From: thomas schorpp <thomas.schorpp@googlemail.com>
To: linux-ide@vger.kernel.org
Subject: HSM violations from ATA PACKET cmd ABRT errors in initial comms with LG GH22 SATA DVDRW
Date: Sun, 27 Dec 2009 21:37:33 +0100 [thread overview]
Message-ID: <4B37C58D.2090200@gmail.com> (raw)
LG GH22NS40 NL01 (possibly Renesas chipset)
VIA8237 SATA (produces basically same errors), Promise SATA II 150 20579 HBAs.
Linux 2.6.32.2
hal polling
devkit polling
wodim
growisofs
port_status 0x20280000 (Data Transfer Overrun Error & Target Device Fault)?
Looks like a hardware combination incompatibility.
Most applicable ATA_HORKAGES in sourcecode already tried.
Not found the sense code yet since FEATURE specific according to T13/1410D revision 3b.
Comments?
y
tom
dmesg |grep -A 10 ata
sata_promise 0000:00:0d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
scsi5 : sata_promise
scsi6 : sata_promise
scsi7 : sata_promise
ata6: SATA max UDMA/133 mmio m4096@0xfbefe000 ata 0xfbefe200 irq 17
ata7: SATA max UDMA/133 mmio m4096@0xfbefe000 ata 0xfbefe280 irq 17
ata8: PATA max UDMA/133 mmio m4096@0xfbefe000 ata 0xfbefe300 irq 17
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: ATAPI: HL-DT-ST DVDRAM GH22NS40, NL01, max UDMA/100
ata6.00: configured for UDMA/100
scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS40 NL01 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
sr 5:0:0:0: Attached scsi CD-ROM sr0
sr 5:0:0:0: Attached scsi generic sg2 type 5
ata7: SATA link down (SStatus 0 SControl 300)
ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata6.00: port_status 0x20280000
sr 5:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 00 00 00 00 40 00
ata6.00: cmd a0/01:00:00:00:fc/00:00:00:00:00/a0 tag 0 dma 131072 in
res 51/54:03:00:00:fc/00:00:00:00:00/e0 Emask 0x2 (HSM violation)
ata6.00: status: { DRDY ERR }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: configured for UDMA/100
ata6: EH complete
...
<period, ~10 times in series>
...
ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata6.00: port_status 0x20280000
sr 5:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 00 00 00 00 02 00
ata6.00: cmd a0/01:00:00:00:10/00:00:00:00:00/a0 tag 0 dma 4096 in
res 51/54:03:00:00:10/00:00:00:00:00/e0 Emask 0x2 (HSM violation)
ata6.00: status: { DRDY ERR }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: configured for UDMA/100
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata6.00: port_status 0x20280000
sr 5:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 00 00 00 00 02 00
ata6.00: cmd a0/01:00:00:00:10/00:00:00:00:00/a0 tag 0 dma 4096 in
res 51/54:03:00:00:10/00:00:00:00:00/e0 Emask 0x2 (HSM violation)
ata6.00: status: { DRDY ERR }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: configured for UDMA/100
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata6.00: port_status 0x20280000
sr 5:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 00 00 00 00 02 00
ata6.00: cmd a0/01:00:00:00:10/00:00:00:00:00/a0 tag 0 dma 4096 in
res 51/54:03:00:00:10/00:00:00:00:00/e0 Emask 0x2 (HSM violation)
ata6.00: status: { DRDY ERR }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: configured for UDMA/100
sr 5:0:0:0: [sr0] Result: hostbyte=0x00 driverbyte=0x08
sr 5:0:0:0: [sr0] Sense Key : 0x5 [current]
Info fld=0x0
sr 5:0:0:0: [sr0] ASC=0x21 ASCQ=0x0
sr 5:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 00 00 00 00 02 00
end_request: I/O error, dev sr0, sector 0
Buffer I/O error on device sr0, logical block 0
Buffer I/O error on device sr0, logical block 1
ata6: EH complete
next reply other threads:[~2009-12-27 20:37 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-27 20:37 thomas schorpp [this message]
2009-12-27 21:43 ` HSM violations from ATA PACKET cmd ABRT errors in initial comms with LG GH22 SATA DVDRW Robert Hancock
2009-12-28 23:44 ` Mikael Pettersson
2009-12-29 9:06 ` thomas schorpp
2009-12-30 22:40 ` thomas schorpp
2009-12-31 11:55 ` thomas schorpp
2010-01-03 21:36 ` Mikael Pettersson
2010-01-04 2:00 ` thomas schorpp
2010-01-04 9:22 ` Mikael Pettersson
2010-01-04 21:06 ` thomas schorpp
2010-01-20 3:00 ` Tejun Heo
2010-01-20 7:57 ` thomas schorpp
2010-01-20 8:51 ` Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B37C58D.2090200@gmail.com \
--to=thomas.schorpp@googlemail.com \
--cc=linux-ide@vger.kernel.org \
--cc=thomas.schorpp@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.