All of lore.kernel.org
 help / color / mirror / Atom feed
From: Yinghai Lu <yinghai@kernel.org>
To: Jesse Barnes <jbarnes@virtuousgeek.org>,
	Ingo Molnar <mingo@elte.hu>, Thomas Gleixner <tglx@linutronix.de>,
	"H. Peter Anvin" <hpa@zytor.com>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>
Subject: [PATCH 3/7] x86/pci: amd one chain system to use pci read out res
Date: Fri, 18 Dec 2009 12:09:41 -0800	[thread overview]
Message-ID: <4B2BE185.9060505@kernel.org> (raw)
In-Reply-To: <4B2BE063.4040704@kernel.org>


found MSI amd k8 based laptops is hiding [0x70000000, 0x80000000) RAM from
e820.

enable amd one chain even for all.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>

---
 arch/x86/pci/amd_bus.c  |    7 ++++---
 arch/x86/pci/bus_numa.c |    5 -----
 arch/x86/pci/bus_numa.h |    1 -
 3 files changed, 4 insertions(+), 9 deletions(-)

Index: linux-2.6/arch/x86/pci/amd_bus.c
===================================================================
--- linux-2.6.orig/arch/x86/pci/amd_bus.c
+++ linux-2.6/arch/x86/pci/amd_bus.c
@@ -87,11 +87,12 @@ static int __init early_fill_mp_bus_info
 	struct range range[RANGE_NUM];
 	u64 val;
 	u32 address;
+	int found;
 
 	if (!early_pci_allowed())
 		return -1;
 
-	found_all_numa_early = 0;
+	found = 0;
 	for (i = 0; i < ARRAY_SIZE(pci_probes); i++) {
 		u32 id;
 		u16 device;
@@ -105,12 +106,12 @@ static int __init early_fill_mp_bus_info
 		device = (id>>16) & 0xffff;
 		if (pci_probes[i].vendor == vendor &&
 		    pci_probes[i].device == device) {
-			found_all_numa_early = 1;
+			found = 1;
 			break;
 		}
 	}
 
-	if (!found_all_numa_early)
+	if (!found)
 		return 0;
 
 	pci_root_num = 0;
Index: linux-2.6/arch/x86/pci/bus_numa.c
===================================================================
--- linux-2.6.orig/arch/x86/pci/bus_numa.c
+++ linux-2.6/arch/x86/pci/bus_numa.c
@@ -5,7 +5,6 @@
 
 int pci_root_num;
 struct pci_root_info pci_root_info[PCI_ROOT_NR];
-int found_all_numa_early;
 
 void x86_pci_root_bus_res_quirks(struct pci_bus *b)
 {
@@ -21,10 +20,6 @@ void x86_pci_root_bus_res_quirks(struct
 	if (!pci_root_num)
 		return;
 
-	/* for amd, if only one root bus, don't need to do anything */
-	if (pci_root_num < 2 && found_all_numa_early)
-		return;
-
 	for (i = 0; i < pci_root_num; i++) {
 		if (pci_root_info[i].bus_min == b->number)
 			break;
Index: linux-2.6/arch/x86/pci/bus_numa.h
===================================================================
--- linux-2.6.orig/arch/x86/pci/bus_numa.h
+++ linux-2.6/arch/x86/pci/bus_numa.h
@@ -20,7 +20,6 @@ struct pci_root_info {
 #define PCI_ROOT_NR 4
 extern int pci_root_num;
 extern struct pci_root_info pci_root_info[PCI_ROOT_NR];
-extern int found_all_numa_early;
 
 extern void update_res(struct pci_root_info *info, resource_size_t start,
 		      resource_size_t end, unsigned long flags, int merge);


  parent reply	other threads:[~2009-12-18 20:12 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <4B2BE063.4040704@kernel.org>
2009-12-18 20:09 ` [PATCH 1/7] x86/pci: intel ioh bus num reg accessing fix Yinghai Lu
2009-12-18 20:09 ` [PATCH 2/7] x86/pci: use resource_size_t in update_res -v2 Yinghai Lu
2010-01-15 19:49   ` Jesse Barnes
2010-01-15 21:20     ` Yinghai Lu
2010-01-15 21:39       ` Jesse Barnes
2010-01-22  1:55         ` Yinghai Lu
2010-01-25 18:49           ` Jesse Barnes
2009-12-18 20:09 ` Yinghai Lu [this message]
2009-12-18 20:09 ` [PATCH 4/7] x86/pci: use u64 instead of size_t in amd_bus.c -v2 Yinghai Lu
2010-01-15 19:49   ` Jesse Barnes
2010-01-15 21:18     ` Yinghai Lu
2009-12-18 20:09 ` [PATCH 5/7] x86/pci: add cap_resource -v2 Yinghai Lu
2009-12-18 20:09 ` [PATCH 6/7] x86/pci: enable pci root res read out for 32bit too -v3 Yinghai Lu
2009-12-18 20:09 ` [PATCH 7/7] x86/pci: don't check mmconf again if it is from MSR with amd faml0h Yinghai Lu
2010-01-15 19:42   ` Jesse Barnes
2010-01-15 21:16     ` Yinghai Lu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4B2BE185.9060505@kernel.org \
    --to=yinghai@kernel.org \
    --cc=hpa@zytor.com \
    --cc=jbarnes@virtuousgeek.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=mingo@elte.hu \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.