All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Németh Márton" <nm127@freemail.hu>
To: Jarek Poplawski <jarkao2@gmail.com>
Cc: Roland Dreier <rdreier@cisco.com>,
	Peter Zijlstra <a.p.zijlstra@chello.nl>,
	Andrew Morton <akpm@linux-foundation.org>,
	Mike Galbraith <efault@gmx.de>, Ingo Molnar <mingo@elte.hu>,
	netdev@vger.kernel.org, bugzilla-daemon@bugzilla.kernel.org,
	bugme-daemon@bugzilla.kernel.org
Subject: Re: [Bugme-new] [Bug 14794] New: IP address assigned by DHCP is	dropped after ~40 seconds
Date: Fri, 18 Dec 2009 17:57:53 +0100	[thread overview]
Message-ID: <4B2BB491.5060708@freemail.hu> (raw)
In-Reply-To: <20091218114123.GA8310@ff.dom.local>

[-- Attachment #1: Type: text/plain, Size: 374 bytes --]

Jarek Poplawski wrote:
> happen here. Then dhcp client might hit some limit of tries. On the
> other hand, such an effect could be amplified by changes in 2.6.32
> too (e.g. with different timing). Could you attach 2.6.31 dmesg after
> this test?

OK, here is the dmesg of 2.6.31. In this case I took care about unplug
the network cable only once.

Regards,

	Márton Németh

[-- Attachment #2: dmesg-2.6.31.txt --]
[-- Type: text/plain, Size: 58359 bytes --]

[    0.000000] Linux version 2.6.31 (nmarci@europa) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 PREEMPT Sat Nov 14 09:53:19 CET 2009
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003bf70000 (usable)
[    0.000000]  BIOS-e820: 000000003bf70000 - 000000003bf7a000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003bf7a000 - 000000003bf80000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003bf80000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
[    0.000000] DMI present.
[    0.000000] last_pfn = 0x3bf70 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-D3FFF write-protect
[    0.000000]   D4000-D7FFF uncachable
[    0.000000]   D8000-DBFFF write-protect
[    0.000000]   DC000-DFFFF write-back
[    0.000000]   E0000-E3FFF uncachable
[    0.000000]   E4000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FFC0000000 write-back
[    0.000000]   1 base 003C000000 mask FFFC000000 uncachable
[    0.000000]   2 base 00E0000000 mask FFF0000000 write-combining
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] initial memory mapped : 0 - 01000000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[    0.000000] ACPI: RSDP 000f68d0 00014 (v00 PTLTD )
[    0.000000] ACPI: RSDT 3bf7600b 00030 (v01 PTLTD    RSDT   06040000  LTP 00000000)
[    0.000000] ACPI: FACP 3bf79e87 00074 (v01 AMDK8  PTLTW    06040000 PTL_ 000F4240)
[    0.000000] ACPI: DSDT 3bf7603b 03E4C (v01  VIA   PTL_ACPI 06040000 MSFT 0100000E)
[    0.000000] ACPI: FACS 3bf7afc0 00040
[    0.000000] ACPI: SSDT 3bf79efb 000B5 (v01 PTLTD  POWERNOW 06040000  LTP 00000001)
[    0.000000] ACPI: APIC 3bf79fb0 00050 (v01 PTLTD  	 APIC   06040000  LTP 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 71MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000]   node 0 low ram: 00000000 - 377fe000
[    0.000000]   node 0 bootmap 00008000 - 0000ef00
[    0.000000] (6 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000100000 - 0000aba290]    TEXT DATA BSS ==> [0000100000 - 0000aba290]
[    0.000000]   #2 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
[    0.000000]   #3 [0000abb000 - 0000abf118]              BRK ==> [0000abb000 - 0000abf118]
[    0.000000]   #4 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
[    0.000000]   #5 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
[    0.000000] found SMP MP-table at [c00f6870] f6870
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0003bf70
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0003bf70
[    0.000000] On node 0 totalpages: 245519
[    0.000000] free_area_init_node: node 0, pgdat c04c1be0, node_mem_map c1000000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3967 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 143 pages used for memmap
[    0.000000]   HighMem zone: 18147 pages, LIFO batch:3
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d8000
[    0.000000] PM: Registered nosave memory: 00000000000d8000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bffe0000)
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 243600
[    0.000000] Kernel command line: root=/dev/hda1 ro log_buf_len=1M
[    0.000000] log_buf_len: 1048576
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000377fe:0003bf70)
[    0.000000] Memory: 962276k/982464k available (2631k kernel code, 19540k reserved, 1233k data, 364k init, 73160k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfffa4000 - 0xfffff000   ( 364 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc04c7000 - 0xc0522000   ( 364 kB)
[    0.000000]       .data : 0xc0391d8d - 0xc04c62d8   (1233 kB)
[    0.000000]       .text : 0xc0100000 - 0xc0391d8d   (2631 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:288
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1603.719 MHz processor.
[    0.000999] Console: colour VGA+ 80x25
[    0.000999] console [tty0] enabled
[    0.000999] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000999] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000999] ... MAX_LOCK_DEPTH:          48
[    0.000999] ... MAX_LOCKDEP_KEYS:        8191
[    0.000999] ... CLASSHASH_SIZE:          4096
[    0.000999] ... MAX_LOCKDEP_ENTRIES:     16384
[    0.000999] ... MAX_LOCKDEP_CHAINS:      32768
[    0.000999] ... CHAINHASH_SIZE:          16384
[    0.000999]  memory used by lock dependency info: 3487 kB
[    0.000999]  per task-struct memory footprint: 1152 bytes
[    0.000999] ------------------------
[    0.000999] | Locking API testsuite:
[    0.000999] ----------------------------------------------------------------------------
[    0.000999]                                  | spin |wlock |rlock |mutex | wsem | rsem |
[    0.000999]   --------------------------------------------------------------------------
[    0.000999]                      A-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000999]                  A-B-B-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000999]              A-B-B-C-C-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000999]              A-B-C-A-B-C deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000999]          A-B-B-C-C-D-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000999]          A-B-C-D-B-D-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000999]          A-B-C-D-B-C-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000999]                     double unlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000999]                   initialize held:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000999]                  bad unlock order:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000999]   --------------------------------------------------------------------------
[    0.000999]               recursive read-lock:             |  ok  |             |  ok  |
[    0.000999]            recursive read-lock #2:             |  ok  |             |  ok  |
[    0.000999]             mixed read-write-lock:             |  ok  |             |  ok  |
[    0.000999]             mixed write-read-lock:             |  ok  |             |  ok  |
[    0.000999]   --------------------------------------------------------------------------
[    0.000999]      hard-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
[    0.000999]      soft-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
[    0.000999]      hard-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
[    0.000999]      soft-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
[    0.000999]        sirq-safe-A => hirqs-on/12:  ok  |  ok  |  ok  |
[    0.000999]        sirq-safe-A => hirqs-on/21:  ok  |  ok  |  ok  |
[    0.000999]          hard-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
[    0.000999]          soft-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
[    0.000999]          hard-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
[    0.000999]          soft-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
[    0.000999]       hard-irq lock-inversion/123:  ok  |  ok  |  ok  |
[    0.000999]       soft-irq lock-inversion/123:  ok  |  ok  |  ok  |
[    0.000999]       hard-irq lock-inversion/132:  ok  |  ok  |  ok  |
[    0.000999]       soft-irq lock-inversion/132:  ok  |  ok  |  ok  |
[    0.000999]       hard-irq lock-inversion/213:  ok  |  ok  |  ok  |
[    0.000999]       soft-irq lock-inversion/213:  ok  |  ok  |  ok  |
[    0.000999]       hard-irq lock-inversion/231:  ok  |  ok  |  ok  |
[    0.000999]       soft-irq lock-inversion/231:  ok  |  ok  |  ok  |
[    0.000999]       hard-irq lock-inversion/312:  ok  |  ok  |  ok  |
[    0.000999]       soft-irq lock-inversion/312:  ok  |  ok  |  ok  |
[    0.000999]       hard-irq lock-inversion/321:  ok  |  ok  |  ok  |
[    0.000999]       soft-irq lock-inversion/321:  ok  |  ok  |  ok  |
[    0.000999]       hard-irq read-recursion/123:  ok  |
[    0.000999]       soft-irq read-recursion/123:  ok  |
[    0.000999]       hard-irq read-recursion/132:  ok  |
[    0.000999]       soft-irq read-recursion/132:  ok  |
[    0.000999]       hard-irq read-recursion/213:  ok  |
[    0.000999]       soft-irq read-recursion/213:  ok  |
[    0.000999]       hard-irq read-recursion/231:  ok  |
[    0.000999]       soft-irq read-recursion/231:  ok  |
[    0.000999]       hard-irq read-recursion/312:  ok  |
[    0.000999]       soft-irq read-recursion/312:  ok  |
[    0.000999]       hard-irq read-recursion/321:  ok  |
[    0.000999]       soft-irq read-recursion/321:  ok  |
[    0.000999] -------------------------------------------------------
[    0.000999] Good, all 218 testcases passed! |
[    0.000999] ---------------------------------
[    0.000999] ODEBUG: 4 of 4 active objects replaced
[    0.001045] Calibrating delay loop (skipped), value calculated using timer frequency.. 3207.43 BogoMIPS (lpj=1603719)
[    0.002024] Mount-cache hash table entries: 512
[    0.005220] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.005285] CPU: L2 Cache: 128K (64 bytes/line)
[    0.005343] mce: CPU supports 5 MCE banks
[    0.005430] CPU: Mobile AMD Sempron(tm) Processor 2600+ stepping 00
[    0.005601] Checking 'hlt' instruction... OK.
[    0.009488] ACPI: Core revision 20090521
[    0.013535] BUG: scheduling while atomic: swapper/0/0x10000002
[    0.013595] no locks held by swapper/0.
[    0.013650] Modules linked in:
[    0.013746] Pid: 0, comm: swapper Not tainted 2.6.31 #1
[    0.013803] Call Trace:
[    0.013865]  [<c0389dc5>] ? printk+0x18/0x1b
[    0.013927]  [<c012425d>] __schedule_bug+0x7d/0x90
[    0.013987]  [<c038a527>] schedule+0x457/0x5a0
[    0.014030]  [<c015405b>] ? trace_hardirqs_on+0xb/0x10
[    0.014091]  [<c02bd065>] ? acpi_ps_pop_scope+0x74/0x7f
[    0.014152]  [<c0125ec7>] __cond_resched+0x27/0x40
[    0.014210]  [<c038a715>] _cond_resched+0x25/0x40
[    0.014268]  [<c02bc65f>] acpi_ps_complete_op+0x20f/0x21e
[    0.014328]  [<c02bb9fa>] ? acpi_ps_get_next_simple_arg+0xdb/0xe6
[    0.014388]  [<c02bccd6>] acpi_ps_parse_loop+0x668/0x7b6
[    0.014447]  [<c02bbfda>] acpi_ps_parse_aml+0xcf/0x31f
[    0.014507]  [<c02bb039>] acpi_ns_one_complete_parse+0x109/0x11f
[    0.014567]  [<c02bb083>] acpi_ns_parse_table+0x34/0x71
[    0.014629]  [<c02b8056>] acpi_ns_load_table+0x5e/0xdc
[    0.014689]  [<c02becb4>] acpi_load_tables+0x66/0x139
[    0.014749]  [<c04df15a>] acpi_early_init+0x5d/0xeb
[    0.014810]  [<c04c7765>] start_kernel+0x2a5/0x2f2
[    0.014868]  [<c04c7274>] ? unknown_bootoption+0x0/0x1fb
[    0.014927]  [<c04c703f>] __init_begin+0x3f/0x41
[    0.018048] BUG: scheduling while atomic: swapper/0/0x10000002
[    0.018107] no locks held by swapper/0.
[    0.018162] Modules linked in:
[    0.018255] Pid: 0, comm: swapper Not tainted 2.6.31 #1
[    0.018312] Call Trace:
[    0.018368]  [<c0389dc5>] ? printk+0x18/0x1b
[    0.018426]  [<c012425d>] __schedule_bug+0x7d/0x90
[    0.018486]  [<c038a527>] schedule+0x457/0x5a0
[    0.018544]  [<c02bd1a6>] ? acpi_ps_free_op+0x4c/0x51
[    0.018604]  [<c0125ec7>] __cond_resched+0x27/0x40
[    0.018662]  [<c038a715>] _cond_resched+0x25/0x40
[    0.018720]  [<c02bc65f>] acpi_ps_complete_op+0x20f/0x21e
[    0.018781]  [<c02c2e45>] ? acpi_ut_delete_generic_state+0x13/0x15
[    0.018843]  [<c02a9998>] ? acpi_ds_scope_stack_pop+0xd0/0xda
[    0.018903]  [<c02ab7e7>] ? acpi_ds_load1_end_op+0x1c9/0x1d9
[    0.018963]  [<c02bccd6>] acpi_ps_parse_loop+0x668/0x7b6
[    0.019133]  [<c02bbfda>] acpi_ps_parse_aml+0xcf/0x31f
[    0.019193]  [<c02bb039>] acpi_ns_one_complete_parse+0x109/0x11f
[    0.019253]  [<c02bb083>] acpi_ns_parse_table+0x34/0x71
[    0.019314]  [<c02b8056>] acpi_ns_load_table+0x5e/0xdc
[    0.019373]  [<c02becb4>] acpi_load_tables+0x66/0x139
[    0.019432]  [<c04df15a>] acpi_early_init+0x5d/0xeb
[    0.019492]  [<c04c7765>] start_kernel+0x2a5/0x2f2
[    0.019551]  [<c04c7274>] ? unknown_bootoption+0x0/0x1fb
[    0.019610]  [<c04c703f>] __init_begin+0x3f/0x41
[    0.023044] BUG: scheduling while atomic: swapper/0/0x10000002
[    0.023103] no locks held by swapper/0.
[    0.023158] Modules linked in:
[    0.023252] Pid: 0, comm: swapper Not tainted 2.6.31 #1
[    0.023309] Call Trace:
[    0.023366]  [<c0389dc5>] ? printk+0x18/0x1b
[    0.023425]  [<c012425d>] __schedule_bug+0x7d/0x90
[    0.023484]  [<c038a527>] schedule+0x457/0x5a0
[    0.023542]  [<c02bd1a6>] ? acpi_ps_free_op+0x4c/0x51
[    0.023602]  [<c0125ec7>] __cond_resched+0x27/0x40
[    0.023661]  [<c038a715>] _cond_resched+0x25/0x40
[    0.023719]  [<c02bc65f>] acpi_ps_complete_op+0x20f/0x21e
[    0.023779]  [<c02c2e45>] ? acpi_ut_delete_generic_state+0x13/0x15
[    0.023841]  [<c02a9998>] ? acpi_ds_scope_stack_pop+0xd0/0xda
[    0.023900]  [<c02ab7e7>] ? acpi_ds_load1_end_op+0x1c9/0x1d9
[    0.023960]  [<c02bccd6>] acpi_ps_parse_loop+0x668/0x7b6
[    0.024101]  [<c02bbfda>] acpi_ps_parse_aml+0xcf/0x31f
[    0.024161]  [<c02bb039>] acpi_ns_one_complete_parse+0x109/0x11f
[    0.024221]  [<c02bb083>] acpi_ns_parse_table+0x34/0x71
[    0.024282]  [<c02b8056>] acpi_ns_load_table+0x5e/0xdc
[    0.024342]  [<c02becb4>] acpi_load_tables+0x66/0x139
[    0.024401]  [<c04df15a>] acpi_early_init+0x5d/0xeb
[    0.024461]  [<c04c7765>] start_kernel+0x2a5/0x2f2
[    0.024519]  [<c04c7274>] ? unknown_bootoption+0x0/0x1fb
[    0.024579]  [<c04c703f>] __init_begin+0x3f/0x41
[    0.028017] BUG: scheduling while atomic: swapper/0/0x10000002
[    0.028077] no locks held by swapper/0.
[    0.028131] Modules linked in:
[    0.028225] Pid: 0, comm: swapper Not tainted 2.6.31 #1
[    0.028282] Call Trace:
[    0.028338]  [<c0389dc5>] ? printk+0x18/0x1b
[    0.028396]  [<c012425d>] __schedule_bug+0x7d/0x90
[    0.028455]  [<c038a527>] schedule+0x457/0x5a0
[    0.028513]  [<c015405b>] ? trace_hardirqs_on+0xb/0x10
[    0.028573]  [<c02bd065>] ? acpi_ps_pop_scope+0x74/0x7f
[    0.028632]  [<c0125ec7>] __cond_resched+0x27/0x40
[    0.028691]  [<c038a715>] _cond_resched+0x25/0x40
[    0.028749]  [<c02bc65f>] acpi_ps_complete_op+0x20f/0x21e
[    0.028809]  [<c02bb9fa>] ? acpi_ps_get_next_simple_arg+0xdb/0xe6
[    0.028869]  [<c02bccd6>] acpi_ps_parse_loop+0x668/0x7b6
[    0.028928]  [<c02bbfda>] acpi_ps_parse_aml+0xcf/0x31f
[    0.028987]  [<c02bb039>] acpi_ns_one_complete_parse+0x109/0x11f
[    0.029106]  [<c02bb083>] acpi_ns_parse_table+0x34/0x71
[    0.029167]  [<c02b8056>] acpi_ns_load_table+0x5e/0xdc
[    0.029227]  [<c02becb4>] acpi_load_tables+0x66/0x139
[    0.029287]  [<c04df15a>] acpi_early_init+0x5d/0xeb
[    0.029346]  [<c04c7765>] start_kernel+0x2a5/0x2f2
[    0.029405]  [<c04c7274>] ? unknown_bootoption+0x0/0x1fb
[    0.029465]  [<c04c703f>] __init_begin+0x3f/0x41
[    0.033087] BUG: scheduling while atomic: swapper/0/0x10000002
[    0.033147] no locks held by swapper/0.
[    0.033201] Modules linked in:
[    0.033295] Pid: 0, comm: swapper Not tainted 2.6.31 #1
[    0.033352] Call Trace:
[    0.033409]  [<c0389dc5>] ? printk+0x18/0x1b
[    0.033469]  [<c012425d>] __schedule_bug+0x7d/0x90
[    0.033528]  [<c038a527>] schedule+0x457/0x5a0
[    0.033585]  [<c015405b>] ? trace_hardirqs_on+0xb/0x10
[    0.033645]  [<c02bd065>] ? acpi_ps_pop_scope+0x74/0x7f
[    0.033705]  [<c0125ec7>] __cond_resched+0x27/0x40
[    0.033763]  [<c038a715>] _cond_resched+0x25/0x40
[    0.033821]  [<c02bc65f>] acpi_ps_complete_op+0x20f/0x21e
[    0.033882]  [<c02c2e45>] ? acpi_ut_delete_generic_state+0x13/0x15
[    0.033945]  [<c02a9998>] ? acpi_ds_scope_stack_pop+0xd0/0xda
[    0.034100]  [<c02ab7e7>] ? acpi_ds_load1_end_op+0x1c9/0x1d9
[    0.034160]  [<c02bccd6>] acpi_ps_parse_loop+0x668/0x7b6
[    0.034220]  [<c02bbfda>] acpi_ps_parse_aml+0xcf/0x31f
[    0.034279]  [<c02bb039>] acpi_ns_one_complete_parse+0x109/0x11f
[    0.034340]  [<c02bb083>] acpi_ns_parse_table+0x34/0x71
[    0.034401]  [<c02b8056>] acpi_ns_load_table+0x5e/0xdc
[    0.034461]  [<c02becb4>] acpi_load_tables+0x66/0x139
[    0.034521]  [<c04df15a>] acpi_early_init+0x5d/0xeb
[    0.034580]  [<c04c7765>] start_kernel+0x2a5/0x2f2
[    0.034639]  [<c04c7274>] ? unknown_bootoption+0x0/0x1fb
[    0.034699]  [<c04c703f>] __init_begin+0x3f/0x41
[    0.038013] BUG: scheduling while atomic: swapper/0/0x10000002
[    0.038073] no locks held by swapper/0.
[    0.038128] Modules linked in:
[    0.038222] Pid: 0, comm: swapper Not tainted 2.6.31 #1
[    0.038278] Call Trace:
[    0.038335]  [<c0389dc5>] ? printk+0x18/0x1b
[    0.038394]  [<c012425d>] __schedule_bug+0x7d/0x90
[    0.038452]  [<c038a527>] schedule+0x457/0x5a0
[    0.038510]  [<c015405b>] ? trace_hardirqs_on+0xb/0x10
[    0.038569]  [<c02bd065>] ? acpi_ps_pop_scope+0x74/0x7f
[    0.038629]  [<c0125ec7>] __cond_resched+0x27/0x40
[    0.038688]  [<c038a715>] _cond_resched+0x25/0x40
[    0.038746]  [<c02bc65f>] acpi_ps_complete_op+0x20f/0x21e
[    0.038805]  [<c02bccd6>] acpi_ps_parse_loop+0x668/0x7b6
[    0.038865]  [<c02bbfda>] acpi_ps_parse_aml+0xcf/0x31f
[    0.038924]  [<c02bb039>] acpi_ns_one_complete_parse+0x109/0x11f
[    0.038985]  [<c02bb083>] acpi_ns_parse_table+0x34/0x71
[    0.039109]  [<c02b8056>] acpi_ns_load_table+0x5e/0xdc
[    0.039169]  [<c02becb4>] acpi_load_tables+0x66/0x139
[    0.039229]  [<c04df15a>] acpi_early_init+0x5d/0xeb
[    0.039289]  [<c04c7765>] start_kernel+0x2a5/0x2f2
[    0.039348]  [<c04c7274>] ? unknown_bootoption+0x0/0x1fb
[    0.039407]  [<c04c703f>] __init_begin+0x3f/0x41
[    0.043071] BUG: scheduling while atomic: swapper/0/0x10000002
[    0.043133] no locks held by swapper/0.
[    0.043188] Modules linked in:
[    0.043283] Pid: 0, comm: swapper Not tainted 2.6.31 #1
[    0.043339] Call Trace:
[    0.043398]  [<c0389dc5>] ? printk+0x18/0x1b
[    0.043457]  [<c012425d>] __schedule_bug+0x7d/0x90
[    0.044102]  [<c038a527>] schedule+0x457/0x5a0
[    0.044162]  [<c02bd1a6>] ? acpi_ps_free_op+0x4c/0x51
[    0.044222]  [<c0125ec7>] __cond_resched+0x27/0x40
[    0.044280]  [<c038a715>] _cond_resched+0x25/0x40
[    0.044339]  [<c02bc65f>] acpi_ps_complete_op+0x20f/0x21e
[    0.044399]  [<c02c2e45>] ? acpi_ut_delete_generic_state+0x13/0x15
[    0.044462]  [<c02a9998>] ? acpi_ds_scope_stack_pop+0xd0/0xda
[    0.044522]  [<c02ab7e7>] ? acpi_ds_load1_end_op+0x1c9/0x1d9
[    0.045094]  [<c02bccd6>] acpi_ps_parse_loop+0x668/0x7b6
[    0.045153]  [<c02bbfda>] acpi_ps_parse_aml+0xcf/0x31f
[    0.045213]  [<c02bb039>] acpi_ns_one_complete_parse+0x109/0x11f
[    0.045273]  [<c02bb083>] acpi_ns_parse_table+0x34/0x71
[    0.045335]  [<c02b8056>] acpi_ns_load_table+0x5e/0xdc
[    0.045394]  [<c02becb4>] acpi_load_tables+0x66/0x139
[    0.045454]  [<c04df15a>] acpi_early_init+0x5d/0xeb
[    0.045515]  [<c04c7765>] start_kernel+0x2a5/0x2f2
[    0.045573]  [<c04c7274>] ? unknown_bootoption+0x0/0x1fb
[    0.045633]  [<c04c703f>] __init_begin+0x3f/0x41
[    0.048077] BUG: scheduling while atomic: swapper/0/0x10000002
[    0.048136] no locks held by swapper/0.
[    0.048190] Modules linked in:
[    0.048284] Pid: 0, comm: swapper Not tainted 2.6.31 #1
[    0.048340] Call Trace:
[    0.048396]  [<c0389dc5>] ? printk+0x18/0x1b
[    0.048455]  [<c012425d>] __schedule_bug+0x7d/0x90
[    0.048514]  [<c038a527>] schedule+0x457/0x5a0
[    0.048572]  [<c015405b>] ? trace_hardirqs_on+0xb/0x10
[    0.048632]  [<c02bd065>] ? acpi_ps_pop_scope+0x74/0x7f
[    0.048692]  [<c0125ec7>] __cond_resched+0x27/0x40
[    0.048750]  [<c038a715>] _cond_resched+0x25/0x40
[    0.048808]  [<c02bc65f>] acpi_ps_complete_op+0x20f/0x21e
[    0.048868]  [<c02bb9fa>] ? acpi_ps_get_next_simple_arg+0xdb/0xe6
[    0.048928]  [<c02bccd6>] acpi_ps_parse_loop+0x668/0x7b6
[    0.049105]  [<c02bbfda>] acpi_ps_parse_aml+0xcf/0x31f
[    0.049164]  [<c02bb039>] acpi_ns_one_complete_parse+0x109/0x11f
[    0.049225]  [<c02bb083>] acpi_ns_parse_table+0x34/0x71
[    0.049286]  [<c02b8056>] acpi_ns_load_table+0x5e/0xdc
[    0.049346]  [<c02becb4>] acpi_load_tables+0x66/0x139
[    0.049405]  [<c04df15a>] acpi_early_init+0x5d/0xeb
[    0.049464]  [<c04c7765>] start_kernel+0x2a5/0x2f2
[    0.049522]  [<c04c7274>] ? unknown_bootoption+0x0/0x1fb
[    0.049582]  [<c04c703f>] __init_begin+0x3f/0x41
[    0.053022] BUG: scheduling while atomic: swapper/0/0x10000002
[    0.053082] no locks held by swapper/0.
[    0.053136] Modules linked in:
[    0.053231] Pid: 0, comm: swapper Not tainted 2.6.31 #1
[    0.053287] Call Trace:
[    0.053344]  [<c0389dc5>] ? printk+0x18/0x1b
[    0.053404]  [<c012425d>] __schedule_bug+0x7d/0x90
[    0.053463]  [<c038a527>] schedule+0x457/0x5a0
[    0.053520]  [<c015405b>] ? trace_hardirqs_on+0xb/0x10
[    0.053580]  [<c02bd065>] ? acpi_ps_pop_scope+0x74/0x7f
[    0.053640]  [<c0125ec7>] __cond_resched+0x27/0x40
[    0.053698]  [<c038a715>] _cond_resched+0x25/0x40
[    0.053756]  [<c02bc65f>] acpi_ps_complete_op+0x20f/0x21e
[    0.053816]  [<c02bb9fa>] ? acpi_ps_get_next_simple_arg+0xdb/0xe6
[    0.053877]  [<c02bccd6>] acpi_ps_parse_loop+0x668/0x7b6
[    0.053936]  [<c02bbfda>] acpi_ps_parse_aml+0xcf/0x31f
[    0.054101]  [<c02bb039>] acpi_ns_one_complete_parse+0x109/0x11f
[    0.054162]  [<c02bb083>] acpi_ns_parse_table+0x34/0x71
[    0.054223]  [<c02b8056>] acpi_ns_load_table+0x5e/0xdc
[    0.054283]  [<c02becb4>] acpi_load_tables+0x66/0x139
[    0.054342]  [<c04df15a>] acpi_early_init+0x5d/0xeb
[    0.054403]  [<c04c7765>] start_kernel+0x2a5/0x2f2
[    0.054462]  [<c04c7274>] ? unknown_bootoption+0x0/0x1fb
[    0.054521]  [<c04c703f>] __init_begin+0x3f/0x41
[    0.058049] BUG: scheduling while atomic: swapper/0/0x10000002
[    0.058108] no locks held by swapper/0.
[    0.058163] Modules linked in:
[    0.058257] Pid: 0, comm: swapper Not tainted 2.6.31 #1
[    0.058313] Call Trace:
[    0.058370]  [<c0389dc5>] ? printk+0x18/0x1b
[    0.058429]  [<c012425d>] __schedule_bug+0x7d/0x90
[    0.058488]  [<c038a527>] schedule+0x457/0x5a0
[    0.058546]  [<c02bd1a6>] ? acpi_ps_free_op+0x4c/0x51
[    0.058606]  [<c0125ec7>] __cond_resched+0x27/0x40
[    0.058664]  [<c038a715>] _cond_resched+0x25/0x40
[    0.058723]  [<c02bc65f>] acpi_ps_complete_op+0x20f/0x21e
[    0.058785]  [<c02c2e45>] ? acpi_ut_delete_generic_state+0x13/0x15
[    0.058849]  [<c02a9998>] ? acpi_ds_scope_stack_pop+0xd0/0xda
[    0.058909]  [<c02ab7e7>] ? acpi_ds_load1_end_op+0x1c9/0x1d9
[    0.058969]  [<c02bccd6>] acpi_ps_parse_loop+0x668/0x7b6
[    0.059106]  [<c02bbfda>] acpi_ps_parse_aml+0xcf/0x31f
[    0.059166]  [<c02bb039>] acpi_ns_one_complete_parse+0x109/0x11f
[    0.059227]  [<c02bb083>] acpi_ns_parse_table+0x34/0x71
[    0.059288]  [<c02b8056>] acpi_ns_load_table+0x5e/0xdc
[    0.059348]  [<c02becb4>] acpi_load_tables+0x66/0x139
[    0.059407]  [<c04df15a>] acpi_early_init+0x5d/0xeb
[    0.059467]  [<c04c7765>] start_kernel+0x2a5/0x2f2
[    0.059525]  [<c04c7274>] ? unknown_bootoption+0x0/0x1fb
[    0.059585]  [<c04c703f>] __init_begin+0x3f/0x41
[    0.063031] BUG: scheduling while atomic: swapper/0/0x10000002
[    0.063091] no locks held by swapper/0.
[    0.063146] Modules linked in:
[    0.063239] Pid: 0, comm: swapper Not tainted 2.6.31 #1
[    0.063296] Call Trace:
[    0.063353]  [<c0389dc5>] ? printk+0x18/0x1b
[    0.063413]  [<c012425d>] __schedule_bug+0x7d/0x90
[    0.063472]  [<c038a527>] schedule+0x457/0x5a0
[    0.063530]  [<c015405b>] ? trace_hardirqs_on+0xb/0x10
[    0.063591]  [<c02bd065>] ? acpi_ps_pop_scope+0x74/0x7f
[    0.063651]  [<c0125ec7>] __cond_resched+0x27/0x40
[    0.063710]  [<c038a715>] _cond_resched+0x25/0x40
[    0.063768]  [<c02bc65f>] acpi_ps_complete_op+0x20f/0x21e
[    0.063827]  [<c02ab0d7>] ? acpi_ds_load2_end_op+0x1ae/0x3f1
[    0.063887]  [<c02bccd6>] acpi_ps_parse_loop+0x668/0x7b6
[    0.063947]  [<c02bbfda>] acpi_ps_parse_aml+0xcf/0x31f
[    0.064105]  [<c02bb039>] acpi_ns_one_complete_parse+0x109/0x11f
[    0.064166]  [<c02bb0b5>] acpi_ns_parse_table+0x66/0x71
[    0.064227]  [<c02b8056>] acpi_ns_load_table+0x5e/0xdc
[    0.064286]  [<c02becb4>] acpi_load_tables+0x66/0x139
[    0.064346]  [<c04df15a>] acpi_early_init+0x5d/0xeb
[    0.064406]  [<c04c7765>] start_kernel+0x2a5/0x2f2
[    0.064465]  [<c04c7274>] ? unknown_bootoption+0x0/0x1fb
[    0.064524]  [<c04c703f>] __init_begin+0x3f/0x41
[    0.068249] BUG: scheduling while atomic: swapper/0/0x10000002
[    0.068309] no locks held by swapper/0.
[    0.068364] Modules linked in:
[    0.068458] Pid: 0, comm: swapper Not tainted 2.6.31 #1
[    0.068515] Call Trace:
[    0.068573]  [<c0389dc5>] ? printk+0x18/0x1b
[    0.068632]  [<c012425d>] __schedule_bug+0x7d/0x90
[    0.068691]  [<c038a527>] schedule+0x457/0x5a0
[    0.068749]  [<c02bd1a6>] ? acpi_ps_free_op+0x4c/0x51
[    0.068809]  [<c0125ec7>] __cond_resched+0x27/0x40
[    0.068867]  [<c038a715>] _cond_resched+0x25/0x40
[    0.068925]  [<c02bc65f>] acpi_ps_complete_op+0x20f/0x21e
[    0.069108]  [<c02ab0d7>] ? acpi_ds_load2_end_op+0x1ae/0x3f1
[    0.069169]  [<c02bccd6>] acpi_ps_parse_loop+0x668/0x7b6
[    0.069229]  [<c02bbfda>] acpi_ps_parse_aml+0xcf/0x31f
[    0.069288]  [<c02bb039>] acpi_ns_one_complete_parse+0x109/0x11f
[    0.069349]  [<c02bb0b5>] acpi_ns_parse_table+0x66/0x71
[    0.069411]  [<c02b8056>] acpi_ns_load_table+0x5e/0xdc
[    0.069470]  [<c02becb4>] acpi_load_tables+0x66/0x139
[    0.069530]  [<c04df15a>] acpi_early_init+0x5d/0xeb
[    0.069590]  [<c04c7765>] start_kernel+0x2a5/0x2f2
[    0.069649]  [<c04c7274>] ? unknown_bootoption+0x0/0x1fb
[    0.069709]  [<c04c703f>] __init_begin+0x3f/0x41
[    0.073047] BUG: scheduling while atomic: swapper/0/0x10000002
[    0.073107] no locks held by swapper/0.
[    0.073161] Modules linked in:
[    0.073255] Pid: 0, comm: swapper Not tainted 2.6.31 #1
[    0.073311] Call Trace:
[    0.073369]  [<c0389dc5>] ? printk+0x18/0x1b
[    0.073428]  [<c012425d>] __schedule_bug+0x7d/0x90
[    0.073487]  [<c038a527>] schedule+0x457/0x5a0
[    0.073545]  [<c015405b>] ? trace_hardirqs_on+0xb/0x10
[    0.073604]  [<c02bd065>] ? acpi_ps_pop_scope+0x74/0x7f
[    0.073664]  [<c0125ec7>] __cond_resched+0x27/0x40
[    0.073723]  [<c038a715>] _cond_resched+0x25/0x40
[    0.073781]  [<c02bc65f>] acpi_ps_complete_op+0x20f/0x21e
[    0.073841]  [<c02ab237>] ? acpi_ds_load2_end_op+0x30e/0x3f1
[    0.073901]  [<c02bccd6>] acpi_ps_parse_loop+0x668/0x7b6
[    0.073960]  [<c02bbfda>] acpi_ps_parse_aml+0xcf/0x31f
[    0.074103]  [<c02bb039>] acpi_ns_one_complete_parse+0x109/0x11f
[    0.074164]  [<c02bb0b5>] acpi_ns_parse_table+0x66/0x71
[    0.074226]  [<c02b8056>] acpi_ns_load_table+0x5e/0xdc
[    0.074286]  [<c02becb4>] acpi_load_tables+0x66/0x139
[    0.074346]  [<c04df15a>] acpi_early_init+0x5d/0xeb
[    0.074405]  [<c04c7765>] start_kernel+0x2a5/0x2f2
[    0.074464]  [<c04c7274>] ? unknown_bootoption+0x0/0x1fb
[    0.074523]  [<c04c703f>] __init_begin+0x3f/0x41
[    0.078085] BUG: scheduling while atomic: swapper/0/0x10000002
[    0.078145] no locks held by swapper/0.
[    0.078199] Modules linked in:
[    0.078294] Pid: 0, comm: swapper Not tainted 2.6.31 #1
[    0.078350] Call Trace:
[    0.078407]  [<c0389dc5>] ? printk+0x18/0x1b
[    0.078466]  [<c012425d>] __schedule_bug+0x7d/0x90
[    0.078525]  [<c038a527>] schedule+0x457/0x5a0
[    0.078584]  [<c02bd1a6>] ? acpi_ps_free_op+0x4c/0x51
[    0.078643]  [<c0125ec7>] __cond_resched+0x27/0x40
[    0.078702]  [<c038a715>] _cond_resched+0x25/0x40
[    0.078761]  [<c02bc65f>] acpi_ps_complete_op+0x20f/0x21e
[    0.078820]  [<c02ab0d7>] ? acpi_ds_load2_end_op+0x1ae/0x3f1
[    0.078880]  [<c02bccd6>] acpi_ps_parse_loop+0x668/0x7b6
[    0.078940]  [<c02bbfda>] acpi_ps_parse_aml+0xcf/0x31f
[    0.079099]  [<c02bb039>] acpi_ns_one_complete_parse+0x109/0x11f
[    0.079160]  [<c02bb0b5>] acpi_ns_parse_table+0x66/0x71
[    0.079221]  [<c02b8056>] acpi_ns_load_table+0x5e/0xdc
[    0.080101]  [<c02becb4>] acpi_load_tables+0x66/0x139
[    0.080161]  [<c04df15a>] acpi_early_init+0x5d/0xeb
[    0.080221]  [<c04c7765>] start_kernel+0x2a5/0x2f2
[    0.080280]  [<c04c7274>] ? unknown_bootoption+0x0/0x1fb
[    0.080339]  [<c04c703f>] __init_begin+0x3f/0x41
[    0.083066] BUG: scheduling while atomic: swapper/0/0x10000002
[    0.083125] no locks held by swapper/0.
[    0.083180] Modules linked in:
[    0.083274] Pid: 0, comm: swapper Not tainted 2.6.31 #1
[    0.083330] Call Trace:
[    0.083388]  [<c0389dc5>] ? printk+0x18/0x1b
[    0.083447]  [<c012425d>] __schedule_bug+0x7d/0x90
[    0.083505]  [<c038a527>] schedule+0x457/0x5a0
[    0.083563]  [<c015405b>] ? trace_hardirqs_on+0xb/0x10
[    0.083623]  [<c02bd065>] ? acpi_ps_pop_scope+0x74/0x7f
[    0.083683]  [<c0125ec7>] __cond_resched+0x27/0x40
[    0.083741]  [<c038a715>] _cond_resched+0x25/0x40
[    0.083799]  [<c02bc65f>] acpi_ps_complete_op+0x20f/0x21e
[    0.083859]  [<c02bb9fa>] ? acpi_ps_get_next_simple_arg+0xdb/0xe6
[    0.083919]  [<c02bccd6>] acpi_ps_parse_loop+0x668/0x7b6
[    0.084097]  [<c02bbfda>] acpi_ps_parse_aml+0xcf/0x31f
[    0.084157]  [<c02bb039>] acpi_ns_one_complete_parse+0x109/0x11f
[    0.084218]  [<c02bb0b5>] acpi_ns_parse_table+0x66/0x71
[    0.084279]  [<c02b8056>] acpi_ns_load_table+0x5e/0xdc
[    0.084338]  [<c02becb4>] acpi_load_tables+0x66/0x139
[    0.084398]  [<c04df15a>] acpi_early_init+0x5d/0xeb
[    0.084458]  [<c04c7765>] start_kernel+0x2a5/0x2f2
[    0.084517]  [<c04c7274>] ? unknown_bootoption+0x0/0x1fb
[    0.084576]  [<c04c703f>] __init_begin+0x3f/0x41
[    0.088025] BUG: scheduling while atomic: swapper/0/0x10000002
[    0.088086] no locks held by swapper/0.
[    0.088140] Modules linked in:
[    0.088234] Pid: 0, comm: swapper Not tainted 2.6.31 #1
[    0.088291] Call Trace:
[    0.088349]  [<c0389dc5>] ? printk+0x18/0x1b
[    0.088408]  [<c012425d>] __schedule_bug+0x7d/0x90
[    0.088467]  [<c038a527>] schedule+0x457/0x5a0
[    0.088525]  [<c015405b>] ? trace_hardirqs_on+0xb/0x10
[    0.088586]  [<c02bd065>] ? acpi_ps_pop_scope+0x74/0x7f
[    0.088646]  [<c0125ec7>] __cond_resched+0x27/0x40
[    0.088704]  [<c038a715>] _cond_resched+0x25/0x40
[    0.088762]  [<c02bc65f>] acpi_ps_complete_op+0x20f/0x21e
[    0.088822]  [<c02bccd6>] acpi_ps_parse_loop+0x668/0x7b6
[    0.088882]  [<c02bbfda>] acpi_ps_parse_aml+0xcf/0x31f
[    0.088941]  [<c02bb039>] acpi_ns_one_complete_parse+0x109/0x11f
[    0.089096]  [<c02bb0b5>] acpi_ns_parse_table+0x66/0x71
[    0.089159]  [<c02b8056>] acpi_ns_load_table+0x5e/0xdc
[    0.089218]  [<c02becb4>] acpi_load_tables+0x66/0x139
[    0.089278]  [<c04df15a>] acpi_early_init+0x5d/0xeb
[    0.089339]  [<c04c7765>] start_kernel+0x2a5/0x2f2
[    0.089397]  [<c04c7274>] ? unknown_bootoption+0x0/0x1fb
[    0.089457]  [<c04c703f>] __init_begin+0x3f/0x41
[    0.093015] BUG: scheduling while atomic: swapper/0/0x10000002
[    0.093075] no locks held by swapper/0.
[    0.093130] Modules linked in:
[    0.093223] Pid: 0, comm: swapper Not tainted 2.6.31 #1
[    0.093280] Call Trace:
[    0.093337]  [<c0389dc5>] ? printk+0x18/0x1b
[    0.093397]  [<c012425d>] __schedule_bug+0x7d/0x90
[    0.093456]  [<c038a527>] schedule+0x457/0x5a0
[    0.093514]  [<c015405b>] ? trace_hardirqs_on+0xb/0x10
[    0.093573]  [<c02bd065>] ? acpi_ps_pop_scope+0x74/0x7f
[    0.093633]  [<c0125ec7>] __cond_resched+0x27/0x40
[    0.093692]  [<c038a715>] _cond_resched+0x25/0x40
[    0.093750]  [<c02bc65f>] acpi_ps_complete_op+0x20f/0x21e
[    0.093810]  [<c02bb9fa>] ? acpi_ps_get_next_simple_arg+0xdb/0xe6
[    0.093870]  [<c02bccd6>] acpi_ps_parse_loop+0x668/0x7b6
[    0.093930]  [<c02bbfda>] acpi_ps_parse_aml+0xcf/0x31f
[    0.094097]  [<c02bb039>] acpi_ns_one_complete_parse+0x109/0x11f
[    0.094158]  [<c02bb0b5>] acpi_ns_parse_table+0x66/0x71
[    0.094219]  [<c02b8056>] acpi_ns_load_table+0x5e/0xdc
[    0.094279]  [<c02becb4>] acpi_load_tables+0x66/0x139
[    0.094338]  [<c04df15a>] acpi_early_init+0x5d/0xeb
[    0.094398]  [<c04c7765>] start_kernel+0x2a5/0x2f2
[    0.094457]  [<c04c7274>] ? unknown_bootoption+0x0/0x1fb
[    0.094517]  [<c04c703f>] __init_begin+0x3f/0x41
[    0.097997] BUG: scheduling while atomic: swapper/0/0x10000002
[    0.098056] no locks held by swapper/0.
[    0.098110] Modules linked in:
[    0.098204] Pid: 0, comm: swapper Not tainted 2.6.31 #1
[    0.098261] Call Trace:
[    0.098317]  [<c0389dc5>] ? printk+0x18/0x1b
[    0.098377]  [<c012425d>] __schedule_bug+0x7d/0x90
[    0.098436]  [<c038a527>] schedule+0x457/0x5a0
[    0.098493]  [<c015405b>] ? trace_hardirqs_on+0xb/0x10
[    0.098553]  [<c02bd065>] ? acpi_ps_pop_scope+0x74/0x7f
[    0.098613]  [<c0125ec7>] __cond_resched+0x27/0x40
[    0.098671]  [<c038a715>] _cond_resched+0x25/0x40
[    0.098729]  [<c02bc65f>] acpi_ps_complete_op+0x20f/0x21e
[    0.098789]  [<c02ab202>] ? acpi_ds_load2_end_op+0x2d9/0x3f1
[    0.098849]  [<c02bb9fa>] ? acpi_ps_get_next_simple_arg+0xdb/0xe6
[    0.098909]  [<c02bccd6>] acpi_ps_parse_loop+0x668/0x7b6
[    0.098969]  [<c02bbfda>] acpi_ps_parse_aml+0xcf/0x31f
[    0.099095]  [<c02bb039>] acpi_ns_one_complete_parse+0x109/0x11f
[    0.099156]  [<c02bb0b5>] acpi_ns_parse_table+0x66/0x71
[    0.099217]  [<c02b8056>] acpi_ns_load_table+0x5e/0xdc
[    0.099277]  [<c02becb4>] acpi_load_tables+0x66/0x139
[    0.099336]  [<c04df15a>] acpi_early_init+0x5d/0xeb
[    0.099396]  [<c04c7765>] start_kernel+0x2a5/0x2f2
[    0.099455]  [<c04c7274>] ? unknown_bootoption+0x0/0x1fb
[    0.099514]  [<c04c703f>] __init_begin+0x3f/0x41
[    0.104984] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.120488] NET: Registered protocol family 16
[    0.124845] EISA bus registered
[    0.125096] ACPI: bus type pci registered
[    0.134533] PCI: PCI BIOS revision 2.10 entry at 0xfd88c, last bus=1
[    0.134598] PCI: Using configuration type 1 for base access
[    0.157462] bio: create slab <bio-0> at 0
[    0.161186] ACPI: EC: Look up EC in DSDT
[    0.241732] ACPI: Interpreter enabled
[    0.241798] ACPI: (supports S0 S3 S4 S5)
[    0.242399] ACPI: Using IOAPIC for interrupt routing
[    0.333586] ACPI: EC: non-query interrupt received, switching to interrupt mode
[    0.837043] ACPI: EC: missing confirmations, switch off interrupt mode.
[    0.881277] ACPI: EC: GPE = 0xb, I/O: command/status = 0x66, data = 0x62
[    0.881342] ACPI: EC: driver started in poll mode
[    0.904656] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.906024] pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xefffffff]
[    0.906649] pci 0000:00:01.0: supports D1
[    0.906746] pci 0000:00:08.0: reg 10 io port: [0x1000-0x10ff]
[    0.906756] pci 0000:00:08.0: reg 14 32bit mmio: [0xd0004000-0xd00040ff]
[    0.906807] pci 0000:00:08.0: supports D1 D2
[    0.906811] pci 0000:00:08.0: PME# supported from D1 D2 D3hot D3cold
[    0.906877] pci 0000:00:08.0: PME# disabled
[    0.907020] pci 0000:00:0c.0: reg 10 32bit mmio: [0x000000-0x000fff]
[    0.907045] pci 0000:00:0c.0: supports D1 D2
[    0.907049] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.907111] pci 0000:00:0c.0: PME# disabled
[    0.907238] pci 0000:00:0e.0: reg 10 32bit mmio: [0xd0001000-0xd0001fff]
[    0.907248] pci 0000:00:0e.0: reg 14 32bit mmio: [0xd0000000-0xd0000fff]
[    0.907297] pci 0000:00:0e.0: supports D1 D2
[    0.907301] pci 0000:00:0e.0: PME# supported from D1 D2 D3hot D3cold
[    0.907363] pci 0000:00:0e.0: PME# disabled
[    0.907489] pci 0000:00:0e.1: reg 10 32bit mmio: [0xd0003000-0xd0003fff]
[    0.907499] pci 0000:00:0e.1: reg 14 32bit mmio: [0xd0002000-0xd0002fff]
[    0.907548] pci 0000:00:0e.1: supports D1 D2
[    0.907551] pci 0000:00:0e.1: PME# supported from D1 D2 D3hot D3cold
[    0.907613] pci 0000:00:0e.1: PME# disabled
[    0.907769] pci 0000:00:10.0: reg 20 io port: [0x1c00-0x1c1f]
[    0.907804] pci 0000:00:10.0: supports D1 D2
[    0.907807] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.907869] pci 0000:00:10.0: PME# disabled
[    0.908021] pci 0000:00:10.1: reg 20 io port: [0x1c20-0x1c3f]
[    0.908055] pci 0000:00:10.1: supports D1 D2
[    0.908059] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.908121] pci 0000:00:10.1: PME# disabled
[    0.908266] pci 0000:00:10.2: reg 20 io port: [0x1c40-0x1c5f]
[    0.908300] pci 0000:00:10.2: supports D1 D2
[    0.908304] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.908366] pci 0000:00:10.2: PME# disabled
[    0.908499] pci 0000:00:10.3: reg 10 32bit mmio: [0xd0004400-0xd00044ff]
[    0.908554] pci 0000:00:10.3: supports D1 D2
[    0.908557] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.908619] pci 0000:00:10.3: PME# disabled
[    0.908784] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.908849] pci 0000:00:11.0: quirk: region 4000-407f claimed by vt8235 PM
[    0.908911] pci 0000:00:11.0: quirk: region 8100-810f claimed by vt8235 SMB
[    0.909087] pci 0000:00:11.1: reg 20 io port: [0x1c60-0x1c6f]
[    0.909198] pci 0000:00:11.5: reg 10 io port: [0x1400-0x14ff]
[    0.909255] pci 0000:00:11.5: supports D1 D2
[    0.909330] pci 0000:00:11.6: reg 10 io port: [0x1800-0x18ff]
[    0.909799] pci 0000:01:00.0: reg 10 32bit mmio: [0xf0000000-0xf3ffffff]
[    0.909808] pci 0000:01:00.0: reg 14 32bit mmio: [0xd1000000-0xd1ffffff]
[    0.909830] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x00ffff]
[    0.909853] pci 0000:01:00.0: supports D1 D2
[    0.909906] pci 0000:00:01.0: bridge 32bit mmio: [0xd1000000-0xd1ffffff]
[    0.909914] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf0000000-0xf3ffffff]
[    0.909976] pci_bus 0000:00: on NUMA node 0
[    0.910028] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    1.134965] ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *9, disabled.
[    1.136845] ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *11, disabled.
[    1.138775] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *10, disabled.
[    1.140868] ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *5, disabled.
[    1.143607] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 12 14 15)
[    1.146550] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 12 14 15) *11
[    1.149806] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 11 12 14 15) *10
[    1.152679] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[    1.157603] PCI: Using ACPI for IRQ routing
[    1.205075] pnp: PnP ACPI init
[    1.205278] ACPI: bus type pnp registered
[    1.279521] pnp: PnP ACPI: found 11 devices
[    1.279586] ACPI: ACPI bus type pnp unregistered
[    1.279797] system 00:05: iomem range 0x0-0x9ffff could not be reserved
[    1.279885] system 00:05: iomem range 0xe0000-0xfffff could not be reserved
[    1.279987] system 00:05: iomem range 0xfff00000-0xffffffff could not be reserved
[    1.280079] system 00:05: iomem range 0xffee0000-0xffefffff has been reserved
[    1.280167] system 00:05: iomem range 0xfec00000-0xfec00fff could not be reserved
[    1.280260] system 00:05: iomem range 0xfee00000-0xfee00fff has been reserved
[    1.280393] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[    1.280474] system 00:06: ioport range 0xfe10-0xfe11 has been reserved
[    1.280556] system 00:06: ioport range 0xfe00-0xfe00 has been reserved
[    1.280637] system 00:06: ioport range 0x4000-0x407f has been reserved
[    1.280725] system 00:06: ioport range 0x8100-0x811f could not be reserved
[    1.322090] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xf4000000-0xf3ffffff]
[    1.322173] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    1.322231] pci 0000:00:01.0:   IO window: disabled
[    1.322293] pci 0000:00:01.0:   MEM window: 0xd1000000-0xd1ffffff
[    1.322355] pci 0000:00:01.0:   PREFETCH window: 0xf0000000-0xf3ffffff
[    1.322419] pci 0000:00:0c.0: CardBus bridge, secondary bus 0000:02
[    1.322478] pci 0000:00:0c.0:   IO window: 0x002000-0x0020ff
[    1.322540] pci 0000:00:0c.0:   IO window: 0x002400-0x0024ff
[    1.322601] pci 0000:00:0c.0:   PREFETCH window: 0x40000000-0x43ffffff
[    1.322664] pci 0000:00:0c.0:   MEM window: 0x44000000-0x47ffffff
[    1.322742] pci 0000:00:01.0: setting latency timer to 64
[    1.322753] pci 0000:00:0c.0: enabling device (0000 -> 0003)
[    1.322840] pci 0000:00:0c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.322906] pci 0000:00:0c.0: setting latency timer to 64
[    1.322913] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    1.322917] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    1.322922] pci_bus 0000:01: resource 1 mem: [0xd1000000-0xd1ffffff]
[    1.322926] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf3ffffff]
[    1.322930] pci_bus 0000:02: resource 0 io:  [0x2000-0x20ff]
[    1.322934] pci_bus 0000:02: resource 1 io:  [0x2400-0x24ff]
[    1.322938] pci_bus 0000:02: resource 2 pref mem [0x40000000-0x43ffffff]
[    1.322943] pci_bus 0000:02: resource 3 mem: [0x44000000-0x47ffffff]
[    1.323297] NET: Registered protocol family 2
[    1.323816] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    1.325181] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.327389] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
[    1.333993] TCP: Hash tables configured (established 131072 bind 65536)
[    1.334111] TCP reno registered
[    1.334763] NET: Registered protocol family 1
[    1.346125] audit: initializing netlink socket (disabled)
[    1.346332] type=2000 audit(1261154986.345:1): initialized
[    1.350374] highmem bounce pool size: 64 pages
[    1.352397] msgmni has been set to 1737
[    1.353766] alg: No test for stdrng (krng)
[    1.353921] io scheduler noop registered
[    1.354116] io scheduler cfq registered (default)
[    1.354371] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[    1.354754] pci 0000:01:00.0: Boot video device
[    1.356870] isapnp: Scanning for PnP cards...
[    1.713776] isapnp: No Plug & Play device found
[    1.821964] Switched to high resolution mode on CPU 0
[    2.172108] Uniform Multi-Platform E-IDE driver
[    2.173717] via82cxxx 0000:00:11.1: VIA vt8235 (rev 00) IDE UDMA133
[    2.173791] via82cxxx 0000:00:11.1: IDE controller (0x1106:0x0571 rev 0x06)
[    2.174505] pci 0000:00:11.1: power state changed by ACPI to D0
[    2.175779] ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug
[    2.176923] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 23
[    2.176989] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 23
[    2.177087] pci 0000:00:11.1: PCI INT A -> Link[ALKA] -> GSI 23 (level, low) -> IRQ 23
[    2.177508] via82cxxx 0000:00:11.1: not 100% native mode: will probe irqs later
[    2.177584]     ide0: BM-DMA at 0x1c60-0x1c67
[    2.177660]     ide1: BM-DMA at 0x1c68-0x1c6f
[    2.177731] Probing IDE interface ide0...
[    2.441235] hda: SAMSUNG HM160HC, ATA DISK drive
[    3.054107] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[    3.054192] hda: UDMA/100 mode selected
[    3.054322] Probing IDE interface ide1...
[    3.726233] hdc: Optiarc DVD RW AD-7543A, ATAPI CD/DVD-ROM drive
[    4.338934] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[    4.339093] hdc: UDMA/33 mode selected
[    4.339436] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    4.401179] ide1 at 0x170-0x177,0x376 on irq 15
[    4.409075] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[    4.409615] ide-gd driver 1.18
[    4.410281] hda: max request size: 512KiB
[    4.412228] hda: Host Protected Area detected.
[    4.412230] 	current capacity is 268435456 sectors (137438 MB)
[    4.412232] 	native  capacity is 312581808 sectors (160041 MB)
[    4.412398] hda: 268435456 sectors (137438 MB) w/8192KiB Cache, CHS=16709/255/63
[    4.414145] hda: cache flushes supported
[    4.415173]  hda: hda1 hda2 hda3
[    4.426705] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    4.430769] i8042.c: Detected active multiplexing controller, rev 1.1.
[    4.432415] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.432599] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    4.432685] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    4.432770] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    4.432854] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    4.435641] cpuidle: using governor ladder
[    4.435704] cpuidle: using governor menu
[    4.436596] TCP cubic registered
[    4.436659] NET: Registered protocol family 17
[    4.436872] Using IPI Shortcut mode
[    4.439626] PM: Resume from disk failed.
[    4.439962] kmemleak: Kernel memory leak detector initialized
[    4.441926] kmemleak: Automatic memory scanning thread started
[    4.458628] input: AT Translated Set 2 keyboard as /class/input/input0
[    4.483602] EXT3-fs: mounted filesystem with writeback data mode.
[    4.483841] VFS: Mounted root (ext3 filesystem) readonly on device 3:1.
[    4.484152] Freeing unused kernel memory: 364k freed
[    4.484800] Write protecting the kernel text: 2632k
[    4.484946] Write protecting the kernel read-only data: 980k
[    4.485805] kjournald starting.  Commit interval 5 seconds
[   12.074359] input: Power Button as /class/input/input1
[   12.075063] ACPI: Power Button [PWRF]
[   12.092354] ACPI: AC Adapter [AC] (on-line)
[   12.093488] input: Power Button as /class/input/input2
[   12.094211] ACPI: Power Button [PWB]
[   12.095200] input: Sleep Button as /class/input/input3
[   12.095857] ACPI: Sleep Button [SLPB]
[   12.096887] input: Lid Switch as /class/input/input4
[   12.121111] ACPI: Lid Switch [LID]
[   12.134756] Marking TSC unstable due to TSC halts in idle
[   12.136040] ACPI: CPU0 (power states: C1[C1] C2[C2])
[   12.137036] processor LNXCPU:00: registered as cooling_device0
[   12.152840] ACPI: Invalid active0 threshold
[   12.191417] thermal LNXTHERM:01: registered as thermal_zone0
[   12.191666] ACPI: Thermal Zone [THRM] (61 C)
[   12.668609] ACPI: Battery Slot [BAT0] (battery present)
[   12.752293] parport_pc 00:0a: reported by Plug and Play ACPI
[   12.752585] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   12.802068] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[   12.802898] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   12.955228] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   13.002824] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[   13.002995] rtc0: alarms up to one year, y3k, 242 bytes nvram
[   13.137254] 8139too Fast Ethernet driver 0.9.28
[   13.137533] 8139too 0000:00:08.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[   13.139842] eth0: RealTek RTL8139 at 0xf84ea000, 00:90:f5:3e:5a:ca, IRQ 19
[   13.355103] input: Video Bus as /class/input/input5
[   13.355866] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   13.520925] usbcore: registered new interface driver usbfs
[   13.521417] usbcore: registered new interface driver hub
[   13.521869] usbcore: registered new device driver usb
[   13.710610] yenta_cardbus 0000:00:0c.0: CardBus bridge found [1558:4702]
[   13.710696] yenta_cardbus 0000:00:0c.0: Using CSCINT to route CSC interrupts to PCI
[   13.710767] yenta_cardbus 0000:00:0c.0: Routing CardBus interrupts to PCI
[   13.710831] yenta_cardbus 0000:00:0c.0: TI: mfunc 0x00001002, devctl 0x44
[   13.743020] input: PC Speaker as /class/input/input6
[   13.817304] uhci_hcd: USB Universal Host Controller Interface driver
[   13.833482] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   13.833550] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[   13.859252] ide-cd driver 5.00
[   13.860469] ide-cd: hdc: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
[   13.861101] Uniform CD-ROM driver Revision: 3.20
[   13.935028] yenta_cardbus 0000:00:0c.0: ISA IRQ mask 0x0868, PCI irq 16
[   13.935094] yenta_cardbus 0000:00:0c.0: Socket status: 30000006
[   13.938383] ACPI: PCI Interrupt Link [ALKD] disabled and referenced, BIOS bug
[   13.939532] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 21
[   13.939600] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 21
[   13.939687] uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKD] -> GSI 21 (level, low) -> IRQ 21
[   13.939803] uhci_hcd 0000:00:10.0: UHCI Host Controller
[   13.941750] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[   13.942066] uhci_hcd 0000:00:10.0: irq 21, io base 0x00001c00
[   13.945630] usb usb1: configuration #1 chosen from 1 choice
[   13.947535] hub 1-0:1.0: USB hub found
[   13.948133] hub 1-0:1.0: 2 ports detected
[   13.950746] ehci_hcd 0000:00:10.3: PCI INT D -> Link[ALKD] -> GSI 21 (level, low) -> IRQ 21
[   13.950918] ehci_hcd 0000:00:10.3: EHCI Host Controller
[   13.951153] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 2
[   13.951590] ehci_hcd 0000:00:10.3: irq 21, io mem 0xd0004400
[   13.957087] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00
[   13.959733] usb usb2: configuration #1 chosen from 1 choice
[   13.960959] hub 2-0:1.0: USB hub found
[   13.961225] hub 2-0:1.0: 6 ports detected
[   13.964705] uhci_hcd 0000:00:10.1: PCI INT B -> Link[ALKD] -> GSI 21 (level, low) -> IRQ 21
[   13.964826] uhci_hcd 0000:00:10.1: UHCI Host Controller
[   13.965164] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[   13.965378] uhci_hcd 0000:00:10.1: irq 21, io base 0x00001c20
[   13.967969] usb usb3: configuration #1 chosen from 1 choice
[   13.969044] hub 3-0:1.0: USB hub found
[   13.969299] hub 3-0:1.0: 2 ports detected
[   13.970849] uhci_hcd 0000:00:10.2: PCI INT C -> Link[ALKD] -> GSI 21 (level, low) -> IRQ 21
[   13.970966] uhci_hcd 0000:00:10.2: UHCI Host Controller
[   13.971190] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[   13.971383] uhci_hcd 0000:00:10.2: irq 21, io base 0x00001c40
[   13.973816] usb usb4: configuration #1 chosen from 1 choice
[   13.974871] hub 4-0:1.0: USB hub found
[   13.975158] hub 4-0:1.0: 2 ports detected
[   14.124529] input: PS/2 Mouse as /class/input/input7
[   14.142418] input: AlpsPS/2 ALPS GlidePoint as /class/input/input8
[   15.612603] mice: PS/2 mouse device common for all mice
[   15.818239] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[   15.823888] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[   15.827372] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[   15.829303] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[   15.832426] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[   16.114597] VIA 82xx Audio 0000:00:11.5: power state changed by ACPI to D0
[   16.115827] ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug
[   16.116993] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
[   16.117689] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[   16.117788] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22
[   16.118305] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[   16.661872] VIA 82xx Modem 0000:00:11.6: power state changed by ACPI to D0
[   16.661954] VIA 82xx Modem 0000:00:11.6: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22
[   16.664119] VIA 82xx Modem 0000:00:11.6: setting latency timer to 64
[   18.899118] Adding 1951888k swap on /dev/hda2.  Priority:-1 extents:1 across:1951888k 
[   19.409004] EXT3 FS on hda1, internal journal
[   20.137918] leds_clevo_mail: 'Clevo D410J' found
[   20.138980] Registered led device: clevo::mail
[   20.530313] kjournald starting.  Commit interval 5 seconds
[   20.530437] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[   20.530741] EXT3 FS on hda3, internal journal
[   20.530848] EXT3-fs: mounted filesystem with writeback data mode.
[   23.695732] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[   25.797834] powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 2600+ processors (1 cpu cores) (version 2.20.00)
[   25.799867] powernow-k8:    0 : fid 0x8 (1600 MHz), vid 0x6
[   25.799873] powernow-k8:    1 : fid 0x0 (800 MHz), vid 0x18
[   25.800860] powernow-k8: ph2 null fid transition 0x8
[   27.790579] NET: Registered protocol family 10
[   29.321045] Clocksource tsc unstable (delta = -126469588 ns)
[   29.429803] lp0: using parport0 (interrupt-driven).
[   29.497457] ppdev: user-space parallel port driver
[   38.234029] eth0: no IPv6 routers present
[   43.194967] Linux agpgart interface v0.103
[   43.383072] powernow-k8: Hardware error - pending bit very stuck - no further pstate changes possible
[   43.383089] powernow-k8: transition frequency failed
[   43.402841] [drm] Initialized drm 1.1.0 20060810
[   43.468156] pci 0000:01:00.0: power state changed by ACPI to D0
[   43.468177] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   43.473668] [drm] Initialized via 2.11.1 20070202 for 0000:01:00.0 on minor 0
[   43.491079] powernow-k8: failing targ, change pending bit set
[   43.518726] [drm:via_initialize] *ERROR* called with no agp memory available
[   43.557054] powernow-k8: error - out of sync, fix 0x8 0x0, vid 0x6 0x6
[   54.930042] eth0: no IPv6 routers present
[  305.864919] eth0: link down
[  311.962145] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[  311.962346] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  328.512062] eth0: no IPv6 routers present

  parent reply	other threads:[~2009-12-18 16:58 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <bug-14794-10286@http.bugzilla.kernel.org/>
2009-12-16 23:47 ` [Bugme-new] [Bug 14794] New: IP address assigned by DHCP is dropped after ~40 seconds Andrew Morton
2009-12-17 20:53   ` Németh Márton
2009-12-17 21:20     ` Peter Zijlstra
2009-12-17 21:24     ` Andrew Morton
2009-12-17 21:44       ` Jarek Poplawski
2009-12-18  7:56         ` Németh Márton
2009-12-18  8:16           ` Roland Dreier
2009-12-18 11:41             ` Jarek Poplawski
2009-12-18 16:17               ` Németh Márton
2009-12-18 16:57               ` Németh Márton [this message]
2009-12-18 17:05             ` Németh Márton
2009-12-18  8:22           ` Roland Dreier
2009-12-18 16:49           ` Németh Márton
2009-12-18 20:09             ` Jarek Poplawski
2009-12-19 10:26               ` Németh Márton
2009-12-19 13:48                 ` Jarek Poplawski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4B2BB491.5060708@freemail.hu \
    --to=nm127@freemail.hu \
    --cc=a.p.zijlstra@chello.nl \
    --cc=akpm@linux-foundation.org \
    --cc=bugme-daemon@bugzilla.kernel.org \
    --cc=bugzilla-daemon@bugzilla.kernel.org \
    --cc=efault@gmx.de \
    --cc=jarkao2@gmail.com \
    --cc=mingo@elte.hu \
    --cc=netdev@vger.kernel.org \
    --cc=rdreier@cisco.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.