All of lore.kernel.org
 help / color / mirror / Atom feed
From: RONETIX - Asen Dimov <dimov@ronetix.at>
To: linuxppc-dev@lists.ozlabs.org
Subject: MPC8313e RDB rev A4 and rev C network throughput
Date: Tue, 22 Dec 2009 00:27:58 +0200	[thread overview]
Message-ID: <4B2FF66E.7000209@ronetix.at> (raw)

Hello all,
I have made some test on network throughput with MPC8313e RDB revA4 and 
revC.
Some have mentioned that CSB(Coherent System Bus) frequency or untuned 
TCP/IP stack,
could cause decrease of network throughput.

**Test results

-on MPC8313e RDB revA4 with kernel 2.6.20 and u-boot 1.1.6 created with 
ltib-mpc8313erdb-20070824
        iperf -c 172.16.0.1 -l 2m -w 256k
-throughput is 510Mbps


-on MPC8313e RDB revA4 with kernel 2.6.23 and u-boot 1.3.0 generated 
with ltib-mpc8313erdb-20081222
        iperf -c 172.16.0.1 -l 2m -w 256k
-throughput is 510Mbps


-on MPC8313e RDB revC with kernel 2.6.23 (the same u-boot, kernel and 
rootfs as in rev A4, only dtb file differs)
        iperf -c 172.16.0.1 -l 2m -w 256k
-throughput is 360Mbps.


Have someone made such measurements? Any ideas why MPC8313e RDB revC 
gives worser throughput than revA4?

** Notes
*The PC (CPU:Intel(R) Core(TM)2 Duo CPU, E8400 @ 3.00GHz;
         RAM:  2x2G DDR2 @ 800Mhz ;
         NIC: R8168B PCI Express Gigabit Ethernet controller, driver 
8.014.00-NAPI;
         OS: Fedora release 10 (Cambridge) with kernel: 
2.6.27.38-170.2.113.fc10.i686.PAE #1 SMP )
*Commnads to set PC

        ethtool -s eth0 autoneg off speed 1000 duplex full
        ifconfig eth1 172.16.0.1/12 mtu 6000 txqueuelen 10000
        echo 131071 > /proc/sys/net/core/rmem_max
        echo 131071 > /proc/sys/net/core/wmem_max
        echo "4096    1048576   8388608" > /proc/sys/net/ipv4/tcp_rmem
        echo "4096    1048576   8388608" > /proc/sys/net/ipv4/tcp_wmem
        iperf -s -l 2m -w 70k


*The MPC8313e RDB(CPU: 333Mhz; CSB: 166Mhz) revA4 and revC(using PHY not 
switch)
*Commnads to set a board before using iperf

        ifconfig eth1 172.16.0.1/12 mtu 6000 txqueuelen 10000
        #The PC  lan card is set to advertise 1000Mbps only, so the 
board switches to 1000Mbps too.
        echo 131071 > /proc/sys/net/core/rmem_max
        echo 131071 > /proc/sys/net/core/wmem_max
        echo "4096    1048576   8388608" > /proc/sys/net/ipv4/tcp_rmem
        echo "4096    1048576   8388608" > /proc/sys/net/ipv4/tcp_wmem

Regards,
Asen

             reply	other threads:[~2009-12-21 22:33 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-12-21 22:27 RONETIX - Asen Dimov [this message]
2009-12-22  3:47 ` MPC8313e RDB rev A4 and rev C network throughput Liu Dave-R63238
2009-12-22  9:19   ` RONETIX - Asen Dimov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4B2FF66E.7000209@ronetix.at \
    --to=dimov@ronetix.at \
    --cc=linuxppc-dev@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.