ath9k driver claims the chipset is:
>>
>> Atheros AR9280 MAC/BB Rev:2 AR5133 RF Rev:d0
>>
>> I have tried both the ath9k that comes with my distribution (Fedora 11)
>> in the 2.6.30.9-102.fc11.i686.PAE kernel and also downloading, building
>> and installing the latest compat-wireless-2.6.tar.bz2 with date
>> 2009-12-11 and rebooting.
>>      
> Can you build compat-wireless with debug enabled ?
> In config.mk, set CONFIG_ATH9K_DEBUG=y, rebuild and reload the driver
> with the module parameter "debug=0x600" and post the kernel log.
>
> Sujith
>
>
>